[crw-talk] Hollowing

[Ken Grunke]

Ahh, that's the Johnston/Basham hollowing tool I made. I need to make 
another one, perhaps more than one if anyone's interested.

http://www.crwoodturner.com/gallery/index.php/members/kengrunke/tools4sale-ken/IMG_1515

John, your vase has a nice classic eggish shape, I think you nailed it 
from what I can see. Hope you get it done without incedent!


On 5/4/20 1:47 PM, Mwt wrote:
> Hollowing away in Buffalo Cityville.
> Searching the right wall thickness.
> Maybe a half, will go with 1/4” I guess.
> If it catches it’s my own darn fault.
> *With apologies to Jimmy Buffet.  White ash, 1 1/8” hole, bored to the bottom of the hollow form.  Tools used to hollow were the John Jordan cutter used first then a similar tool with a wider cutter I purchased from Ken Grunke to clean up the interior and arrive at my intended wall thickness.  The depth indicator on the Jordan tool is shop built (evident from the very rough welding on it.)
> Next I will refine the top around the opening, try to perfect the outer profile; then sand and part off.  Slop on a bit of finish and wait for the instant gallery.
> Thanks for reading and be sure to submit your work and the story of it. John Griffiths
>
>
>
>
>
>
>
>
>
>
>
>
>
> Sent from my iPhone
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20200505/f8c00d4c/attachment.html>