[crw-talk] Bandsaw on off?

[Pam Day]

Thanks all

Sent from AOL on Android 
 
  On Fri, Jun 7, 2024 at 10:33 AM, Egan, Richard<EganR at westerntc.edu> wrote:   More than likely the switch. I had to replace mine at some point. The other to consider is the start capacitor on your motor. If it has one, it will be that added lump on the outside of your motor. These are electrolytic caps and dry out over time. If you jumper wires around switch and it starts when you plug it in then switch is bad.


Sent from my Verizon, Samsung Galaxy smartphone


-------- Original message --------From: Pam Day <aamethesta at aol.com> Date: 6/7/24 10:00 AM (GMT-06:00) To: Cwc <crw-talk at crwoodturner.com> Subject: [crw-talk] Bandsaw on off? 
CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe.
I have a jet bandsaw.   When I push the on button nothing happens, I push it off and on a couple times and it will come on.   Do I need to clean out behind on off switch? 

Sent from AOL on Android  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20240607/83dfba60/attachment.html>