From marine9096 at gmail.com  Tue Aug  2 15:05:13 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Tue, 2 Aug 2022 15:05:13 -0500
Subject: [crw-talk] Board Meeting
Message-ID: <CAGK6+hCcLyuRcmeyXmkbOthGoMtRODhNArLxBuGbe3k4GCStTA@mail.gmail.com>

Will Thursday at 730 pm work?

-- 
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220802/3c0533c7/attachment.html>

From marine9096 at gmail.com  Tue Aug  2 15:15:20 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Tue, 2 Aug 2022 15:15:20 -0500
Subject: [crw-talk] Finish the move
Message-ID: <CAGK6+hAjYmJfPUiCithbyUD-f8PdE1i344j+w-oO7OpLxDw2cQ@mail.gmail.com>

Good afternoon, once again thanks to everyone that showed up to help move
from the community center.
Our next step is to set up an evening or day meeting to install the caging
and then get everything put away.
I would be open to an evening during the week or a weekend.

I will have some tools and we will have to get some fasteners. Other tools
would be helpful.

In Service

-- 
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220802/a0a25321/attachment.html>

From griff at mwt.net  Tue Aug  2 15:15:38 2022
From: griff at mwt.net (Mwt)
Date: Tue, 2 Aug 2022 15:15:38 -0500
Subject: [crw-talk] Board Meeting
In-Reply-To: <CAGK6+hCcLyuRcmeyXmkbOthGoMtRODhNArLxBuGbe3k4GCStTA@mail.gmail.com>
References: <CAGK6+hCcLyuRcmeyXmkbOthGoMtRODhNArLxBuGbe3k4GCStTA@mail.gmail.com>
Message-ID: <F9DBC837-0E36-45DE-948C-D2676B9AB0CA@mwt.net>

Yup, it will work for me. John

Sent from my iPhone

> On Aug 2, 2022, at 3:05 PM, James Bloomer <marine9096 at gmail.com> wrote:
> 
> ?
> Will Thursday at 730 pm work? 
> 
> -- 
> James A. Bloomer
>  
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/



From wisawdust at charter.net  Tue Aug  2 15:21:02 2022
From: wisawdust at charter.net (wisawdust)
Date: Tue, 02 Aug 2022 15:21:02 -0500
Subject: [crw-talk] Finish the move
In-Reply-To: <CAGK6+hAjYmJfPUiCithbyUD-f8PdE1i344j+w-oO7OpLxDw2cQ@mail.gmail.com>
Message-ID: <mailman.8.1659471677.364354.crw-talk_crwoodturner.com@crwoodturner.com>

Let me know date and timeSent from my Galaxy
-------- Original message --------From: James Bloomer <marine9096 at gmail.com> Date: 8/2/22  3:15 PM  (GMT-06:00) To: CRW talk <crw-talk at crwoodturner.com> Subject: [crw-talk] Finish the move Good afternoon, once again?thanks to everyone that showed up to help move from the community center.?Our next step is to set up an evening or day meeting to install the caging and then get everything put away.??I would be open to an evening during the week or a weekend.?I will have some tools and we will have to get some fasteners. Other tools would be helpful.?In Service-- James A. Bloomer
?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220802/4fabc1a6/attachment.html>

From rjpatros05 at gmail.com  Tue Aug  2 15:27:48 2022
From: rjpatros05 at gmail.com (Robert Patros)
Date: Tue, 2 Aug 2022 15:27:48 -0500
Subject: [crw-talk] Finish the move
In-Reply-To: <CAGK6+hAjYmJfPUiCithbyUD-f8PdE1i344j+w-oO7OpLxDw2cQ@mail.gmail.com>
References: <CAGK6+hAjYmJfPUiCithbyUD-f8PdE1i344j+w-oO7OpLxDw2cQ@mail.gmail.com>
Message-ID: <DD5A3C59-80AC-4F13-9018-4DFCFA613A36@gmail.com>

Just a question. Is the school secure enough that we may not need a cage? 

Sent from my iPhone

> On Aug 2, 2022, at 3:15 PM, James Bloomer <marine9096 at gmail.com> wrote:
> 
> ?
> Good afternoon, once again thanks to everyone that showed up to help move from the community center. 
> Our next step is to set up an evening or day meeting to install the caging and then get everything put away.  
> I would be open to an evening during the week or a weekend. 
> 
> I will have some tools and we will have to get some fasteners. Other tools would be helpful. 
> 
> In Service
> 
> -- 
> James A. Bloomer
>  
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/


From mogoldfish at yahoo.com  Tue Aug  2 21:50:58 2022
From: mogoldfish at yahoo.com (Kristine Clough)
Date: Wed, 3 Aug 2022 02:50:58 +0000 (UTC)
Subject: [crw-talk] Board Meeting
In-Reply-To: <F9DBC837-0E36-45DE-948C-D2676B9AB0CA@mwt.net>
References: <CAGK6+hCcLyuRcmeyXmkbOthGoMtRODhNArLxBuGbe3k4GCStTA@mail.gmail.com>
	<F9DBC837-0E36-45DE-948C-D2676B9AB0CA@mwt.net>
Message-ID: <1954467211.62486.1659495058775@mail.yahoo.com>

Yes, it will work for me
Kris

Sent from Yahoo Mail on Android 
 
  On Tue, Aug 2, 2022 at 3:16 PM, Mwt<griff at mwt.net> wrote:   Yup, it will work for me. John

Sent from my iPhone

> On Aug 2, 2022, at 3:05 PM, James Bloomer <marine9096 at gmail.com> wrote:
> 
> ?
> Will Thursday at 730 pm work? 
> 
> -- 
> James A. Bloomer
>? 
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/


_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220803/af406d2d/attachment.html>

From aaronagesicki at gmail.com  Wed Aug  3 04:55:56 2022
From: aaronagesicki at gmail.com (Aaron Gesicki)
Date: Wed, 3 Aug 2022 04:55:56 -0500
Subject: [crw-talk] Board Meeting
In-Reply-To: <CAGK6+hCcLyuRcmeyXmkbOthGoMtRODhNArLxBuGbe3k4GCStTA@mail.gmail.com>
References: <CAGK6+hCcLyuRcmeyXmkbOthGoMtRODhNArLxBuGbe3k4GCStTA@mail.gmail.com>
Message-ID: <CAM9Ed3zVEcMzuPHZtT7d-y+QUfKDSN+BRYimadK52q_rDsF38g@mail.gmail.com>

Yes

Aaron Gesicki

On Tue, Aug 2, 2022, 3:05 PM James Bloomer <marine9096 at gmail.com> wrote:

> Will Thursday at 730 pm work?
>
> --
> James A. Bloomer
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220803/4dd131a5/attachment.html>

From jkphillips006 at gmail.com  Wed Aug  3 10:01:11 2022
From: jkphillips006 at gmail.com (John Phillips)
Date: Wed, 3 Aug 2022 10:01:11 -0500
Subject: [crw-talk] Board Meeting
In-Reply-To: <CAM9Ed3zVEcMzuPHZtT7d-y+QUfKDSN+BRYimadK52q_rDsF38g@mail.gmail.com>
References: <CAGK6+hCcLyuRcmeyXmkbOthGoMtRODhNArLxBuGbe3k4GCStTA@mail.gmail.com>
	<CAM9Ed3zVEcMzuPHZtT7d-y+QUfKDSN+BRYimadK52q_rDsF38g@mail.gmail.com>
Message-ID: <CAFUVfGi9U3hHJMSRAF8zHVQP05TPgn+DOfcjjppjzHN9h361KA@mail.gmail.com>

Good Morning Aaron:

My email address has changed,  jkphillips006 at gmail.com

Thank you

On Wed, Aug 3, 2022 at 4:56 AM Aaron Gesicki <aaronagesicki at gmail.com>
wrote:

> Yes
>
> Aaron Gesicki
>
> On Tue, Aug 2, 2022, 3:05 PM James Bloomer <marine9096 at gmail.com> wrote:
>
>> Will Thursday at 730 pm work?
>>
>> --
>> James A. Bloomer
>>
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
>> only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent:
>> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220803/f86eb0cd/attachment.html>

From marine9096 at gmail.com  Thu Aug  4 11:11:33 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Thu, 4 Aug 2022 11:11:33 -0500
Subject: [crw-talk] Zoom meeting invitation - James Bloomer's Zoom Meeting
Message-ID: <CAGK6+hAy4r6+DpTwTw7-R7Ge4+NfFsijp4whPDHE9-6ExmZHKg@mail.gmail.com>

James Bloomer is inviting you to a scheduled Zoom meeting.

Topic: James Bloomer's Zoom Meeting
Time: Aug 4, 2022 07:30 PM Central Time (US and Canada)

Join Zoom Meeting
https://us02web.zoom.us/j/8076430043?pwd=ajdBSnlOUVpkcEJndnQ5TTMzQ1pQdz09

Meeting ID: 807 643 0043
Passcode: 836573
One tap mobile
+13126266799,,8076430043#,,,,*836573# US (Chicago)
+16469313860,,8076430043#,,,,*836573# US

Dial by your location
        +1 312 626 6799 US (Chicago)
        +1 646 931 3860 US
        +1 929 205 6099 US (New York)
        +1 301 715 8592 US (Washington DC)
        +1 346 248 7799 US (Houston)
        +1 386 347 5053 US
        +1 564 217 2000 US
        +1 669 444 9171 US
        +1 669 900 6833 US (San Jose)
        +1 253 215 8782 US (Tacoma)
Meeting ID: 807 643 0043
Passcode: 836573
Find your local number: https://us02web.zoom.us/u/kfQHOzLdd
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220804/0f28da05/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/calendar
Size: 1277 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220804/0f28da05/attachment.ics>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Zoom-Meeting.ics
Type: text/calendar
Size: 1276 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220804/0f28da05/attachment-0001.ics>

From marine9096 at gmail.com  Fri Aug  5 13:50:50 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Fri, 5 Aug 2022 13:50:50 -0500
Subject: [crw-talk] Cage at Luther
Message-ID: <CAGK6+hD+_TwNF8K=KuMBDphs_5mo1uKz6kNvUD5-4dxwsTbsWQ@mail.gmail.com>

Received a call from Dan Larsen...he has put out cage up for us
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220805/95f58c2f/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 11003.jpeg
Type: image/jpeg
Size: 122903 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220805/95f58c2f/attachment.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 11004.jpeg
Type: image/jpeg
Size: 129733 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220805/95f58c2f/attachment-0001.jpeg>

From rjpatros05 at gmail.com  Fri Aug  5 14:05:40 2022
From: rjpatros05 at gmail.com (Robert Patros)
Date: Fri, 5 Aug 2022 14:05:40 -0500
Subject: [crw-talk] Cage at Luther
In-Reply-To: <CAGK6+hD+_TwNF8K=KuMBDphs_5mo1uKz6kNvUD5-4dxwsTbsWQ@mail.gmail.com>
References: <CAGK6+hD+_TwNF8K=KuMBDphs_5mo1uKz6kNvUD5-4dxwsTbsWQ@mail.gmail.com>
Message-ID: <D7C68FFE-7662-4001-8D44-DF1721C6EE49@gmail.com>

That was very nice of him! Already getting off to a great start!! 

