From marine9096 at gmail.com  Thu Nov  3 15:10:18 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Thu, 3 Nov 2022 15:10:18 -0500
Subject: [crw-talk] Luther Skill demo
Message-ID: <CAGK6+hA6kCcbH-4b2dLxbi7df7kbYvmH=wpCH74Qrzzhn2Un6w@mail.gmail.com>

Dan at Luther would like to have another Skill Demo and hands on pen
turning for his classes again.
The Skills Demo is short notice, the 15th of this month. The pen turning
would be in December.
It would be like the last.
Arrive and set up, 12-1
demo from 1-3 or so.
The more demonstrators the better. Different aspects/materials for turning.
If you can't demo then display pieces would also be appreciated.
15th is a Tuesday.
I know Duane and I are interested. I would like to have a set idea by
Tuesday next week. So we can get a gauge on how many demonstrators and make
arrangements to pick up display pieces.


In Service
Jim Bloomer
-- 
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221103/11940683/attachment.html>

From griff at mwt.net  Thu Nov  3 15:39:28 2022
From: griff at mwt.net (John & Donna Griffiths)
Date: Thu, 03 Nov 2022 20:39:28 +0000
Subject: [crw-talk] Luther Skill demo
In-Reply-To: <CAGK6+hA6kCcbH-4b2dLxbi7df7kbYvmH=wpCH74Qrzzhn2Un6w@mail.gmail.com>
References: <CAGK6+hA6kCcbH-4b2dLxbi7df7kbYvmH=wpCH74Qrzzhn2Un6w@mail.gmail.com>
Message-ID: <em2f61d77a-6a54-4ada-935f-ad4f7a16635b@bed8d75b.com>

Count me in for the November 15th one for sure.  John G.


------ Original Message ------
>From "James Bloomer" <marine9096 at gmail.com>
To "CRW talk" <crw-talk at crwoodturner.com>
Date 11/3/2022 3:10:18 PM
Subject [crw-talk] Luther Skill demo

>Dan at Luther would like to have another Skill Demo and hands on pen 
>turning for his classes again.
>The Skills Demo is short notice, the 15th of this month. The pen 
>turning would be in December.
>It would be like the last.
>Arrive and set up, 12-1
>demo from 1-3 or so.
>The more demonstrators the better. Different aspects/materials for 
>turning.
>If you can't demo then display pieces would also be appreciated.
>15th is a Tuesday.
>I know Duane and I are interested. I would like to have a set idea by 
>Tuesday next week. So we can get a gauge on how many demonstrators and 
>make arrangements to pick up display pieces.
>
>
>In Service
>Jim Bloomer
>--
>James A. Bloomer
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221103/7a03e9a4/attachment.html>

From wisawdust at charter.net  Thu Nov  3 16:03:49 2022
From: wisawdust at charter.net (wisawdust)
Date: Thu, 03 Nov 2022 16:03:49 -0500
Subject: [crw-talk] Luther Skill demo
In-Reply-To: <CAGK6+hA6kCcbH-4b2dLxbi7df7kbYvmH=wpCH74Qrzzhn2Un6w@mail.gmail.com>
Message-ID: <mailman.21.1667509443.998929.crw-talk_crwoodturner.com@crwoodturner.com>

I plan on being there.? However, I can't be there u till about 1DuaneSent from my Galaxy
-------- Original message --------From: James Bloomer <marine9096 at gmail.com> Date: 11/3/22  3:12 PM  (GMT-06:00) To: CRW talk <crw-talk at crwoodturner.com> Subject: [crw-talk] Luther Skill demo Dan at Luther would like to have another Skill Demo and hands on pen turning for his classes again.?The Skills Demo is short notice, the 15th of this month. The pen turning would be in December.?It would be like the last.?Arrive and set up, 12-1demo from 1-3 or so.?The more demonstrators the better. Different aspects/materials for turning.?If you can't demo then display pieces would also be appreciated.15th is a Tuesday.??I know Duane and I are interested. I would like to have a set idea by Tuesday next?week. So we can get a gauge on how many demonstrators and make arrangements to pick up display pieces.In ServiceJim Bloomer-- James A. Bloomer
?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221103/c540d951/attachment.html>

From raaschb at charter.net  Thu Nov  3 21:20:01 2022
From: raaschb at charter.net (Bob R)
Date: Thu, 03 Nov 2022 21:20:01 -0500
Subject: [crw-talk] Luther Skill demo
Message-ID: <mailman.22.1667528418.998929.crw-talk_crwoodturner.com@crwoodturner.com>

What kinds of display pieces?
Do we have a glass case in the halls to display works?

I'll try to help on Tues, prob not demo, but lend a hand to support the demo team.
On my calendar!

Bob R, Sent from my Phone
On Nov 3, 2022 3:10 PM, James Bloomer <marine9096 at gmail.com> wrote:
>
> Dan at Luther would like to have another Skill Demo and hands on pen turning for his classes again.?
> The Skills Demo is short notice, the 15th of this month. The pen turning would be in December.?
> It would be like the last.?
> Arrive and set up, 12-1
> demo from 1-3 or so.?
> The more demonstrators the better. Different aspects/materials for turning.?
> If you can't demo then display pieces would also be appreciated.
> 15th is a Tuesday.??
> I know Duane and I are interested. I would like to have a set idea by Tuesday next?week. So we can get a gauge on how many demonstrators and make arrangements to pick up display pieces.
>
>
> In Service
> Jim Bloomer
> -- 
> James A. Bloomer
> ?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221103/150884e6/attachment.html>

From mogoldfish at yahoo.com  Fri Nov  4 05:31:35 2022
From: mogoldfish at yahoo.com (Kristine Clough)
Date: Fri, 4 Nov 2022 10:31:35 +0000 (UTC)
Subject: [crw-talk] Robust tools open house
References: <904221484.133841.1667557895183.ref@mail.yahoo.com>
Message-ID: <904221484.133841.1667557895183@mail.yahoo.com>

I am going to the Robust Tools open house tomorrow if anyone wants a ride.
Kris

Sent from Yahoo Mail on Android 
 
  On Thu, Nov 3, 2022 at 9:20 PM, Bob R<raaschb at charter.net> wrote:   _________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221104/0c94e3d4/attachment.html>

From xfitz at charter.net  Sun Nov  6 09:51:11 2022
From: xfitz at charter.net (xfitz at charter.net)
Date: Sun, 06 Nov 2022 15:51:11 +0000
Subject: [crw-talk] Luther Skill demo
Message-ID: <e12fa9887157319b56db49daead3466e4dcc5321@webmail>

I think I can Help There.Jack

	-----------------------------------------From: "Bob R" 
To: "James Bloomer"
Cc: "CRW talk"
Sent: Thursday November 3 2022 9:20:28PM
Subject: Re: [crw-talk] Luther Skill demo

  What kinds of display pieces? Do we have a glass case in the halls
to display works? 
 I'll try to help on Tues, prob not demo, but lend a hand to support
the demo team. On my calendar! 
 _Bob R, Sent from my Phone_  On Nov 3, 2022 3:10 PM, James Bloomer 
wrote:
 Dan at Luther would like to have another Skill Demo and hands on pen
turning for his classes again. The Skills Demo is short notice, the
15th of this month. The pen turning would be in December.  It would be
like the last.  Arrive and set up, 12-1 demo from 1-3 or so.  The more
demonstrators the better. Different aspects/materials for turning.  If
you can't demo then display pieces would also be appreciated. 15th is
a Tuesday.   I know Duane and I are interested. I would like to have a
set idea by Tuesday next week. So we can get a gauge on how many
demonstrators and make arrangements to pick up display pieces. 

 In Service Jim Bloomer --
 James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221106/49e11cb7/attachment.html>

From mogoldfish at yahoo.com  Sun Nov  6 10:24:17 2022
From: mogoldfish at yahoo.com (Kristine Clough)
Date: Sun, 6 Nov 2022 16:24:17 +0000 (UTC)
Subject: [crw-talk] Luther Skill demo
In-Reply-To: <e12fa9887157319b56db49daead3466e4dcc5321@webmail>
References: <e12fa9887157319b56db49daead3466e4dcc5321@webmail>
Message-ID: <1739957470.379477.1667751857634@mail.yahoo.com>

Are we still having open shop night this Wed??

Sent from Yahoo Mail on Android 
 
  On Sun, Nov 6, 2022 at 9:51 AM, xfitz at charter.net<xfitz at charter.net> wrote:   _________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221106/6102f684/attachment.html>

From wisawdust at charter.net  Mon Nov  7 08:04:05 2022
From: wisawdust at charter.net (wisawdust at charter.net)
Date: Mon, 07 Nov 2022 14:04:05 +0000
Subject: [crw-talk] Correction to Luther HS Skill Demo
Message-ID: <8d0777716bb9e7c1cbc6ac67c122299ed5bf3edd@webmail>

I had my dates wrong for the Luther Skills Demo. The actual is
Tuesday, November 22. Sorry for any confusion. Hope to see you there.
Duane
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221107/ab96f572/attachment.html>

From griff at mwt.net  Mon Nov  7 13:36:19 2022
From: griff at mwt.net (John & Donna Griffiths)
Date: Mon, 07 Nov 2022 19:36:19 +0000
Subject: [crw-talk] Norskedalen on 12/3/22
Message-ID: <em5e238844-40ee-4868-9170-2defdff7bfd1@2c2084df.com>

Hello Members

Quick reminder, I hope you saw my article in the Newsletter about 
Norskedalen.

They are doing a Christmas celebration event on Saturday, December 3 at 
the main site outside of Coon Valley (not the farm before you get to 
Coon Valley from La Crosse on Highway 14 and 61).

I don't have the hours but will at the meeting on Saturday.

