[crw-talk] Problem solved

[Bob R]

Love that spalted/splayed wood.
Nicely done.

Bob R, Sent from my Phone

On Mar 9, 2021 8:55 AM, Mwt wrote: > > Members, many will recall John Phillips’ wonderful salt cellars.  I decided to make one, put of ash and a top of splayed maple that Shorty Mueller gave me a few years back.  Plan A was to use two rare earth magnets to hold the lid in place so placed one in the base then checked polarity so the top would stay in place, marked it and glued it in the lid.  I had to tap it with a hammer to seat it and the blows with a steel hammer must have flipped the polarity and the lid would not stay centered. Dang!  Spoke with Duane, he suggested I remove one magnet and replace it with steel.  Drilled it out and replaced with a bit of 3/8” bolt, bingo! Thanks Duane.  John > > > > > > > > Sent from my iPhone > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210309/5392750e/attachment.html>