Sent from my iPhone

> On Aug 5, 2022, at 1:51 PM, James Bloomer <marine9096 at gmail.com> wrote:
> 
> ?
> Received a call from Dan Larsen...he has put out cage up for us
> 
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 11003.jpeg
Type: image/jpeg
Size: 122903 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220805/df6c52ae/attachment.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 11004.jpeg
Type: image/jpeg
Size: 129733 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220805/df6c52ae/attachment-0001.jpeg>
-------------- next part --------------
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/

From griff at mwt.net  Fri Aug  5 14:09:39 2022
From: griff at mwt.net (John & Donna Griffiths)
Date: Fri, 05 Aug 2022 19:09:39 +0000
Subject: [crw-talk] Cage at Luther
In-Reply-To: <CAGK6+hD+_TwNF8K=KuMBDphs_5mo1uKz6kNvUD5-4dxwsTbsWQ@mail.gmail.com>
References: <CAGK6+hD+_TwNF8K=KuMBDphs_5mo1uKz6kNvUD5-4dxwsTbsWQ@mail.gmail.com>
Message-ID: <em204d4278-0df9-4044-883a-0cf62e0a3129@5999b548.com>

Sweet!  John

------ Original Message ------
>From "James Bloomer" <marine9096 at gmail.com>
To "CRW talk" <crw-talk at crwoodturner.com>
Date 8/5/2022 1:50:50 PM
Subject [crw-talk] Cage at Luther

>Received a call from Dan Larsen...he has put out cage up for us
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220805/ee3d55e6/attachment.html>

From raaschb at charter.net  Fri Aug  5 20:00:03 2022
From: raaschb at charter.net (Bob R)
Date: Fri, 05 Aug 2022 20:00:03 -0500
Subject: [crw-talk] Cage at Luther
Message-ID: <mailman.9.1659747621.364354.crw-talk_crwoodturner.com@crwoodturner.com>

Doesn't get any better than that. Nice welcome overture.

Bob R, Sent from my Phone
On Aug 5, 2022 1:50 PM, James Bloomer <marine9096 at gmail.com> wrote:
>
> Received a call from Dan Larsen...he has put out cage up for us
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220805/e4a5ff50/attachment.html>

From aaronagesicki at gmail.com  Sat Aug  6 06:10:27 2022
From: aaronagesicki at gmail.com (Aaron Gesicki)
Date: Sat, 6 Aug 2022 06:10:27 -0500
Subject: [crw-talk] Cage at Luther
In-Reply-To: <CAGK6+hD+_TwNF8K=KuMBDphs_5mo1uKz6kNvUD5-4dxwsTbsWQ@mail.gmail.com>
References: <CAGK6+hD+_TwNF8K=KuMBDphs_5mo1uKz6kNvUD5-4dxwsTbsWQ@mail.gmail.com>
Message-ID: <08c601d8a985$22daf8b0$6890ea10$@gmail.com>

He was reading my mind. 

  <https://c.tenor.com/SFgxqzCoK7YAAAAi/ouch-headache.gif> 
 
Aaron Gesicki
 
On Fri, Aug 5, 2022, 1:51 PM James Bloomer <marine9096 at gmail.com <mailto:marine9096 at gmail.com> > wrote:
Received a call from Dan Larsen...he has put out cage up for us
 
 
_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> 
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220806/4ec8a50b/attachment.html>

From marine9096 at gmail.com  Sat Aug  6 09:54:09 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Sat, 6 Aug 2022 09:54:09 -0500
Subject: [crw-talk] Possible free Hickory
Message-ID: <CAGK6+hAr7=rR_Z0LK-nzPOrAYzwYhjB=-a0_6_OVGVQFhZfMLg@mail.gmail.com>

Good morning all, an individual in my reserve company has a friend that is
in the process of felling a mature Hickory tree that suffered storm damage.
It is located in Poy Sippi, WI. Closer to the east side of the state. Not
sure if the tree is hollow or not. If there is enough interest I would try
to organise a group to go and gather some .
When I get more info I will pass along
In service

-- 
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220806/e137fbc3/attachment.html>

From lydosolem at gmail.com  Sun Aug  7 10:06:04 2022
From: lydosolem at gmail.com (Lyle Solem)
Date: Sun, 7 Aug 2022 10:06:04 -0500
Subject: [crw-talk] Possible free Hickory
In-Reply-To: <CAGK6+hAr7=rR_Z0LK-nzPOrAYzwYhjB=-a0_6_OVGVQFhZfMLg@mail.gmail.com>
References: <CAGK6+hAr7=rR_Z0LK-nzPOrAYzwYhjB=-a0_6_OVGVQFhZfMLg@mail.gmail.com>
Message-ID: <CALNuyFQ+-2g7LO8Pp8GXT_VLDNFGtV_xANB3S54qt6D_9AT6DA@mail.gmail.com>

James

I would take a couple pieces of the Hickory tree if you brought it tio one
of our meetings.

Thank you

Lyle solem

On Sat, Aug 6, 2022 at 9:54 AM James Bloomer <marine9096 at gmail.com> wrote:

> Good morning all, an individual in my reserve company has a friend that is
> in the process of felling a mature Hickory tree that suffered storm damage.
> It is located in Poy Sippi, WI. Closer to the east side of the state. Not
> sure if the tree is hollow or not. If there is enough interest I would try
> to organise a group to go and gather some .
> When I get more info I will pass along
> In service
>
> --
> James A. Bloomer
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220807/9a6501f2/attachment.html>

From mogoldfish at yahoo.com  Mon Aug  8 15:54:14 2022
From: mogoldfish at yahoo.com (Kristine Clough)
Date: Mon, 8 Aug 2022 20:54:14 +0000 (UTC)
Subject: [crw-talk] James Howard Frank Obituary - Visitation & Funeral
 Information
References: <2064283124.1903016.1659992054433.ref@mail.yahoo.com>
Message-ID: <2064283124.1903016.1659992054433@mail.yahoo.com>

Information for Jim Frank's visitation and funeral.
https://www.dickinsonfuneralhome.com/obituaries/James-Howard-Frank?obId=25547053#/celebrationWall
Sent from Yahoo Mail on Android
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220808/5c8061f4/attachment.html>

From marine9096 at gmail.com  Mon Aug  8 21:46:39 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Mon, 8 Aug 2022 21:46:39 -0500
Subject: [crw-talk] Luther cage
Message-ID: <CAGK6+hDbrO63TOqWVUZ1Mz2xfhSnxYXj9-2iBbh8rFCCkBfsSw@mail.gmail.com>

Good evening, was looking at Thurs after school to move our stuff into the
cage. Asking everyone who can come by and help move the lathes and library
as well as our other items.  Start time at 4 pm...

In service

Jim Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220808/4c53d286/attachment.html>

From jdcrow1956 at yahoo.com  Tue Aug  9 00:52:32 2022
From: jdcrow1956 at yahoo.com (John Fisher)
Date: Tue, 9 Aug 2022 05:52:32 +0000 (UTC)
Subject: [crw-talk] Luther cage
In-Reply-To: <CAGK6+hDbrO63TOqWVUZ1Mz2xfhSnxYXj9-2iBbh8rFCCkBfsSw@mail.gmail.com>
References: <CAGK6+hDbrO63TOqWVUZ1Mz2xfhSnxYXj9-2iBbh8rFCCkBfsSw@mail.gmail.com>
Message-ID: <542939011.2648862.1660024352505@mail.yahoo.com>

 I can do most nights but Thursdays.? I have other obligations on Thursdays until after September.
    On Monday, August 8, 2022 at 09:47:23 PM CDT, James Bloomer <marine9096 at gmail.com> wrote:  
 
 Good evening, was looking at Thurs after school to move our stuff into the cage. Asking everyone who can come by and help move the lathes and library as well as our other items.? Start time at 4 pm...
In service
Jim Bloomer?_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220809/d578f29f/attachment.html>

From wisawdust at charter.net  Tue Aug  9 07:36:18 2022
From: wisawdust at charter.net (wisawdust)
Date: Tue, 09 Aug 2022 07:36:18 -0500
Subject: [crw-talk] Luther cage
In-Reply-To: <CAGK6+hDbrO63TOqWVUZ1Mz2xfhSnxYXj9-2iBbh8rFCCkBfsSw@mail.gmail.com>
Message-ID: <mailman.10.1660048590.364354.crw-talk_crwoodturner.com@crwoodturner.com>

I plan on being thereSent from my Galaxy
-------- Original message --------From: James Bloomer <marine9096 at gmail.com> Date: 8/8/22  9:47 PM  (GMT-06:00) To: CRW talk <crw-talk at crwoodturner.com> Subject: [crw-talk] Luther cage Good evening, was looking at Thurs after school to move our stuff into the cage. Asking everyone who can come by and help move the lathes and library as well as our other items.? Start time at 4 pm...In serviceJim Bloomer?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220809/6e37039c/attachment.html>