We will need a crew to transport a couple lathes etc, attend the event 
and turn as well as chat with those who pass by, and to display the 
myriad of beautiful things we turn. If you can't attend but want to have 
your stuff displayed and possibly sold, send it along.  It will be sort 
of an Instant Gallery display where people can look at our pieces and 
buy so someone will need to have a cash box with some change and a piece 
of paper to keep track of the sales and eventually get the money and 
sales record to Jay for payout.  Remember the club gets 25% of the sales 
so price accordingly.

We will be inside, I think near the big fireplace and there will be a 
table to set up a display.  I think they will have a meal too.

I plan to be at the meeting so contact me if you can help out.  As 
mentioned previously, I can't attend.  You can have an enjoyable day, 
show your turning chops and help out the club, so please attend if 
possible.

John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221107/9990487f/attachment.html>

From johnclough98 at gmail.com  Mon Nov  7 16:19:18 2022
From: johnclough98 at gmail.com (john clough)
Date: Mon, 7 Nov 2022 16:19:18 -0600
Subject: [crw-talk] Norskedalen on 12/3/22
In-Reply-To: <em5e238844-40ee-4868-9170-2defdff7bfd1@2c2084df.com>
References: <em5e238844-40ee-4868-9170-2defdff7bfd1@2c2084df.com>
Message-ID: <CAOBBss+rrabhSKpq0vLikptmnXeYveuhEuapeZ451QPJug5sHw@mail.gmail.com>

Who do you contact for other display of work ?
Johnclough98 at gmail.com

On Mon, Nov 7, 2022, 1:36 PM John & Donna Griffiths <griff at mwt.net> wrote:

> Hello Members
>
> Quick reminder, I hope you saw my article in the Newsletter about
> Norskedalen.
>
> They are doing a Christmas celebration event on Saturday, December 3 at
> the main site outside of Coon Valley (not the farm before you get to Coon
> Valley from La Crosse on Highway 14 and 61).
>
> I don't have the hours but will at the meeting on Saturday.
>
> We will need a crew to transport a couple lathes etc, attend the event and
> turn as well as chat with those who pass by, and to display the myriad of
> beautiful things we turn. If you can't attend but want to have your stuff
> displayed and possibly sold, send it along.  It will be sort of an Instant
> Gallery display where people can look at our pieces and buy so someone will
> need to have a cash box with some change and a piece of paper to keep track
> of the sales and eventually get the money and sales record to Jay for
> payout.  Remember the club gets 25% of the sales so price accordingly.
>
> We will be inside, I think near the big fireplace and there will be a
> table to set up a display.  I think they will have a meal too.
>
> I plan to be at the meeting so contact me if you can help out.  As
> mentioned previously, I can't attend.  You can have an enjoyable day, show
> your turning chops and help out the club, so please attend if possible.
>
> John
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221107/a89104d8/attachment.html>

From griff at mwt.net  Tue Nov  8 14:44:50 2022
From: griff at mwt.net (John & Donna Griffiths)
Date: Tue, 08 Nov 2022 20:44:50 +0000
Subject: [crw-talk] Fw: Re[2]: Norskedalen
Message-ID: <em7b5cd2fe-9771-435d-803c-432b2fa7b23a@d644813f.com>




------ Forwarded Message ------
Members, Hope the wind is not getting to you all.  I just heard from 
Julie Schroeder from Norskedalen about their Christmas fair on December 
3.  Her reply about there time, food and location is below.

Sounds like if your blood sugar and cholesterol are a bit low, you can 
really score here, LOL.  Check just below, John

>Hi, John,
>The hours are from 9:00 to 3:00 on December 3rd. They may stretch an 
>hour on either side but that?s what we?re planning on now. Yes, there 
>will be lots of Norwegian food and baked goods, meatballs, mashed 
>potatoes, lefse, sandbakels, rosettes, etc. All the treats that are 
>made with lots of sugar and butter ?.
>
>The visitor?s center will be filled with lots of different happenings. 
>The homestead will be decorated with Christmas, the blacksmith will be 
>in his shop, and a few others. We are thinking that the woodworkers 
>would be in the shelter with the fire going and the propane heaters 
>heating. There are wooden doors that will be closed on one side, and 
>plastic screens on the side facing the meadow. It?ll be a great 
>location for people to stop when walking between the visitor?s shelter 
>and the homestead. Clean up will be really easy, too. Would your group 
>be okay being in the shelter?
>
>Julie
>
>>On Nov 7, 2022, at 1:38 PM, John & Donna Griffiths <griff at mwt.net> 
>>wrote:
>>
>>Hi Julie, what are the hours for the Christmas celebration?  Will food 
>>be available?
>>
>>We meet this Saturday and I plan to talk up the event.  John
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221108/562d2a44/attachment.html>

From marine9096 at gmail.com  Tue Nov  8 19:33:03 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Tue, 8 Nov 2022 19:33:03 -0600
Subject: [crw-talk] Open Shop night
Message-ID: <CAGK6+hDNsBtqGBX+4GBi9jw8xYuEkf5Ao6a9Q-kLsuo21jHHoA@mail.gmail.com>

Hate to ask, but I have been tasked with a detail at the State Patrol for
today and tomorrow that runs until 6 pm. I will not be able to run open
shop. Will someone be able to cover it? If I can get an answer by noon
tomorrow... otherwise I will have call Dan to cancel


In Service

Jim Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221108/4eb62d42/attachment.html>

From raaschb at charter.net  Tue Nov  8 20:47:51 2022
From: raaschb at charter.net (raaschb at charter.net)
Date: Tue, 8 Nov 2022 20:47:51 -0600
Subject: [crw-talk] Open Shop night
In-Reply-To: <CAGK6+hDNsBtqGBX+4GBi9jw8xYuEkf5Ao6a9Q-kLsuo21jHHoA@mail.gmail.com>
References: <CAGK6+hDNsBtqGBX+4GBi9jw8xYuEkf5Ao6a9Q-kLsuo21jHHoA@mail.gmail.com>
Message-ID: <!&!AAAAAAAAAAAuAAAAAAAAAF3gfGrSs3NKgRZEH6ulIBABAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAACGFcjOo0idQ6x5I7eDFo06AQAAAAA=@charter.net>

Is not that demo for next week?

 

From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of James Bloomer
Sent: Tuesday, November 8, 2022 7:33 PM
To: CRW talk <crw-talk at crwoodturner.com>
Subject: [crw-talk] Open Shop night

 

Hate to ask, but I have been tasked with a detail at the State Patrol for today and tomorrow that runs until 6 pm. I will not be able to run open shop. Will someone be able to cover it? If I can get an answer by noon tomorrow... otherwise I will have call Dan to cancel

 

 

In Service 

 

Jim Bloomer 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221108/f80a7d20/attachment.html>

From marine9096 at gmail.com  Tue Nov  8 21:09:22 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Tue, 8 Nov 2022 21:09:22 -0600
Subject: [crw-talk] Open Shop night
In-Reply-To: <!&!AAAAAAAAAAAuAAAAAAAAAF3gfGrSs3NKgRZEH6ulIBABAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAACGFcjOo0idQ6x5I7eDFo06AQAAAAA=@charter.net>
References: <CAGK6+hDNsBtqGBX+4GBi9jw8xYuEkf5Ao6a9Q-kLsuo21jHHoA@mail.gmail.com>
	<!&!AAAAAAAAAAAuAAAAAAAAAF3gfGrSs3NKgRZEH6ulIBABAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAACGFcjOo0idQ6x5I7eDFo06AQAAAAA=@charter.net>
Message-ID: <CAGK6+hAR9mfdoSqO6zSLPvVTJ-Z=ZcUMG3QCEw8NcKYJH9FUcA@mail.gmail.com>

We still have the open shop...Skills demo is later.

On Tue, Nov 8, 2022, 20:48 <raaschb at charter.net> wrote:

> Is not that demo for next week?
>
>
>
> *From:* crw-talk <crw-talk-bounces at crwoodturner.com> *On Behalf Of *James
> Bloomer
> *Sent:* Tuesday, November 8, 2022 7:33 PM
> *To:* CRW talk <crw-talk at crwoodturner.com>
> *Subject:* [crw-talk] Open Shop night
>
>
>
> Hate to ask, but I have been tasked with a detail at the State Patrol for
> today and tomorrow that runs until 6 pm. I will not be able to run open
> shop. Will someone be able to cover it? If I can get an answer by noon
> tomorrow... otherwise I will have call Dan to cancel
>
>
>
>
>
> In Service
>
>
>
> Jim Bloomer
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221108/46de7a1b/attachment.html>

From wisawdust at charter.net  Fri Nov 11 09:57:46 2022
From: wisawdust at charter.net (wisawdust at charter.net)
Date: Fri, 11 Nov 2022 15:57:46 +0000
Subject: [crw-talk] Friday Night Meeting Prep
Message-ID: <0c315448a21d9fb36319c281ff8bffbde0e0aa55@webmail>

Are we getting together tonight to prep for tomorrow's meeting? If so,
what time. If not, what time tomorrow? What lathe will Mark be using?
Duane
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221111/f2fd9b05/attachment.html>

From griff at mwt.net  Fri Nov 11 11:26:49 2022
From: griff at mwt.net (John & Donna Griffiths)
Date: Fri, 11 Nov 2022 17:26:49 +0000
Subject: [crw-talk] Friday Night Meeting Prep
In-Reply-To: <0c315448a21d9fb36319c281ff8bffbde0e0aa55@webmail>
References: <0c315448a21d9fb36319c281ff8bffbde0e0aa55@webmail>
Message-ID: <emaaa3a38d-7cd5-4a09-840e-1f3ca71b0e01@6259fd51.com>

Mark will use the Jet stand up lathe

John


------ Original Message ------
>From wisawdust at charter.net
To "'crw-talk at crwoodturner.com'" <crw-talk at crwoodturner.com>
Date 11/11/2022 9:57:46 AM
Subject [crw-talk] Friday Night Meeting Prep

>Are we getting together tonight to prep for tomorrow's meeting?  If so, 
>what time.  If not, what time tomorrow?  What lathe will Mark be using?
>
>Duane
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221111/49d76f37/attachment.html>

From rjpatros05 at gmail.com  Fri Nov 11 12:18:22 2022
From: rjpatros05 at gmail.com (Robert Patros)
Date: Fri, 11 Nov 2022 12:18:22 -0600
Subject: [crw-talk] Adhesive question
Message-ID: <19CD25FC-E420-4F33-B81E-1455D9817D5C@gmail.com>

I need to adhere the bandsaw blade to the wood. Any ideas on the best adhesive to use? 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_7443.jpg
Type: image/jpeg
Size: 1527687 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221111/0b6730ab/attachment.jpg>
-------------- next part --------------


Sent from my iPhone

From marine9096 at gmail.com  Fri Nov 11 12:36:51 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Fri, 11 Nov 2022 12:36:51 -0600
Subject: [crw-talk] Adhesive question
In-Reply-To: <19CD25FC-E420-4F33-B81E-1455D9817D5C@gmail.com>
References: <19CD25FC-E420-4F33-B81E-1455D9817D5C@gmail.com>
Message-ID: <CAGK6+hDfB+=Kay8TbvkGhGiptccNPyBYsJXN9eoZ9UnOmUCEaA@mail.gmail.com>

My thought would be 2 part epoxy. What is the intended use for it?

