From aaronagesicki at gmail.com Tue Feb 1 16:06:27 2022 From: aaronagesicki at gmail.com (aaronagesicki at gmail.com) Date: Tue, 1 Feb 2022 16:06:27 -0600 Subject: [crw-talk] Wig Stands In-Reply-To: <61f8a1df.1c69fb81.719bc.749dSMTPIN_ADDED_MISSING@mx.google.com> References: <61f8a1df.1c69fb81.719bc.749dSMTPIN_ADDED_MISSING@mx.google.com> Message-ID: <2a8101d817b7$f5fe7e20$e1fb7a60$@gmail.com> There?ll be more info about this in the newsletter. Aaron Gesicki From: crw-talk On Behalf Of Bob R Sent: Monday, January 31, 2022 8:57 PM To: CRW talk Subject: [crw-talk] Wig Stands Hi all, I dropped off another wig stand today at the Gundersen Cancer Center. Thank you John Griffiths. Taylor's comment was, "they're a hit". I know everyone is busy; please continue making them as you are able. It's a noble cause. As you complete a stand, I encourage you to take a photo & send to crw talk. I hope to make a couple soon. Thank you, Bob Raasch, Sent from my Phone -------------- next part -------------- An HTML attachment was scrubbed... URL: From griff at mwt.net Wed Feb 2 12:34:30 2022 From: griff at mwt.net (Mwt) Date: Wed, 2 Feb 2022 12:34:30 -0600 Subject: [crw-talk] My latest creation Message-ID: <876BED13-88F1-43C1-956A-7ECEFD7059D8@mwt.net> Hello folks, I just completed a yarn bowl from white ash, hollowing it out from end-grain with my Jamison system using a shop built cutter with an Easy Wood Tool cutter. (Even though I am enough of a snob to prefer cutting wood rather then scraping it. But my machining skills are not good enough to build one with a Hunter cutter.). The log laid on the ground for however long causing the blackish decay spot which I left as an accent rather then turning away. Josh, you may post this. John -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_5333.jpg Type: image/jpeg Size: 730618 bytes Desc: not available URL: -------------- next part -------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_5329.jpg Type: image/jpeg Size: 1067868 bytes Desc: not available URL: -------------- next part -------------- Sent from my iPhone From griff at mwt.net Wed Feb 2 12:45:04 2022 From: griff at mwt.net (Mwt) Date: Wed, 2 Feb 2022 12:45:04 -0600 Subject: [crw-talk] Birch bowl Message-ID: <707DBCA3-096F-40BE-9752-A8A8CF9E854C@mwt.net> Here are some shots of a bowl made from log the shop teacher at Luther donated to the club. Note the figure in the squarish end. Must have been a fork near it, the other half of the log does not have figure. James, could you send it on to the teacher? Josh, you can post this. -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_5304.jpg Type: image/jpeg Size: 963727 bytes Desc: not available URL: -------------- next part -------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_5306.jpg Type: image/jpeg Size: 821344 bytes Desc: not available URL: -------------- next part -------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_5309.jpg Type: image/jpeg Size: 550631 bytes Desc: not available URL: -------------- next part -------------- Sent from my iPhone From aaronagesicki at gmail.com Wed Feb 2 16:48:29 2022 From: aaronagesicki at gmail.com (aaronagesicki at gmail.com) Date: Wed, 2 Feb 2022 16:48:29 -0600 Subject: [crw-talk] My latest creation In-Reply-To: <876BED13-88F1-43C1-956A-7ECEFD7059D8@mwt.net> References: <876BED13-88F1-43C1-956A-7ECEFD7059D8@mwt.net> Message-ID: <007901d81887$008f1be0$01ad53a0$@gmail.com> Nice. Aaron Gesicki -----Original Message----- From: crw-talk On Behalf Of Mwt Sent: Wednesday, February 2, 2022 12:35 PM To: crw-talk at crwoodturner.com Subject: [crw-talk] My latest creation Hello folks, I just completed a yarn bowl from white ash, hollowing it out from end-grain with my Jamison system using a shop built cutter with an Easy Wood Tool cutter. (Even though I am enough of a snob to prefer cutting wood rather then scraping it. But my machining skills are not good enough to build one with a Hunter cutter.). The log laid on the ground for however long causing the blackish decay spot which I left as an accent rather then turning away. Josh, you may post this. John From aaronagesicki at gmail.com Wed Feb 2 16:50:58 2022 From: aaronagesicki at gmail.com (aaronagesicki at gmail.com) Date: Wed, 2 Feb 2022 16:50:58 -0600 Subject: [crw-talk] Birch bowl In-Reply-To: <707DBCA3-096F-40BE-9752-A8A8CF9E854C@mwt.net> References: <707DBCA3-096F-40BE-9752-A8A8CF9E854C@mwt.net> Message-ID: <009201d81887$597ac7e0$0c7057a0$@gmail.com> I like turned objects, especially natural edge stuff. But...Unfortunately, now we need to work on the photography. Aaron Gesicki -----Original Message----- From: crw-talk On Behalf Of Mwt Sent: Wednesday, February 2, 2022 12:45 PM To: crw-talk at crwoodturner.com Subject: [crw-talk] Birch bowl Here are some shots of a bowl made from log the shop teacher at Luther donated to the club. Note the figure in the squarish end. Must have been a fork near it, the other half of the log does not have figure. James, could you send it on to the teacher? Josh, you can post this. From raaschb at charter.net Wed Feb 2 16:59:23 2022 From: raaschb at charter.net (Bob R) Date: Wed, 02 Feb 2022 16:59:23 -0600 Subject: [crw-talk] My latest creation Message-ID: John, that's a nice piece,? I like the grain & color. Bob R, Sent from my Phone On Feb 2, 2022 12:34 PM, Mwt wrote: > > Hello folks, I just completed a yarn bowl from white ash, hollowing it out from end-grain with my Jamison system using a shop built cutter with an Easy Wood Tool? cutter. (Even though I am enough of a snob to prefer cutting wood rather then scraping it. But my machining skills are not good enough to build one with a Hunter cutter.). The log laid on the ground for however long causing the blackish decay spot which I left as an accent rather then turning away. > Josh, you may post this. > John > > > > > > Sent from my iPhone > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ From raaschb at charter.net Wed Feb 2 17:09:47 2022 From: raaschb at charter.net (Bob R) Date: Wed, 02 Feb 2022 17:09:47 -0600 Subject: [crw-talk] Birch bowl Message-ID: Oh, nice work on this natural edge piece, John. Bob R, Sent from my Phone On Feb 2, 2022 12:45 PM, Mwt wrote: > > Here are some shots of a bowl made from log the shop teacher at Luther donated to the club. Note the figure in the squarish end. Must have been a fork near it, the other half of the log does not have figure. > James, could you send it on to the teacher? > Josh, you can post this. > > > > > > > > Sent from my iPhone > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ From rjpatros05 at gmail.com Wed Feb 2 17:11:50 2022 From: rjpatros05 at gmail.com (Robert Patros) Date: Wed, 2 Feb 2022 17:11:50 -0600 Subject: [crw-talk] My latest creation In-Reply-To: <876BED13-88F1-43C1-956A-7ECEFD7059D8@mwt.net> References: <876BED13-88F1-43C1-956A-7ECEFD7059D8@mwt.net> Message-ID: <2D187BF5-5EC9-4103-94A6-6DB05E4BD719@gmail.com> Very pleasing shape. Nice work!! Sent from my iPhone > On Feb 2, 2022, at 12:37 PM, Mwt wrote: > > ?Hello folks, I just completed a yarn bowl from white ash, hollowing it out from end-grain with my Jamison system using a shop built cutter with an Easy Wood Tool cutter. (Even though I am enough of a snob to prefer cutting wood rather then scraping it. But my machining skills are not good enough to build one with a Hunter cutter.). The log laid on the ground for however long causing the blackish decay spot which I left as an accent rather then turning away. > Josh, you may post this. > John > -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_5333.jpg Type: image/jpeg Size: 730618 bytes Desc: not available URL: -------------- next part -------------- > > > -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_5329.jpg Type: image/jpeg Size: 1067868 bytes Desc: not available URL: -------------- next part -------------- > > > Sent from my iPhone_________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ From jdcrow1956 at yahoo.com Wed Feb 2 22:52:29 2022 From: jdcrow1956 at yahoo.com (John Fisher) Date: Thu, 3 Feb 2022 04:52:29 +0000 (UTC) Subject: [crw-talk] My latest creation In-Reply-To: <876BED13-88F1-43C1-956A-7ECEFD7059D8@mwt.net> References: <876BED13-88F1-43C1-956A-7ECEFD7059D8@mwt.net> Message-ID: <1143702430.5544358.1643863949371@mail.yahoo.com> Very nice.? I really love the wood grain. On Wednesday, February 2, 2022, 12:35:19 PM CST, Mwt wrote: Hello folks, I just completed a yarn bowl from white ash, hollowing it out from end-grain with my Jamison system using a shop built cutter with an Easy Wood Tool? cutter. (Even though I am enough of a snob to prefer cutting wood rather then scraping it. But my machining skills are not good enough to build one with a Hunter cutter.). The log laid on the ground for however long causing the blackish decay spot which I left as an accent rather then turning away. Josh, you may post this. John Sent from my iPhone_________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From griff at mwt.net Thu Feb 3 10:50:11 2022 From: griff at mwt.net (John & Donna Griffiths) Date: Thu, 03 Feb 2022 16:50:11 +0000 Subject: [crw-talk] Birch bowl In-Reply-To: <009201d81887$597ac7e0$0c7057a0$@gmail.com> References: <707DBCA3-096F-40BE-9752-A8A8CF9E854C@mwt.net> <009201d81887$597ac7e0$0c7057a0$@gmail.com> Message-ID: Hi Aaron, Working for natural light from a south facing window with a smart phone does present some photographic limitations. And I am not an accomplished photographer. j ------ Original Message ------ From: aaronagesicki at gmail.com To: "'Membership mailing list for the AAW Chapter Coulee Region Woodturners.'" Sent: 2/2/2022 4:50:58 PM Subject: Re: [crw-talk] Birch bowl >I like turned objects, especially natural >edge stuff. But...Unfortunately, now we need >to work on the photography. > > >Aaron Gesicki > > > >-----Original Message----- >From: crw-talk > On >Behalf Of Mwt >Sent: Wednesday, February 2, 2022 12:45 PM >To: crw-talk at crwoodturner.com >Subject: [crw-talk] Birch bowl > >Here are some shots of a bowl made from log >the shop teacher at Luther donated to the >club. Note the figure in the squarish end. >Must have been a fork near it, the other >half of the log does not have figure. >James, could you send it on to the teacher? >Josh, you can post this. > > > >_________________________________________ >Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >______ >crw-talk mailing list >crw-talk at crwoodturner.com >http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > From aaronagesicki at gmail.com Thu Feb 3 16:47:39 2022 From: aaronagesicki at gmail.com (aaronagesicki at gmail.com) Date: Thu, 3 Feb 2022 16:47:39 -0600 Subject: [crw-talk] Birch bowl In-Reply-To: References: <707DBCA3-096F-40BE-9752-A8A8CF9E854C@mwt.net> <009201d81887$597ac7e0$0c7057a0$@gmail.com> Message-ID: <00c701d81950$0cec7210$26c55630$@gmail.com> Need a light box. Duane has one. Works great. Aaron Gesicki -----Original Message----- From: crw-talk On Behalf Of John & Donna Griffiths Sent: Thursday, February 3, 2022 10:50 AM To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. Subject: Re: [crw-talk] Birch bowl Hi Aaron, Working for natural light from a south facing window with a smart phone does present some photographic limitations. And I am not an accomplished photographer. j ------ Original Message ------ From: aaronagesicki at gmail.com To: "'Membership mailing list for the AAW Chapter Coulee Region Woodturners.'" Sent: 2/2/2022 4:50:58 PM Subject: Re: [crw-talk] Birch bowl >I like turned objects, especially natural edge stuff. >But...Unfortunately, now we need to work on the photography. > > >Aaron Gesicki > > > >-----Original Message----- >From: crw-talk > On >Behalf Of Mwt >Sent: Wednesday, February 2, 2022 12:45 PM >To: crw-talk at crwoodturner.com >Subject: [crw-talk] Birch bowl > >Here are some shots of a bowl made from log the shop teacher at Luther >donated to the club. Note the figure in the squarish end. >Must have been a fork near it, the other half of the log does not have >figure. >James, could you send it on to the teacher? >Josh, you can post this. > > > >_________________________________________ >Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >______ >crw-talk mailing list >crw-talk at crwoodturner.com >http://crwoodturner.com/mailman/listinfo/cr w-talk_crwoodturner.com >Check the archive to make sure your message was sent: >http://crwoodturner.com/pipermail/crw-talk_ crwoodturner.com/ > _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw -talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_c rwoodturner.com/ From wisawdust at charter.net Thu Feb 3 18:07:26 2022 From: wisawdust at charter.net (wisawdust) Date: Thu, 03 Feb 2022 18:07:26 -0600 Subject: [crw-talk] Birch bowl In-Reply-To: <00c701d81950$0cec7210$26c55630$@gmail.com> Message-ID: I have a light box????? I don't think soSent from my Galaxy -------- Original message --------From: aaronagesicki at gmail.com Date: 2/3/22 4:48 PM (GMT-06:00) To: 'John & Donna Griffiths' , "'Membership mailing list for the AAW Chapter Coulee Region Woodturners.'" Subject: Re: [crw-talk] Birch bowl Need a light box. Duane has one. Works great. Aaron Gesicki-----Original Message-----From: crw-talk OnBehalf Of John & Donna GriffithsSent: Thursday, February 3, 2022 10:50 AMTo: Membership mailing list for the AAWChapter Coulee Region Woodturners.Subject: Re: [crw-talk] Birch bowlHi Aaron, Working for natural light from asouth facing window with a smart phone doespresent some photographic limitations.? AndI am not an accomplished photographer.? j------ Original Message ------From: aaronagesicki at gmail.comTo: "'Membership mailing list for the AAWChapter Coulee Region Woodturners.'"Sent: 2/2/2022 4:50:58 PMSubject: Re: [crw-talk] Birch bowl>I like turned objects, especially naturaledge stuff. >But...Unfortunately, now we need to work onthe photography.>>>Aaron Gesicki>>>>-----Original Message----->From: crw-talk> On>Behalf Of Mwt>Sent: Wednesday, February 2, 2022 12:45 PM>To: crw-talk at crwoodturner.com>Subject: [crw-talk] Birch bowl>>Here are some shots of a bowl made from logthe shop teacher at Luther >donated to the club. Note the figure in thesquarish end.>Must have been a fork near it, the otherhalf of the log does not have >figure.>James, could you send it on to the teacher?>Josh, you can post this.>>>>_________________________________________>Use "Reply to All" or "Reply List" to reachthe whole group, "Reply" goes only tosender.