From jdcrow1956 at yahoo.com  Tue Aug  9 17:34:50 2022
From: jdcrow1956 at yahoo.com (John Fisher)
Date: Tue, 9 Aug 2022 22:34:50 +0000 (UTC)
Subject: [crw-talk] Luther cage
In-Reply-To: <CAGK6+hDbrO63TOqWVUZ1Mz2xfhSnxYXj9-2iBbh8rFCCkBfsSw@mail.gmail.com>
References: <CAGK6+hDbrO63TOqWVUZ1Mz2xfhSnxYXj9-2iBbh8rFCCkBfsSw@mail.gmail.com>
Message-ID: <1709594903.3049633.1660084490109@mail.yahoo.com>

 I am available Thursday afternoon 12:00 until 4:00 if someone can be there with me.?
    On Monday, August 8, 2022 at 09:47:23 PM CDT, James Bloomer <marine9096 at gmail.com> wrote:  
 
 Good evening, was looking at Thurs after school to move our stuff into the cage. Asking everyone who can come by and help move the lathes and library as well as our other items.? Start time at 4 pm...
In service
Jim Bloomer?_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220809/c67cd85b/attachment.html>

From mogoldfish at yahoo.com  Wed Aug 10 17:02:13 2022
From: mogoldfish at yahoo.com (Kristine Clough)
Date: Wed, 10 Aug 2022 22:02:13 +0000 (UTC)
Subject: [crw-talk] Free items
References: <1805612349.138923.1660168933446.ref@mail.yahoo.com>
Message-ID: <1805612349.138923.1660168933446@mail.yahoo.com>




Pictured above are some items that Jim's? family is giving away.
There is a 55 gallon barrel with a bunch of denatured alcohol.
A one gallon can of denatured alcohol
2? - 5 gallon containers with Artisan wood sealer in it.? Unknown amount in these.?2 -1 gallon containers with Artisan wood sealer.
Please contact Brenda Frank at 608-386-4968 for pick up.
Kris
Sent from Yahoo Mail on Android
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220810/6ba333fb/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20220809_184427.jpg
Type: image/jpeg
Size: 3870521 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220810/6ba333fb/attachment.jpg>

From wisawdust at charter.net  Thu Aug 11 09:27:48 2022
From: wisawdust at charter.net (wisawdust at charter.net)
Date: Thu, 11 Aug 2022 14:27:48 +0000
Subject: [crw-talk] Denatured Alcohol Available
Message-ID: <2791dc72a3f3345bb21721eebeb54a6d67d6f5ab@webmail>

Got a call from Bill Bendel of A-Line yesterday. They were picking up
a barrel of denatured alcohol Jim Frank had. he will have it at A-Line
for people who are interested. Bring your own container.
He also said they have two 25 gallon containers of anchor seal like
substance that Jim had. Also available for people who want it.
Duane
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220811/8743bd80/attachment.html>

From rjpatros05 at gmail.com  Wed Aug 17 09:29:35 2022
From: rjpatros05 at gmail.com (Robert Patros)
Date: Wed, 17 Aug 2022 09:29:35 -0500
Subject: [crw-talk] Champagne flute
Message-ID: <8EFF22CA-E38E-48A6-8EAA-F4EC0C43E57D@gmail.com>

Well, I had some fun in the shop after a long layoff. My daughter brought me two broken champagne flute glasses to fix up. I used a block of mahogany and it came out pretty good. Spray lacquer gloss finish. 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_7333.jpg
Type: image/jpeg
Size: 2119510 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220817/9c9328b0/attachment.jpg>
-------------- next part --------------


Sent from my iPhone

From EganR at westerntc.edu  Wed Aug 17 10:04:50 2022
From: EganR at westerntc.edu (Egan, Richard)
Date: Wed, 17 Aug 2022 15:04:50 +0000
Subject: [crw-talk] Champagne flute
In-Reply-To: <8EFF22CA-E38E-48A6-8EAA-F4EC0C43E57D@gmail.com>
References: <8EFF22CA-E38E-48A6-8EAA-F4EC0C43E57D@gmail.com>
Message-ID: <BN7PR03MB36996DEEEE2FBB9F4ED639F2A46A9@BN7PR03MB3699.namprd03.prod.outlook.com>

That is very nice, Bob.

From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Robert Patros
Sent: Wednesday, August 17, 2022 9:30 AM
To: crw-talk at crwoodturner.com
Subject: [crw-talk] Champagne flute

CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe.


Well, I had some fun in the shop after a long layoff. My daughter brought me two broken champagne flute glasses to fix up. I used a block of mahogany and it came out pretty good. Spray lacquer gloss finish.
[cid:image001.jpg at 01D8B220.C83D2E60]


Sent from my iPhone
_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com<mailto:crw-talk at crwoodturner.com>
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220817/75cc0ee4/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2445773 bytes
Desc: image001.jpg
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220817/75cc0ee4/attachment.jpg>

From llswigg at mwt.net  Wed Aug 17 11:08:36 2022
From: llswigg at mwt.net (Lavonne Swiggum)
Date: Wed, 17 Aug 2022 11:08:36 -0500
Subject: [crw-talk] Champagne flute
In-Reply-To: <8EFF22CA-E38E-48A6-8EAA-F4EC0C43E57D@gmail.com>
References: <8EFF22CA-E38E-48A6-8EAA-F4EC0C43E57D@gmail.com>
Message-ID: <3B1E9ECB-02C3-4320-A9C9-A6BBECB50665@mwt.net>

Wow.  Very nice Bob!




> On Aug 17, 2022, at 9:29 AM, Robert Patros <rjpatros05 at gmail.com> wrote:
> 
> Well, I had some fun in the shop after a long layoff. My daughter brought me two broken champagne flute glasses to fix up. I used a block of mahogany and it came out pretty good. Spray lacquer gloss finish. 
> 
> <IMG_7333.jpg>
> 
> Sent from my iPhone_________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/




From rjpatros05 at gmail.com  Wed Aug 17 11:23:27 2022
From: rjpatros05 at gmail.com (Robert Patros)
Date: Wed, 17 Aug 2022 11:23:27 -0500
Subject: [crw-talk] Champagne flute
In-Reply-To: <3B1E9ECB-02C3-4320-A9C9-A6BBECB50665@mwt.net>
References: <3B1E9ECB-02C3-4320-A9C9-A6BBECB50665@mwt.net>
Message-ID: <A888093C-A07F-42A6-903E-ABB5F5206537@gmail.com>

Thanks, Lavonne! It felt good to hold a tool again. 

Sent from my iPhone

> On Aug 17, 2022, at 11:09 AM, Lavonne Swiggum <llswigg at mwt.net> wrote:
> 
> ?Wow.  Very nice Bob!
> 
> 
> 
> 
>> On Aug 17, 2022, at 9:29 AM, Robert Patros <rjpatros05 at gmail.com> wrote:
>> 
>> Well, I had some fun in the shop after a long layoff. My daughter brought me two broken champagne flute glasses to fix up. I used a block of mahogany and it came out pretty good. Spray lacquer gloss finish. 
>> 
>> <IMG_7333.jpg>
>> 
>> Sent from my iPhone_________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
> 
> 
> 
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/


From rjpatros05 at gmail.com  Wed Aug 17 11:27:33 2022
From: rjpatros05 at gmail.com (Robert Patros)
Date: Wed, 17 Aug 2022 11:27:33 -0500
Subject: [crw-talk] Champagne flute
In-Reply-To: <BN7PR03MB36996DEEEE2FBB9F4ED639F2A46A9@BN7PR03MB3699.namprd03.prod.outlook.com>
References: <BN7PR03MB36996DEEEE2FBB9F4ED639F2A46A9@BN7PR03MB3699.namprd03.prod.outlook.com>
Message-ID: <0FFD6EA5-99F1-405E-81B0-0B21CA4C5D2F@gmail.com>

Thanks, Rich! Nice to finally use the mahogany I?ve been storing for 10 years. 

Sent from my iPhone

> On Aug 17, 2022, at 10:05 AM, Egan, Richard <EganR at westerntc.edu> wrote:
> 
> ?
> That is very nice, Bob.
>  
> From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Robert Patros
> Sent: Wednesday, August 17, 2022 9:30 AM
> To: crw-talk at crwoodturner.com
> Subject: [crw-talk] Champagne flute
>  
> CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe.
> 
> 
> Well, I had some fun in the shop after a long layoff. My daughter brought me two broken champagne flute glasses to fix up. I used a block of mahogany and it came out pretty good. Spray lacquer gloss finish.
> 
> 
> 
> 
> Sent from my iPhone
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220817/adcb49b0/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2445773 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220817/adcb49b0/attachment.jpg>

From EganR at westerntc.edu  Wed Aug 17 11:51:39 2022
From: EganR at westerntc.edu (Egan, Richard)
Date: Wed, 17 Aug 2022 16:51:39 +0000
Subject: [crw-talk] Champagne flute
In-Reply-To: <0FFD6EA5-99F1-405E-81B0-0B21CA4C5D2F@gmail.com>
References: <BN7PR03MB36996DEEEE2FBB9F4ED639F2A46A9@BN7PR03MB3699.namprd03.prod.outlook.com>
	<0FFD6EA5-99F1-405E-81B0-0B21CA4C5D2F@gmail.com>
Message-ID: <BN7PR03MB3699BC9F9AB1B20427871E7CA46A9@BN7PR03MB3699.namprd03.prod.outlook.com>

I need to get back projects again as well. It has been a long break.

From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Robert Patros
Sent: Wednesday, August 17, 2022 11:28 AM
To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. <crw-talk at crwoodturner.com>
Subject: Re: [crw-talk] Champagne flute

Thanks, Rich! Nice to finally use the mahogany I?ve been storing for 10 years.
Sent from my iPhone


On Aug 17, 2022, at 10:05 AM, Egan, Richard <EganR at westerntc.edu<mailto:EganR at westerntc.edu>> wrote:
?
That is very nice, Bob.

From: crw-talk <crw-talk-bounces at crwoodturner.com<mailto:crw-talk-bounces at crwoodturner.com>> On Behalf Of Robert Patros
Sent: Wednesday, August 17, 2022 9:30 AM
To: crw-talk at crwoodturner.com<mailto:crw-talk at crwoodturner.com>
Subject: [crw-talk] Champagne flute

CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe.


