[crw-talk] My latest creation

[Mwt]

Hello folks, I just completed a yarn bowl from white ash, hollowing it out from end-grain with my Jamison system using a shop built cutter with an Easy Wood Tool  cutter. (Even though I am enough of a snob to prefer cutting wood rather then scraping it. But my machining skills are not good enough to build one with a Hunter cutter.). The log laid on the ground for however long causing the blackish decay spot which I left as an accent rather then turning away.
Josh, you may post this.
John 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_5333.jpg
Type: image/jpeg
Size: 730618 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220202/84ef55c1/attachment.jpg>
-------------- next part --------------



-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_5329.jpg
Type: image/jpeg
Size: 1067868 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220202/84ef55c1/attachment-0001.jpg>
-------------- next part --------------


Sent from my iPhone