[crw-talk] Wet wood $&/#%!

[Robert Patros]

Been there, done that John. I usually put them aside and try to figure out how I can fix em later. I have several waiting on me! 

Sent from my iPhone

> On Apr 15, 2020, at 1:29 PM, Mwt <griff at mwt.net> wrote:
> 
> Hello CRW friends, not everything I turn is an unqualified success.
> A week or so ago I found this piece of mulberry in my wood stash because I was going to be the next Lyle Jamison!  Or so I thought.  Well, the piece turned out nicely as I first cut the outside shape then hollowed it with my homemade Jamison system then used a couple of other hollowing tools I got from club members, Ken Grunke and Jim Frank to get the inside nice and smooth.  Then I refined the outside surface, cut a tenon for later mounting and parted it off from the faceplate.  Lastly I put a few coats of oil finish on the outside and inside to slow the drying and set it aside.  Well, the photos tell the story!  Should’ve nuked it I guess.  Or left it thicker.  Or soaked in DNA.  
> So now it is well ventilated, or should I say, air conditioned.  Just like the old joke about the guy who told his buddy that his hot rod car had 4-60 air conditioning, open all four windows and drive 60 miles per hour!
> John
> 
> <IMG_3316.JPG>
> 
> 
> 
> <IMG_3317.JPG>
> 
> 
> Sent from my iPhone_________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/