Well, I had some fun in the shop after a long layoff. My daughter brought me two broken champagne flute glasses to fix up. I used a block of mahogany and it came out pretty good. Spray lacquer gloss finish.
[image001.jpg]


Sent from my iPhone
_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com<mailto:crw-talk at crwoodturner.com>
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com<mailto:crw-talk at crwoodturner.com>
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220817/1a72865c/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 2445773 bytes
Desc: image001.jpg
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220817/1a72865c/attachment.jpg>

From raaschb at charter.net  Wed Aug 17 13:03:57 2022
From: raaschb at charter.net (Bob R)
Date: Wed, 17 Aug 2022 13:03:57 -0500
Subject: [crw-talk] Champagne flute
Message-ID: <mailman.11.1660759455.364354.crw-talk_crwoodturner.com@crwoodturner.com>

Hey Bob,
That's a nice save. Good work on the stem base.

Bob R, Sent from my Phone
On Aug 17, 2022 9:29 AM, Robert Patros <rjpatros05 at gmail.com> wrote:
>
> Well, I had some fun in the shop after a long layoff. My daughter brought me two broken champagne flute glasses to fix up. I used a block of mahogany and it came out pretty good. Spray lacquer gloss finish. 
>
>
>
> Sent from my iPhone
> _________________________________________ 
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. 
> ______ 
> crw-talk mailing list 
> crw-talk at crwoodturner.com 
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com 
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ 

From rjpatros05 at gmail.com  Wed Aug 17 13:08:47 2022
From: rjpatros05 at gmail.com (Robert Patros)
Date: Wed, 17 Aug 2022 13:08:47 -0500
Subject: [crw-talk] Champagne flute
In-Reply-To: <62fd2db9.050a0220.46d20.b12fSMTPIN_ADDED_MISSING@mx.google.com>
References: <62fd2db9.050a0220.46d20.b12fSMTPIN_ADDED_MISSING@mx.google.com>
Message-ID: <D094CB5D-B19E-4056-A55E-B88368E38B4C@gmail.com>

Thanks, Bob! The challenge was the remaining stem was tapered so had to improvise. 

Sent from my iPhone

> On Aug 17, 2022, at 1:04 PM, Bob R <raaschb at charter.net> wrote:
> 
> ?Hey Bob,
> That's a nice save. Good work on the stem base.
> 
> Bob R, Sent from my Phone
>> On Aug 17, 2022 9:29 AM, Robert Patros <rjpatros05 at gmail.com> wrote:
>> 
>> Well, I had some fun in the shop after a long layoff. My daughter brought me two broken champagne flute glasses to fix up. I used a block of mahogany and it came out pretty good. Spray lacquer gloss finish. 
>> 
>> 
>> 
>> Sent from my iPhone
>> _________________________________________ 
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. 
>> ______ 
>> crw-talk mailing list 
>> crw-talk at crwoodturner.com 
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com 
>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ 
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/


From larryandros at msn.com  Wed Aug 17 14:42:13 2022
From: larryandros at msn.com (LARRY KRAJEWSKI)
Date: Wed, 17 Aug 2022 19:42:13 +0000
Subject: [crw-talk] Champagne flute
In-Reply-To: <A888093C-A07F-42A6-903E-ABB5F5206537@gmail.com>
References: <3B1E9ECB-02C3-4320-A9C9-A6BBECB50665@mwt.net>
	<A888093C-A07F-42A6-903E-ABB5F5206537@gmail.com>
Message-ID: <LV2PR12MB577692DDB99C733D4FAA5DC9B46A9@LV2PR12MB5776.namprd12.prod.outlook.com>

Really nice Bob.

Sent from my iPad

> On Aug 17, 2022, at 11:24 AM, Robert Patros <rjpatros05 at gmail.com> wrote:
> 
> ?Thanks, Lavonne! It felt good to hold a tool again. 
> 
> Sent from my iPhone
> 
>> On Aug 17, 2022, at 11:09 AM, Lavonne Swiggum <llswigg at mwt.net> wrote:
>> 
>> ?Wow.  Very nice Bob!
>> 
>> 
>> 
>> 
>>>> On Aug 17, 2022, at 9:29 AM, Robert Patros <rjpatros05 at gmail.com> wrote:
>>> 
>>> Well, I had some fun in the shop after a long layoff. My daughter brought me two broken champagne flute glasses to fix up. I used a block of mahogany and it came out pretty good. Spray lacquer gloss finish. 
>>> 
>>> <IMG_7333.jpg>
>>> 
>>> Sent from my iPhone_________________________________________
>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>>> ______
>>> crw-talk mailing list
>>> crw-talk at crwoodturner.com
>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>> 
>> 
>> 
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
> 
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/

From rjpatros05 at gmail.com  Wed Aug 17 14:45:16 2022
From: rjpatros05 at gmail.com (Robert Patros)
Date: Wed, 17 Aug 2022 14:45:16 -0500
Subject: [crw-talk] Champagne flute
In-Reply-To: <LV2PR12MB577692DDB99C733D4FAA5DC9B46A9@LV2PR12MB5776.namprd12.prod.outlook.com>
References: <LV2PR12MB577692DDB99C733D4FAA5DC9B46A9@LV2PR12MB5776.namprd12.prod.outlook.com>
Message-ID: <3C65565E-908E-4DA6-866A-5E1B097D542E@gmail.com>

Thanks, Larry! Remember, if you go to the meeting we?re relocated to Luther High School. 

Sent from my iPhone

> On Aug 17, 2022, at 2:42 PM, LARRY KRAJEWSKI <larryandros at msn.com> wrote:
> 
> ?Really nice Bob.
> 
> Sent from my iPad
> 
>> On Aug 17, 2022, at 11:24 AM, Robert Patros <rjpatros05 at gmail.com> wrote:
>> 
>> ?Thanks, Lavonne! It felt good to hold a tool again. 
>> 
>> Sent from my iPhone
>> 
>>>> On Aug 17, 2022, at 11:09 AM, Lavonne Swiggum <llswigg at mwt.net> wrote:
>>> 
>>> ?Wow.  Very nice Bob!
>>> 
>>> 
>>> 
>>> 
>>>>> On Aug 17, 2022, at 9:29 AM, Robert Patros <rjpatros05 at gmail.com> wrote:
>>>> 
>>>> Well, I had some fun in the shop after a long layoff. My daughter brought me two broken champagne flute glasses to fix up. I used a block of mahogany and it came out pretty good. Spray lacquer gloss finish. 
>>>> 
>>>> <IMG_7333.jpg>
>>>> 
>>>> Sent from my iPhone_________________________________________
>>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>>>> ______
>>>> crw-talk mailing list
>>>> crw-talk at crwoodturner.com
>>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>> 
>>> 
>>> 
>>> _________________________________________
>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>>> ______
>>> crw-talk mailing list
>>> crw-talk at crwoodturner.com
>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>> 
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/


From marine9096 at gmail.com  Thu Aug 18 13:57:39 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Thu, 18 Aug 2022 13:57:39 -0500
Subject: [crw-talk] Luther open shop schedule
Message-ID: <CAGK6+hCgm4TMLXEvWWUeF5YOW6yf56eg8Jxej=YDQZHDWHSQmQ@mail.gmail.com>

Good afternoon, with the start of school fast approaching. We need to set a
schedule for the open shop night.
For those new to us, in exchange for sponsoring us as a club at Luther, we
agreed to host an open shop night once a month at the wood shop and teach
turning techniques. In discussions with Dan L. at Luther we agreed
Wednesdays are the better choice to avoid conflicts with sports practices
and other events.
We have to host one night a month, but we can have more if the instructor
wants it. If a subject would take 2,3 or more days. We can schedule them.
For example I am doing inside out turning, which will take 2 days to
complete minimum.
There will need at least one volunteer, more are appreciated. If you dont
feel comfortable teaching a subject, at least come by and assist with the
safety aspect, evaluating techniques and offering insights. We all know
there is more than one way to turn various projects and materials.
Tentative schedule based on current volunteers

Sept 14 4 pm -7 pm Beginning woodturning Duane Hill
Oct 12   4 pm - 7 pm Spindle Turning John Griffiths
Nov 9     4 pm - 7 pm Inside out turning Jim Bloomer
Dec 14   4 pm - 7 pm  Pen Turning Jay Johnson
Jan 11    4 pm - 7 pm Boxes Andrew Pingree
Feb 8     4 pm - 7 pm Open
Mar 8     4 pm - 7 pm Open
Apr 12    4 pm - 7 pm Open
May 10   4 pm - 7 pm Open

Dates may have to shift due to conflicts with other school events.
Class size is at the discretion of the instructor and available equipment.
-If you need more days, let us know what days would work in addition to the
base date.
-If you need materials, let us know so we can work with Luther to see if
they can acquire or have an inexpensive source.

We will discuss further details at the meeting.

In Service
-- 
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220818/aae5d29d/attachment.html>

From marine9096 at gmail.com  Thu Aug 18 14:00:49 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Thu, 18 Aug 2022 14:00:49 -0500
Subject: [crw-talk] Meeting setup
Message-ID: <CAGK6+hBeDnOR2XsJUMnCChm0Aq23exYrMUfbntFEowC3U_4q2w@mail.gmail.com>

I will be going to Luther Fri evening to set up a portion for Saturday's
meeting. Anyone is welcome to come and help.

We have received keys and fobs in order to enter the building.
-- 
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220818/70df3132/attachment.html>

From mogoldfish at yahoo.com  Thu Aug 18 16:50:51 2022
From: mogoldfish at yahoo.com (Kristine Clough)
Date: Thu, 18 Aug 2022 21:50:51 +0000 (UTC)
Subject: [crw-talk] Meeting setup
In-Reply-To: <CAGK6+hBeDnOR2XsJUMnCChm0Aq23exYrMUfbntFEowC3U_4q2w@mail.gmail.com>
References: <CAGK6+hBeDnOR2XsJUMnCChm0Aq23exYrMUfbntFEowC3U_4q2w@mail.gmail.com>
Message-ID: <1430382901.399125.1660859451254@mail.yahoo.com>

What time?

