[crw-talk] cutn and turnin

[Jerry Molnar]

Thanks very much Bob.  😉
________________________________
From: crw-talk <crw-talk-bounces at crwoodturner.com> on behalf of raaschb at charter.net <raaschb at charter.net>
Sent: Wednesday, August 9, 2023 2:41 PM
To: 'Membership mailing list for the AAW Chapter Coulee Region Woodturners.' <crw-talk at crwoodturner.com>
Subject: Re: [crw-talk] cutn and turnin


Thank you Jerry,

Bandsaw to the pointy things. A little math, or trig or geometry maybe or just plain trial and error.  Pic of the cutn sample project. First cut in 1 plane cut both sides of angle, flip 90 degrees same process.  Touch up with sandpaper as needed.  Square off the points as they may be too fragile.





From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Jerry Molnar
Sent: Wednesday, August 9, 2023 11:40 AM
To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. <crw-talk at crwoodturner.com>
Subject: Re: [crw-talk] cutn and turnin



Nice job Bob.  Something out of the ordinary.  I like how you used a contrasting wood for the dowel and wedge.  How did you cut the textured surfaces?  Thanks.  Jerry

________________________________

From: crw-talk <crw-talk-bounces at crwoodturner.com<mailto:crw-talk-bounces at crwoodturner.com>> on behalf of raaschb at charter.net<mailto:raaschb at charter.net> <raaschb at charter.net<mailto:raaschb at charter.net>>
Sent: Monday, August 7, 2023 9:21 PM
To: CRW-Talk at crwoodturner.com<mailto:CRW-Talk at crwoodturner.com> <CRW-Talk at crwoodturner.com<mailto:CRW-Talk at crwoodturner.com>>
Subject: [crw-talk] cutn and turnin



New skill development for me, a meat tenderizer for a gift.  Maple mallet head, hickory handle  approx. 5”X3”X2” head, 2 axis offset handle 11” including tenon,  walnut wedge and plug. Mineral oil finish.  Tenderizer head pointy things, bandsawn cut at 25 degrees in both directions.  Lots of fixes er design opportunities along the way.



-raasch
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20230810/14357b92/attachment.html>