>______>crw-talk mailing list>crw-talk at crwoodturner.com>http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com>Check the archive to make sure your messagewas sent: >http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/>_________________________________________Use "Reply to All" or "Reply List" to reachthe whole group, "Reply" goes only tosender.______crw-talk mailing listcrw-talk at crwoodturner.comhttp://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.comCheck the archive to make sure your messagewas sent:http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/_________________________________________Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.______crw-talk mailing listcrw-talk at crwoodturner.comhttp://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.comCheck the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From aaronagesicki at gmail.com Thu Feb 3 18:09:57 2022 From: aaronagesicki at gmail.com (aaronagesicki at gmail.com) Date: Thu, 3 Feb 2022 18:09:57 -0600 Subject: [crw-talk] Birch bowl In-Reply-To: <61fc6ea0.1c69fb81.6e051.39a5SMTPIN_ADDED_MISSING@mx.google.com> References: <00c701d81950$0cec7210$26c55630$@gmail.com> <61fc6ea0.1c69fb81.6e051.39a5SMTPIN_ADDED_MISSING@mx.google.com> Message-ID: <04bc01d8195b$8bb6a1f0$a323e5d0$@gmail.com> Sure you do. I borrowed it a few weeks ago. Aaron Gesicki From: crw-talk On Behalf Of wisawdust Sent: Thursday, February 3, 2022 6:07 PM To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. ; 'John & Donna Griffiths' Subject: Re: [crw-talk] Birch bowl I have a light box????? I don't think so Sent from my Galaxy -------- Original message -------- From: aaronagesicki at gmail.com Date: 2/3/22 4:48 PM (GMT-06:00) To: 'John & Donna Griffiths' >, "'Membership mailing list for the AAW Chapter Coulee Region Woodturners.'" > Subject: Re: [crw-talk] Birch bowl Need a light box. Duane has one. Works great. Aaron Gesicki -----Original Message----- From: crw-talk > On Behalf Of John & Donna Griffiths Sent: Thursday, February 3, 2022 10:50 AM To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. > Subject: Re: [crw-talk] Birch bowl Hi Aaron, Working for natural light from a south facing window with a smart phone does present some photographic limitations. And I am not an accomplished photographer. j ------ Original Message ------ From: aaronagesicki at gmail.com To: "'Membership mailing list for the AAW Chapter Coulee Region Woodturners.'" > Sent: 2/2/2022 4:50:58 PM Subject: Re: [crw-talk] Birch bowl >I like turned objects, especially natural edge stuff. >But...Unfortunately, now we need to work on the photography. > > >Aaron Gesicki > > > >-----Original Message----- >From: crw-talk > > On >Behalf Of Mwt >Sent: Wednesday, February 2, 2022 12:45 PM >To: crw-talk at crwoodturner.com >Subject: [crw-talk] Birch bowl > >Here are some shots of a bowl made from log the shop teacher at Luther >donated to the club. Note the figure in the squarish end. >Must have been a fork near it, the other half of the log does not have >figure. >James, could you send it on to the teacher? >Josh, you can post this. > > > >_________________________________________ >Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >______ >crw-talk mailing list >crw-talk at crwoodturner.com >http://crwoodturner.com/mailman/listinfo/cr w-talk_crwoodturner.com >Check the archive to make sure your message was sent: >http://crwoodturner.com/pipermail/crw-talk_ crwoodturner.com/ > _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw -talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_c rwoodturner.com/ _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From wisawdust at charter.net Thu Feb 3 18:55:58 2022 From: wisawdust at charter.net (wisawdust) Date: Thu, 03 Feb 2022 18:55:58 -0600 Subject: [crw-talk] Birch bowl In-Reply-To: <04bc01d8195b$8bb6a1f0$a323e5d0$@gmail.com> Message-ID: Oh, you mean the light tentSent from my Galaxy -------- Original message --------From: aaronagesicki at gmail.com Date: 2/3/22 6:10 PM (GMT-06:00) To: "'Membership mailing list for the AAW Chapter Coulee Region Woodturners.'" Subject: Re: [crw-talk] Birch bowl Sure you do. I borrowed it a few weeks ago. ??Aaron Gesicki???From: crw-talk On Behalf Of wisawdustSent: Thursday, February 3, 2022 6:07 PMTo: Membership mailing list for the AAW Chapter Coulee Region Woodturners. ; 'John & Donna Griffiths' Subject: Re: [crw-talk] Birch bowl?I have a light box????? I don't think so???Sent from my Galaxy??-------- Original message --------From: aaronagesicki at gmail.com Date: 2/3/22 4:48 PM (GMT-06:00) To: 'John & Donna Griffiths' , "'Membership mailing list for the AAW Chapter Coulee Region Woodturners.'" Subject: Re: [crw-talk] Birch bowl ?Need a light box. Duane has one. Works great. Aaron Gesicki-----Original Message-----From: crw-talk OnBehalf Of John & Donna GriffithsSent: Thursday, February 3, 2022 10:50 AMTo: Membership mailing list for the AAWChapter Coulee Region Woodturners.Subject: Re: [crw-talk] Birch bowlHi Aaron, Working for natural light from asouth facing window with a smart phone doespresent some photographic limitations.? AndI am not an accomplished photographer.? j------ Original Message ------From: aaronagesicki at gmail.comTo: "'Membership mailing list for the AAWChapter Coulee Region Woodturners.'"Sent: 2/2/2022 4:50:58 PMSubject: Re: [crw-talk] Birch bowl>I like turned objects, especially naturaledge stuff. >But...Unfortunately, now we need to work onthe photography.>>>Aaron Gesicki>>>>-----Original Message----->From: crw-talk> On>Behalf Of Mwt>Sent: Wednesday, February 2, 2022 12:45 PM>To: crw-talk at crwoodturner.com>Subject: [crw-talk] Birch bowl>>Here are some shots of a bowl made from logthe shop teacher at Luther >donated to the club. Note the figure in thesquarish end.>Must have been a fork near it, the otherhalf of the log does not have >figure.>James, could you send it on to the teacher?>Josh, you can post this.>>>>_________________________________________>Use "Reply to All" or "Reply List" to reachthe whole group, "Reply" goes only tosender.>______>crw-talk mailing list>crw-talk at crwoodturner.com>http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com>Check the archive to make sure your messagewas sent: >http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/>_________________________________________Use "Reply to All" or "Reply List" to reachthe whole group, "Reply" goes only tosender.______crw-talk mailing listcrw-talk at crwoodturner.comhttp://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.comCheck the archive to make sure your messagewas sent:http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/_________________________________________Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.______crw-talk mailing listcrw-talk at crwoodturner.comhttp://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.comCheck the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From EganR at westerntc.edu Sat Feb 5 16:33:53 2022 From: EganR at westerntc.edu (Egan, Richard) Date: Sat, 5 Feb 2022 22:33:53 +0000 Subject: [crw-talk] Wig stand Message-ID: My first attempt at one of these. Sent from my Verizon, Samsung Galaxy smartphone -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 20220205_163118_resized.jpg Type: image/jpeg Size: 880448 bytes Desc: 20220205_163118_resized.jpg URL: From aaronagesicki at gmail.com Sat Feb 5 16:43:45 2022 From: aaronagesicki at gmail.com (aaronagesicki at gmail.com) Date: Sat, 5 Feb 2022 16:43:45 -0600 Subject: [crw-talk] Wig stand In-Reply-To: References: Message-ID: <018201d81ae1$d64eec90$82ecc5b0$@gmail.com> And well done. Aaron Gesicki From: crw-talk On Behalf Of Egan, Richard Sent: Saturday, February 5, 2022 4:34 PM To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. ; Egan, Richard Subject: [crw-talk] Wig stand My first attempt at one of these. Sent from my Verizon, Samsung Galaxy smartphone -------------- next part -------------- An HTML attachment was scrubbed... URL: From jcmakestuff at gmail.com Sat Feb 5 16:44:51 2022 From: jcmakestuff at gmail.com (jcmakestuff) Date: Sat, 05 Feb 2022 16:44:51 -0600 Subject: [crw-talk] Wig stand In-Reply-To: Message-ID: <61fefde5.1c69fb81.19ad5.332d@mx.google.com> Rich,?Can I post this on the club's Instagram page?Sent from my U.S.Cellular? Smartphone -------- Original message --------From: "Egan, Richard" Date: 2/5/22 4:36 PM (GMT-06:00) To: "Membership mailing list for the AAW Chapter Coulee Region Woodturners." , "Egan, Richard" Subject: [crw-talk] Wig stand My first attempt at one of these. Sent from my Verizon, Samsung Galaxy smartphone -------------- next part -------------- An HTML attachment was scrubbed... URL: From EganR at westerntc.edu Sat Feb 5 17:01:00 2022 From: EganR at westerntc.edu (Egan, Richard) Date: Sat, 5 Feb 2022 23:01:00 +0000 Subject: [crw-talk] Wig stand In-Reply-To: <61fefde5.1c69fb81.19ad5.332d@mx.google.com> References: <61fefde5.1c69fb81.19ad5.332d@mx.google.com> Message-ID: Certainly. Post away Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: jcmakestuff Date: 2/5/22 4:45 PM (GMT-06:00) To: "Membership mailing list for the AAW Chapter Coulee Region Woodturners." Subject: Re: [crw-talk] Wig stand CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe. Rich, Can I post this on the club's Instagram page? Sent from my U.S.Cellular? Smartphone -------- Original message -------- From: "Egan, Richard" Date: 2/5/22 4:36 PM (GMT-06:00) To: "Membership mailing list for the AAW Chapter Coulee Region Woodturners." , "Egan, Richard" Subject: [crw-talk] Wig stand My first attempt at one of these. Sent from my Verizon, Samsung Galaxy smartphone -------------- next part -------------- An HTML attachment was scrubbed... URL: From rjpatros05 at gmail.com Sat Feb 5 19:39:56 2022 From: rjpatros05 at gmail.com (Robert Patros) Date: Sat, 5 Feb 2022 20:39:56 -0500 Subject: [crw-talk] Wig stand In-Reply-To: References: Message-ID: Very nice, Rich. Will be much appreciated. Sent from my iPhone > On Feb 5, 2022, at 5:34 PM, Egan, Richard wrote: > > ? > My first attempt at one of these. > > > > Sent from my Verizon, Samsung Galaxy smartphone > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 20220205_163118_resized.jpg Type: image/jpeg Size: 880448 bytes Desc: not available URL: From raaschb at charter.net Sat Feb 5 19:44:03 2022 From: raaschb at charter.net (Bob Raasch) Date: Sat, 5 Feb 2022 19:44:03 -0600 Subject: [crw-talk] Wig stand In-Reply-To: References: Message-ID: <00b601d81afb$05e4bde0$11ae39a0$@charter.net> Very nicely done Rich. Another one that will be much appreciated. Bob Raasch From: crw-talk On Behalf Of Egan, Richard Sent: Saturday, February 5, 2022 4:34 PM To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. ; Egan, Richard Subject: [crw-talk] Wig stand My first attempt at one of these. Sent from my Verizon, Samsung Galaxy smartphone -------------- next part -------------- An HTML attachment was scrubbed... URL: From griff at mwt.net Mon Feb 7 14:54:57 2022 From: griff at mwt.net (John & Donna Griffiths) Date: Mon, 07 Feb 2022 20:54:57 +0000 Subject: [crw-talk] Wig stand In-Reply-To: <00b601d81afb$05e4bde0$11ae39a0$@charter.net> References: <00b601d81afb$05e4bde0$11ae39a0$@charter.net> Message-ID: Nice colors, John ------ Original Message ------ From: "Bob Raasch" To: "'Membership mailing list for the AAW Chapter Coulee Region Woodturners.'" ; "'Egan, Richard'" Sent: 2/5/2022 7:44:03 PM Subject: Re: [crw-talk] Wig stand >Very nicely done Rich. Another one that will be much appreciated. > >Bob Raasch > > > >From: crw-talk On Behalf Of Egan, >Richard >Sent: Saturday, February 5, 2022 4:34 PM >To: Membership mailing list for the AAW Chapter Coulee Region >Woodturners. ; Egan, Richard > >Subject: [crw-talk] Wig stand > > > >My first attempt at one of these. > > > > > > > >Sent from my Verizon, Samsung Galaxy smartphone > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From Dfalch at hbci.com Wed Feb 9 13:07:12 2022 From: Dfalch at hbci.com (Doug Falch) Date: Wed, 9 Feb 2022 13:07:12 -0600 Subject: [crw-talk] Could you have the laters news letter sent to me need to send dues. Thanks Denis Message-ID: <24EB500E-CFB9-4254-BDB7-478D941C406B@hbci.com> Sent from my iPad From griff at mwt.net Wed Feb 9 14:06:15 2022 From: griff at mwt.net (John & Donna Griffiths) Date: Wed, 09 Feb 2022 20:06:15 +0000 Subject: [crw-talk] Could you have the laters news letter sent to me need to send dues. Thanks Denis In-Reply-To: <24EB500E-CFB9-4254-BDB7-478D941C406B@hbci.com> References: <24EB500E-CFB9-4254-BDB7-478D941C406B@hbci.com> Message-ID: Denis, Hi, Send the dues to Jay Johnson, 703 Granum St, Holmen WI 54636. Any questions call him at 608-780-2547. I sent him a copy of this. $36 for age 79 and younger, $25 for 80 and above. I have sent this to Aaron Gesicki, the newsletter guy now. He will get your name in his email system. I bet you remember him from the past. We are having a day-long Alan Lacer event for the April meeting. Hope you are up to getting back to meetings soon. Meanwhile I have been doing the door in your absence but I really want to see your face at the desk. John ------ Original Message ------ From: "Doug Falch" To: "Virginia Green" Sent: 2/9/2022 1:07:12 PM Subject: [crw-talk] Could you have the laters news letter sent to me need to send dues. Thanks Denis > > >Sent from my iPad > > >_________________________________________ >Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >______ >crw-talk mailing list >crw-talk at crwoodturner.com >http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > From griff at mwt.net Wed Feb 9 15:02:22 2022 From: griff at mwt.net (John & Donna Griffiths) Date: Wed, 09 Feb 2022 21:02:22 +0000 Subject: [crw-talk] Newsletter Message-ID: Members, Aaron did a great newsletter. Thank you Aaron One error attributable to me: The lidded box shown under my name is not mine. I think it is Duane Hill's, but I would love to take credit for that wonderful piece. Why my bad? I am the the one who took the pictures and forwarded them to Aaron, and the box was next to my stuff. John -------------- next part -------------- An HTML attachment was scrubbed... URL: From Dfalch at hbci.com Wed Feb 9 17:42:07 2022 From: Dfalch at hbci.com (Doug Falch) Date: Wed, 9 Feb 2022 17:42:07 -0600 Subject: [crw-talk] Could you have the laters news letter sent to me need to send dues. Thanks Denis In-Reply-To: References: Message-ID: <656448A2-F457-44F8-B535-5FA6E74A46E5@hbci.com> Thanks John you should look for a new volunteer to do the check in I like being a member of the club but I do not see coming to meetings my systems can not tolerate the exposure l still do turning. Take care. Denis Sent from my iPad > On Feb 9, 2022, at 2:07 PM, John & Donna Griffiths wrote: > > ?Denis, > > Hi, Send the dues to Jay Johnson, 703 Granum St, Holmen WI 54636. Any questions call him at 608-780-2547. I sent him a copy of this. $36 for age 79 and younger, $25 for 80 and above. > > I have sent this to Aaron Gesicki, the newsletter guy now. He will get your name in his email system. I bet you remember him from the past. > > We are having a day-long Alan Lacer event for the April meeting. Hope you are up to getting back to meetings soon. Meanwhile I have been doing the door in your absence but I really want to see your face at the desk. > > John > > ------ Original Message ------ > From: "Doug Falch" > To: "Virginia Green" > Sent: 2/9/2022 1:07:12 PM > Subject: [crw-talk] Could you have the laters news letter sent to me need to send dues. Thanks Denis > >> >> >> Sent from my iPad >> >> >> _________________________________________ >> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >> ______ >> crw-talk mailing list >> crw-talk at crwoodturner.com >> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ >> > > > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > From wisawdust at charter.net Thu Feb 10 08:39:45 2022 From: wisawdust at charter.net (wisawdust at charter.net) Date: Thu, 10 Feb 2022 14:39:45 +0000 Subject: [crw-talk] Newsletter Message-ID: John, the lidded box was brought by me but was actually done by a friend of Tom Austin's (A-Line) who I spent a day with in August. Very nice lidded box Duane -----------------------------------------From: "John & Donna Griffiths" To: "Membership mailing list for the AAW Chapter Coulee Region Woodturners." Cc: Sent: Wednesday February 9 2022 3:02:40PM Subject: [crw-talk] Newsletter Members, Aaron did a great newsletter. Thank you Aaron One error attributable to me: The lidded box shown under my name is not mine. I think it is Duane Hill's, but I would love to take credit for that wonderful piece. Why my bad? I am the the one who took the pictures and forwarded them to Aaron, and the box was next to my stuff. John -------------- next part -------------- An HTML attachment was scrubbed... URL: From griff at mwt.net Tue Feb 15 11:26:22 2022 From: griff at mwt.net (John & Donna Griffiths) Date: Tue, 15 Feb 2022 17:26:22 +0000 Subject: [crw-talk] Saturday meeting Message-ID: Hello Members, Heads up folks, if you have a wig stand completed, bring it to the meeting this Saturday for distribution. These are treasured gifts our club donates to cancer patients through treatment centers. Gundersen has been accepting them, and I think Winona Health will too. Bob Patros posted plans for wig stands on CRWTalk not long ago. They are not rocket science to make and do not have to be machined down to plus or minus .0001 inch to be acceptable. Thank you Bob. Also a member, Wendell Ziegler has donated a bunch of wood the club is selling, there are many pieces of wood that may be used for wig stands. Likewise, Adrian will be donating a bunch of blanks that will be available at the February meeting. When you see Wendell or Adrian, be sure to personally thank them for their donations. So on Saturday, please bring a wig stand if you have one made up, watch Ken Garden demonstrate weed pot and lidded box making and pay you dues if you have not yet done so. And of course, bring your instant gallery items to show the world. John -------------- next part -------------- An HTML attachment was scrubbed... URL: From raaschb at charter.net Tue Feb 15 17:13:21 2022 From: raaschb at charter.net (Bob R) Date: Tue, 15 Feb 2022 17:13:21 -0600 Subject: [crw-talk] Saturday meeting Message-ID: Members, To dovetail on John's comment, I appreciate his continuing? promotion for the wig stands project. As I deliver the ones already completed, I echo John's comment that they are indeed treasured by the cancer care recipients. As you complete the wig stands, please send a quality picture or 2 of your work to crw talk. I think pics are another way to help motivate and remind us. Please be sure to include your name & wood type(s) used on the stand bottom As an example, see attached picture. I plan to drop by Saturday's meeting to pick up any additional stands you've completed; taking them to Gundersen next week. As I have no connections at Winona Health (WH), if you want your stands to go to WH, please attach a label as such. Whoever has that WH contact should plan on taking them.? Folks, thank you for time and talents for this project. Bob Raasch Bob R, Sent from my Phone On Feb 15, 2022 11:26 AM, John & Donna Griffiths wrote: > > Hello Members, > > Heads up folks, if you have a wig stand completed, bring it to the meeting this Saturday for distribution.? These are treasured gifts our club donates to cancer patients through treatment centers.? Gundersen has been accepting them, and I think Winona Health will too.? Bob Patros posted plans for wig stands on CRWTalk not long ago.? They are not rocket science to make and do not have to be machined down to plus or minus .0001 inch to be acceptable. Thank you Bob. > > Also a member, Wendell Ziegler has donated a bunch of wood the club is selling, there are many pieces of wood that may be used for wig stands.? Likewise, Adrian will be donating a bunch of blanks that will be available at the February meeting. When you see Wendell or Adrian, be sure to personally thank them for their donations. > > So on Saturday, please bring a wig stand if you have one made up, watch Ken Garden demonstrate weed pot and lidded box making and pay you dues if you have not yet done so.? And of course, bring your instant gallery items to show the world. > > John -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_20220116_163639082~2.jpg Type: image/jpeg Size: 1243094 bytes Desc: not available URL: From marine9096 at gmail.com Wed Feb 16 16:31:35 2022 From: marine9096 at gmail.com (James Bloomer) Date: Wed, 16 Feb 2022 16:31:35 -0600 Subject: [crw-talk] Saturday zoom link Message-ID: James Bloomer is inviting you to a scheduled Zoom meeting. Topic: James Bloomer's Zoom Meeting Time: Feb 19, 2022 09:00 AM Central Time (US and Canada) Join Zoom Meeting https://us02web.zoom.us/j/8076430043?pwd=ajdBSnlOUVpkcEJndnQ5TTMzQ1pQdz09 Meeting ID: 807 643 0043 Passcode: 836573 One tap mobile +13126266799,,8076430043#,,,,*836573# US (Chicago) +19292056099,,8076430043#,,,,*836573# US (New York) Dial by your location +1 312 626 6799 US (Chicago) +1 929 205 6099 US (New York) +1 301 715 8592 US (Washington DC) +1 346 248 7799 US (Houston) +1 669 900 6833 US (San Jose) +1 253 215 8782 US (Tacoma) Meeting ID: 807 643 0043 Passcode: 836573 Find your local number: https://us02web.zoom.us/u/kfQHOzLdd -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: text/calendar Size: 1177 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Zoom-Meeting.ics Type: text/calendar Size: 1176 bytes Desc: not available URL: From jdcrow1956 at yahoo.com Wed Feb 16 20:10:06 2022 From: jdcrow1956 at yahoo.com (John Fisher) Date: Thu, 17 Feb 2022 02:10:06 +0000 (UTC) Subject: [crw-talk] Saturday zoom link In-Reply-To: References: Message-ID: <317398531.3073070.1645063806693@mail.yahoo.com> Thanks for the zoom info but I have other obligations this Saturday. Lisa and I signed up for a Bee Keeping class and then I have to set up and help run our annual church event afterward.? Have fun.? ? On Wednesday, February 16, 2022, 04:32:23 PM CST, James Bloomer wrote: James Bloomer is inviting you to a scheduled Zoom meeting. Topic: James Bloomer's Zoom Meeting Time: Feb 19, 2022 09:00 AM Central Time (US and Canada) Join Zoom Meeting https://us02web.zoom.us/j/8076430043?pwd=ajdBSnlOUVpkcEJndnQ5TTMzQ1pQdz09 Meeting ID: 807 643 0043 Passcode: 836573 One tap mobile +13126266799,,8076430043#,,,,*836573# US (Chicago) +19292056099,,8076430043#,,,,*836573# US (New York) Dial by your location ??????? +1 312 626 6799 US (Chicago) ??????? +1 929 205 6099 US (New York) ??????? +1 301 715 8592 US (Washington DC) ??????? +1 346 248 7799 US (Houston) ??????? +1 669 900 6833 US (San Jose) ??????? +1 253 215 8782 US (Tacoma) Meeting ID: 807 643 0043 Passcode: 836573 Find your local number: https://us02web.zoom.us/u/kfQHOzLdd ?_________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From rjpatros05 at gmail.com Thu Feb 17 09:27:56 2022 From: rjpatros05 at gmail.com (Robert Patros) Date: Thu, 17 Feb 2022 09:27:56 -0600 Subject: [crw-talk] Finish for wig stands Message-ID: <09E55F78-1946-4DC6-B9E0-1F92F9DD119C@gmail.com> Some may not have seen the article I sent out awhile back making a wig stand. I thought it was worth mentioning this author?s finishing recommendations for wig stands if you?re on your own. Please see below. -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_6646.jpg Type: image/jpeg Size: 1865658 bytes Desc: not available URL: -------------- next part -------------- Sent from my iPhone From rjpatros05 at gmail.com Thu Feb 17 10:55:47 2022 From: rjpatros05 at gmail.com (Robert Patros) Date: Thu, 17 Feb 2022 10:55:47 -0600 Subject: [crw-talk] Wig stand finished Message-ID: <25F89BA1-86A9-4B5A-B57A-B62F916992DB@gmail.com> Finished just in time for Saturday?s meeting! -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_6649.jpg Type: image/jpeg Size: 1943017 bytes Desc: not available URL: -------------- next part -------------- Sent from my iPhone From EganR at westerntc.edu Thu Feb 17 11:05:19 2022 From: EganR at westerntc.edu (Egan, Richard) Date: Thu, 17 Feb 2022 17:05:19 +0000 Subject: [crw-talk] Wig stand finished In-Reply-To: <25F89BA1-86A9-4B5A-B57A-B62F916992DB@gmail.com> References: <25F89BA1-86A9-4B5A-B57A-B62F916992DB@gmail.com> Message-ID: That is nice, but hey, look at that table! From: crw-talk On Behalf Of Robert Patros Sent: Thursday, February 17, 2022 10:56 AM To: crw-talk at crwoodturner.com Subject: [crw-talk] Wig stand finished CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe. Finished just in time for Saturday?s meeting! [cid:image001.jpg at 01D823EE.3EAE7980] Sent from my iPhone _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 2271743 bytes Desc: image001.jpg URL: From rjpatros05 at gmail.com Thu Feb 17 11:25:27 2022 From: rjpatros05 at gmail.com (Robert Patros) Date: Thu, 17 Feb 2022 11:25:27 -0600 Subject: [crw-talk] Wig stand finished In-Reply-To: References: Message-ID: Thanks, Rich! Good story behind that table. I?ll tell you sometime. Sent from my iPhone > On Feb 17, 2022, at 11:06 AM, Egan, Richard wrote: > > ? > That is nice, but hey, look at that table! > > From: crw-talk On Behalf Of Robert Patros > Sent: Thursday, February 17, 2022 10:56 AM > To: crw-talk at crwoodturner.com > Subject: [crw-talk] Wig stand finished > > CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe. > > > Finished just in time for Saturday?s meeting! > > > > > Sent from my iPhone > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 2271743 bytes Desc: not available URL: From raaschb at charter.net Thu Feb 17 12:17:32 2022 From: raaschb at charter.net (Bob R) Date: Thu, 17 Feb 2022 12:17:32 -0600 Subject: [crw-talk] Wig stand finished Message-ID: Very nice, Bob, will make some patient very appreciative. Raasch Bob R, Sent from my Phone On Feb 17, 2022 10:55 AM, Robert Patros wrote: > > Finished just in time for Saturday?s meeting! > > > > Sent from my iPhone > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ From rjpatros05 at gmail.com Thu Feb 17 12:20:02 2022 From: rjpatros05 at gmail.com (Robert Patros) Date: Thu, 17 Feb 2022 12:20:02 -0600 Subject: [crw-talk] Wig stand finished In-Reply-To: <620e9168.1c69fb81.5b0f1.d556SMTPIN_ADDED_MISSING@mx.google.com> References: <620e9168.1c69fb81.5b0f1.d556SMTPIN_ADDED_MISSING@mx.google.com> Message-ID: <35744961-BA0D-4071-8359-7827705C00E3@gmail.com> That?s the plan. Thank you! Sent from my iPhone > On Feb 17, 2022, at 12:18 PM, Bob R wrote: > > ?Very nice, Bob, will make some patient very appreciative. > Raasch > Bob R, Sent from my Phone >> On Feb 17, 2022 10:55 AM, Robert Patros wrote: >> >> Finished just in time for Saturday?s meeting! >> >> >> >> Sent from my iPhone >> _________________________________________ >> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >> ______ >> crw-talk mailing list >> crw-talk at crwoodturner.com >> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ From ldsolem at aol.com Thu Feb 17 15:59:27 2022 From: ldsolem at aol.com (ldsolem at aol.com) Date: Thu, 17 Feb 2022 15:59:27 -0600 Subject: [crw-talk] Wig stand finished Message-ID: <000b01d82449$a23207f0$e69617d0$@aol.com> Bob Very nice wig stand. What are the dimensions for wig stands Lyle Solem -----Original Message----- From: crw-talk On Behalf Of Bob R Sent: Thursday, February 17, 2022 12:18 PM To: Bob Patros Cc: CRW talk Subject: Re: [crw-talk] Wig stand finished Very nice, Bob, will make some patient very appreciative. Raasch Bob R, Sent from my Phone On Feb 17, 2022 10:55 AM, Robert Patros wrote: > > Finished just in time for Saturday?s meeting! > > > > Sent from my iPhone > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ From raaschb at charter.net Thu Feb 17 20:01:37 2022 From: raaschb at charter.net (raaschb at charter.net) Date: Thu, 17 Feb 2022 20:01:37 -0600 Subject: [crw-talk] Finish for wig stands In-Reply-To: <09E55F78-1946-4DC6-B9E0-1F92F9DD119C@gmail.com> References: <09E55F78-1946-4DC6-B9E0-1F92F9DD119C@gmail.com> Message-ID: <033601d8246b$77820560$66861020$@charter.net> Would wipe on poly work? -----Original Message----- From: crw-talk On Behalf Of Robert Patros Sent: Thursday, February 17, 2022 9:28 AM To: crw-talk at crwoodturner.com Subject: [crw-talk] Finish for wig stands Some may not have seen the article I sent out awhile back making a wig stand. I thought it was worth mentioning this author?s finishing recommendations for wig stands if you?re on your own. Please see below. From aaronagesicki at gmail.com Thu Feb 17 20:04:50 2022 From: aaronagesicki at gmail.com (aaronagesicki at gmail.com) Date: Thu, 17 Feb 2022 20:04:50 -0600 Subject: [crw-talk] Wig stand finished In-Reply-To: References: Message-ID: <00b001d8246b$ea409030$bec1b090$@gmail.com> Inquiring minds want to hear more. Time for your TED talk. Aaron Gesicki From: crw-talk On Behalf Of Robert Patros Sent: Thursday, February 17, 2022 11:25 AM To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. Subject: Re: [crw-talk] Wig stand finished Thanks, Rich! Good story behind that table. I?ll tell you sometime. Sent from my iPhone On Feb 17, 2022, at 11:06 AM, Egan, Richard > wrote: ? That is nice, but hey, look at that table! From: crw-talk > On Behalf Of Robert Patros Sent: Thursday, February 17, 2022 10:56 AM To: crw-talk at crwoodturner.com Subject: [crw-talk] Wig