Sent from Yahoo Mail on Android 
 
  On Thu, Aug 18, 2022 at 2:01 PM, James Bloomer<marine9096 at gmail.com> wrote:   
I will be going to Luther Fri evening to set up a portion for Saturday's meeting. Anyone is welcome to come and help.?
We have received keys and fobs in order to enter the building.?-- 
James A. Bloomer?_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220818/bf4ba277/attachment.html>

From jdwilson at acegroup.cc  Fri Aug 19 03:59:47 2022
From: jdwilson at acegroup.cc (jdwilson)
Date: Fri, 19 Aug 2022 03:59:47 -0500
Subject: [crw-talk] Meeting setup
In-Reply-To: <CAGK6+hBeDnOR2XsJUMnCChm0Aq23exYrMUfbntFEowC3U_4q2w@mail.gmail.com>
Message-ID: fb102055fa52303b20622999c3251628

What time do you plan to begin the work?? Do we enter the door to the shop or the main entrance?Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------From: James Bloomer <marine9096 at gmail.com> Date: 8/18/22  2:01 PM  (GMT-06:00) To: CRW talk <crw-talk at crwoodturner.com> Subject: [crw-talk] Meeting setup I will be going to Luther Fri evening to set up a portion for Saturday's meeting. Anyone is welcome to come and help.?We have received keys and fobs in order to enter the building.?-- James A. Bloomer
?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220819/10ea23a6/attachment.html>

From marine9096 at gmail.com  Fri Aug 19 09:47:29 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Fri, 19 Aug 2022 09:47:29 -0500
Subject: [crw-talk] Meeting setup
In-Reply-To: <62ff5131.050a0220.b6b68.b8afSMTPIN_ADDED_BROKEN@mx.google.com>
References: <CAGK6+hBeDnOR2XsJUMnCChm0Aq23exYrMUfbntFEowC3U_4q2w@mail.gmail.com>
	<62ff5131.050a0220.b6b68.b8afSMTPIN_ADDED_BROKEN@mx.google.com>
Message-ID: <CAGK6+hCBeoNVFufMnavoVjca8m9WQnPBvonkdCUvez0pHMRURw@mail.gmail.com>

Will try to be there about 430

On Fri, Aug 19, 2022, 04:00 jdwilson <jdwilson at acegroup.cc> wrote:

> What time do you plan to begin the work?  Do we enter the door to the shop
> or the main entrance?
>
>
>
> Sent from my Verizon, Samsung Galaxy smartphone
>
>
> -------- Original message --------
> From: James Bloomer <marine9096 at gmail.com>
> Date: 8/18/22 2:01 PM (GMT-06:00)
> To: CRW talk <crw-talk at crwoodturner.com>
> Subject: [crw-talk] Meeting setup
>
>
> I will be going to Luther Fri evening to set up a portion for Saturday's
> meeting. Anyone is welcome to come and help.
>
> We have received keys and fobs in order to enter the building.
> --
> James A. Bloomer
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220819/66ce9e42/attachment.html>

From mogoldfish at yahoo.com  Fri Aug 19 12:51:20 2022
From: mogoldfish at yahoo.com (Kristine Clough)
Date: Fri, 19 Aug 2022 17:51:20 +0000 (UTC)
Subject: [crw-talk] Meeting setup
In-Reply-To: <CAGK6+hCBeoNVFufMnavoVjca8m9WQnPBvonkdCUvez0pHMRURw@mail.gmail.com>
References: <CAGK6+hBeDnOR2XsJUMnCChm0Aq23exYrMUfbntFEowC3U_4q2w@mail.gmail.com>
	<62ff5131.050a0220.b6b68.b8afSMTPIN_ADDED_BROKEN@mx.google.com>
	<CAGK6+hCBeoNVFufMnavoVjca8m9WQnPBvonkdCUvez0pHMRURw@mail.gmail.com>
Message-ID: <660019990.265091.1660931480377@mail.yahoo.com>

I will be there.
Kris

Sent from Yahoo Mail on Android 
 
  On Fri, Aug 19, 2022 at 9:48 AM, James Bloomer<marine9096 at gmail.com> wrote:   Will try to be there about 430
On Fri, Aug 19, 2022, 04:00 jdwilson <jdwilson at acegroup.cc> wrote:

What time do you plan to begin the work?? Do we enter the door to the shop or the main entrance?


Sent from my Verizon, Samsung Galaxy smartphone

-------- Original message --------From: James Bloomer <marine9096 at gmail.com> Date: 8/18/22 2:01 PM (GMT-06:00) To: CRW talk <crw-talk at crwoodturner.com> Subject: [crw-talk] Meeting setup 

I will be going to Luther Fri evening to set up a portion for Saturday's meeting. Anyone is welcome to come and help.?
We have received keys and fobs in order to enter the building.?-- 
James A. Bloomer?_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/

_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220819/75bdedc3/attachment.html>

From marine9096 at gmail.com  Fri Aug 19 14:53:07 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Fri, 19 Aug 2022 14:53:07 -0500
Subject: [crw-talk] Meeting tomorrow
Message-ID: <CAGK6+hAiQYZtE5dc3Ly=rHfBBm8DJJOyM64XzOsHTv5ZXwNaOA@mail.gmail.com>

A reminder that the meeting tomorrow is at our new location at Luther High
School. Same time as before
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220819/802d2648/attachment.html>

From jdcrow1956 at yahoo.com  Fri Aug 19 19:06:39 2022
From: jdcrow1956 at yahoo.com (John Fisher)
Date: Sat, 20 Aug 2022 00:06:39 +0000 (UTC)
Subject: [crw-talk] Champagne flute
In-Reply-To: <8EFF22CA-E38E-48A6-8EAA-F4EC0C43E57D@gmail.com>
References: <8EFF22CA-E38E-48A6-8EAA-F4EC0C43E57D@gmail.com>
Message-ID: <1293167013.493450.1660953999764@mail.yahoo.com>

 I like the shape you did. The diameter of the foot and length matches the shape of the goblet.?
    On Wednesday, August 17, 2022 at 09:30:47 AM CDT, Robert Patros <rjpatros05 at gmail.com> wrote:  
 
 Well, I had some fun in the shop after a long layoff. My daughter brought me two broken champagne flute glasses to fix up. I used a block of mahogany and it came out pretty good. Spray lacquer gloss finish. 



Sent from my iPhone_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220820/5cc7d9b5/attachment.html>

From marine9096 at gmail.com  Fri Aug 19 21:35:09 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Fri, 19 Aug 2022 21:35:09 -0500
Subject: [crw-talk] Zoom meeting invitation - General Meeting
Message-ID: <CAGK6+hDWhci4DGC-TaUGCdZgo3=+eqKkRwRdRwJZYavOqjmyjw@mail.gmail.com>

James Bloomer is inviting you to a scheduled Zoom meeting.

Topic: General Meeting
Time: Aug 20, 2022 09:00 AM Central Time (US and Canada)

Join Zoom Meeting
https://us02web.zoom.us/j/8076430043?pwd=ajdBSnlOUVpkcEJndnQ5TTMzQ1pQdz09

Meeting ID: 807 643 0043
Passcode: 836573
One tap mobile
+13126266799,,8076430043#,,,,*836573# US (Chicago)
+16469313860,,8076430043#,,,,*836573# US

Dial by your location
        +1 312 626 6799 US (Chicago)
        +1 646 931 3860 US
        +1 929 205 6099 US (New York)
        +1 301 715 8592 US (Washington DC)
        +1 309 205 3325 US
        +1 669 444 9171 US
        +1 669 900 6833 US (San Jose)
        +1 719 359 4580 US
        +1 253 215 8782 US (Tacoma)
        +1 346 248 7799 US (Houston)
        +1 386 347 5053 US
        +1 564 217 2000 US
Meeting ID: 807 643 0043
Passcode: 836573
Find your local number: https://us02web.zoom.us/u/kfQHOzLdd
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220819/aba56e7c/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/calendar
Size: 1310 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220819/aba56e7c/attachment.ics>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Zoom-Meeting.ics
Type: text/calendar
Size: 1309 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220819/aba56e7c/attachment-0001.ics>

From raaschb at charter.net  Sun Aug 21 13:04:46 2022
From: raaschb at charter.net (Bob R)
Date: Sun, 21 Aug 2022 13:04:46 -0500
Subject: [crw-talk] Something to ponder....
Message-ID: <mailman.12.1661105102.364354.crw-talk_crwoodturner.com@crwoodturner.com>

I am reminded of many conversations? over the years I've had with Jim Frank about the importance of introducing woodturning to new people - youth to mature folks, as I read this article in the latest edition of Woodturning by? "Guest editor letter" by Jay Heryet.
Jim had a vision; he would be proud of what his local club is about to embark on by partnering with Onal Luther to further this creative craft of possibilities.
A couple of excerpts from the post. "The world is such a different place since I began turning in 1995, with many schools, naked of lathes and an ever-shrinking curriculum of practical subjects; not only do we have to encourage, we to? introduce the next generation to turning. Turners have been doing this."

Finally, " We may teach the next generation of aspects of woodturning - they will teach us so much more about the future..."

The 1 page article is so much more.

Of course, reflective comments are always welcomed by our club community of creative & generous folks.
Thx for reading.
Bob Raasch

Bob R, Sent from my Phone
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220821/d3222549/attachment.html>

From griff at mwt.net  Sun Aug 21 15:55:55 2022
From: griff at mwt.net (John & Donna Griffiths)
Date: Sun, 21 Aug 2022 20:55:55 +0000
Subject: [crw-talk] Something to ponder....
In-Reply-To: <20220821180519278@air-rc-cpdg-42.airstreamcomm.net>
References: <20220821180519278@air-rc-cpdg-42.airstreamcomm.net>
Message-ID: <em1ce9b259-f1dd-46e9-b28f-9784fee0f170@10ca28f4.com>

Bob, Excellent note, I think we are carrying out Jim's vision, sadly he 
is no longer with us to share it.  John


------ Original Message ------
>From "Bob R" <raaschb at charter.net>
To "CRW talk" <crw-talk at crwoodturner.com>
Date 8/21/2022 1:04:46 PM
Subject [crw-talk] Something to ponder....