Jim Bloomer

On Fri, Nov 11, 2022, 12:19 Robert Patros <rjpatros05 at gmail.com> wrote:

> I need to adhere the bandsaw blade to the wood. Any ideas on the best
> adhesive to use?
>
>
>
> Sent from my iPhone_________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221111/1411cf83/attachment.html>

From raaschb at charter.net  Fri Nov 11 12:45:50 2022
From: raaschb at charter.net (Bob Raasch)
Date: Fri, 11 Nov 2022 12:45:50 -0600
Subject: [crw-talk] Adhesive question
In-Reply-To: <19CD25FC-E420-4F33-B81E-1455D9817D5C@gmail.com>
References: <19CD25FC-E420-4F33-B81E-1455D9817D5C@gmail.com>
Message-ID: <!&!AAAAAAAAAAAuAAAAAAAAAIJbqsLQcdpHsr1c6iNDSLEBAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAABTd25grMkuR5O3XtbxlX2JAQAAAAA=@charter.net>

How bout good quality epoxy, not the quick set stuff.  Bob R

-----Original Message-----
From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Robert
Patros
Sent: Friday, November 11, 2022 12:18 PM
To: crw-talk at crwoodturner.com
Subject: [crw-talk] Adhesive question

I need to adhere the bandsaw blade to the wood. Any ideas on the best
adhesive to use? 




From rjpatros05 at gmail.com  Fri Nov 11 12:47:56 2022
From: rjpatros05 at gmail.com (Robert Patros)
Date: Fri, 11 Nov 2022 12:47:56 -0600
Subject: [crw-talk] Adhesive question
In-Reply-To: <CAGK6+hDfB+=Kay8TbvkGhGiptccNPyBYsJXN9eoZ9UnOmUCEaA@mail.gmail.com>
References: <CAGK6+hDfB+=Kay8TbvkGhGiptccNPyBYsJXN9eoZ9UnOmUCEaA@mail.gmail.com>
Message-ID: <5880AF58-2C82-4CB0-B7B3-CF147AC6DF77@gmail.com>

I?m making a clock. The wood will hang without pressure on the metal. My go to was two part epoxy but wondered if there  a product made especially for metal on wood. 

Sent from my iPhone

> On Nov 11, 2022, at 12:37 PM, James Bloomer <marine9096 at gmail.com> wrote:
> 
> ?
> My thought would be 2 part epoxy. What is the intended use for it?
> 
> Jim Bloomer 
> 
>> On Fri, Nov 11, 2022, 12:19 Robert Patros <rjpatros05 at gmail.com> wrote:
>> I need to adhere the bandsaw blade to the wood. Any ideas on the best adhesive to use? 
>> 
>> 
>> 
>> Sent from my iPhone_________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221111/16b2c31b/attachment.html>

From rjpatros05 at gmail.com  Fri Nov 11 12:49:01 2022
From: rjpatros05 at gmail.com (Robert Patros)
Date: Fri, 11 Nov 2022 12:49:01 -0600
Subject: [crw-talk] Adhesive question
In-Reply-To: <!&!AAAAAAAAAAAuAAAAAAAAAIJbqsLQcdpHsr1c6iNDSLEBAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAABTd25grMkuR5O3XtbxlX2JAQAAAAA=@charter.net>
References: <!&!AAAAAAAAAAAuAAAAAAAAAIJbqsLQcdpHsr1c6iNDSLEBAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAABTd25grMkuR5O3XtbxlX2JAQAAAAA=@charter.net>
Message-ID: <D82D5E48-114F-487E-A392-30F1C40090D1@gmail.com>

I have 5 minute setup epoxy and that may be my best option. 

Sent from my iPhone

> On Nov 11, 2022, at 12:46 PM, Bob Raasch <raaschb at charter.net> wrote:
> 
> ?How bout good quality epoxy, not the quick set stuff.  Bob R
> 
> -----Original Message-----
> From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Robert
> Patros
> Sent: Friday, November 11, 2022 12:18 PM
> To: crw-talk at crwoodturner.com
> Subject: [crw-talk] Adhesive question
> 
> I need to adhere the bandsaw blade to the wood. Any ideas on the best
> adhesive to use? 
> 
> 
> 
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/


From griff at mwt.net  Fri Nov 11 15:10:48 2022
From: griff at mwt.net (John & Donna Griffiths)
Date: Fri, 11 Nov 2022 21:10:48 +0000
Subject: [crw-talk] Adhesive question
In-Reply-To: <5880AF58-2C82-4CB0-B7B3-CF147AC6DF77@gmail.com>
References: <CAGK6+hDfB+=Kay8TbvkGhGiptccNPyBYsJXN9eoZ9UnOmUCEaA@mail.gmail.com>
	<5880AF58-2C82-4CB0-B7B3-CF147AC6DF77@gmail.com>
Message-ID: <emd4deaa45-8ee9-4cc8-91d8-c8eb4ae3e92a@6259fd51.com>

  I second both James' and Bob Raasch's motions, two part epoxy.  I would 
add, use the slow curing J-B Weld kind.  (J-B Weld makes several grades 
now with different properties and the old style slow cure gets my vote). 
  Please bring the clock to show and tell when it is finished.  John


------ Original Message ------
>From "Robert Patros" <rjpatros05 at gmail.com>
To "Membership mailing list for the AAW Chapter Coulee Region 
Woodturners." <crw-talk at crwoodturner.com>
Date 11/11/2022 12:47:56 PM
Subject Re: [crw-talk] Adhesive question

>I?m making a clock. The wood will hang without pressure on the metal. 
>My go to was two part epoxy but wondered if there  a product made 
>especially for metal on wood.
>
>Sent from my iPhone
>
>>On Nov 11, 2022, at 12:37 PM, James Bloomer <marine9096 at gmail.com> 
>>wrote:
>>
>>?
>>My thought would be 2 part epoxy. What is the intended use for it?
>>
>>Jim Bloomer
>>
>>On Fri, Nov 11, 2022, 12:19 Robert Patros <rjpatros05 at gmail.com> 
>>wrote:
>>>I need to adhere the bandsaw blade to the wood. Any ideas on the best 
>>>adhesive to use?
>>>
>>>
>>>
>>>Sent from my iPhone_________________________________________
>>>Use "Reply to All" or "Reply List" to reach the whole group, "Reply" 
>>>goes only to sender.
>>>______
>>>crw-talk mailing list
>>>crw-talk at crwoodturner.com
>>>http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>>Check the archive to make sure your message was sent: 
>>>http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>_________________________________________
>>Use "Reply to All" or "Reply List" to reach the whole group, "Reply" 
>>goes only to sender.
>>______
>>crw-talk mailing list
>>crw-talk at crwoodturner.com
>>http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>Check the archive to make sure your message was sent: 
>>http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221111/60b76cfa/attachment.html>

From rjpatros05 at gmail.com  Fri Nov 11 15:57:19 2022
From: rjpatros05 at gmail.com (Robert Patros)
Date: Fri, 11 Nov 2022 15:57:19 -0600
Subject: [crw-talk] Adhesive question
In-Reply-To: <emd4deaa45-8ee9-4cc8-91d8-c8eb4ae3e92a@6259fd51.com>
References: <emd4deaa45-8ee9-4cc8-91d8-c8eb4ae3e92a@6259fd51.com>
Message-ID: <C78F7A2F-4AB3-40BB-A2C2-65198F2A424E@gmail.com>

I use JB Weld but it is a 5 minute cure time. I?ll hurry! 

