[crw-talk] Stabilizing question

[James Bloomer]

Also would agree on a new blank for the harp. You shouldn't need a pressure
pot for crack filling otherwise. it's such a small amount that air bubbles
aren't an issue. I did CA to prep the crack then followed with resin.

On Wed, Feb 22, 2023 at 10:13 AM John & Donna Griffiths <griff at mwt.net>
wrote:

> I second Rich's motion re the stress.  The stabilizer may effect the tones
> it makes too.  j
>
>
> ------ Original Message ------
> From "Egan, Richard" <EganR at westerntc.edu>
> To "Kristine Clough" <mogoldfish at yahoo.com>; "Membership mailing list for
> the AAW Chapter Coulee Region Woodturners." <crw-talk at crwoodturner.com>
> Date 2/22/2023 9:18:03 AM
> Subject Re: [crw-talk] Stabilizing question
>
> I would get some different wood. You will fight that thing all the way
> through and may end up with structure too weak for the intended purpose. Or
> keep it, make something, and use a different blank for the bowl harp.
>
>
>
> *From:* crw-talk <crw-talk-bounces at crwoodturner.com> * On Behalf Of *Kristine
> Clough
> *Sent:* Tuesday, February 21, 2023 8:23 PM
> *To:* Crw-talk <crw-talk at crwoodturner.com>
> *Subject:* [crw-talk] Stabilizing question
>
>
>
> *CAUTION:* This email originated from outside of Western Technical
> College. Do not click links or open attachments unless you recognize the
> sender and know the content is safe.
>
>
>
> I have a piece of cherry that is 12 inches in diameter and about 3 inches
> thick. One of the cracks goes all the way through.   I am looking to
> stabilize this and fill in the cracks.  There also appears to be a little
> bit of punkiness.   Also note that I plan on using this to make a bowl
> harp, so there will be alot of strain on it.
>
>
>
> Is this doable?
>
>
>
> If so, does anyone have a pressure pot big enough that can help me?
>
>
>
> Kris
>
>
>
>
>
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>


-- 
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20230222/98c6b3c1/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 3946725 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20230222/98c6b3c1/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 4125629 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20230222/98c6b3c1/attachment-0001.jpg>