stand finished CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe. Finished just in time for Saturday?s meeting! Sent from my iPhone _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 2271743 bytes Desc: not available URL: From rjpatros05 at gmail.com Thu Feb 17 21:15:17 2022 From: rjpatros05 at gmail.com (Robert Patros) Date: Thu, 17 Feb 2022 21:15:17 -0600 Subject: [crw-talk] Wig stand finished In-Reply-To: <00b001d8246b$ea409030$bec1b090$@gmail.com> References: <00b001d8246b$ea409030$bec1b090$@gmail.com> Message-ID: <366A46DB-0267-4310-ADB9-393F7D6AF08A@gmail.com> I?ll share with you and Rich. Sent from my iPhone > On Feb 17, 2022, at 8:07 PM, aaronagesicki at gmail.com wrote: > > ? > Inquiring minds want to hear more. > Time for your TED talk. > > > Aaron Gesicki > > > > From: crw-talk On Behalf Of Robert Patros > Sent: Thursday, February 17, 2022 11:25 AM > To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. > Subject: Re: [crw-talk] Wig stand finished > > Thanks, Rich! Good story behind that table. I?ll tell you sometime. > > Sent from my iPhone > > > On Feb 17, 2022, at 11:06 AM, Egan, Richard wrote: > > ? > That is nice, but hey, look at that table! > > From: crw-talk On Behalf Of Robert Patros > Sent: Thursday, February 17, 2022 10:56 AM > To: crw-talk at crwoodturner.com > Subject: [crw-talk] Wig stand finished > > CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe. > > > Finished just in time for Saturday?s meeting! > > > > > Sent from my iPhone > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 2271743 bytes Desc: not available URL: From rjpatros05 at gmail.com Thu Feb 17 21:16:23 2022 From: rjpatros05 at gmail.com (Robert Patros) Date: Thu, 17 Feb 2022 21:16:23 -0600 Subject: [crw-talk] Finish for wig stands In-Reply-To: <033601d8246b$77820560$66861020$@charter.net> References: <033601d8246b$77820560$66861020$@charter.net> Message-ID: I haven?t used it. Others may know. Sent from my iPhone > On Feb 17, 2022, at 8:02 PM, raaschb at charter.net wrote: > > ?Would wipe on poly work? > > -----Original Message----- > From: crw-talk On Behalf Of Robert Patros > Sent: Thursday, February 17, 2022 9:28 AM > To: crw-talk at crwoodturner.com > Subject: [crw-talk] Finish for wig stands > > Some may not have seen the article I sent out awhile back making a wig stand. I thought it was worth mentioning this author?s finishing recommendations for wig stands if you?re on your own. Please see below. > > > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ From mogoldfish at yahoo.com Fri Feb 18 04:53:04 2022 From: mogoldfish at yahoo.com (Kristine Clough) Date: Fri, 18 Feb 2022 10:53:04 +0000 (UTC) Subject: [crw-talk] Wig stand finished In-Reply-To: <366A46DB-0267-4310-ADB9-393F7D6AF08A@gmail.com> References: <00b001d8246b$ea409030$bec1b090$@gmail.com> <366A46DB-0267-4310-ADB9-393F7D6AF08A@gmail.com> Message-ID: <344819459.2283846.1645181584954@mail.yahoo.com> Inspiring minds do want to know.? I noticed the table too. Kris Sent from Yahoo Mail on Android On Thu, Feb 17, 2022 at 9:16 PM, Robert Patros wrote: _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From andrewpingree at gmail.com Fri Feb 18 17:00:30 2022 From: andrewpingree at gmail.com (Andrew) Date: Fri, 18 Feb 2022 17:00:30 -0600 Subject: [crw-talk] Saturday meeting In-Reply-To: <620c33bd.1c69fb81.3723e.1ecdSMTPIN_ADDED_MISSING@mx.google.com> References: <620c33bd.1c69fb81.3723e.1ecdSMTPIN_ADDED_MISSING@mx.google.com> Message-ID: I have a wig stand that I was planning on bringing to Saturday's meeting, but thanks to the stomach flu ripping through our house, I won't be coming. Should I just save the stand until the March meeting, or is delivery needed before then? Thanks, Andrew On Tue, Feb 15, 2022, 5:14 PM Bob R wrote: > Members, > To dovetail on John's comment, I appreciate his continuing promotion for > the wig stands project. As I deliver the ones already completed, I echo > John's comment that they are indeed treasured by the cancer care > recipients. > As you complete the wig stands, please send a quality picture or 2 of your > work to crw talk. I think pics are another way to help motivate and remind > us. Please be sure to include your name & wood type(s) used on the stand > bottom As an example, see attached picture. > > I plan to drop by Saturday's meeting to pick up any additional stands > you've completed; taking them to Gundersen next week. > As I have no connections at Winona Health (WH), if you want your stands to > go to WH, please attach a label as such. Whoever has that WH contact should > plan on taking them. > Folks, thank you for time and talents for this project. > Bob Raasch > > *Bob R, Sent from my Phone* > On Feb 15, 2022 11:26 AM, John & Donna Griffiths wrote: > > Hello Members, > > Heads up folks, if you have a wig stand completed, bring it to the meeting > this Saturday for distribution. These are treasured gifts our club donates > to cancer patients through treatment centers. Gundersen has been accepting > them, and I think Winona Health will too. Bob Patros posted plans for wig > stands on CRWTalk not long ago. They are not rocket science to make and do > not have to be machined down to plus or minus .0001 inch to be acceptable. > Thank you Bob. > > Also a member, Wendell Ziegler has donated a bunch of wood the club is > selling, there are many pieces of wood that may be used for wig stands. > Likewise, Adrian will be donating a bunch of blanks that will be available > at the February meeting. When you see Wendell or Adrian, be sure to > personally thank them for their donations. > > So on Saturday, please bring a wig stand if you have one made up, watch > Ken Garden demonstrate weed pot and lidded box making and pay you dues if > you have not yet done so. And of course, bring your instant gallery items > to show the world. > > John > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes > only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: > http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > -------------- next part -------------- An HTML attachment was scrubbed... URL: From raaschb at charter.net Fri Feb 18 17:49:04 2022 From: raaschb at charter.net (Bob R) Date: Fri, 18 Feb 2022 17:49:04 -0600 Subject: [crw-talk] Saturday meeting Message-ID: Hi Andrew, Feel free to bring to a future meeting. I suspect they'll be dribbling in by makers over the next several months. Take a pic, send to crw talk to help motivate the members as desired. Thank you in advance for making one. Bob Raasch Sent from my Phone On Feb 18, 2022 5:00 PM, Andrew wrote: > > I have a wig stand that I was planning on bringing to Saturday's meeting, but thanks to the stomach flu ripping through our house,? I won't be coming. Should I just save the stand until the March?meeting, or is delivery needed before?then? > > Thanks,?? > Andrew > > On Tue, Feb 15, 2022, 5:14 PM Bob R wrote: >> >> Members, >> To dovetail on John's comment, I appreciate his continuing? promotion for the wig stands project. As I deliver the ones already completed, I echo John's comment that they are indeed treasured by the cancer care recipients. >> As you complete the wig stands, please send a quality picture or 2 of your work to crw talk. I think pics are another way to help motivate and remind us. Please be sure to include your name & wood type(s) used on the stand bottom As an example, see attached picture. >> >> I plan to drop by Saturday's meeting to pick up any additional stands you've completed; taking them to Gundersen next week. >> As I have no connections at Winona Health (WH), if you want your stands to go to WH, please attach a label as such. Whoever has that WH contact should plan on taking them.? >> Folks, thank you for time and talents for this project. >> Bob Raasch >> >> Bob R, Sent from my Phone >> On Feb 15, 2022 11:26 AM, John & Donna Griffiths wrote: >>> >>> Hello Members, >>> >>> Heads up folks, if you have a wig stand completed, bring it to the meeting this Saturday for distribution.? These are treasured gifts our club donates to cancer patients through treatment centers.? Gundersen has been accepting them, and I think Winona Health will too.? Bob Patros posted plans for wig stands on CRWTalk not long ago.? They are not rocket science to make and do not have to be machined down to plus or minus .0001 inch to be acceptable. Thank you Bob. >>> >>> Also a member, Wendell Ziegler has donated a bunch of wood the club is selling, there are many pieces of wood that may be used for wig stands.? Likewise, Adrian will be donating a bunch of blanks that will be available at the February meeting. When you see Wendell or Adrian, be sure to personally thank them for their donations. >>> >>> So on Saturday, please bring a wig stand if you have one made up, watch Ken Garden demonstrate weed pot and lidded box making and pay you dues if you have not yet done so.? And of course, bring your instant gallery items to show the world. >>> >>> John >> >> _________________________________________ >> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >> ______ >> crw-talk mailing list >> crw-talk at crwoodturner.com >> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From raaschb at charter.net Fri Feb 18 18:10:57 2022 From: raaschb at charter.net (Bob R) Date: Fri, 18 Feb 2022 18:10:57 -0600 Subject: [crw-talk] Saturday meeting- wig stands Message-ID: I should have included in my response, that I take the stands to Gundersen's Cancer Center as I get them. Taylor, my contact there, understands our process & appreciates our efforts.? I look forward to keep the process going. Thank you to all the stand makers. Bob R, Sent from my Phone On Feb 18, 2022 5:49 PM, Bob R wrote: > > Hi Andrew, > Feel free to bring to a future meeting. I suspect they'll be dribbling in by makers over the next several months. Take a pic, send to crw talk to help motivate the members as desired. Thank you in advance for making one. > Bob Raasch > > Sent from my Phone > On Feb 18, 2022 5:00 PM, Andrew wrote: >> >> I have a wig stand that I was planning on bringing to Saturday's meeting, but thanks to the stomach flu ripping through our house,? I won't be coming. Should I just save the stand until the March?meeting, or is delivery needed before?then? >> >> Thanks,?? >> Andrew >> >> On Tue, Feb 15, 2022, 5:14 PM Bob R wrote: >>> >>> Members, >>> To dovetail on John's comment, I appreciate his continuing? promotion for the wig stands project. As I deliver the ones already completed, I echo John's comment that they are indeed treasured by the cancer care recipients. >>> As you complete the wig stands, please send a quality picture or 2 of your work to crw talk. I think pics are another way to help motivate and remind us. Please be sure to include your name & wood type(s) used on the stand bottom As an example, see attached picture. >>> >>> I plan to drop by Saturday's meeting to pick up any additional stands you've completed; taking them to Gundersen next week. >>> As I have no connections at Winona Health (WH), if you want your stands to go to WH, please attach a label as such. Whoever has that WH contact should plan on taking them.? >>> Folks, thank you for time and talents for this project. >>> Bob Raasch >>> >>> Bob R, Sent from my Phone >>> On Feb 15, 2022 11:26 AM, John & Donna Griffiths wrote: >>>> >>>> Hello Members, >>>> >>>> Heads up folks, if you have a wig stand completed, bring it to the meeting this Saturday for distribution.? These are treasured gifts our club donates to cancer patients through treatment centers.? Gundersen has been accepting them, and I think Winona Health will too.? Bob Patros posted plans for wig stands on CRWTalk not long ago.? They are not rocket science to make and do not have to be machined down to plus or minus .0001 inch to be acceptable. Thank you Bob. >>>> >>>> Also a member, Wendell Ziegler has donated a bunch of wood the club is selling, there are many pieces of wood that may be used for wig stands.? Likewise, Adrian will be donating a bunch of blanks that will be available at the February meeting. When you see Wendell or Adrian, be sure to personally thank them for their donations. >>>> >>>> So on Saturday, please bring a wig stand if you have one made up, watch Ken Garden demonstrate weed pot and lidded box making and pay you dues if you have not yet done so.? And of course, bring your instant gallery items to show the world. >>>> >>>> John >>> >>> _________________________________________ >>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >>> ______ >>> crw-talk mailing list >>> crw-talk at crwoodturner.com >>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From ldsolem at aol.com Sat Feb 19 09:14:15 2022 From: ldsolem at aol.com (ldsolem at aol.com) Date: Sat, 19 Feb 2022 09:14:15 -0600 Subject: [crw-talk] Saturday meeting- wig stands Message-ID: <03d701d825a3$5c8cfbf0$15a6f3d0$@aol.com> Bob Is the meeting on Zoom this morning? I would like to sign in? Lyle Solem From: crw-talk On Behalf Of Bob R Sent: Friday, February 18, 2022 6:11 PM To: andrewpingree at gmail.com Cc: CRW talk Subject: Re: [crw-talk] Saturday meeting- wig stands I should have included in my response, that I take the stands to Gundersen's Cancer Center as I get them. Taylor, my contact there, understands our process & appreciates our efforts. I look forward to keep the process going. Thank you to all the stand makers. Bob R, Sent from my Phone On Feb 18, 2022 5:49 PM, Bob R > wrote: Hi Andrew, Feel free to bring to a future meeting. I suspect they'll be dribbling in by makers over the next several months. Take a pic, send to crw talk to help motivate the members as desired. Thank you in advance for making one. Bob Raasch Sent from my Phone On Feb 18, 2022 5:00 PM, Andrew > wrote: I have a wig stand that I was planning on bringing to Saturday's meeting, but thanks to the stomach flu ripping through our house, I won't be coming. Should I just save the stand until the March meeting, or is delivery needed before then? Thanks, Andrew On Tue, Feb 15, 2022, 5:14 PM Bob R > wrote: Members, To dovetail on John's comment, I appreciate his continuing promotion for the wig stands project. As I deliver the ones already completed, I echo John's comment that they are indeed treasured by the cancer care recipients. As you complete the wig stands, please send a quality picture or 2 of your work to crw talk. I think pics are another way to help motivate and remind us. Please be sure to include your name & wood type(s) used on the stand bottom As an example, see attached picture. I plan to drop by Saturday's meeting to pick up any additional stands you've