[crw-talk] Fun project for Christmas

[Ron Kaser]

Whomever can please take me off crw-talk E-mail list
Thanks Ron Kaser

------ Original message------
From: Robert Patros
Date: Sat, Nov 28, 2020 10:27 AM
To: crw-talk at crwoodturner.com;
Cc:
Subject:[crw-talk] Fun project for Christmas

These are fun to make. I first made small ornament trees after reading Bob Rosand’s article that I accessed on his website. With this larger walnut blank, I used an 1/8” parting tool. The finish, applied with the lathe running at about 50 rpm, is Master’s Aerosol gloss lacquer. Then, applied Briwax on Liberon 0000 wool.

It was the first time I used spray lacquer. I got a little overzealous on the second coat and sprayed it on too thick. No problem. Let it dry for a while, sand it again, and start over.

[cid:63af88c4-4d3e-41db-8d31-a19c331b7a6e at namprd02.prod.outlook.com]


Sent from my iPhone
_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20201128/94fd4df4/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_5047.jpg
Type: image/jpeg
Size: 1071046 bytes
Desc: IMG_5047.jpg
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20201128/94fd4df4/attachment.jpg>