[crw-talk] Hollowing tool

[Aaron Gesicki]

All CRW-talk messages go into my Spam folder. I have to check it every day. 
 
I use Outlook for email. Changing the settings doesn’t fix the problem. I think it happens in the Google Gmail cloud. 
 
 
Aaron Gesicki
 
 
 
From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Robert Patros
Sent: Sunday, June 12, 2022 7:30 AM
To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. <crw-talk at crwoodturner.com>
Subject: Re: [crw-talk] Hollowing tool
 
Kris,
Just an fyi. I see you sent your note to the club yesterday but I did not receive it. This has happened in the past and I’m wondering if others in the club also didn’t receive it. A question for Ken, I assume? 
Bob
Sent from my iPhone



On Jun 12, 2022, at 6:37 AM, Egan, Richard <EganR at westerntc.edu <mailto:EganR at westerntc.edu> > wrote:
 
Kris you will want to adjust cutter height to be tip edge of cutter just at center or slightly above.
 
Looks to me like you should back the cutter off so much less is hanging out or maybe cut that one in half and make two cutters. You can break by putting in a vise and scoring with Drexel cutting wheel then snap off.
 
 
 
Sent from my Verizon, Samsung Galaxy smartphone
 
 
 
-------- Original message --------
From: Kristine Clough <mogoldfish at yahoo.com <mailto:mogoldfish at yahoo.com> > 
Date: 6/11/22 8:16 PM (GMT-06:00) 
To: Crw-talk <crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> > 
Subject: [crw-talk] Hollowing tool 
 
CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe.
 



I had purchased a homemade hollowing tool from a club member several years ago and am just using it now.  The bit sits with the top about 1/4" above center.  I'm not sure if I set it up correctly.   What should I do? 
 
Kris
Sent from Yahoo Mail on Android <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature> 
_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> 
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220612/2976b1e0/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 4272316 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220612/2976b1e0/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 3369838 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220612/2976b1e0/attachment-0001.jpg>