[crw-talk] Hollowing tool

[Egan, Richard]

Kris you will want to adjust cutter height to be tip edge of cutter just at center or slightly above.

Looks to me like you should back the cutter off so much less is hanging out or maybe cut that one in half and make two cutters. You can break by putting in a vise and scoring with Drexel cutting wheel then snap off.



Sent from my Verizon, Samsung Galaxy smartphone



-------- Original message --------
From: Kristine Clough <mogoldfish at yahoo.com>
Date: 6/11/22 8:16 PM (GMT-06:00)
To: Crw-talk <crw-talk at crwoodturner.com>
Subject: [crw-talk] Hollowing tool

CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe.

[cid:28245f26-6bbb-4228-abd5-b333275727fa]
[cid:5737dc47-7bf0-4066-a60c-1e91a46fde56]

I had purchased a homemade hollowing tool from a club member several years ago and am just using it now.  The bit sits with the top about 1/4" above center.  I'm not sure if I set it up correctly.   What should I do?

Kris

Sent from Yahoo Mail on Android<https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220612/6fa96943/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20220611_200514.jpg
Type: image/jpeg
Size: 4272316 bytes
Desc: 20220611_200514.jpg
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220612/6fa96943/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20220611_200426.jpg
Type: image/jpeg
Size: 3369838 bytes
Desc: 20220611_200426.jpg
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220612/6fa96943/attachment-0001.jpg>