completed; taking them to Gundersen next week. As I have no connections at Winona Health (WH), if you want your stands to go to WH, please attach a label as such. Whoever has that WH contact should plan on taking them. Folks, thank you for time and talents for this project. Bob Raasch Bob R, Sent from my Phone On Feb 15, 2022 11:26 AM, John & Donna Griffiths > wrote: Hello Members, Heads up folks, if you have a wig stand completed, bring it to the meeting this Saturday for distribution. These are treasured gifts our club donates to cancer patients through treatment centers. Gundersen has been accepting them, and I think Winona Health will too. Bob Patros posted plans for wig stands on CRWTalk not long ago. They are not rocket science to make and do not have to be machined down to plus or minus .0001 inch to be acceptable. Thank you Bob. Also a member, Wendell Ziegler has donated a bunch of wood the club is selling, there are many pieces of wood that may be used for wig stands. Likewise, Adrian will be donating a bunch of blanks that will be available at the February meeting. When you see Wendell or Adrian, be sure to personally thank them for their donations. So on Saturday, please bring a wig stand if you have one made up, watch Ken Garden demonstrate weed pot and lidded box making and pay you dues if you have not yet done so. And of course, bring your instant gallery items to show the world. John _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From andrewpingree at gmail.com Sat Feb 19 16:34:08 2022 From: andrewpingree at gmail.com (Andrew) Date: Sat, 19 Feb 2022 16:34:08 -0600 Subject: [crw-talk] Wigstand Message-ID: Here's my first attempt. It's a bit top heavy. I'll have a go at another one. Andrew -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 20220219_162703.jpg Type: image/jpeg Size: 4494617 bytes Desc: not available URL: From rjpatros05 at gmail.com Sat Feb 19 18:33:26 2022 From: rjpatros05 at gmail.com (Robert Patros) Date: Sat, 19 Feb 2022 18:33:26 -0600 Subject: [crw-talk] Wigstand In-Reply-To: References: Message-ID: Very nice design, Andrew. Should be fine. Good job! Sent from my iPhone > On Feb 19, 2022, at 4:35 PM, Andrew wrote: > > ? > Here's my first attempt. It's a bit top heavy. I'll have a go at another one. > > Andrew -------------- next part -------------- A non-text attachment was scrubbed... Name: 20220219_162703.jpg Type: image/jpeg Size: 4494617 bytes Desc: not available URL: -------------- next part -------------- > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ From raaschb at charter.net Sat Feb 19 20:44:22 2022 From: raaschb at charter.net (Bob R) Date: Sat, 19 Feb 2022 20:44:22 -0600 Subject: [crw-talk] Wigstand Message-ID: Looks good Andrew. Nice shape. Bob R, Sent from my Phone On Feb 19, 2022 4:34 PM, Andrew wrote: > > Here's my first attempt.? It's a bit top heavy.? I'll have a go at another one.? > > Andrew -------------- next part -------------- An HTML attachment was scrubbed... URL: From griff at mwt.net Sun Feb 20 09:59:16 2022 From: griff at mwt.net (John & Donna Griffiths) Date: Sun, 20 Feb 2022 15:59:16 +0000 Subject: [crw-talk] Wigstand In-Reply-To: References: Message-ID: Andrew, and the CRW fellowship, I think it is ready for prime time. We will of course be collecting them again at the March meeting and In my opinion, a very wide range of design options is possible with them. Of course, if you are moved to keep perfecting your design, more power to you. Lots of people at the Gundersen and Winona Health cancer centers are in need of them; and we all know that we ourselves are the harshest critics of our work. So just keep making! And one other design matter, wig stands are a great way to use up those odd bits of wood we all have laying around on our shelves, under the benches, on the floor (Yup, that's me). So there is a ton of design freedom just built into the project. Another factor is that the users of wig stands tend to be older women who are less likely to have very long hair, so taller stands will benefit some ladies and shorter ones will be welcomed by others as I am guessing that women who need wigs during chemo are likely to wear wigs that more or less match their hair length from before treatment. John ------ Original Message ------ From: "Robert Patros" To: "Membership mailing list for the AAW Chapter Coulee Region Woodturners." Sent: 2/19/2022 6:33:26 PM Subject: Re: [crw-talk] Wigstand >Very nice design, Andrew. Should be fine. Good job! > >Sent from my iPhone > >> On Feb 19, 2022, at 4:35 PM, Andrew wrote: >> >> ? >> Here's my first attempt. It's a bit top heavy. I'll have a go at another one. >> >> Andrew -------------- next part -------------- An HTML attachment was scrubbed... URL: From griff at mwt.net Sun Feb 20 10:19:45 2022 From: griff at mwt.net (John & Donna Griffiths) Date: Sun, 20 Feb 2022 16:19:45 +0000 Subject: [crw-talk] Finish for wig stands In-Reply-To: References: <033601d8246b$77820560$66861020$@charter.net> Message-ID: Members , I have been a bit delinquent on my emails, just found this one. Wipe On Poly is an excellent finish for wig stands, it is impervious to darn near anything! ------ Original Message ------ From: "Robert Patros" To: "Membership mailing list for the AAW Chapter Coulee Region Woodturners." Sent: 2/17/2022 9:16:23 PM Subject: Re: [crw-talk] Finish for wig stands >I haven?t used it. Others may know. > >Sent from my iPhone > >> On Feb 17, 2022, at 8:02 PM, raaschb at charter.net wrote: >> >> ?Would wipe on poly work? >> >> -----Original Message----- >> From: crw-talk On Behalf Of Robert Patros >> Sent: Thursday, February 17, 2022 9:28 AM >> To: crw-talk at crwoodturner.com >> Subject: [crw-talk] Finish for wig stands >> >> Some may not have seen the article I sent out awhile back making a wig stand. I thought it was worth mentioning this author?s finishing recommendations for wig stands if you?re on your own. Please see below. >> >> >> >> _________________________________________ >> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >> ______ >> crw-talk mailing list >>crw-talk at crwoodturner.com >>http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > >_________________________________________ >Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >______ >crw-talk mailing list >crw-talk at crwoodturner.com >http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ From aaronagesicki at gmail.com Sun Feb 20 10:43:22 2022 From: aaronagesicki at gmail.com (aaronagesicki at gmail.com) Date: Sun, 20 Feb 2022 10:43:22 -0600 Subject: [crw-talk] Turning a Wig Stand Message-ID: <069401d82678$fcb6f790$f624e6b0$@gmail.com> For all who are interested in this topic. There have been some questions about size, shape, and what finish to use. The finish concern is interactions with the wig materials over time. This is my opinion - I'll be using my rather standard finish - Here's a link https://www.minwax.com/wood-products/clear-p rotective-finishes/interior/minwax-fastdryin g-polyurethane? &utm_medium=paid-search&utm_source=google&ut m_campaign=nb-stain-evergreen&utm_term=stain -finishes&gclid=CjwKCAiA6seQBhAfEiwAvPqu1x4- 2JjQoVTc067KCQ65Jz2-WS-iqrBu_jO7KEV328RMKh6O AixpeRoCvzIQAvD_BwE&gclsrc=aw.ds I choose the highest gloss version. I wipe on a heavy coat, let it sink in, and then [10 minutes or so], wipe off the excess. Next day, do it again, this time lightly wiping on without any subsequent wiping off. Two, or maybe three, wiped on thin coats will suffice. In several days, it's odor free and hard. At this point, it'll be good for many years to come. Aaron Gesicki 1317 Woodpark Road Winona, MN 55987 507-615-0233 home 303-551-2450 cell -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Wig Stand.pdf Type: application/pdf Size: 312970 bytes Desc: not available URL: From aaronagesicki at gmail.com Sun Feb 20 11:02:01 2022 From: aaronagesicki at gmail.com (aaronagesicki at gmail.com) Date: Sun, 20 Feb 2022 11:02:01 -0600 Subject: [crw-talk] Contacts Message-ID: <075a01d8267b$9499cd10$bdcd6730$@gmail.com> Earlier this morning I sent mail to all the members. I received Undeliverable notices for email to 3 members: Wendell Ziegler Larry McTaggart Marvin Meyer If anyone knows them and has their phone number, please contact them with this info. Aaron Gesicki 1317 Woodpark Road Winona, MN 55987 507-615-0233 home 303-551-2450 cell -------------- next part -------------- An HTML attachment was scrubbed... URL: From raaschb at charter.net Sun Feb 20 16:32:12 2022 From: raaschb at charter.net (Bob Raasch) Date: Sun, 20 Feb 2022 16:32:12 -0600 Subject: [crw-talk] Contacts In-Reply-To: <075a01d8267b$9499cd10$bdcd6730$@gmail.com> References: <075a01d8267b$9499cd10$bdcd6730$@gmail.com> Message-ID: <005001d826a9$b4ad62a0$1e0827e0$@charter.net> Last email from Wendell, address sent on November 17, 2021 to the membership. wziegler at tds.net May have changed, I dunno. Bob R From: crw-talk On Behalf Of aaronagesicki at gmail.com Sent: Sunday, February 20, 2022 11:02 AM To: 'Membership mailing list for the AAW Chapter Coulee Region Woodturners.' Subject: [crw-talk] Contacts Earlier this morning I sent mail to all the members. I received Undeliverable notices for email to 3 members: Wendell Ziegler Larry McTaggart Marvin Meyer If anyone knows them and has their phone number, please contact them with this info. Aaron Gesicki 1317 Woodpark Road Winona, MN 55987 507-615-0233 home 303-551-2450 cell -------------- next part -------------- An HTML attachment was scrubbed... URL: From props at charter.net Sun Feb 20 16:42:51 2022 From: props at charter.net (props at charter.net) Date: Sun, 20 Feb 2022 16:42:51 -0600 Subject: [crw-talk] Looking for trees Message-ID: <000501d826ab$322d6ad0$96884070$@charter.net> Does anyone have any Hedge Apple Trees that they what to get rid of? Paul -------------- next part -------------- An HTML attachment was scrubbed... URL: From jerrymol at hotmail.com Sun Feb 20 16:54:44 2022 From: jerrymol at hotmail.com (Jerry Molnar) Date: Sun, 20 Feb 2022 22:54:44 +0000 Subject: [crw-talk] Contacts In-Reply-To: <075a01d8267b$9499cd10$bdcd6730$@gmail.com> References: <075a01d8267b$9499cd10$bdcd6730$@gmail.com> Message-ID: AAron, I received your message. On a somewhat related topic, would it be possible to obtain a list of member names, perhaps with their e-mails. The club has distributed lists of this nature over the years. Certainly helps when trying to remember names or to make a contact. I realize some members may not want this information shared, perhaps the Board could consider it. Thank you. Jerry Molnar ________________________________ From: crw-talk on behalf of aaronagesicki at gmail.com Sent: Sunday, February 20, 2022 11:02 AM To: 'Membership mailing list for the AAW Chapter Coulee Region Woodturners.' Subject: [crw-talk] Contacts Earlier this morning I sent mail to all the members. I received Undeliverable notices for email to 3 members: Wendell Ziegler Larry McTaggart Marvin Meyer If anyone knows them and has their phone number, please contact them with this info. Aaron Gesicki 1317 Woodpark Road Winona, MN 55987 507-615-0233 home 303-551-2450 cell -------------- next part -------------- An HTML attachment was scrubbed... URL: From aaronagesicki at gmail.com Sun Feb 20 17:26:52 2022 From: aaronagesicki at gmail.com (aaronagesicki at gmail.com) Date: Sun, 20 Feb 2022 17:26:52 -0600 Subject: [crw-talk] Contacts In-Reply-To: <005001d826a9$b4ad62a0$1e0827e0$@charter.net> References: <075a01d8267b$9499cd10$bdcd6730$@gmail.com> <005001d826a9$b4ad62a0$1e0827e0$@charter.net> Message-ID: <080601d826b1$58322da0$089688e0$@gmail.com> Just got a reply from Wendell. Don't know what happened, unless his server doesn't like attachments. Aaron Gesicki From: crw-talk On Behalf Of Bob Raasch Sent: Sunday, February 20, 2022 4:32 PM To: 'Membership mailing list for the AAW Chapter Coulee Region Woodturners.' Subject: Re: [crw-talk] Contacts Last email from Wendell, address sent on November 17, 2021 to the membership. wziegler at tds.net May have changed, I dunno. Bob R From: crw-talk > On Behalf Of aaronagesicki at gmail.com Sent: Sunday, February 20, 2022 11:02 AM To: 'Membership mailing list for the AAW Chapter Coulee Region Woodturners.' > Subject: [crw-talk] Contacts Earlier this morning I sent mail to all the members. I received Undeliverable notices for email to 3 members: Wendell Ziegler Larry McTaggart Marvin Meyer If anyone knows them and has their phone number, please contact them with this info. Aaron Gesicki 1317 Woodpark Road Winona, MN 55987 507-615-0233 home 303-551-2450 cell -------------- next part -------------- An HTML attachment was scrubbed... URL: From aaronagesicki at gmail.com Sun Feb 20 17:33:04 2022 From: aaronagesicki at gmail.com (aaronagesicki at gmail.com) Date: Sun, 20 Feb 2022 17:33:04 -0600 Subject: [crw-talk] Contacts In-Reply-To: References: <075a01d8267b$9499cd10$bdcd6730$@gmail.com> Message-ID: <082601d826b2$3584cf00$a08e6d00$@gmail.com> I have one. Need authorization to distribute. Use it to send the newsletter. Currently goes to 71 recipients. Aaron Gesicki From: crw-talk On Behalf Of Jerry Molnar Sent: Sunday, February 20, 2022 4:55 PM To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. Subject: Re: [crw-talk] Contacts AAron, I received your message. On a somewhat related topic, would it be possible to obtain a list of member names, perhaps with their e-mails. The club has distributed lists of this nature over the years. Certainly helps when trying to remember names or to make a contact. I realize some members may not want this information shared, perhaps the Board could consider it. Thank you. Jerry Molnar _____ From: crw-talk > on behalf of aaronagesicki at gmail.com > Sent: Sunday, February 20, 2022 11:02 AM To: 'Membership mailing list for the AAW Chapter Coulee Region Woodturners.' > Subject: [crw-talk] Contacts Earlier this morning I sent mail to all the members. I received Undeliverable notices for email to 3 members: Wendell Ziegler Larry McTaggart Marvin Meyer If anyone knows them and has their phone number, please contact them with this info. Aaron Gesicki 1317 Woodpark Road Winona, MN 55987 507-615-0233 home 303-551-2450 cell -------------- next part -------------- An HTML attachment was scrubbed... URL: From raaschb at charter.net Sun Feb 20 17:54:16 2022 From: raaschb at charter.net (Bob Raasch) Date: Sun, 20 Feb 2022 17:54:16 -0600 Subject: [crw-talk] Wigstand In-Reply-To: References: Message-ID: <009901d826b5$2bcde700$8369b500$@charter.net> Hello members, For those who were not able attend yesterday?s meeting, I collected 3 beautiful wig stands. One each