[crw-talk] Shocking End To Bandsaw Wood Preparation

[John & Donna Griffiths]

Whoa!  Kris, thanks so much for this.  My Grizzly now has a strip of 
duct tape over the channel.  I discovered I could barely reach the blade 
edge (stopped of course) with my ring finger poked in the slot.  The 
blade is about 5/8" in from the outside edge and the slot is only about 
7/16" or so wide, but I never thought of that hazard.

------ Original Message ------
From: "Kristine Clough" <mogoldfish at yahoo.com>
To: "Crw-talk" <crw-talk at crwoodturner.com>
Sent: 8/29/2021 7:46:28 PM
Subject: [crw-talk] Shocking End To Bandsaw Wood Preparation

>Hi everyone,
>
>I received these emails for as wood turns every week.  This particular one starts out with band saw safety.  It especially focuses on an area that many of us don't think about.  The area on the left side of the table where the blade comes up from the underside of the table.  I was surprised that this was a Jet bandsaw that had a wide open channel.  I have a craftsman and will have to go check out mine.
>
>Stay safe,
>
>Kris
>
>
>https://www.aswoodturns.com/2021/08/bandsaw-hazard/
>
>Sent from Yahoo Mail on Android 
><https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20210830/4dba776b/attachment.html>