Sent from my iPhone

> On Nov 11, 2022, at 3:11 PM, John & Donna Griffiths <griff at mwt.net> wrote:
> 
> ?
>  I second both James' and Bob Raasch's motions, two part epoxy.  I would add, use the slow curing J-B Weld kind.  (J-B Weld makes several grades now with different properties and the old style slow cure gets my vote).  Please bring the clock to show and tell when it is finished.  John
> 
> 
> ------ Original Message ------
> From "Robert Patros" <rjpatros05 at gmail.com>
> To "Membership mailing list for the AAW Chapter Coulee Region Woodturners." <crw-talk at crwoodturner.com>
> Date 11/11/2022 12:47:56 PM
> Subject Re: [crw-talk] Adhesive question
> 
>> I?m making a clock. The wood will hang without pressure on the metal. My go to was two part epoxy but wondered if there  a product made especially for metal on wood. 
>> 
>> Sent from my iPhone
>> 
>>>> On Nov 11, 2022, at 12:37 PM, James Bloomer <marine9096 at gmail.com> wrote:
>>>> 
>>> ?
>>> My thought would be 2 part epoxy. What is the intended use for it?
>>> 
>>> Jim Bloomer 
>>> 
>>>> On Fri, Nov 11, 2022, 12:19 Robert Patros <rjpatros05 at gmail.com> wrote:
>>>> I need to adhere the bandsaw blade to the wood. Any ideas on the best adhesive to use? 
>>>> 
>>>> 
>>>> 
>>>> Sent from my iPhone_________________________________________
>>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>>>> ______
>>>> crw-talk mailing list
>>>> crw-talk at crwoodturner.com
>>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>> _________________________________________
>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>>> ______
>>> crw-talk mailing list
>>> crw-talk at crwoodturner.com
>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221111/b841f915/attachment.html>

From raaschb at charter.net  Fri Nov 11 16:03:17 2022
From: raaschb at charter.net (Bob Raasch)
Date: Fri, 11 Nov 2022 16:03:17 -0600
Subject: [crw-talk] Adhesive question
In-Reply-To: <C78F7A2F-4AB3-40BB-A2C2-65198F2A424E@gmail.com>
References: <emd4deaa45-8ee9-4cc8-91d8-c8eb4ae3e92a@6259fd51.com>
	<C78F7A2F-4AB3-40BB-A2C2-65198F2A424E@gmail.com>
Message-ID: <!&!AAAAAAAAAAAuAAAAAAAAAIJbqsLQcdpHsr1c6iNDSLEBAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAABgnLpDCh05QI++QwiMcTlYAQAAAAA=@charter.net>

Anyone know if club setup will be held tonight at Ona Luther? If so, what time?

 

From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Robert Patros
Sent: Friday, November 11, 2022 3:57 PM
To: John & Donna Griffiths <griff at mwt.net>; Membership mailing list for the AAW Chapter Coulee Region Woodturners. <crw-talk at crwoodturner.com>
Subject: Re: [crw-talk] Adhesive question

 

I use JB Weld but it is a 5 minute cure time. I?ll hurry! 

Sent from my iPhone





On Nov 11, 2022, at 3:11 PM, John & Donna Griffiths <griff at mwt.net <mailto:griff at mwt.net> > wrote:

?

 I second both James' and Bob Raasch's motions, two part epoxy.  I would add, use the slow curing J-B Weld kind.  (J-B Weld makes several grades now with different properties and the old style slow cure gets my vote).  Please bring the clock to show and tell when it is finished.  John

 

 

------ Original Message ------

>From "Robert Patros" <rjpatros05 at gmail.com <mailto:rjpatros05 at gmail.com> >

To "Membership mailing list for the AAW Chapter Coulee Region Woodturners." <crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> >

Date 11/11/2022 12:47:56 PM

Subject Re: [crw-talk] Adhesive question

 

I?m making a clock. The wood will hang without pressure on the metal. My go to was two part epoxy but wondered if there  a product made especially for metal on wood. 

Sent from my iPhone





On Nov 11, 2022, at 12:37 PM, James Bloomer <marine9096 at gmail.com <mailto:marine9096 at gmail.com> > wrote:

?

My thought would be 2 part epoxy. What is the intended use for it?

 

Jim Bloomer 

 

On Fri, Nov 11, 2022, 12:19 Robert Patros <rjpatros05 at gmail.com <mailto:rjpatros05 at gmail.com> > wrote:

I need to adhere the bandsaw blade to the wood. Any ideas on the best adhesive to use? 



Sent from my iPhone_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> 
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/

_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> 
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/

_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> 
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221111/19f8e845/attachment.html>

From raaschb at charter.net  Fri Nov 11 18:04:18 2022
From: raaschb at charter.net (Bob Raasch)
Date: Fri, 11 Nov 2022 18:04:18 -0600
Subject: [crw-talk] Mail server archive link
Message-ID: <!&!AAAAAAAAAAAuAAAAAAAAAIJbqsLQcdpHsr1c6iNDSLEBAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAAAa6fTzuMkDSqZNwkDO8N1FAQAAAAA=@charter.net>

Once again, 'I'm not regularly getting club emails. Others may also be in
this same boat.

 

I did not see the email sent by Duane Hill today, Nov 11 asking about club
setup for Saturday Nov 12. You can always check the CRW mail server archive
24/7, which preserves all of the emails, and it goes waaaaay back in time.
Its damn easy to navigate thanks to the way Ken G. has it set up.

 

An easy way to check the archive is this. Well, at least on my home desktop
computer this works.  

1.	Open this email sent to you.
2.	Save this email to your desktop.  Select   File, Save As, Select
Desktop. Use the default file name  and Select Save in the box below.  It
may save the file on your desktop as this   "CRW archive web link.msg"
3.	To open the file, go to your desktop, find the file named as above -
"CRW archive web link.msg"
4.	Just click on it to open (you may have double click on the file to
open it), 
 then ctrl+Click  on the
http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ link below to
open the archive file containing all of the archived messages. It's
easy-peasy from there.

 

At least that how it works on my Windows PC. Don't know bout  MAC computers,
laptops, smartphones, tablets (stone or otherwise), etc.

 

http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/

 

Hope this helps.   Bob R

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221111/95ebceea/attachment.html>

From wisawdust at charter.net  Sat Nov 12 07:32:49 2022
From: wisawdust at charter.net (wisawdust)
Date: Sat, 12 Nov 2022 07:32:49 -0600
Subject: [crw-talk] Friday Night Meeting Prep
In-Reply-To: <0c315448a21d9fb36319c281ff8bffbde0e0aa55@webmail>
Message-ID: <mailman.23.1668259984.998929.crw-talk_crwoodturner.com@crwoodturner.com>

I am at Luther and have the shop open.? Anybody know what lathe and where we will be setting up?Sent from my Galaxy
-------- Original message --------From: wisawdust at charter.net Date: 11/11/22  9:58 AM  (GMT-06:00) To: "'crw-talk at crwoodturner.com'" <crw-talk at crwoodturner.com> Subject: [crw-talk] Friday Night Meeting Prep Are we getting together tonight to prep for tomorrow's meeting?? If so, what time.? If not, what time tomorrow?? What lathe will Mark be using?Duane
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221112/cda9f88e/attachment.html>

From aamethesta at aol.com  Sat Nov 12 07:45:25 2022
From: aamethesta at aol.com (Pam Day)
Date: Sat, 12 Nov 2022 13:45:25 +0000 (UTC)
Subject: [crw-talk] Friday Night Meeting Prep
References: <0c315448a21d9fb36319c281ff8bffbde0e0aa55@webmail>
Message-ID: <535530094.127700.1668260725895@mail.yahoo.com>

The Jet stand up I think I read somewhere.?

Sent from the all new AOL app for Android 
 
  On Sat, Nov 12, 2022 at 7:33 AM, wisawdust<wisawdust at charter.net> wrote:   _________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221112/e659b9e6/attachment.html>

From EganR at westerntc.edu  Sat Nov 12 11:02:51 2022
From: EganR at westerntc.edu (Egan, Richard)
Date: Sat, 12 Nov 2022 17:02:51 +0000
Subject: [crw-talk] Mail server archive link
In-Reply-To: <!&!AAAAAAAAAAAuAAAAAAAAAIJbqsLQcdpHsr1c6iNDSLEBAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAAAa6fTzuMkDSqZNwkDO8N1FAQAAAAA=@charter.net>
References: <!&!AAAAAAAAAAAuAAAAAAAAAIJbqsLQcdpHsr1c6iNDSLEBAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAAAa6fTzuMkDSqZNwkDO8N1FAQAAAAA=@charter.net>
Message-ID: <BN7PR03MB3699F2293246BDD4F685CE44A4039@BN7PR03MB3699.namprd03.prod.outlook.com>

That is handy Bob. I somehow missed getting last couple of newsletters.



Sent from my Verizon, Samsung Galaxy smartphone



-------- Original message --------
From: Bob Raasch <raaschb at charter.net>
Date: 11/11/22 6:04 PM (GMT-06:00)
To: "'Membership mailing list for the AAW Chapter Coulee Region Woodturners.'" <crw-talk at crwoodturner.com>
Subject: [crw-talk] Mail server archive link

CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe.

Once again, ?I?m not regularly getting club emails. Others may also be in this same boat.

I did not see the email sent by Duane Hill today, Nov 11 asking about club setup for Saturday Nov 12. You can always check the CRW mail server archive 24/7, which preserves all of the emails, and it goes waaaaay back in time. Its damn easy to navigate thanks to the way Ken G. has it set up.

An easy way to check the archive is this. Well, at least on my home desktop computer this works.

  1.  Open this email sent to you.
  2.  Save this email to your desktop.  Select   File, Save As, Select Desktop. Use the default file name  and Select Save in the box below.  It may save the file on your desktop as this   ?CRW archive web link.msg?
  3.  To open the file, go to your desktop, find the file named as above ? ?CRW archive web link.msg?
  4.  Just click on it to open (you may have double click on the file to open it),
 then ctrl+Click  on the http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ link below to open the archive file containing all of the archived messages. It?s easy-peasy from there.