from Bob Patros, Wendell Ziegler and Rich Eagan. I suspect pictures of those will be in the next newsletter along with the other instant gallery items. I will deliver those stands toward the end next week. To elaborate further on wig stands, most women cancer patients use wig stands to store their wigs, many of which are simply made of Styrofoam, commercially available, and are apparently handed out to patients. Young girls also get cancer, so there may be a need for them also. I will check the next time I see Taylor at Gundersen. The turned wig stands you?ve lovingly made thus far or are still planning to make are extremely well received by the patients that receive them. Rest assured, the patients are so appreciative that local artisans of the Coulee Region Woodturners are thinking of them in their time of need. I?m sure most of us have family members or friends, or know personally people who have cancer or have had cancer and lost their hair as the result of treatment. Hair loss for women and girls can be very difficult. The stands you make provide some level of comfort to those patients receiving them, knowing that we care. Many clubs across the country and probably the world participate in wig stand making as a club effort. The genesis of this club project? Some of you may remember that new member at the time, Pam Day, mentioned at our outdoor meeting last summer in Onalaska, that making wig stands for women could be a good community engagement opportunity for the club. I had completely forgotten about her suggestion. However, while I was undergoing radiation and chemo therapy myself at Gundersen last fall I recalled Pam?s comments. Checking with my cancer care team, I inquired if there may be a need for wig stands for patients seen there. The cancer center coordinator contacted me, and we had a discussion about the need. I suggested that our club may interested in a club project to help out. The rest is history! To dovetail on John?s comment, I know nothing about the Winona Health cancer center. If you desire your stand to go there, please contact John Griffiths or Aaron Gesicki. I?m sure there is a need at other centers too, however, I only have a relationship with the Gundersen Cancer Center, located in LaCrosse. I think another club member checked with Mayo at LaCrosse, I don?t believe they were interested?Will that person please correct me If I?m misinformed. Some AAW clubs make turned Beads of Courage (BOC) boxes for children undergoing medical treatment. As far I know, both local hospitals in LaCrosse do not participate the Beads of Courage national program. That does not mean we should not consider that opportunity. Many clubs or individual turners as you may be aware, simply make boxes, using the BOC guidelines, then ship the boxes to a participating children?s hospital. If interested, click on the this link for more information, Beads of Courage , www.beadsofcourage.org Sincerely, Bob Raasch From: crw-talk On Behalf Of John & Donna Griffiths Sent: Sunday, February 20, 2022 9:59 AM To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. Subject: Re: [crw-talk] Wigstand Andrew, and the CRW fellowship, I think it is ready for prime time. We will of course be collecting them again at the March meeting and In my opinion, a very wide range of design options is possible with them. Of course, if you are moved to keep perfecting your design, more power to you. Lots of people at the Gundersen and Winona Health cancer centers are in need of them; and we all know that we ourselves are the harshest critics of our work. So just keep making! And one other design matter, wig stands are a great way to use up those odd bits of wood we all have laying around on our shelves, under the benches, on the floor (Yup, that's me). So there is a ton of design freedom just built into the project. Another factor is that the users of wig stands tend to be older women who are less likely to have very long hair, so taller stands will benefit some ladies and shorter ones will be welcomed by others as I am guessing that women who need wigs during chemo are likely to wear wigs that more or less match their hair length from before treatment. John ------ Original Message ------ From: "Robert Patros" > To: "Membership mailing list for the AAW Chapter Coulee Region Woodturners." > Sent: 2/19/2022 6:33:26 PM Subject: Re: [crw-talk] Wigstand Very nice design, Andrew. Should be fine. Good job! Sent from my iPhone On Feb 19, 2022, at 4:35 PM, Andrew > wrote: ? Here's my first attempt. It's a bit top heavy. I'll have a go at another one. Andrew -------------- next part -------------- An HTML attachment was scrubbed... URL: From griff at mwt.net Mon Feb 21 10:32:32 2022 From: griff at mwt.net (John & Donna Griffiths) Date: Mon, 21 Feb 2022 16:32:32 +0000 Subject: [crw-talk] Looking for trees In-Reply-To: <000501d826ab$322d6ad0$96884070$@charter.net> References: <000501d826ab$322d6ad0$96884070$@charter.net> Message-ID: What, pray tell, are hedge apple trees? They must have some nice wood if you are wanting some. John ------ Original Message ------ From: props at charter.net To: "crw-talk" Sent: 2/20/2022 4:42:51 PM Subject: [crw-talk] Looking for trees >Does anyone have any Hedge Apple Trees that they what to get rid of? > > > >Paul > -------------- next part -------------- An HTML attachment was scrubbed... URL: From goeh at charter.net Mon Feb 21 10:37:26 2022 From: goeh at charter.net (goeh at charter.net) Date: Mon, 21 Feb 2022 16:37:26 +0000 Subject: [crw-talk] Looking for trees Message-ID: Also known as Osage Orange. I doubt you'll find any in Wisconsin. Illinois and Iowa have some. -----------------------------------------From: "John & Donna Griffiths" To: "Membership mailing list for the AAW Chapter Coulee Region Woodturners." Cc: Sent: Monday February 21 2022 9:32:57AM Subject: Re: [crw-talk] Looking for trees What, pray tell, are hedge apple trees? They must have some nice wood if you are wanting some. John ------ Original Message ------ From: props at charter.net To: "crw-talk" Sent: 2/20/2022 4:42:51 PM Subject: [crw-talk] Looking for trees Does anyone have any Hedge Apple Trees that they what to get rid of? Paul -------------- next part -------------- An HTML attachment was scrubbed... URL: From EganR at westerntc.edu Mon Feb 21 10:48:46 2022 From: EganR at westerntc.edu (Egan, Richard) Date: Mon, 21 Feb 2022 16:48:46 +0000 Subject: [crw-talk] Looking for trees In-Reply-To: References: Message-ID: I don?t think they survive this far north. My brother lives near Des Moines, and they have lots of them, but they don?t get the real below zero cold we do. The trees don?t seem to grow very large, like many apple trees, the have thorns and those gnarly yellow green fruits. The wood has a greenish color, with darker brown rings. It?s hard, but also seems prone to cracking. From: crw-talk On Behalf Of goeh at charter.net Sent: Monday, February 21, 2022 10:37 AM To: 'John & Donna Griffiths [griff at mwt.net], Membership mailing list for the AAW Chapter Coulee Region Woodturners.' Subject: Re: [crw-talk] Looking for trees CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe. Also known as Osage Orange. I doubt you'll find any in Wisconsin. Illinois and Iowa have some. ----------------------------------------- From: "John & Donna Griffiths" To: "Membership mailing list for the AAW Chapter Coulee Region Woodturners." Cc: Sent: Monday February 21 2022 9:32:57AM Subject: Re: [crw-talk] Looking for trees What, pray tell, are hedge apple trees? They must have some nice wood if you are wanting some. John ------ Original Message ------ From: props at charter.net To: "crw-talk" > Sent: 2/20/2022 4:42:51 PM Subject: [crw-talk] Looking for trees Does anyone have any Hedge Apple Trees that they what to get rid of? Paul -------------- next part -------------- An HTML attachment was scrubbed... URL: From rjpatros05 at gmail.com Mon Feb 21 11:55:40 2022 From: rjpatros05 at gmail.com (Robert Patros) Date: Mon, 21 Feb 2022 11:55:40 -0600 Subject: [crw-talk] Crack in handle Message-ID: <3CCF9181-0184-4AB2-954A-231F83B9B602@gmail.com> For all of my turning life, I have used the Ellsworth signature 1/2 inch bowl gouge. This probably is my 4th one. But never have I had one whereby the handle has cracked (as shown). The good news is that Brad, at Packard, contacted Crown and Crown agreed to replace it. Even though I purchased it in 2019, they felt the handle should not have behaved badly like that. It was great working with Brad. Packard and Crown are given excellent marks by me! -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_6644.jpg Type: image/jpeg Size: 1469200 bytes Desc: not available URL: -------------- next part -------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_6645.jpg Type: image/jpeg Size: 1303875 bytes Desc: not available URL: -------------- next part -------------- Sent from my iPhone From raaschb at charter.net Mon Feb 21 12:41:49 2022 From: raaschb at charter.net (Bob R) Date: Mon, 21 Feb 2022 12:41:49 -0600 Subject: [crw-talk] Crack in handle Message-ID: Bob, Now that's a wonderful example of exemplar service. I've never purchased from Packard but will check em out. I have a, maybe 3/4" Crown Ellsworth sig bowl gouge, purchased between 2009-2012? One of 1st tools I purchased. Didn't know a gouge from a scraper then.? Excellent shape, hardly any wear, mostly because I don't know to effectively sharpen to the Ellsworth grind. That tool is one BA tool, a beast!? Thanks for sharing your experience. Bob R, Sent from my Phone On Feb 21, 2022 11:55 AM, Robert Patros wrote: > > For all of my turning life, I have used the Ellsworth signature 1/2 inch bowl gouge. This probably is my 4th one. But never have I had one whereby the handle has cracked (as shown). > > The good news is that Brad, at Packard, contacted Crown and Crown agreed to replace it. Even though I purchased it in 2019, they felt the handle should not have behaved badly like that. > It was great working with Brad. Packard and Crown are given excellent marks by me! > > > > > > Sent from my iPhone > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ From props at charter.net Mon Feb 21 12:42:39 2022 From: props at charter.net (props at charter.net) Date: Mon, 21 Feb 2022 12:42:39 -0600 Subject: [crw-talk] Looking for trees In-Reply-To: References: Message-ID: <017a01d82752$cdde0230$699a0690$@charter.net> It is GREENISH YELLOW IN COLOR AND very HARD. I am thinking of using it in an accent ring in a bowl. Paul From: crw-talk On Behalf Of goeh at charter.net Sent: Monday, February 21, 2022 10:37 AM To: 'John & Donna Griffiths [griff at mwt.net], Membership mailing list for the AAW Chapter Coulee Region Woodturners.' Subject: Re: [crw-talk] Looking for trees Also known as Osage Orange. I doubt you'll find any in Wisconsin. Illinois and Iowa have some. ----------------------------------------- From: "John & Donna Griffiths" To: "Membership mailing list for the AAW Chapter Coulee Region Woodturners." Cc: Sent: Monday February 21 2022 9:32:57AM Subject: Re: [crw-talk] Looking for trees What, pray tell, are hedge apple trees? They must have some nice wood if you are wanting some. John ------ Original Message ------ From: props at charter.net To: "crw-talk" > Sent: 2/20/2022 4:42:51 PM Subject: [crw-talk] Looking for trees Does anyone have any Hedge Apple Trees that they what to get rid of? Paul -------------- next part -------------- An HTML attachment was scrubbed... URL: From rjpatros05 at gmail.com Mon Feb 21 12:49:06 2022 From: rjpatros05 at gmail.com (Robert Patros) Date: Mon, 21 Feb 2022 12:49:06 -0600 Subject: [crw-talk] Crack in handle In-Reply-To: <6213dd18.1c69fb81.55831.e2d2SMTPIN_ADDED_MISSING@mx.google.com> References: <6213dd18.1c69fb81.55831.e2d2SMTPIN_ADDED_MISSING@mx.google.com> Message-ID: <1B560A35-28D8-4820-93BF-748187FFB8D3@gmail.com> Bob, I?ve used Packard consistently over the years. They have been great! Bob Sent from my iPhone > On Feb 21, 2022, at 12:42 PM, Bob R wrote: > > ?Bob, > Now that's a wonderful example of exemplar service. I've never purchased from Packard but will check em out. I have a, maybe 3/4" Crown Ellsworth sig bowl gouge, purchased between 2009-2012? One of 1st tools I purchased. Didn't know a gouge from a scraper then. Excellent shape, hardly any wear, mostly because I don't know to effectively sharpen to the Ellsworth grind. That tool is one BA tool, a beast! > Thanks for sharing your experience. > > Bob R, Sent from my Phone >> On Feb 21, 2022 11:55 AM, Robert Patros wrote: >> >> For all of my turning life, I have used the Ellsworth signature 1/2 inch bowl gouge. This probably is my 4th one. But never have I had one whereby the handle has cracked (as shown). >> >> The good news is that Brad, at Packard, contacted Crown and Crown agreed to replace it. Even though I purchased it in 2019, they felt the handle should not have behaved badly like that. >> It was great working with Brad. Packard and Crown are given excellent marks by me! >> >> >> >> >> >> Sent from my iPhone >> _________________________________________ >> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >> ______ >> crw-talk mailing list >> crw-talk at crwoodturner.com >> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ From EganR at westerntc.edu Mon Feb 21 12:50:20 2022 From: EganR at westerntc.edu (Egan, Richard) Date: Mon, 21 Feb 2022 18:50:20 +0000 Subject: [crw-talk] Crack in handle In-Reply-To: <3CCF9181-0184-4AB2-954A-231F83B9B602@gmail.com> References: <3CCF9181-0184-4AB2-954A-231F83B9B602@gmail.com> Message-ID: Wonderful they are willing to replace that. You can knock that handle off and turn a new one and you're back in business! From: crw-talk On Behalf Of Robert Patros Sent: Monday, February 21, 2022 11:56 AM To: crw-talk at crwoodturner.com Subject: [crw-talk] Crack in handle CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe. For all of my turning life, I have used the Ellsworth signature 1/2 inch bowl gouge. This probably is my 4th one. But never have I had one whereby the handle has cracked (as shown). The good news is that Brad, at Packard, contacted Crown and Crown agreed to replace it. Even though I purchased it in 2019, they felt the handle should not have behaved badly like that. It was great working with Brad. Packard and Crown are given excellent marks by me! [cid:image001.jpg at 01D82721.94944A60] [cid:image002.jpg at 01D82721.94944A60] Sent from my iPhone _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image001.jpg Type: image/jpeg Size: 1760214 bytes Desc: image001.jpg URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: image002.jpg Type: image/jpeg Size: 1548719 bytes Desc: image002.jpg URL: From mogoldfish at yahoo.com Mon Feb 21 12:59:12 2022 From: mogoldfish at yahoo.com (Kristine Clough) Date: Mon, 21 Feb 2022 18:59:12 +0000 (UTC) Subject: [crw-talk] Crack in handle In-Reply-To: References: <3CCF9181-0184-4AB2-954A-231F83B9B602@gmail.com> Message-ID: <1049662086.544181.1645469952928@mail.yahoo.com> That would be the reason for ferrules. Kris Sent from Yahoo Mail on Android On Mon, Feb 21, 2022 at 12:50 PM, Egan, Richard wrote: _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From varum527 at hotmail.com Mon Feb 21 13:02:59 2022 From: varum527 at hotmail.com (Virginia Green) Date: Mon, 21 Feb 2022 13:02:59 -0600 Subject: [crw-talk] Wigstand In-Reply-To: <009901d826b5$2bcde700$8369b500$@charter.net> References: <009901d826b5$2bcde700$8369b500$@charter.net> Message-ID: I spoke with Sandy GruszynskiRN . She Manages all of the patients that we treat for cancer at Winona Health. She thinks that they could definitely use some stands although we don?t treat a lot of cancer here. She also brought up individuals with alopecia who have to wear wigs. I would be happy to bring them to Winona especially as her office is just down the hall from mine. Virginia Sent from my iPhone > On Feb 20, 2022, at 5:54 PM, Bob Raasch wrote: > > ? > Hello members, > For those who were not able attend yesterday?s meeting, I collected 3 beautiful wig stands. One each from Bob Patros, Wendell Ziegler and Rich Eagan. I suspect pictures of those will be in the next newsletter along with the other instant gallery items. I will deliver those stands toward the end next week. > > To elaborate further on wig stands, most women cancer patients use wig stands to store their wigs, many of which are simply made of Styrofoam, commercially available, and are apparently handed out to patients. Young girls also get cancer, so there may be a need for them also. I will check the next time I see Taylor at Gundersen. The turned wig stands you?ve lovingly made thus far or are still planning to make are extremely well received by the patients that receive them. Rest assured, the patients are so appreciative that local artisans of the Coulee Region Woodturners are thinking of them in their time of need. I?m sure most of us have family members or friends, or know personally people who have cancer or have had cancer and lost their hair as the result of treatment. Hair loss for women and girls can be very difficult. The stands you make provide some level of comfort to those patients receiving them, knowing that we care. Many clubs across the country and probably the world participate in wig stand making as a club effort. > > The genesis of this club project? Some of you may remember that new member at the time, Pam Day, mentioned at our outdoor meeting last summer in Onalaska, that making wig stands for women could be a good community engagement opportunity for the club. I had completely forgotten about her suggestion. However, while I was undergoing radiation and chemo therapy myself at Gundersen last fall I recalled Pam?s comments. Checking with my cancer care team, I inquired if there may be a need for wig stands for patients seen there. The cancer center coordinator contacted me, and we had a discussion about the need. I suggested that our club may interested in a club project to help out. The rest is history! > > To dovetail on John?s comment, I know nothing about the Winona Health cancer center. If you desire your stand to go there, please contact John Griffiths or Aaron Gesicki. I?m sure there is a need at other centers too, however, I only have a relationship with the Gundersen Cancer Center, located in LaCrosse. I think another club member checked with Mayo at LaCrosse, I don?t believe they were interested?Will that person please correct me If I?m misinformed. > > Some AAW clubs make turned Beads of Courage (BOC) boxes for children undergoing medical treatment. As far I know, both local hospitals in LaCrosse do not participate the Beads of Courage national program. That does not mean we should not consider that opportunity. Many clubs or individual turners as you may be aware, simply make boxes, using the BOC guidelines, then ship the boxes to a participating children?s hospital. If interested, click on the this link for more information, Beads of Courage, www.beadsofcourage.org > > Sincerely, Bob Raasch > > > From: crw-talk On Behalf Of John & Donna Griffiths > Sent: Sunday, February 20, 2022 9:59 AM > To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. > Subject: Re: [crw-talk] Wigstand > > Andrew, and the CRW fellowship, > > I think it is ready for prime time. We will of course be collecting them again at the March meeting and In my opinion, a very wide range of design options is possible with them. Of course, if you are moved to keep perfecting your design, more power to you. Lots of people at the Gundersen and Winona Health cancer centers are in need of them; and we all know that we ourselves are the harshest critics of our work. So just keep making! > > And one other design matter, wig stands are a great way to use up those odd bits of wood we all have laying around on our shelves, under the benches, on the floor (Yup, that's me). So there is a ton of design freedom just built into the project. Another factor is that the users of wig stands tend to be older women who are less likely to have very long hair, so taller stands will benefit some ladies and shorter ones will be welcomed by others as I am guessing that women who need wigs during chemo are likely to wear wigs that more or less match their hair length from before treatment. > > John > > ------ Original Message ------ > From: "Robert Patros" > To: "Membership mailing list for the AAW Chapter Coulee Region Woodturners." > Sent: 2/19/2022 6:33:26 PM > Subject: Re: [crw-talk] Wigstand > > Very nice design, Andrew. Should be fine. Good job! > > Sent from my iPhone > > On Feb 19, 2022, at 4:35 PM, Andrew wrote: > > ? > Here's my first attempt. It's a bit top heavy. I'll have a go at another one. > > Andrew > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From raaschb at charter.net Mon Feb 21 13:28:29 2022 From: raaschb at charter.net (Bob R) Date: Mon, 21 Feb 2022 13:28:29 -0600 Subject: [crw-talk] Wigstand Message-ID: Virginia and all, That's great news. We are after all, the Coulee Region Woodturners, reaching out seems like a wonderful idea to me. Maybe going forward, as a suggestion to the membership, if you want your wig stands to go to Winona Health, please identify on your stand in some fashion as such & contact Virginia directly. For general info, "alopecia" simply refers to hair loss, can be due to a variety of causes.b Thanks Virginia for your suggestion & willingness to deliver to WH. Bob Raasch, Sent from my Phone On Feb 21, 2022 1:02 PM, Virginia Green wrote: > > I spoke with Sandy GruszynskiRN . She Manages all of the patients that we treat for cancer at Winona Health. She thinks that they could definitely use some stands although we don?t treat a lot of cancer here. She also brought up individuals with alopecia who have to wear wigs. I would be happy to bring them to Winona especially as her office is just down the hall from mine. > Virginia > > Sent from my iPhone > >> On Feb 20, 2022, at 5:54 PM, Bob Raasch wrote: >> >> ? > > Hello members, > > For those who were not able attend yesterday?s meeting, I collected 3 beautiful wig stands. One each from Bob Patros, Wendell Ziegler and Rich Eagan. I suspect pictures of those will be in the next newsletter along with the other instant gallery items. I will deliver those stands toward the end next week. > > To elaborate further on wig stands, most women cancer patients use wig stands to store their wigs, many of which are simply made of Styrofoam, commercially available, and are apparently handed out to patients. Young girls also get cancer, so there may be a need for them also. I will check the next time I see Taylor at Gundersen. The turned wig stands you?ve lovingly made thus far or are still planning to make are extremely well received by the patients that receive them. Rest assured, the patients are so appreciative that local artisans of the Coulee Region Woodturners are thinking of them in their time of need. I?m sure most of us have family members or friends, or know personally people who have cancer or have had cancer and lost their hair as the result of treatment. Hair loss for women and girls can be very difficult. The stands you make provide some level of comfort to those patients receiving them, knowing that we care. Many clubs across the country and probably the world participate in wig stand making as a club effort. > > The genesis of this club project? Some of you may remember that new member at the time, Pam Day, mentioned at our outdoor meeting last summer in Onalaska, that making wig stands for women could be a good community engagement opportunity for the club. I had completely forgotten about her suggestion. However, while I was undergoing radiation and chemo therapy myself at Gundersen last fall I recalled Pam?s comments. Checking with my cancer care team, I inquired if there may be a need for wig stands for patients seen there. The cancer center coordinator contacted me, and we had a discussion about the need. I suggested that our club may interested in a club project to help out. The rest is history! > > To dovetail on John?s comment, I know nothing about the Winona Health cancer center. If you desire your stand to go there, please contact John Griffiths or Aaron Gesicki. I?m sure there is a need at other centers too, however, I only have a relationship with the Gundersen Cancer Center, located in LaCrosse. I think another club member checked with Mayo at LaCrosse, I don?t believe they were interested?Will that person please correct me If I?m misinformed. > > Some AAW clubs make turned Beads of Courage (BOC) boxes for children undergoing medical treatment. As far I know, both local hospitals in LaCrosse do not participate the Beads of Courage national program. That does not mean we should not consider that opportunity. Many clubs or individual turners as you may be aware, simply make boxes, using the BOC guidelines, then ship the boxes to a participating children?s hospital. If interested, click on the this link for more information, Beads of Courage, www.beadsofcourage.org > > Sincerely, Bob Raasch > > From: crw-talk On Behalf Of John & Donna Griffiths > Sent: Sunday, February 20, 2022 9:59 AM > To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. > Subject: Re: [crw-talk] Wigstand > > Andrew, and the CRW fellowship, > > I think it is ready for prime time. We will of course be collecting them again at the March meeting and In my opinion, a very wide range of design options is possible with them. Of course, if you are moved to keep perfecting your design, more power to you. Lots of people at the Gundersen and Winona Health cancer centers are in need of them; and we all know that we ourselves are the harshest critics of our work. So just keep making! > > And one other design matter, wig stands are a great way to use up those odd bits of wood we all have laying around on our shelves, under the benches, on the floor (Yup, that's me). So there is a ton of design freedom just built into the project. Another factor is that the users of wig stands tend to be older women who are less likely to have very long hair, so taller stands will benefit some ladies and shorter ones will be welcomed by others as I am guessing that women who need wigs during chemo are likely to wear wigs that more or less match their hair length from before treatment. > > John > > ------ Original Message ------ > > From: "Robert Patros" > > To: "Membership mailing list for the AAW Chapter Coulee Region Woodturners." > > Sent: 2/19/2022 6:33:26 PM > > Subject: Re: [crw-talk] Wigstand >> >> Very nice design, Andrew. Should be fine. Good job! >> >> Sent from my iPhone >>> >>> On Feb 19, 2022, at 4:35 PM, Andrew wrote: >>> >>> ? >>> >>> Here's my first attempt. It's a bit top heavy. I'll have a go at another one. >>> >>> Andrew > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From llswigg at mwt.net Mon Feb 21 15:42:20 2022 From: llswigg at mwt.net (Lavonne Swiggum) Date: Mon, 21 Feb 2022 15:42:20 -0600 Subject: [crw-talk] Looking for trees In-Reply-To: <000501d826ab$322d6ad0$96884070$@charter.net> References: <000501d826ab$322d6ad0$96884070$@charter.net> Message-ID: Hedge Apple trees is another name for Osage Orange. > On Feb 20, 2022, at 4:42 PM, props at charter.net wrote: > > Does anyone have any Hedge Apple Trees that they what to get rid of? > > Paul > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From props at charter.net Mon Feb 21 15:49:15 2022 From: props at charter.net (props at charter.net) Date: Mon, 21 Feb 2022 15:49:15 -0600 Subject: [crw-talk] Looking for trees In-Reply-To: References: <000501d826ab$322d6ad0$96884070$@charter.net> Message-ID: <001701d8276c$df4630a0$9dd291e0$@charter.net> thanks From: crw-talk On Behalf Of Lavonne Swiggum Sent: Monday, February 21, 2022 3:42 PM To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. Subject: Re: [crw-talk] Looking for trees Hedge Apple trees is another name for Osage Orange. On Feb 20, 2022, at 4:42 PM, props at charter.net wrote: Does anyone have any Hedge Apple Trees that they what to get rid of? Paul _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From rjpatros05 at gmail.com Mon Feb 28 08:31:08 2022 From: rjpatros05 at gmail.com (Robert Patros) Date: Mon, 28 Feb 2022 08:31:08 -0600 Subject: [crw-talk] Fwd: AAW Regional Notice: Turn-On! Chicago, July 29-31, 2022 References: <5055736046.1@informz.net> Message-ID: I attended in 2011. Excellent program at the time. Sent from my iPhone Begin forwarded message: > From: American Association of Woodturners > Date: February 28, 2022 at 8:05:27 AM CST > To: rjpatros05 at gmail.com > Subject: AAW Regional Notice: Turn-On! Chicago, July 29-31, 2022 > Reply-To: memberservices at woodturner.org > > ? > > > > Hello Bob! > > Chicago Woodturners present > > > > Woodturning Symposium > July 29-31, 2022 > Northbrook, IL > > The Chicago Woodturners are happy to invite you to join us once again for Turn On! Chicago 2022. We are looking forward to welcoming you to our new venue: the newly remodeled Crowne Plaza Chicago-Northbrook conference center and hotel. Located just 15 minutes from O?Hare International Airport in Chicago?s northern suburbs. > > > > > > Turn On! Chicago has been described by previous attendees as ?the