>I am reminded of many conversations  over the years I've had with Jim 
>Frank about the importance of introducing woodturning to new people - 
>youth to mature folks, as I read this article in the latest edition of 
>Woodturning by  "Guest editor letter" by Jay Heryet.
>Jim had a vision; he would be proud of what his local club is about to 
>embark on by partnering with Onal Luther to further this creative craft 
>of possibilities.
>A couple of excerpts from the post. "The world is such a different 
>place since I began turning in 1995, with many schools, naked of lathes 
>and an ever-shrinking curriculum of practical subjects; not only do we 
>have to encourage, we to  introduce the next generation to turning. 
>Turners have been doing this."
>
>Finally, " We may teach the next generation of aspects of woodturning - 
>they will teach us so much more about the future..."
>
>The 1 page article is so much more.
>
>Of course, reflective comments are always welcomed by our club 
>community of creative & generous folks.
>Thx for reading.
>Bob Raasch
>
>Bob R, Sent from my Phone
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220821/516abf1f/attachment.html>

From mogoldfish at yahoo.com  Sun Aug 21 17:24:46 2022
From: mogoldfish at yahoo.com (Kristine Clough)
Date: Sun, 21 Aug 2022 22:24:46 +0000 (UTC)
Subject: [crw-talk] Something to ponder....
In-Reply-To: <em1ce9b259-f1dd-46e9-b28f-9784fee0f170@10ca28f4.com>
References: <20220821180519278@air-rc-cpdg-42.airstreamcomm.net>
	<em1ce9b259-f1dd-46e9-b28f-9784fee0f170@10ca28f4.com>
Message-ID: <803492097.741650.1661120686749@mail.yahoo.com>

I had a chance to talk to Jim about pote tially moving to Luther High School before he passed away.? He was excited about it.
Kris

Sent from Yahoo Mail on Android 
 
  On Sun, Aug 21, 2022 at 3:56 PM, John & Donna Griffiths<griff at mwt.net> wrote:   <!--#yiv6939806900 blockquote.yiv6939806900cite {margin-left:5px;margin-right:0px;padding-left:10px;padding-right:0px;border-left:1px solid #cccccc;}#yiv6939806900 blockquote.yiv6939806900cite2 {margin-left:5px;margin-right:0px;padding-left:10px;padding-right:0px;border-left:1px solid #cccccc;margin-top:3px;padding-top:0px;}#yiv6939806900 a img {border:0px;}#yiv6939806900 -->Bob, Excellent note, I think we are carrying out Jim's vision, sadly he is no longer with us to share it.? John

------ Original Message ------From "Bob R" <raaschb at charter.net>To "CRW talk" <crw-talk at crwoodturner.com>Date 8/21/2022 1:04:46 PMSubject [crw-talk] Something to ponder....

I am reminded of many conversations? over the years I've had with Jim Frank about the importance of introducing woodturning to new people - youth to mature folks, as I read this article in the latest edition of Woodturning by? "Guest editor letter" by Jay Heryet. Jim had a vision; he would be proud of what his local club is about to embark on by partnering with Onal Luther to further this creative craft of possibilities.  A couple of excerpts from the post. "The world is such a different place since I began turning in 1995, with many schools, naked of lathes and an ever-shrinking curriculum of practical subjects; not only do we have to encourage, we to? introduce the next generation to turning. Turners have been doing this."
Finally, " We may teach the next generation of aspects of woodturning - they will teach us so much more about the future..."
The 1 page article is so much more.
Of course, reflective comments are always welcomed by our club community of creative & generous folks. Thx for reading. Bob Raasch
Bob R, Sent from my Phone
_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220821/1fea08b8/attachment.html>

From rjpatros05 at gmail.com  Sun Aug 21 17:50:36 2022
From: rjpatros05 at gmail.com (Robert Patros)
Date: Sun, 21 Aug 2022 17:50:36 -0500
Subject: [crw-talk] Something to ponder....
In-Reply-To: <630273e6.630a0220.f21f.622cSMTPIN_ADDED_MISSING@mx.google.com>
References: <630273e6.630a0220.f21f.622cSMTPIN_ADDED_MISSING@mx.google.com>
Message-ID: <B9B28764-FB2A-47D1-8FEF-215CAF6D5CBE@gmail.com>

I too have great memories of times spent with Jim. I took my mom to his shop one time, over 13 years ago, and in Jim?s way, he gave her a beautiful bowl he turned. That?s Jim. Would give the shirt off his back. He will truly be missed by me. 

Sent from my iPhone

> On Aug 21, 2022, at 1:05 PM, Bob R <raaschb at charter.net> wrote:
> 
> ?
> I am reminded of many conversations  over the years I've had with Jim Frank about the importance of introducing woodturning to new people - youth to mature folks, as I read this article in the latest edition of Woodturning by  "Guest editor letter" by Jay Heryet.
> Jim had a vision; he would be proud of what his local club is about to embark on by partnering with Onal Luther to further this creative craft of possibilities.
> A couple of excerpts from the post. "The world is such a different place since I began turning in 1995, with many schools, naked of lathes and an ever-shrinking curriculum of practical subjects; not only do we have to encourage, we to  introduce the next generation to turning. Turners have been doing this."
> 
> Finally, " We may teach the next generation of aspects of woodturning - they will teach us so much more about the future..."
> 
> The 1 page article is so much more.
> 
> Of course, reflective comments are always welcomed by our club community of creative & generous folks.
> Thx for reading.
> Bob Raasch
> 
> Bob R, Sent from my Phone
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220821/32c59264/attachment.html>

From vgwintersteen at gmail.com  Sun Aug 21 18:11:45 2022
From: vgwintersteen at gmail.com (Virginia Wintersteen)
Date: Sun, 21 Aug 2022 18:11:45 -0500
Subject: [crw-talk] Something to ponder....
In-Reply-To: <B9B28764-FB2A-47D1-8FEF-215CAF6D5CBE@gmail.com>
References: <630273e6.630a0220.f21f.622cSMTPIN_ADDED_MISSING@mx.google.com>
	<B9B28764-FB2A-47D1-8FEF-215CAF6D5CBE@gmail.com>
Message-ID: <CAJPy7Z_0XYB6ysUo-tJ_x0kY5j7_FCy1G4vS0KOqi+R+=r82xg@mail.gmail.com>

I remember Jim, as a gentle giant with a big heart full of kindness. He was
always willing to share his knowledge, and took a special interest in
assuring new members felt welcomed. He invited me to his shop on several
occasions to help me learn hollowing techniques and how you can make
multiple bowl blanks out of single piece of wood.

Ginny

On Sun, Aug 21, 2022 at 5:51 PM Robert Patros <rjpatros05 at gmail.com> wrote:

> I too have great memories of times spent with Jim. I took my mom to his
> shop one time, over 13 years ago, and in Jim?s way, he gave her a beautiful
> bowl he turned. That?s Jim. Would give the shirt off his back. He will
> truly be missed by me.
>
> Sent from my iPhone
>
> On Aug 21, 2022, at 1:05 PM, Bob R <raaschb at charter.net> wrote:
>
> ?
> I am reminded of many conversations  over the years I've had with Jim
> Frank about the importance of introducing woodturning to new people - youth
> to mature folks, as I read this article in the latest edition of
> Woodturning by  "Guest editor letter" by Jay Heryet.
> Jim had a vision; he would be proud of what his local club is about to
> embark on by partnering with Onal Luther to further this creative craft of
> possibilities.
> A couple of excerpts from the post. "The world is such a different place
> since I began turning in 1995, with many schools, naked of lathes and an
> ever-shrinking curriculum of practical subjects; not only do we have to
> encourage, we to  introduce the next generation to turning. Turners have
> been doing this."
>
> Finally, " We may teach the next generation of aspects of woodturning -
> they will teach us so much more about the future..."
>
> The 1 page article is so much more.
>
> Of course, reflective comments are always welcomed by our club community
> of creative & generous folks.
> Thx for reading.
> Bob Raasch
>
> *Bob R, Sent from my Phone*
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220821/d1c475a6/attachment.html>

From raaschb at charter.net  Sun Aug 21 21:41:14 2022
From: raaschb at charter.net (Bob Raasch)
Date: Sun, 21 Aug 2022 21:41:14 -0500
Subject: [crw-talk] Something to ponder....
In-Reply-To: <CAJPy7Z_0XYB6ysUo-tJ_x0kY5j7_FCy1G4vS0KOqi+R+=r82xg@mail.gmail.com>
References: <630273e6.630a0220.f21f.622cSMTPIN_ADDED_MISSING@mx.google.com>	<B9B28764-FB2A-47D1-8FEF-215CAF6D5CBE@gmail.com>
	<CAJPy7Z_0XYB6ysUo-tJ_x0kY5j7_FCy1G4vS0KOqi+R+=r82xg@mail.gmail.com>
Message-ID: <001f01d8b5d0$a6200150$f26003f0$@charter.net>

Amen to that, Ginny.

 

From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Virginia Wintersteen
Sent: Sunday, August 21, 2022 6:12 PM
To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. <crw-talk at crwoodturner.com>
Subject: Re: [crw-talk] Something to ponder....

 

I remember Jim, as a gentle giant with a big heart full of kindness. He was always willing to share his knowledge, and took a special interest in assuring new members felt welcomed. He invited me to his shop on several occasions to help me learn hollowing techniques and how you can make multiple bowl blanks out of single piece of wood. 

 

Ginny

 

On Sun, Aug 21, 2022 at 5:51 PM Robert Patros <rjpatros05 at gmail.com <mailto:rjpatros05 at gmail.com> > wrote:

I too have great memories of times spent with Jim. I took my mom to his shop one time, over 13 years ago, and in Jim?s way, he gave her a beautiful bowl he turned. That?s Jim. Would give the shirt off his back. He will truly be missed by me. 

Sent from my iPhone





On Aug 21, 2022, at 1:05 PM, Bob R <raaschb at charter.net <mailto:raaschb at charter.net> > wrote:

?

I am reminded of many conversations  over the years I've had with Jim Frank about the importance of introducing woodturning to new people - youth to mature folks, as I read this article in the latest edition of Woodturning by  "Guest editor letter" by Jay Heryet. 

