[crw-talk] Fun project for Christmas

[Robert Patros]

These are fun to make. I first made small ornament trees after reading Bob Rosand’s article that I accessed on his website. With this larger walnut blank, I used an 1/8” parting tool. The finish, applied with the lathe running at about 50 rpm, is Master’s Aerosol gloss lacquer. Then, applied Briwax on Liberon 0000 wool. 

It was the first time I used spray lacquer. I got a little overzealous on the second coat and sprayed it on too thick. No problem. Let it dry for a while, sand it again, and start over. 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_5047.jpg
Type: image/jpeg
Size: 1071046 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20201128/ee7f3750/attachment.jpg>
-------------- next part --------------


Sent from my iPhone