[crw-talk] Proposal for Ft McCoy

[wisawdust at charter.net]

I think this would be a very beneficial project. If we have 6 lathes,
we would 6 separate outlets, preferably on separate circuits. We run
into problems with multiple lathes on GFI outlets. The setup we have
at A-Line uses a 60 Amp 220 volt circuit. I have had up to 8 lathes on
it with no problems. If we are talking 6 lathes and grinder, we would
need something/someone to transport them. The lathes I have at A-Line
weight about 150 lbs apiece. There are quite a few logistical issues
which need to be worked out.
Duane

	-----------------------------------------From: "James Bloomer" 
To: crw-talk at crwoodturner.com
Cc: 
Sent: Wednesday January 23 2019 12:33:33PM
Subject: [crw-talk] Proposal for Ft McCoy

  Good afternoon, I was able to speak to Ft McCoy about trying for a
Demo/hands-on event on post. I was asked to write up an informal
proposal for them to look at. I have drafted this rough proposal and
ask for any additions or revisions needed since I have not had a
chance to participate in a demo, so I may be missing a piece or two.
Please suggest your revision on the thread versus the attachment so I
don't have multiple version floating about.  
   Many Thanks

  -- 
   James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20190124/d0c3dc08/attachment.html>