Jim had a vision; he would be proud of what his local club is about to embark on by partnering with Onal Luther to further this creative craft of possibilities. 

A couple of excerpts from the post. "The world is such a different place since I began turning in 1995, with many schools, naked of lathes and an ever-shrinking curriculum of practical subjects; not only do we have to encourage, we to  introduce the next generation to turning. Turners have been doing this."

 

Finally, " We may teach the next generation of aspects of woodturning - they will teach us so much more about the future..."

 

The 1 page article is so much more.

 

Of course, reflective comments are always welcomed by our club community of creative & generous folks. 

Thx for reading. 

Bob Raasch

 

Bob R, Sent from my Phone

_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> 
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/

_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> 
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220821/6c673c9a/attachment.html>

From marine9096 at gmail.com  Mon Aug 22 15:10:58 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Mon, 22 Aug 2022 15:10:58 -0500
Subject: [crw-talk] Open Shop night Schedule
Message-ID: <CAGK6+hBd-w1biWD=PQZNHv6_gL8vXs4K3OU3YhxxkQuRqOzphw@mail.gmail.com>

Sept 14 4 pm -7 pm Beginning woodturning Duane Hill
https://youtu.be/jcokD6zRyrw  and https://youtu.be/kunZIzNNxUY
Oct 12   4 pm - 7 pm Spindle Turning John Griffiths
https://youtu.be/VPprpxMoxV4
Nov 9     4 pm - 7 pm Inside out turning Jim Bloomer
https://youtu.be/weW5I_pknHQ
Dec 14   4 pm - 7 pm  Pen Turning Jay Johnson
https://youtu.be/Oq4VhV5YEjU
Jan 11    4 pm - 7 pm Boxes Andrew Pingree
https://youtu.be/Nv1FBbh8PFM
Feb 8     4 pm - 7 pm Introduction to 2 part Epoxy casting Julie Bloomer
https://youtu.be/u1T4uC6aSbY
Mar 8     4 pm - 7 pm Open
Apr 12    4 pm - 7 pm Open
May 10   4 pm - 7 pm Open

Webpage
https://www.crwoodturner.com/

Facebook page
https://www.facebook.com/groups/270051210553799/
Have to request to join

Instagram
https://instagram.com/crwoodturners?igshid=YmMyMTA2M2Y=
As mentioned we are looking to expand the basic turning class and develop a
skills test for those who have turned before.
What steps do we need to do to safety test the club on the equipment?
-- 
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220822/0f8891ab/attachment.html>

From andrewpingree at gmail.com  Tue Aug 23 13:22:55 2022
From: andrewpingree at gmail.com (Andrew)
Date: Tue, 23 Aug 2022 13:22:55 -0500
Subject: [crw-talk] Open Shop night Schedule
In-Reply-To: <CAGK6+hBd-w1biWD=PQZNHv6_gL8vXs4K3OU3YhxxkQuRqOzphw@mail.gmail.com>
References: <CAGK6+hBd-w1biWD=PQZNHv6_gL8vXs4K3OU3YhxxkQuRqOzphw@mail.gmail.com>
Message-ID: <CANRBiF7KKLUygJJnQ_t+nZk8vh3Ap52eBd6qf5But7V59giarw@mail.gmail.com>

Jim,

Am I doing bowls or boxes?

Andrew

On Mon, Aug 22, 2022, 3:11 PM James Bloomer <marine9096 at gmail.com> wrote:

> Sept 14 4 pm -7 pm Beginning woodturning Duane Hill
> https://youtu.be/jcokD6zRyrw  and https://youtu.be/kunZIzNNxUY
> Oct 12   4 pm - 7 pm Spindle Turning John Griffiths
> https://youtu.be/VPprpxMoxV4
> Nov 9     4 pm - 7 pm Inside out turning Jim Bloomer
> https://youtu.be/weW5I_pknHQ
> Dec 14   4 pm - 7 pm  Pen Turning Jay Johnson
> https://youtu.be/Oq4VhV5YEjU
> Jan 11    4 pm - 7 pm Boxes Andrew Pingree
> https://youtu.be/Nv1FBbh8PFM
> Feb 8     4 pm - 7 pm Introduction to 2 part Epoxy casting Julie Bloomer
> https://youtu.be/u1T4uC6aSbY
> Mar 8     4 pm - 7 pm Open
> Apr 12    4 pm - 7 pm Open
> May 10   4 pm - 7 pm Open
>
> Webpage
> https://www.crwoodturner.com/
>
> Facebook page
> https://www.facebook.com/groups/270051210553799/
> Have to request to join
>
> Instagram
> https://instagram.com/crwoodturners?igshid=YmMyMTA2M2Y=
> As mentioned we are looking to expand the basic turning class and develop
> a skills test for those who have turned before.
> What steps do we need to do to safety test the club on the equipment?
> --
> James A. Bloomer
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220823/4c503cc0/attachment.html>

From marine9096 at gmail.com  Tue Aug 23 14:02:56 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Tue, 23 Aug 2022 14:02:56 -0500
Subject: [crw-talk] Open Shop night Schedule
In-Reply-To: <CANRBiF7KKLUygJJnQ_t+nZk8vh3Ap52eBd6qf5But7V59giarw@mail.gmail.com>
References: <CAGK6+hBd-w1biWD=PQZNHv6_gL8vXs4K3OU3YhxxkQuRqOzphw@mail.gmail.com>
	<CANRBiF7KKLUygJJnQ_t+nZk8vh3Ap52eBd6qf5But7V59giarw@mail.gmail.com>
Message-ID: <CAGK6+hAEhqmg7OuJ3p0EMa6ifGzaSuV1iwKRTeKHLF4W4Y-R6Q@mail.gmail.com>

Meant to switch it to bowls. .the YouTube video is bowls at least

On Tue, Aug 23, 2022, 13:23 Andrew <andrewpingree at gmail.com> wrote:

> Jim,
>
> Am I doing bowls or boxes?
>
> Andrew
>
> On Mon, Aug 22, 2022, 3:11 PM James Bloomer <marine9096 at gmail.com> wrote:
>
>> Sept 14 4 pm -7 pm Beginning woodturning Duane Hill
>> https://youtu.be/jcokD6zRyrw  and https://youtu.be/kunZIzNNxUY
>> Oct 12   4 pm - 7 pm Spindle Turning John Griffiths
>> https://youtu.be/VPprpxMoxV4
>> Nov 9     4 pm - 7 pm Inside out turning Jim Bloomer
>> https://youtu.be/weW5I_pknHQ
>> Dec 14   4 pm - 7 pm  Pen Turning Jay Johnson
>> https://youtu.be/Oq4VhV5YEjU
>> Jan 11    4 pm - 7 pm Boxes Andrew Pingree
>> https://youtu.be/Nv1FBbh8PFM
>> Feb 8     4 pm - 7 pm Introduction to 2 part Epoxy casting Julie Bloomer
>> https://youtu.be/u1T4uC6aSbY
>> Mar 8     4 pm - 7 pm Open
>> Apr 12    4 pm - 7 pm Open
>> May 10   4 pm - 7 pm Open
>>
>> Webpage
>> https://www.crwoodturner.com/
>>
>> Facebook page
>> https://www.facebook.com/groups/270051210553799/
>> Have to request to join
>>
>> Instagram
>> https://instagram.com/crwoodturners?igshid=YmMyMTA2M2Y=
>> As mentioned we are looking to expand the basic turning class and develop
>> a skills test for those who have turned before.
>> What steps do we need to do to safety test the club on the equipment?
>> --
>> James A. Bloomer
>>
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
>> only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent:
>> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220823/739741cf/attachment.html>

From marine9096 at gmail.com  Wed Aug 24 19:54:32 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Wed, 24 Aug 2022 19:54:32 -0500
Subject: [crw-talk] COVID 19
Message-ID: <CAGK6+hAk8__CGT4W6wnygAv0uFH00AO=s8mAf1odyRJqehEU2g@mail.gmail.com>

Unfortunately COVID-19 is still a thing. I wanted to let everyone know I
just tested positive. Symptoms started on Monday evening.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220824/b3ed9992/attachment.html>

From marine9096 at gmail.com  Wed Aug 24 19:55:08 2022
From: marine9096 at gmail.com (James Bloomer)
Date: Wed, 24 Aug 2022 19:55:08 -0500
Subject: [crw-talk] COVID 19
Message-ID: <CAGK6+hD_hKcNmSq3ob66tXLZ0mnB+KMgCjGEHxdxQyo1cOoY+g@mail.gmail.com>

Forgot to add

Jim Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220824/07cb01cb/attachment.html>

From EganR at westerntc.edu  Wed Aug 24 20:03:06 2022
From: EganR at westerntc.edu (Egan, Richard)
Date: Thu, 25 Aug 2022 01:03:06 +0000
Subject: [crw-talk] COVID 19
In-Reply-To: <CAGK6+hAk8__CGT4W6wnygAv0uFH00AO=s8mAf1odyRJqehEU2g@mail.gmail.com>
References: <CAGK6+hAk8__CGT4W6wnygAv0uFH00AO=s8mAf1odyRJqehEU2g@mail.gmail.com>
Message-ID: <BN7PR03MB369920B6F48CAA4AEE8D2BDDA4729@BN7PR03MB3699.namprd03.prod.outlook.com>

Still early enough for intervention.  After 4 to 5 days antibodies not effective.

I hope your experience will be better than mine.



Sent from my Verizon, Samsung Galaxy smartphone



-------- Original message --------
From: James Bloomer <marine9096 at gmail.com>
Date: 8/24/22 7:55 PM (GMT-06:00)
To: CRW talk <crw-talk at crwoodturner.com>, Dan Larson <larsdan at luther.k12.wi.us>
Subject: [crw-talk] COVID 19

CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe.