At least that how it works on my Windows PC. Don?t know bout  MAC computers, laptops, smartphones, tablets (stone or otherwise), etc.

http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/

Hope this helps.   Bob R
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221112/24aa879a/attachment.html>

From mogoldfish at yahoo.com  Sat Nov 12 15:25:08 2022
From: mogoldfish at yahoo.com (Kristine Clough)
Date: Sat, 12 Nov 2022 21:25:08 +0000 (UTC)
Subject: [crw-talk] Mail server archive link
In-Reply-To: <BN7PR03MB3699F2293246BDD4F685CE44A4039@BN7PR03MB3699.namprd03.prod.outlook.com>
References: <!&!AAAAAAAAAAAuAAAAAAAAAIJbqsLQcdpHsr1c6iNDSLEBAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAAAa6fTzuMkDSqZNwkDO8N1FAQAAAAA=@charter.net>
	<BN7PR03MB3699F2293246BDD4F685CE44A4039@BN7PR03MB3699.namprd03.prod.outlook.com>
Message-ID: <981383422.210244.1668288308510@mail.yahoo.com>

Rich,?
Aaron is sending the newsletters out without using the crw talk server.? Please email him with your current address.? ?Aaronagesicki at gmail.com?
Kris

Sent from Yahoo Mail on Android 
 
  On Sat, Nov 12, 2022 at 11:03 AM, Egan, Richard<EganR at westerntc.edu> wrote:   _________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221112/2f12b0c6/attachment.html>

From props at charter.net  Sun Nov 13 17:19:50 2022
From: props at charter.net (props at charter.net)
Date: Sun, 13 Nov 2022 17:19:50 -0600
Subject: [crw-talk] FW: Looking for advise on coring tool
Message-ID: <001a01d8f7b6$6e331660$4a994320$@charter.net>

 

 

 

I have a 14in Jet Lathe and I am looking at purchasing a bowl coring add on
too my Jet.

 

Does anyone have any recommendations in this area?

 

Paul

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221113/89133fe0/attachment.html>

From raaschb at charter.net  Sun Nov 13 23:33:38 2022
From: raaschb at charter.net (Bob Raasch)
Date: Sun, 13 Nov 2022 23:33:38 -0600
Subject: [crw-talk] FW: Looking for advise on coring tool
In-Reply-To: <001a01d8f7b6$6e331660$4a994320$@charter.net>
References: <001a01d8f7b6$6e331660$4a994320$@charter.net>
Message-ID: <!&!AAAAAAAAAAAuAAAAAAAAAIJbqsLQcdpHsr1c6iNDSLEBAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAAAaxwD/hU5LRYukWnWObqSkAQAAAAA=@charter.net>

Paul, 

Do you have enough power? If so, the rig that Jim Frank had might be a
consideration. Can't recall the name of it.  John Clough may know?  BR

 

From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of
props at charter.net
Sent: Sunday, November 13, 2022 5:20 PM
To: crw-talk <crw-talk at crwoodturner.com>
Subject: [crw-talk] FW: Looking for advise on coring tool

 

 

 

 

I have a 14in Jet Lathe and I am looking at purchasing a bowl coring add on
too my Jet.

 

Does anyone have any recommendations in this area?

 

Paul

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221113/9b5946b6/attachment.html>

From moorecheck at gmail.com  Mon Nov 14 05:36:08 2022
From: moorecheck at gmail.com (Daniel Check)
Date: Mon, 14 Nov 2022 05:36:08 -0600
Subject: [crw-talk] FW: Looking for advise on coring tool
In-Reply-To: <!&!AAAAAAAAAAAuAAAAAAAAAIJbqsLQcdpHsr1c6iNDSLEBAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAAAaxwD/hU5LRYukWnWObqSkAQAAAAA=@charter.net>
References: <001a01d8f7b6$6e331660$4a994320$@charter.net>
	<!&!AAAAAAAAAAAuAAAAAAAAAIJbqsLQcdpHsr1c6iNDSLEBAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAAAaxwD/hU5LRYukWnWObqSkAQAAAAA=@charter.net>
Message-ID: <CANhL+YSGKfn2xcqmtKDSk_v8Y9yTsYe46e=v4VTdf7uNpELugQ@mail.gmail.com>

Jim had a oneway easy core system.  I know they are made for smaller
lathes.  They are easy to learn. You might want to look into the
requirements.
Dan Check.

On Sun, Nov 13, 2022 at 11:34 PM Bob Raasch <raaschb at charter.net> wrote:

> Paul,
>
> Do you have enough power? If so, the rig that Jim Frank had might be a
> consideration. Can?t recall the name of it.  John Clough may know?  BR
>
>
>
> *From:* crw-talk <crw-talk-bounces at crwoodturner.com> *On Behalf Of *
> props at charter.net
> *Sent:* Sunday, November 13, 2022 5:20 PM
> *To:* crw-talk <crw-talk at crwoodturner.com>
> *Subject:* [crw-talk] FW: Looking for advise on coring tool
>
>
>
>
>
>
>
>
>
> I have a 14in Jet Lathe and I am looking at purchasing a bowl coring add
> on too my Jet.
>
>
>
> Does anyone have any recommendations in this area?
>
>
>
> Paul
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221114/7ad8571d/attachment.html>

From mwinfrey501 at gmail.com  Wed Nov 16 09:33:19 2022
From: mwinfrey501 at gmail.com (Michael Winfrey)
Date: Wed, 16 Nov 2022 09:33:19 -0600
Subject: [crw-talk] Adhesive question
In-Reply-To: <19CD25FC-E420-4F33-B81E-1455D9817D5C@gmail.com>
References: <19CD25FC-E420-4F33-B81E-1455D9817D5C@gmail.com>
Message-ID: <CABAUYPxp7+jjCaUAVUXg1=orhNj3PCSHqjHAon9j0yJaJiR3Ow@mail.gmail.com>

No idea how to stick the blade to the wood, but recognized the dark streak
in what looks like maple.   I make maple syrup and the tap holes we drill
in the tree heal up but leave that streak that goes 2-3 feet above and
below the tap hole.

Not sure if you knew what that was.  I've thought of using maple paneling
in my sugar house with those streaks.

On Fri, Nov 11, 2022, 12:19 PM Robert Patros <rjpatros05 at gmail.com> wrote:

> I need to adhere the bandsaw blade to the wood. Any ideas on the best
> adhesive to use?
>
>
>
> Sent from my iPhone_________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221116/fe0d47c7/attachment.html>

From rjpatros05 at gmail.com  Wed Nov 16 09:38:05 2022
From: rjpatros05 at gmail.com (Robert Patros)
Date: Wed, 16 Nov 2022 09:38:05 -0600
Subject: [crw-talk] Adhesive question
In-Reply-To: <CABAUYPxp7+jjCaUAVUXg1=orhNj3PCSHqjHAon9j0yJaJiR3Ow@mail.gmail.com>
References: <CABAUYPxp7+jjCaUAVUXg1=orhNj3PCSHqjHAon9j0yJaJiR3Ow@mail.gmail.com>
Message-ID: <1F1D1FE0-B26E-414A-AE9F-75058A560AC0@gmail.com>

Michael,
I did not know that. Great piece of information. 
I ended up using two part epoxy and it?s holding well. I may have over ?thunk?it.
Thanks 

Sent from my iPhone

> On Nov 16, 2022, at 9:34 AM, Michael Winfrey <mwinfrey501 at gmail.com> wrote:
> 
> ?
> No idea how to stick the blade to the wood, but recognized the dark streak in what looks like maple.   I make maple syrup and the tap holes we drill in the tree heal up but leave that streak that goes 2-3 feet above and below the tap hole.
> 
> Not sure if you knew what that was.  I've thought of using maple paneling in my sugar house with those streaks.
> 
>> On Fri, Nov 11, 2022, 12:19 PM Robert Patros <rjpatros05 at gmail.com> wrote:
>> I need to adhere the bandsaw blade to the wood. Any ideas on the best adhesive to use? 
>> 
>> 
>> 
>> Sent from my iPhone_________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221116/f7ccbd34/attachment.html>

From wisawdust at charter.net  Fri Nov 18 08:35:37 2022
From: wisawdust at charter.net (wisawdust at charter.net)
Date: Fri, 18 Nov 2022 14:35:37 +0000
Subject: [crw-talk] Lathe Hauling Help
Message-ID: <9bfda2e901888be3dc39d999a5e2106931385a4b@webmail>

For the upcoming demonstration at Luther HS, I need some help hauling
a couple of lathe stands. I have fixed the Jet lathe stand that had
two bent casters. I also built a new stand for the lathe on the sit
down stand. I will also be hauling my Delta lathe for use at the demo.
Preferably, I need someone with a vehicle that has a 2" receiver hitch
and appropriate electrical connection. I will have the lathes loaded
on my trailer and we can get them to Luther. After the demo, I will
also need to return my lathe and the sit down lathe stand (for
repair). I thought we could get the lathes to Luther sometime before
the demo. Give me a call (608-397-9526) or e-mail me
(wisawdust at charter.net) if yuou can give me a hand. Thanks. 
 Duane
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221118/ca85b50e/attachment.html>

From rjpatros05 at gmail.com  Sat Nov 19 09:27:52 2022
From: rjpatros05 at gmail.com (Robert Patros)
Date: Sat, 19 Nov 2022 09:27:52 -0600
Subject: [crw-talk] Clock project
Message-ID: <708FD44C-8EAF-408E-9DD5-FD0001CE3D6B@gmail.com>

No turning involved, but completed a worthwhile shop project this past week. Clocks for my kids. 
They are 15? in diameter. Two are curly maple and the other is honey locust. The surrounding band is a 1? bandsaw blade throwaway from A-Line welded. I used epoxy ( as suggested by some of you) to hold it together. 
Hope you all have a Happy Thanksgiving! 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_7455.jpg
Type: image/jpeg
Size: 2056717 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221119/593f6324/attachment.jpg>
-------------- next part --------------


Sent from my iPhone

From Ustby at charter.net  Sat Nov 19 09:37:10 2022
From: Ustby at charter.net (Art Ustby)
Date: Sat, 19 Nov 2022 09:37:10 -0600
Subject: [crw-talk] Clock project
In-Reply-To: <708FD44C-8EAF-408E-9DD5-FD0001CE3D6B@gmail.com>
References: <708FD44C-8EAF-408E-9DD5-FD0001CE3D6B@gmail.com>
Message-ID: <C639ED9F-4659-44F2-9EAD-1E7264B0A00E@charter.net>

Look great . Nice clocks.

Sent from my iPhone

> On Nov 19, 2022, at 9:28 AM, Robert Patros <rjpatros05 at gmail.com> wrote:
> 
> ?No turning involved, but completed a worthwhile shop project this past week. Clocks for my kids. 
> They are 15? in diameter. Two are curly maple and the other is honey locust. The surrounding band is a 1? bandsaw blade throwaway from A-Line welded. I used epoxy ( as suggested by some of you) to hold it together. 
> Hope you all have a Happy Thanksgiving! 
> 
> <IMG_7455.jpg>
> 
> 
> Sent from my iPhone_________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/



From julia.bloomer at gmail.com  Sat Nov 19 10:02:31 2022
From: julia.bloomer at gmail.com (Julie Bloomer)
Date: Sat, 19 Nov 2022 10:02:31 -0600
Subject: [crw-talk] Clock project
In-Reply-To: <708FD44C-8EAF-408E-9DD5-FD0001CE3D6B@gmail.com>
References: <708FD44C-8EAF-408E-9DD5-FD0001CE3D6B@gmail.com>
Message-ID: <CAJKRZfgeiE6G1j1gz4zQ10YBM8GsyPvJDoZK5+1a52DLAXa3RA@mail.gmail.com>

Those look awesome!

Julie Bloomer
On Sat, Nov 19, 2022 at 9:28 AM Robert Patros <rjpatros05 at gmail.com> wrote:

> No turning involved, but completed a worthwhile shop project this past
> week. Clocks for my kids.
> They are 15? in diameter. Two are curly maple and the other is honey
> locust. The surrounding band is a 1? bandsaw blade throwaway from A-Line
> welded. I used epoxy ( as suggested by some of you) to hold it together.
> Hope you all have a Happy Thanksgiving!
>
>
>
> Sent from my iPhone_________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221119/93648cea/attachment.html>

From griff at mwt.net  Sat Nov 19 10:12:30 2022
From: griff at mwt.net (John & Donna Griffiths)
Date: Sat, 19 Nov 2022 16:12:30 +0000
Subject: [crw-talk] Clock project
In-Reply-To: <CAJKRZfgeiE6G1j1gz4zQ10YBM8GsyPvJDoZK5+1a52DLAXa3RA@mail.gmail.com>
References: <708FD44C-8EAF-408E-9DD5-FD0001CE3D6B@gmail.com>
	<CAJKRZfgeiE6G1j1gz4zQ10YBM8GsyPvJDoZK5+1a52DLAXa3RA@mail.gmail.com>
Message-ID: <em7dc1e65b-1e02-4fc1-aea1-788e540880e9@e6be539d.com>

Bob, what did you do about the sharp points on the bandsaw blades?  John


------ Original Message ------
>From "Julie Bloomer" <julia.bloomer at gmail.com>
To "Membership mailing list for the AAW Chapter Coulee Region 
Woodturners." <crw-talk at crwoodturner.com>
Date 11/19/2022 10:02:31 AM
Subject Re: [crw-talk] Clock project

>
>Those look awesome!
>
>Julie Bloomer
>On Sat, Nov 19, 2022 at 9:28 AM Robert Patros <rjpatros05 at gmail.com> 
>wrote:
>>No turning involved, but completed a worthwhile shop project this past 
>>week. Clocks for my kids.
>>They are 15? in diameter. Two are curly maple and the other is honey 
>>locust. The surrounding band is a 1? bandsaw blade throwaway from 
>>A-Line welded. I used epoxy ( as suggested by some of you) to hold it 
>>together.
>>Hope you all have a Happy Thanksgiving!
>>
>>
>>
>>Sent from my iPhone_________________________________________
>>Use "Reply to All" or "Reply List" to reach the whole group, "Reply" 
>>goes only to sender.
>>______
>>crw-talk mailing list
>>crw-talk at crwoodturner.com
>>http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>Check the archive to make sure your message was sent: 
>>http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221119/f937ccdc/attachment.html>

From rjpatros05 at gmail.com  Sat Nov 19 10:14:57 2022
From: rjpatros05 at gmail.com (Robert Patros)
Date: Sat, 19 Nov 2022 10:14:57 -0600
Subject: [crw-talk] Clock project
In-Reply-To: <C639ED9F-4659-44F2-9EAD-1E7264B0A00E@charter.net>
References: <C639ED9F-4659-44F2-9EAD-1E7264B0A00E@charter.net>
Message-ID: <3819BAAF-B7F0-4F7D-8E17-4A3A49499C18@gmail.com>

Thank you, Art! I?ll come visit when I?m allowed to drive again. 

Sent from my iPhone

> On Nov 19, 2022, at 9:37 AM, Art Ustby <Ustby at charter.net> wrote:
> 
> ?Look great . Nice clocks.
> 
> Sent from my iPhone
> 
>> On Nov 19, 2022, at 9:28 AM, Robert Patros <rjpatros05 at gmail.com> wrote:
>> 
>> ?No turning involved, but completed a worthwhile shop project this past week. Clocks for my kids. 
>> They are 15? in diameter. Two are curly maple and the other is honey locust. The surrounding band is a 1? bandsaw blade throwaway from A-Line welded. I used epoxy ( as suggested by some of you) to hold it together. 
>> Hope you all have a Happy Thanksgiving! 
>> 
>> <IMG_7455.jpg>
>> 
>> 
>> Sent from my iPhone_________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
> 
> 
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/


From rjpatros05 at gmail.com  Sat Nov 19 10:15:44 2022
From: rjpatros05 at gmail.com (Robert Patros)
Date: Sat, 19 Nov 2022 10:15:44 -0600
Subject: [crw-talk] Clock project
In-Reply-To: <CAJKRZfgeiE6G1j1gz4zQ10YBM8GsyPvJDoZK5+1a52DLAXa3RA@mail.gmail.com>
References: <CAJKRZfgeiE6G1j1gz4zQ10YBM8GsyPvJDoZK5+1a52DLAXa3RA@mail.gmail.com>
Message-ID: <A91FD058-69CD-454C-9FEA-4E0E9615FDA5@gmail.com>

Thanks, Julie. More of a learning experience than I had anticipated, 

Sent from my iPhone

> On Nov 19, 2022, at 10:03 AM, Julie Bloomer <julia.bloomer at gmail.com> wrote:
> 
> ?
> 
> Those look awesome!
> 
> Julie Bloomer
>> On Sat, Nov 19, 2022 at 9:28 AM Robert Patros <rjpatros05 at gmail.com> wrote:
>> No turning involved, but completed a worthwhile shop project this past week. Clocks for my kids. 
>> They are 15? in diameter. Two are curly maple and the other is honey locust. The surrounding band is a 1? bandsaw blade throwaway from A-Line welded. I used epoxy ( as suggested by some of you) to hold it together. 
>> Hope you all have a Happy Thanksgiving! 
>> 
>> 
>> 
>> Sent from my iPhone_________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221119/1bf0f95e/attachment.html>

From rjpatros05 at gmail.com  Sat Nov 19 10:19:06 2022
From: rjpatros05 at gmail.com (Robert Patros)
Date: Sat, 19 Nov 2022 10:19:06 -0600
Subject: [crw-talk] Clock project
In-Reply-To: <em7dc1e65b-1e02-4fc1-aea1-788e540880e9@e6be539d.com>
References: <em7dc1e65b-1e02-4fc1-aea1-788e540880e9@e6be539d.com>
Message-ID: <52214CD1-31FC-4C06-A9B0-B76DCDB3004A@gmail.com>

I left them on, John. As it turns out, it was a small toothed metal blade. I found that out when I tried to drill a hole for a screw. Wouldn?t budge. The teeth are on the outside so won?t hurt the wall. I did put them in a closet so our cat ( Binx) wouldn?t hurt himself. 

Sent from my iPhone

> On Nov 19, 2022, at 10:13 AM, John & Donna Griffiths <griff at mwt.net> wrote:
> 
> ?
> Bob, what did you do about the sharp points on the bandsaw blades?  John
> 
> 
> ------ Original Message ------
> From "Julie Bloomer" <julia.bloomer at gmail.com>
> To "Membership mailing list for the AAW Chapter Coulee Region Woodturners." <crw-talk at crwoodturner.com>
> Date 11/19/2022 10:02:31 AM
> Subject Re: [crw-talk] Clock project
> 
>> 
>> Those look awesome!
>> 
>> Julie Bloomer
>>> On Sat, Nov 19, 2022 at 9:28 AM Robert Patros <rjpatros05 at gmail.com> wrote:
>>> No turning involved, but completed a worthwhile shop project this past week. Clocks for my kids. 
>>> They are 15? in diameter. Two are curly maple and the other is honey locust. The surrounding band is a 1? bandsaw blade throwaway from A-Line welded. I used epoxy ( as suggested by some of you) to hold it together. 
>>> Hope you all have a Happy Thanksgiving! 
>>> 
>>> 
>>> 
>>> Sent from my iPhone_________________________________________
>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>>> ______
>>> crw-talk mailing list
>>> crw-talk at crwoodturner.com
>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221119/c4f19395/attachment.html>

From aamethesta at aol.com  Sat Nov 19 12:43:41 2022
From: aamethesta at aol.com (Pam Day)
Date: Sat, 19 Nov 2022 18:43:41 +0000 (UTC)
Subject: [crw-talk] How to see the clocks?
References: <1098362692.617611.1668883421964.ref@mail.yahoo.com>
Message-ID: <1098362692.617611.1668883421964@mail.yahoo.com>

How do I see the clocks on these pages?

Sent from the all new AOL app for Android
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221119/bbc7a9b8/attachment.html>

From jkphillips006 at gmail.com  Sat Nov 19 14:07:57 2022
From: jkphillips006 at gmail.com (John Phillips)
Date: Sat, 19 Nov 2022 14:07:57 -0600
Subject: [crw-talk] Clock project
In-Reply-To: <em7dc1e65b-1e02-4fc1-aea1-788e540880e9@e6be539d.com>
References: <em7dc1e65b-1e02-4fc1-aea1-788e540880e9@e6be539d.com>
Message-ID: <3FF0941A-7568-49DB-B44A-98C780D53494@gmail.com>

Very nice!