Midwest?s premier Woodturning symposium." Come and participate in 3 days of total immersion into woodturning as you learn from our outstanding line up of world-renowned woodturning demonstrators. Whether you are just beginning your woodturning journey or have years of experience, there is always something to gain from attending an event like this. Register TODAY! www.turnonchicago.com > > > > > > Featured Demonstrators: Andy Cole, Cynthia Carden, Beth Ireland, Eric Lofstrom, Avelino Samuel, and Jacques Vesery. > > > > > > Regional Demonstrators: Marie Anderson, Roberto Ferrer, Keith Lackner, Clint Stevens, Doug Thompson, and Rob Wallace. > > > > > > Friday evening there will be a hands-on Pens for Troops event, a Women in Turning meeting, and we will be collecting Beads of Courage Boxes for Lurie Children?s Hospital. Don?t forget you can spend time visiting some of our many vendors in the trade show. Maybe just enjoy socializing with fellow woodturners! > > > > > > > > Don?t wait! Registration is now OPEN! Visit www.turnonchicago.com to register for Turn On! Chicago and link to the hotel for discounted group rates for the symposium. New for 2022, as we encourage the next generation of youth to pursue woodturning, we are offering discounted youth pricing for anyone under the age of 21. > > Hey, why not make an entire vacation out of your visit? Bring your spouse! July is the perfect time to visit Chicago. There is plenty of food and activities for everyone. Sign up for Turn On! Chicago today! > > Questions or to register please visit www.turnonchicago.com. > > The Chicago Woodturners club is a 501c3 non-profit organization dedicated to teaching and promoting the art and craft of woodturning to all interested persons. > > > > > > > > > > > > > > > > > > > > > > > > American Association of Woodturners > 222 Landmark Center > 75 5th St W, St. Paul, MN 55102-7704 > 877-595-9094 | 651-484-9094 | Website > > Memberservices at woodturner.org | Unsubscribe > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From rjpatros05 at gmail.com Mon Feb 28 10:40:19 2022 From: rjpatros05 at gmail.com (Robert Patros) Date: Mon, 28 Feb 2022 10:40:19 -0600 Subject: [crw-talk] Jointer for sale Message-ID: <5D483A14-DCDF-45C0-8A70-B8944ED094FF@gmail.com> Old 4? Sears Jointer (saw horses not included) I bought for $20. Will sell for $20. -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_6695.jpg Type: image/jpeg Size: 1854371 bytes Desc: not available URL: -------------- next part -------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_6694.jpg Type: image/jpeg Size: 2096864 bytes Desc: not available URL: -------------- next part -------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_6692.jpg Type: image/jpeg Size: 2263707 bytes Desc: not available URL: -------------- next part -------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_6690.jpg Type: image/jpeg Size: 2376624 bytes Desc: not available URL: -------------- next part -------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_6689.jpg Type: image/jpeg Size: 1835479 bytes Desc: not available URL: -------------- next part -------------- Sent from my iPhone From griff at mwt.net Mon Feb 28 11:15:35 2022 From: griff at mwt.net (John & Donna Griffiths) Date: Mon, 28 Feb 2022 17:15:35 +0000 Subject: [crw-talk] Fwd: AAW Regional Notice: Turn-On! Chicago, July 29-31, 2022 In-Reply-To: References: <5055736046.1@informz.net> Message-ID: I just might be interested in going to it with another member or three. Holler back at me if interested. Chattanooga for the AAW symposium is a pretty darn far drive. ------ Original Message ------ From: "Robert Patros" To: crw-talk at crwoodturner.com Sent: 2/28/2022 8:31:08 AM Subject: [crw-talk] Fwd: AAW Regional Notice: Turn-On! Chicago, July 29-31, 2022 >I attended in 2011. Excellent program at the time. > >Sent from my iPhone > >Begin forwarded message: > >>From: American Association of Woodturners >> >>Date: February 28, 2022 at 8:05:27 AM CST >>To:rjpatros05 at gmail.com >>Subject:AAW Regional Notice: Turn-On! Chicago, July 29-31, 2022 >>Reply-To:memberservices at woodturner.org >> >>? AAW Regional Notice: Turn-On! Chicago, July 29-31, 2022 >> >> >>American Association of Woodturners >> >> Hello Bob! >> >> >>Chicago Woodturners present >> >>Turn-On! Chicago >> >>Woodturning Symposium >> >>July 29-31, 2022 >> >>Northbrook, IL >> >> >> >>The Chicago Woodturners are happy to invite you to join us once again >>for Turn On! Chicago 2022. We are looking forward to welcoming you to >>our new venue: the newly remodeled Crowne Plaza Chicago-Northbrook >>conference center and hotel. Located just 15 minutes from O?Hare >>International Airport in Chicago?s northern suburbs. >> >> >> >>Turn-On! Chicago >> >> >> >>Turn On! Chicago has been described by previous attendees as ?the >>Midwest?s premier Woodturning symposium."Come and participate in 3 >>days of total immersion into woodturning as you learn from our >>outstanding line up of world-renowned woodturning demonstrators. >>Whether you are just beginning your woodturning journey or have years >>of experience, there is always something to gain from attending an >>event like this. Register TODAY! www.turnonchicago.com >> >> >> >> >>Turn-On! Chicago >> >> >> >>Featured Demonstrators: Andy Cole, Cynthia Carden, Beth Ireland, Eric >>Lofstrom, Avelino Samuel, and Jacques Vesery. >> >> >> >>Turn-On! Chicago >> >> >> >>Regional Demonstrators: Marie Anderson, Roberto Ferrer, Keith Lackner, >>Clint Stevens, Doug Thompson, and Rob Wallace. >> >> >> >>Turn-On! Chicago >> >> >> >>Friday evening there will be a hands-on Pens for Troops event, a Women >>in Turning meeting, and we will be collecting Beads of Courage Boxes >>for Lurie Children?s Hospital. Don?t forget you can spend time >>visiting some of our many vendors in the trade show. Maybe just enjoy >>socializing with fellow woodturners! >> >> >> >>Turn-On! Chicago >> >> >> >>Turn-On! Chicago >> >>Don?t wait! Registration is now OPEN!Visit www.turnonchicago.com >> >>to register for Turn On! Chicago and link to the hotel for discounted >>group rates for the symposium. New for 2022, as we encourage the next >>generation of youth to pursue woodturning, we are offering discounted >>youth pricing for anyone under the age of 21. >> >> >> >>Hey, why not make an entire vacation out of your visit? Bring your >>spouse! July is the perfect time to visit Chicago. There is plenty of >>food and activities for everyone. Sign up for Turn On! Chicago today! >> >> >> >>Questions or to register please visit www.turnonchicago.com >>. >> >> >> >>The Chicago Woodturners club is a 501c3 non-profit organization >>dedicated to teaching and promoting the art and craft of woodturning >>to all interested persons. >> >> >> >> >> >> >> >> >> >> >> >>facebook >> >>twitter >> >>youtube >> >>instagram >> >>American Association of Woodturners >> >>222 Landmark Center >> >>75 5th St W, St. Paul, MN 55102-7704 >> >>877-595-9094 | 651-484-9094 | Website >> >> >> >> >>Memberservices at woodturner.or g | >>Unsubscribe >> >> >> >> >> >> >>Higher Logic >> -------------- next part -------------- An HTML attachment was scrubbed... URL: From aaronagesicki at gmail.com Mon Feb 28 19:05:59 2022 From: aaronagesicki at gmail.com (aaronagesicki at gmail.com) Date: Mon, 28 Feb 2022 19:05:59 -0600 Subject: [crw-talk] Fwd: AAW Regional Notice: Turn-On! Chicago, July 29-31, 2022 In-Reply-To: References: <5055736046.1@informz.net> Message-ID: <023a01d82d08$84269920$8c73cb60$@gmail.com> Jacques Vesery is on the program. He is one creative guy. His partnered work has raised many thousands for AAW through the Annual Symposium auction. Amazing stuff. Aaron Gesicki From: crw-talk On Behalf Of Robert Patros Sent: Monday, February 28, 2022 8:31 AM To: crw-talk at crwoodturner.com Subject: [crw-talk] Fwd: AAW Regional Notice: Turn-On! Chicago, July 29-31, 2022 I attended in 2011. Excellent program at the time. Sent from my iPhone Begin forwarded message: From: American Association of Woodturners > Date: February 28, 2022 at 8:05:27 AM CST To: rjpatros05 at gmail.com Subject: AAW Regional Notice: Turn-On! Chicago, July 29-31, 2022 Reply-To: memberservices at woodturner.org ? Hello Bob! Chicago Woodturners present Woodturning Symposium July 29-31, 2022 Northbrook, IL The Chicago Woodturners are happy to invite you to join us once again for Turn On! Chicago 2022. We are looking forward to welcoming you to our new venue: the newly remodeled Crowne Plaza Chicago-Northbrook conference center and hotel. Located just 15 minutes from O?Hare International Airport in Chicago?s northern suburbs. Turn On! Chicago has been described by previous attendees as ?the Midwest?s premier Woodturning symposium." Come and participate in 3 days of total immersion into woodturning as you learn from our outstanding line up of world-renowned woodturning demonstrators. Whether you are just beginning your woodturning journey or have years of experience, there is always something to gain from attending an event like this. Register TODAY! www.turnonchicago.com Featured Demonstrators: Andy Cole, Cynthia Carden, Beth Ireland, Eric Lofstrom, Avelino Samuel, and Jacques Vesery. Regional Demonstrators: Marie Anderson, Roberto Ferrer, Keith Lackner, Clint Stevens, Doug Thompson, and Rob Wallace. Friday evening there will be a hands-on Pens for Troops event, a Women in Turning meeting, and we will be collecting Beads of Courage Boxes for Lurie Children?s Hospital. Don?t forget you can spend time visiting some of our many vendors in the trade show. Maybe just enjoy socializing with fellow woodturners! Don?t wait! Registration is now OPEN! Visit www.turnonchicago.com to register for Turn On! Chicago and link to the hotel for discounted group rates for the symposium. New for 2022, as we encourage the next generation of youth to pursue woodturning, we are offering discounted youth pricing for anyone under the age of 21. Hey, why not make an entire vacation out of your visit? Bring your spouse! July is the perfect time to visit Chicago. There is plenty of food and activities for everyone. Sign up for Turn On! Chicago today! Questions or to register please visit www.turnonchicago.com. The Chicago Woodturners club is a 501c3 non-profit organization dedicated to teaching and promoting the art and craft of woodturning to all interested persons. American Association of Woodturners 222 Landmark Center 75 5th St W, St. Paul, MN 55102-7704 877-595-9094 | 651-484-9094 | Website Memberservices at woodturner.org | Unsubscribe -------------- next part -------------- An HTML attachment was scrubbed... URL: From aaronagesicki at gmail.com Mon Feb 28 19:19:04 2022 From: aaronagesicki at gmail.com (aaronagesicki at gmail.com) Date: Mon, 28 Feb 2022 19:19:04 -0600 Subject: [crw-talk] Fwd: AAW Regional Notice: Turn-On! Chicago, July 29-31, 2022 In-Reply-To: References: <5055736046.1@informz.net> Message-ID: <029401d82d0a$57af0380$070d0a80$@gmail.com> If anyone is considering Chattanooga, I can vouch for the program and the city. Lived just up the road for a few years. Downtown area is renovated and safe. The Tennessee Aquarium, minor league baseball, the Riverwalk and Bridges, the Hunter Museum, and Sugar?s Ribs on Lookout Mtn. As is obvious, I?m thinking about it. Aaron Gesicki From: crw-talk On Behalf Of John & Donna Griffiths Sent: Monday, February 28, 2022 11:16 AM To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. Subject: Re: [crw-talk] Fwd: AAW Regional Notice: Turn-On! Chicago, July 29-31, 2022 I just might be interested in going to it with another member or three. Holler back at me if interested. Chattanooga for the AAW symposium is a pretty darn far drive. ------ Original Message ------ From: "Robert Patros" > To: crw-talk at crwoodturner.com Sent: 2/28/2022 8:31:08 AM Subject: [crw-talk] Fwd: AAW Regional Notice: Turn-On! Chicago, July 29-31, 2022 I attended in 2011. Excellent program at the time. Sent from my iPhone Begin forwarded message: From: American Association of Woodturners > Date: February 28, 2022 at 8:05:27 AM CST To: rjpatros05 at gmail.com Subject: AAW Regional Notice: Turn-On! Chicago, July 29-31, 2022 Reply-To: memberservices at woodturner.org ? Hello Bob! Chicago Woodturners present Woodturning Symposium July 29-31, 2022 Northbrook, IL The Chicago Woodturners are happy to invite you to join us once again for Turn On! Chicago 2022. We are looking forward to welcoming you to our new venue: the newly remodeled Crowne Plaza Chicago-Northbrook conference center and hotel. Located just 15 minutes from O?Hare International Airport in Chicago?s northern suburbs. Turn On! Chicago has been described by previous attendees as ?the Midwest?s premier Woodturning symposium." Come and participate in 3 days of total immersion into woodturning as you learn from our outstanding line up of world-renowned woodturning demonstrators. Whether you are just beginning your woodturning journey or have years of experience, there is always something to gain from attending an event like this. Register TODAY! www.turnonchicago.com Featured Demonstrators: Andy Cole, Cynthia Carden, Beth Ireland, Eric Lofstrom, Avelino Samuel, and Jacques Vesery. Regional Demonstrators: Marie Anderson, Roberto Ferrer, Keith Lackner, Clint Stevens, Doug Thompson, and Rob Wallace. Friday evening there will be a hands-on Pens for Troops event, a Women in Turning meeting, and we will be collecting Beads of Courage Boxes for Lurie Children?s Hospital. Don?t forget you can spend time visiting some of our many vendors in the trade show. Maybe just enjoy socializing with fellow woodturners! Don?t wait! Registration is now OPEN! Visit www.turnonchicago.com to register for Turn On! Chicago and link to the hotel for discounted group rates for the symposium. New for 2022, as we encourage the next generation of youth to pursue woodturning, we are offering discounted youth pricing for anyone under the age of 21. Hey, why not make an entire vacation out of your visit? Bring your spouse! July is the perfect time to visit Chicago. There is plenty of food and activities for everyone. Sign up for Turn On! Chicago today! Questions or to register please visit www.turnonchicago.com. The Chicago Woodturners club is a 501c3 non-profit organization dedicated to teaching and promoting the art and craft of woodturning to all interested persons. American Association of Woodturners 222 Landmark Center 75 5th St W, St. Paul, MN 55102-7704 877-595-9094 | 651-484-9094 | Website Memberservices at woodturner.org | Unsubscribe -------------- next part -------------- An HTML attachment was scrubbed... URL: