[crw-talk] Hollowing tool

[Ken Grunke]

Same issue with me. I see other's replies but not Kris's original 
message. I do see it in the archives. I'm inclined to agree with Aaron 
about the cloud, and to say it's beyond my realm of control.

Ken

On 6/12/22 07:30, Robert Patros wrote:
> Kris,
> Just an fyi. I see you sent your note to the club yesterday but I did 
> not receive it. This has happened in the past and I’m wondering if 
> others in the club also didn’t receive it. A question for Ken, I assume?
> Bob
>
> Sent from my iPhone
>
>> On Jun 12, 2022, at 6:37 AM, Egan, Richard <EganR at westerntc.edu> wrote:
>>
>> 
>> Kris you will want to adjust cutter height to be tip edge of cutter 
>> just at center or slightly above.
>>
>> Looks to me like you should back the cutter off so much less is 
>> hanging out or maybe cut that one in half and make two cutters. You 
>> can break by putting in a vise and scoring with Drexel cutting wheel 
>> then snap off.
>>
>>
>>
>> Sent from my Verizon, Samsung Galaxy smartphone
>>
>>
>>
>> -------- Original message --------
>> From: Kristine Clough <mogoldfish at yahoo.com>
>> Date: 6/11/22 8:16 PM (GMT-06:00)
>> To: Crw-talk <crw-talk at crwoodturner.com>
>> Subject: [crw-talk] Hollowing tool
>>
>> CAUTION: This email originated from outside of Western Technical 
>> College. Do not click links or open attachments unless you recognize 
>> the sender and know the content is safe.
>>
>> 20220611_200514.jpg
>> 20220611_200426.jpg
>>
>> I had purchased a homemade hollowing tool from a club member several 
>> years ago and am just using it now.  The bit sits with the top about 
>> 1/4" above center.  I'm not sure if I set it up correctly.   What 
>> should I do?
>>
>> Kris
>>
>> Sent from Yahoo Mail on Android 
>> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" 
>> goes only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent: 
>> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220612/24a1dcc2/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20220611_200514.jpg
Type: image/jpeg
Size: 4272316 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220612/24a1dcc2/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20220611_200426.jpg
Type: image/jpeg
Size: 3369838 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220612/24a1dcc2/attachment-0001.jpg>