Sent from my iPhone

> On Nov 19, 2022, at 10:13 AM, John & Donna Griffiths <griff at mwt.net> wrote:
> 
> ?
> Bob, what did you do about the sharp points on the bandsaw blades?  John
> 
> 
> ------ Original Message ------
> From "Julie Bloomer" <julia.bloomer at gmail.com>
> To "Membership mailing list for the AAW Chapter Coulee Region Woodturners." <crw-talk at crwoodturner.com>
> Date 11/19/2022 10:02:31 AM
> Subject Re: [crw-talk] Clock project
> 
>> 
>> Those look awesome!
>> 
>> Julie Bloomer
>>> On Sat, Nov 19, 2022 at 9:28 AM Robert Patros <rjpatros05 at gmail.com> wrote:
>>> No turning involved, but completed a worthwhile shop project this past week. Clocks for my kids. 
>>> They are 15? in diameter. Two are curly maple and the other is honey locust. The surrounding band is a 1? bandsaw blade throwaway from A-Line welded. I used epoxy ( as suggested by some of you) to hold it together. 
>>> Hope you all have a Happy Thanksgiving! 
>>> 
>>> 
>>> 
>>> Sent from my iPhone_________________________________________
>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>>> ______
>>> crw-talk mailing list
>>> crw-talk at crwoodturner.com
>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221119/dfc63229/attachment.html>

From marine9096 at gmail.com  Sat Nov 19 14:52:35 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Sat, 19 Nov 2022 14:52:35 -0600
Subject: [crw-talk] Luther Demo
Message-ID: <CAGK6+hA71sKKNnMAAq+d8cyt_vkHww8=yA+R+WWOPhb6beuXSQ@mail.gmail.com>

Good Afternoon, hope everyone is staying warm.
Just a reminder that we are holding a skills demo on the 22nd at Luther.
Arrival at 1200 to set up and chips should be flying by 1300.
If you can demo or help set up that would be appreciated. Otherwise if you
would drop an item off for a display that would be appreciated as well.



In Service
-- 
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221119/73ed3afb/attachment.html>

From rjpatros05 at gmail.com  Sat Nov 19 14:55:45 2022
From: rjpatros05 at gmail.com (Robert Patros)
Date: Sat, 19 Nov 2022 14:55:45 -0600
Subject: [crw-talk] Clock project
In-Reply-To: <3FF0941A-7568-49DB-B44A-98C780D53494@gmail.com>
References: <3FF0941A-7568-49DB-B44A-98C780D53494@gmail.com>
Message-ID: <03B9411E-179A-4C6F-B77A-09F31AE89EA7@gmail.com>

Thank you, John! Good to be in the shop again. 

Sent from my iPhone

> On Nov 19, 2022, at 2:08 PM, John Phillips <jkphillips006 at gmail.com> wrote:
> 
> ?Very nice!
> 
> Sent from my iPhone
> 
>>> On Nov 19, 2022, at 10:13 AM, John & Donna Griffiths <griff at mwt.net> wrote:
>>> 
>> ?
>> Bob, what did you do about the sharp points on the bandsaw blades?  John
>> 
>> 
>> ------ Original Message ------
>> From "Julie Bloomer" <julia.bloomer at gmail.com>
>> To "Membership mailing list for the AAW Chapter Coulee Region Woodturners." <crw-talk at crwoodturner.com>
>> Date 11/19/2022 10:02:31 AM
>> Subject Re: [crw-talk] Clock project
>> 
>>> 
>>> Those look awesome!
>>> 
>>> Julie Bloomer
>>>> On Sat, Nov 19, 2022 at 9:28 AM Robert Patros <rjpatros05 at gmail.com> wrote:
>>>> No turning involved, but completed a worthwhile shop project this past week. Clocks for my kids. 
>>>> They are 15? in diameter. Two are curly maple and the other is honey locust. The surrounding band is a 1? bandsaw blade throwaway from A-Line welded. I used epoxy ( as suggested by some of you) to hold it together. 
>>>> Hope you all have a Happy Thanksgiving! 
>>>> 
>>>> 
>>>> 
>>>> Sent from my iPhone_________________________________________
>>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>>>> ______
>>>> crw-talk mailing list
>>>> crw-talk at crwoodturner.com
>>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221119/2362cec3/attachment.html>

From aaronagesicki at gmail.com  Sat Nov 19 15:08:23 2022
From: aaronagesicki at gmail.com (Aaron Gesicki)
Date: Sat, 19 Nov 2022 15:08:23 -0600
Subject: [crw-talk] Luther Demo
In-Reply-To: <CAGK6+hA71sKKNnMAAq+d8cyt_vkHww8=yA+R+WWOPhb6beuXSQ@mail.gmail.com>
References: <CAGK6+hA71sKKNnMAAq+d8cyt_vkHww8=yA+R+WWOPhb6beuXSQ@mail.gmail.com>
Message-ID: <!&!AAAAAAAAAAAuAAAAAAAAABJ70/9ViIVIha+/5AXJOVABAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAAALFngnQB6oToh1ZEc1auY0AQAAAAA=@gmail.com>

I?ll be there. 
 
 
Aaron Gesicki
 
 
 
From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of James Bloomer
Sent: Saturday, November 19, 2022 2:53 PM
To: CRW talk <crw-talk at crwoodturner.com>
Subject: [crw-talk] Luther Demo
 
Good Afternoon, hope everyone is staying warm. 
Just a reminder that we are holding a skills demo on the 22nd at Luther.
Arrival at 1200 to set up and chips should be flying by 1300. 
If you can demo or help set up that would be appreciated. Otherwise if you would drop an item off for a display that would be appreciated as well. 
 
 


In Service
-- 
James A. Bloomer
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221119/81938d62/attachment.html>

From wisawdust at charter.net  Sat Nov 19 15:17:18 2022
From: wisawdust at charter.net (wisawdust)
Date: Sat, 19 Nov 2022 15:17:18 -0600
Subject: [crw-talk] Luther Demo
In-Reply-To: <!&!AAAAAAAAAAAuAAAAAAAAABJ70/9ViIVIha+/5AXJOVABAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAAALFngnQB6oToh1ZEc1auY0AQAAAAA=@gmail.com>
Message-ID: <mailman.24.1668892651.998929.crw-talk_crwoodturner.com@crwoodturner.com>

Got yaSent from my Galaxy
-------- Original message --------From: Aaron Gesicki <aaronagesicki at gmail.com> Date: 11/19/22  3:08 PM  (GMT-06:00) To: "'Membership mailing list for the AAW Chapter Coulee Region	Woodturners.'" <crw-talk at crwoodturner.com> Subject: Re: [crw-talk] Luther Demo I?ll be there. ??Aaron Gesicki???From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of James BloomerSent: Saturday, November 19, 2022 2:53 PMTo: CRW talk <crw-talk at crwoodturner.com>Subject: [crw-talk] Luther Demo?Good Afternoon, hope everyone is staying warm.?Just a reminder that we are holding a skills demo on the 22nd at Luther.Arrival at 1200 to set up and chips should be flying by 1300.?If you can demo or help set up that would be appreciated. Otherwise if you would drop an item off for a display that would be appreciated as well.???In Service-- James A. Bloomer?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221119/f07ff331/attachment.html>

From marine9096 at gmail.com  Thu Nov 24 10:11:17 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Thu, 24 Nov 2022 10:11:17 -0600
Subject: [crw-talk] Fraud Warning
Message-ID: <CAGK6+hB-0QryoeeRWbn7w83BS5P4cL-HXa3H-1W6WysvE9Ef2A@mail.gmail.com>

I received it as well. Reported as spam

Jim Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221124/bb3a2be1/attachment.html>

From wisawdust at charter.net  Mon Nov 28 17:55:54 2022
From: wisawdust at charter.net (wisawdust)
Date: Mon, 28 Nov 2022 17:55:54 -0600
Subject: [crw-talk] Luther Skill demo
In-Reply-To: <CAGK6+hA6kCcbH-4b2dLxbi7df7kbYvmH=wpCH74Qrzzhn2Un6w@mail.gmail.com>
Message-ID: <mailman.25.1669679772.998929.crw-talk_crwoodturner.com@crwoodturner.com>

Jim, due to previous commitments I will NOT be able to attend Norse Skedalen demo on Saturday.DuandSent from my Galaxy
-------- Original message --------From: James Bloomer <marine9096 at gmail.com> Date: 11/3/22  3:12 PM  (GMT-06:00) To: CRW talk <crw-talk at crwoodturner.com> Subject: [crw-talk] Luther Skill demo Dan at Luther would like to have another Skill Demo and hands on pen turning for his classes again.?The Skills Demo is short notice, the 15th of this month. The pen turning would be in December.?It would be like the last.?Arrive and set up, 12-1demo from 1-3 or so.?The more demonstrators the better. Different aspects/materials for turning.?If you can't demo then display pieces would also be appreciated.15th is a Tuesday.??I know Duane and I are interested. I would like to have a set idea by Tuesday next?week. So we can get a gauge on how many demonstrators and make arrangements to pick up display pieces.In ServiceJim Bloomer-- James A. Bloomer
?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221128/5f1be689/attachment.html>

From andrewpingree at gmail.com  Mon Nov 28 19:00:56 2022
From: andrewpingree at gmail.com (Andrew)
Date: Mon, 28 Nov 2022 19:00:56 -0600
Subject: [crw-talk] Luther Skill demo
In-Reply-To: <63854ab0.c80a0220.6e408.9771SMTPIN_ADDED_MISSING@mx.google.com>
References: <CAGK6+hA6kCcbH-4b2dLxbi7df7kbYvmH=wpCH74Qrzzhn2Un6w@mail.gmail.com>
	<63854ab0.c80a0220.6e408.9771SMTPIN_ADDED_MISSING@mx.google.com>
Message-ID: <CANRBiF6=witkBKDG_ZHVehCFz+KVN6W_YORDmOnJG8P-6HR_ww@mail.gmail.com>

I signed up for Norskedalen, but I also won't be able to attend. I'll be at
my son's wrestling tournament all day.

Andrew

On Mon, Nov 28, 2022, 5:56 PM wisawdust <wisawdust at charter.net> wrote:

> Jim, due to previous commitments I will NOT be able to attend Norse
> Skedalen demo on Saturday.
>
> Duand
>
>
>
> Sent from my Galaxy
>
>
> -------- Original message --------
> From: James Bloomer <marine9096 at gmail.com>
> Date: 11/3/22 3:12 PM (GMT-06:00)
> To: CRW talk <crw-talk at crwoodturner.com>
> Subject: [crw-talk] Luther Skill demo
>
> Dan at Luther would like to have another Skill Demo and hands on pen
> turning for his classes again.
> The Skills Demo is short notice, the 15th of this month. The pen turning
> would be in December.
> It would be like the last.
> Arrive and set up, 12-1
> demo from 1-3 or so.
> The more demonstrators the better. Different aspects/materials for
> turning.
> If you can't demo then display pieces would also be appreciated.
> 15th is a Tuesday.
> I know Duane and I are interested. I would like to have a set idea by
> Tuesday next week. So we can get a gauge on how many demonstrators and make
> arrangements to pick up display pieces.
>
>
> In Service
> Jim Bloomer
> --
> James A. Bloomer
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221128/263e9750/attachment.html>

From mogoldfish at yahoo.com  Mon Nov 28 20:28:03 2022
From: mogoldfish at yahoo.com (Kristine Clough)
Date: Tue, 29 Nov 2022 02:28:03 +0000 (UTC)
Subject: [crw-talk] Fw: Re[2]: Norskedalen
In-Reply-To: <em7b5cd2fe-9771-435d-803c-432b2fa7b23a@d644813f.com>
References: <em7b5cd2fe-9771-435d-803c-432b2fa7b23a@d644813f.com>
Message-ID: <1809462515.4745229.1669688883104@mail.yahoo.com>

Hi everyone,
I have the following people signed up for Norskedalen this Saturday.?
Jim HobmanDuane Hill - canceledAndrew Pingree - canceled?
Is anyone else able to help?
Kris

Sent from Yahoo Mail on Android 
 
  On Tue, Nov 8, 2022 at 2:45 PM, John & Donna Griffiths<griff at mwt.net> wrote:   <!--#yiv8020951045 #yiv8020951045x54066b089819455 blockquote.yiv8020951045cite2{margin-left:5px;margin-right:0px;padding-left:10px;padding-right:0px;border-left:1px solid rgb(204, 204, 204);margin-top:3px;padding-top:0px;}#yiv8020951045 #yiv8020951045x54066b089819455{font-family:"Segoe UI";font-size:12pt;}--><!--#yiv8020951045 blockquote.yiv8020951045cite {margin-left:5px;margin-right:0px;padding-left:10px;padding-right:0px;border-left:1px solid #cccccc;}#yiv8020951045 blockquote.yiv8020951045cite2 {margin-left:5px;margin-right:0px;padding-left:10px;padding-right:0px;border-left:1px solid #cccccc;margin-top:3px;padding-top:0px;}#yiv8020951045 a img {border:0px;}-->


------ Forwarded Message ------Members, Hope the wind is not getting to you all.? I just heard from Julie Schroeder from Norskedalen about their Christmas fair on December 3.? Her reply about there time, food and location is below.??
Sounds like if your blood sugar and cholesterol are a bit low, you can really score here, LOL.? Check just below, John

Hi, John,The hours are from 9:00 to 3:00 on December 3rd. They may stretch an hour on either side but that?s what we?re planning on now. Yes, there will be lots of Norwegian food and baked goods, meatballs, mashed potatoes, lefse, sandbakels, rosettes, etc. All the treats that are made with lots of sugar and butter ?.
The visitor?s center will be filled with lots of different happenings. The homestead will be decorated with Christmas, the blacksmith will be in his shop, and a few others. We are thinking that the woodworkers would be in the shelter with the fire going and the propane heaters heating. There are wooden doors that will be closed on one side, and plastic screens on the side facing the meadow. It?ll be a great location for people to stop when walking between the visitor?s shelter and the homestead. Clean up will be really easy, too. Would your group be okay being in the shelter?
Julie


On Nov 7, 2022, at 1:38 PM, John & Donna Griffiths <griff at mwt.net> wrote:
Hi Julie, what are the hours for the Christmas celebration?? Will food be available?
We meet this Saturday and I plan to talk up the event.? John


_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221129/445c02dc/attachment.html>

From marine9096 at gmail.com  Tue Nov 29 14:22:17 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Tue, 29 Nov 2022 14:22:17 -0600
Subject: [crw-talk] Norskedalen
Message-ID: <CAGK6+hDooKVsM5d=2HBr9A_BWB1DBRR4qGeEG7cqE1+ZkrP=KQ@mail.gmail.com>

Seeing the email traffic, wanted to see if we currently have any members
that were planning on going?
John G. What is the timeline for the event?
Would definitely encourage that even if you don't want to turn, can at
least come and chat about our craft. The demo is cool but just sharing your
passion helps.
Please let me know by the end of day or first thing in the morning.

In Service



-- 
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221129/da8188c0/attachment.html>

From griff at mwt.net  Tue Nov 29 14:30:38 2022
From: griff at mwt.net (John & Donna Griffiths)
Date: Tue, 29 Nov 2022 20:30:38 +0000
Subject: [crw-talk] Norskedalen
In-Reply-To: <CAGK6+hDooKVsM5d=2HBr9A_BWB1DBRR4qGeEG7cqE1+ZkrP=KQ@mail.gmail.com>
References: <CAGK6+hDooKVsM5d=2HBr9A_BWB1DBRR4qGeEG7cqE1+ZkrP=KQ@mail.gmail.com>
Message-ID: <em6ac5a65a-cb46-4615-86ee-b8e30f63f1cb@27991d02.com>


Kris just posted a list and only two are are attending so far.  Lets see 
if we get more and if not maybe we will have to cancel.  I can't make 
it.  John

------ Original Message ------
>From "James Bloomer" <marine9096 at gmail.com>
To "CRW talk" <crw-talk at crwoodturner.com>
Date 11/29/2022 2:22:17 PM
Subject [crw-talk] Norskedalen

>Seeing the email traffic, wanted to see if we currently have any 
>members that were planning on going?
>John G. What is the timeline for the event?
>Would definitely encourage that even if you don't want to turn, can at 
>least come and chat about our craft. The demo is cool but just sharing 
>your passion helps.
>Please let me know by the end of day or first thing in the morning.
>
>In Service
>
>
>
>--
>James A. Bloomer
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221129/ef619312/attachment.html>

From raaschb at charter.net  Tue Nov 29 16:50:15 2022
From: raaschb at charter.net (raaschb at charter.net)
Date: Tue, 29 Nov 2022 16:50:15 -0600
Subject: [crw-talk] Norskedalen
In-Reply-To: <CAGK6+hDooKVsM5d=2HBr9A_BWB1DBRR4qGeEG7cqE1+ZkrP=KQ@mail.gmail.com>
References: <CAGK6+hDooKVsM5d=2HBr9A_BWB1DBRR4qGeEG7cqE1+ZkrP=KQ@mail.gmail.com>
Message-ID: <!&!AAAAAAAAAAAuAAAAAAAAAF3gfGrSs3NKgRZEH6ulIBABAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAAC08rb81cLgSp/qn95/AYGDAQAAAAA=@charter.net>

Jim, I can not be there. Am ill.   Bob R

 

From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of James Bloomer
Sent: Tuesday, November 29, 2022 2:22 PM
To: CRW talk <crw-talk at crwoodturner.com>
Subject: [crw-talk] Norskedalen

 

Seeing the email traffic, wanted to see if we currently have any members that were planning on going?

John G. What is the timeline for the event?

Would definitely encourage that even if you don't want to turn, can at least come and chat about our craft. The demo is cool but just sharing your passion helps. 

Please let me know by the end of day or first thing in the morning.

 

In Service

 




 

-- 

James A. Bloomer

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221129/12e5b7d7/attachment.html>

From wisawdust at charter.net  Wed Nov 30 10:18:11 2022
From: wisawdust at charter.net (wisawdust at charter.net)
Date: Wed, 30 Nov 2022 16:18:11 +0000
Subject: [crw-talk] Vicmarc Extended Jaws For Sale
Message-ID: <97227541775a50aa036984b8d0bf3acc3bb75295@webmail>

I was going thru my shop yesterday and came across three set of
Vicmarc extended jaws to fit a VM-100 chuck. I think they will also
fit of Nova Chuck. These were left over from classes. I would like to
sell them for $25 each. Drop me an e-mail (wisawdust at charter.net),
text or call me at 608-397-9526 if you are interested.
Duane
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221130/bdd17c46/attachment.html>

From marine9096 at gmail.com  Wed Nov 30 18:20:25 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Wed, 30 Nov 2022 18:20:25 -0600
Subject: [crw-talk] norskedalen demo
Message-ID: <CAGK6+hAJoHBeSy4shU__Jy=RkjGJk7xSt=1Dg02cMdUen-UXog@mail.gmail.com>

One last check, I would be able to Demo. Duane would be able to at least
talk 10-12... would like a couple more to talk/sell/demo.

Would need an answer this evening to decide if we can still support the
demo.

Jim Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20221130/f53c08b6/attachment.html>