[crw-talk] Fun project for Christmas

[wisawdust]

Nice looking piece, BobSent from my Galaxy
-------- Original message --------From: Robert Patros <rjpatros05 at gmail.com> Date: 11/28/20  10:27 AM  (GMT-06:00) To: crw-talk at crwoodturner.com Subject: [crw-talk] Fun project for Christmas These are fun to make. I first made small ornament trees after reading Bob Rosand’s article that I accessed on his website. With this larger walnut blank, I used an 1/8” parting tool. The finish, applied with the lathe running at about 50 rpm, is Master’s Aerosol gloss lacquer. Then, applied Briwax on Liberon 0000 wool. It was the first time I used spray lacquer. I got a little overzealous on the second coat and sprayed it on too thick. No problem. Let it dry for a while, sand it again, and start over. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20201128/d92e0136/attachment.html>