Unfortunately COVID-19 is still a thing. I wanted to let everyone know I just tested positive. Symptoms started on Monday evening.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220825/1b70bda9/attachment.html>

From jdcrow1956 at yahoo.com  Thu Aug 25 11:40:14 2022
From: jdcrow1956 at yahoo.com (John Fisher)
Date: Thu, 25 Aug 2022 16:40:14 +0000 (UTC)
Subject: [crw-talk] COVID 19
In-Reply-To: <BN7PR03MB369920B6F48CAA4AEE8D2BDDA4729@BN7PR03MB3699.namprd03.prod.outlook.com>
References: <CAGK6+hAk8__CGT4W6wnygAv0uFH00AO=s8mAf1odyRJqehEU2g@mail.gmail.com>
	<BN7PR03MB369920B6F48CAA4AEE8D2BDDA4729@BN7PR03MB3699.namprd03.prod.outlook.com>
Message-ID: <916925123.1422956.1661445614621@mail.yahoo.com>

 So far my symptoms have not been too bad. Very tired at first and many body aches.? Every joint in my body seemed to hurt.? Mostly my back, difficult to sleep due to pain.? This seems to be waning and we are both on the mend.? I wanted to lose so weight but not this way. I am down 7 pounds.? Thanks for your concern and hope you are better also.?
    On Wednesday, August 24, 2022 at 08:03:46 PM CDT, Egan, Richard <eganr at westerntc.edu> wrote:  
 
 Still early enough for intervention.? After 4 to 5 days antibodies not effective.
I hope your experience will be better than mine.


Sent from my Verizon, Samsung Galaxy smartphone


-------- Original message --------From: James Bloomer <marine9096 at gmail.com> Date: 8/24/22 7:55 PM (GMT-06:00) To: CRW talk <crw-talk at crwoodturner.com>, Dan Larson <larsdan at luther.k12.wi.us>Subject: [crw-talk] COVID 19 
CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Unfortunately COVID-19 is still a thing. I wanted to let everyone know I just tested positive. Symptoms started on Monday evening._________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220825/d1c9042e/attachment.html>

From andrewpingree at gmail.com  Mon Aug 29 18:11:30 2022
From: andrewpingree at gmail.com (Andrew)
Date: Mon, 29 Aug 2022 18:11:30 -0500
Subject: [crw-talk] Bandsaw maintenance help
Message-ID: <CANRBiF4byRUgrhkJAVBm7MqJWa2df1rES9zf5Nn5=0-75ugSJw@mail.gmail.com>

I am wondering if anybody in the group has the capabilities of welding
aluminum. The bracket that holds the top wheel on my bandsaw has developed
a crack, and my welder will not weld aluminum.

Please let me know if you can help with this.

Thanks,
Andrew
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220829/4a173cd9/attachment.html>

From aaronagesicki at gmail.com  Mon Aug 29 18:59:30 2022
From: aaronagesicki at gmail.com (Aaron Gesicki)
Date: Mon, 29 Aug 2022 18:59:30 -0500
Subject: [crw-talk] Bandsaw maintenance help
In-Reply-To: <CANRBiF4byRUgrhkJAVBm7MqJWa2df1rES9zf5Nn5=0-75ugSJw@mail.gmail.com>
References: <CANRBiF4byRUgrhkJAVBm7MqJWa2df1rES9zf5Nn5=0-75ugSJw@mail.gmail.com>
Message-ID: <!&!AAAAAAAAAAAuAAAAAAAAABJ70/9ViIVIha+/5AXJOVABAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAACyx2YzO8g2SbOdrzFu2s+eAQAAAAA=@gmail.com>

Sorry, I can?t help with the welding. 
 
But I can opine that this may have occurred because of excessive blade tension. There have been numerous uninformed and misleading articles in woodworking magazines, including Fine Woodworking, that have endorsed this overtensioning practice. Those articles are WRONG! 
For perspective, read any of the books or articles by Mark Duginske. He even spoke about it during a CRW demonstration more than a couple years ago. He is an expert on saws, both band and table. 
 
 
Aaron Gesicki
 
 
 
From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Andrew
Sent: Monday, August 29, 2022 6:12 PM
To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. <crw-talk at crwoodturner.com>
Subject: [crw-talk] Bandsaw maintenance help
 
I am wondering if anybody in the group has the capabilities of welding aluminum. The bracket that holds the top wheel on my bandsaw has developed a crack, and my welder will not weld aluminum.
 
Please let me know if you can help with this. 
 
Thanks, 
Andrew
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220829/7adc2445/attachment.html>

From andrewpingree at gmail.com  Mon Aug 29 20:37:30 2022
From: andrewpingree at gmail.com (Andrew)
Date: Mon, 29 Aug 2022 20:37:30 -0500
Subject: [crw-talk] Bandsaw maintenance help
In-Reply-To: <!&!AAAAAAAAAAAuAAAAAAAAABJ70/9ViIVIha+/5AXJOVABAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAACyx2YzO8g2SbOdrzFu2s+eAQAAAAA=@gmail.com>
References: <CANRBiF4byRUgrhkJAVBm7MqJWa2df1rES9zf5Nn5=0-75ugSJw@mail.gmail.com>
	<!&!AAAAAAAAAAAuAAAAAAAAABJ70/9ViIVIha+/5AXJOVABAMO2jhD3dRHOtM0AqgC7tuYAAAAAAA4AABAAAACyx2YzO8g2SbOdrzFu2s+eAQAAAAA=@gmail.com>
Message-ID: <CANRBiF6hhPL8FSsogYx32763aTmMuLXUPv3TXPGXQoA2zscTgg@mail.gmail.com>

It's a used bandsaw, so I can't speak to how the guy before me set it up.
But,  I follow this guy's techniques :
https://www.thewoodworkingshows.com/instructors/alex-snodgrass/, and I am
fairly certain the tension was correct at the time of failure.



On Mon, Aug 29, 2022, 6:57 PM Aaron Gesicki <aaronagesicki at gmail.com> wrote:

> *Sorry, I can?t help with the welding. *
>
>
>
> *But I can opine that this may have occurred because of excessive blade
> tension. There have been numerous uninformed and misleading articles in
> woodworking magazines, including Fine Woodworking, that have endorsed this
> overtensioning practice. Those articles are WRONG! *
>
> *For perspective, read any of the books or articles by Mark Duginske. He
> even spoke about it during a CRW demonstration more than a couple years
> ago. He is an expert on saws, both band and table. *
>
>
>
>
>
> *Aaron Gesicki*
>
>
>
>
>
>
>
> *From:* crw-talk <crw-talk-bounces at crwoodturner.com> *On Behalf Of *Andrew
> *Sent:* Monday, August 29, 2022 6:12 PM
> *To:* Membership mailing list for the AAW Chapter Coulee Region
> Woodturners. <crw-talk at crwoodturner.com>
> *Subject:* [crw-talk] Bandsaw maintenance help
>
>
>
> I am wondering if anybody in the group has the capabilities of welding
> aluminum. The bracket that holds the top wheel on my bandsaw has developed
> a crack, and my welder will not weld aluminum.
>
>
>
> Please let me know if you can help with this.
>
>
>
> Thanks,
>
> Andrew
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220829/6b1b287e/attachment.html>

From raaschb at charter.net  Mon Aug 29 22:00:21 2022
From: raaschb at charter.net (Bob R)
Date: Mon, 29 Aug 2022 22:00:21 -0500
Subject: [crw-talk] Bandsaw maintenance help
Message-ID: <mailman.13.1661828439.364354.crw-talk_crwoodturner.com@crwoodturner.com>

Affordable Portable Welding, Holmen.

+1 608-665-2702
Bob R, Sent from my Phone
On Aug 29, 2022 8:37 PM, Andrew <andrewpingree at gmail.com> wrote:
>
> It's a used bandsaw, so I can't speak to how the guy before me set it up. But,? I follow this guy's techniques :https://www.thewoodworkingshows.com/instructors/alex-snodgrass/, and I am fairly certain the tension was correct at the time of failure.
>
>
>
> On Mon, Aug 29, 2022, 6:57 PM Aaron Gesicki <aaronagesicki at gmail.com> wrote:
>>
>> Sorry, I can?t help with the welding.
>>
>> ?
>>
>> But I can opine that this may have occurred because of excessive blade tension. There have been numerous uninformed and misleading articles in woodworking magazines, including Fine Woodworking, that have endorsed this overtensioning practice. Those articles are WRONG!
>>
>> For perspective, read any of the books or articles by Mark Duginske. He even spoke about it during a CRW demonstration more than a couple years ago. He is an expert on saws, both band and table.
>>
>> ?
>>
>> ?
>>
>> Aaron Gesicki
>>
>> ?
>>
>> ?
>>
>> ?
>>
>> From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Andrew
>> Sent: Monday, August 29, 2022 6:12 PM
>> To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. <crw-talk at crwoodturner.com>
>> Subject: [crw-talk] Bandsaw maintenance help
>>
>> ?
>>
>> I am wondering if anybody in the group has the capabilities of welding aluminum. The bracket that holds the top wheel on my bandsaw has developed a crack, and my welder will not weld aluminum.
>>
>> ?
>>
>> Please let me know if you can help with this.?
>>
>> ?
>>
>> Thanks,?
>>
>> Andrew
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220829/2a87b510/attachment.html>

From kengrunke at gmail.com  Mon Aug 29 22:01:34 2022
From: kengrunke at gmail.com (Ken Grunke)
Date: Mon, 29 Aug 2022 22:01:34 -0500
Subject: [crw-talk] Bandsaw maintenance help
In-Reply-To: <CANRBiF4byRUgrhkJAVBm7MqJWa2df1rES9zf5Nn5=0-75ugSJw@mail.gmail.com>
References: <CANRBiF4byRUgrhkJAVBm7MqJWa2df1rES9zf5Nn5=0-75ugSJw@mail.gmail.com>
Message-ID: <ec538be4-bd2d-abc0-05c4-616ed0bffe28@gmail.com>

If you thoroughly degrease mating surfaces with acetone or lacquer 
thinner, JB Weld would hold well if it can fill the crack completely. A 
mechanical connection would be advisable also, like a threaded bolt 
going across the crack.

Ken Grunke



On 8/29/22 18:11, Andrew wrote:
> I am wondering if anybody in the group has the capabilities of welding 
> aluminum. The bracket that holds the top wheel on my bandsaw has 
> developed a crack, and my welder will not weld aluminum.
>
> Please let me know if you can help with this.
>
> Thanks,
> Andrew
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220829/f42748bf/attachment.html>

From rjpatros05 at gmail.com  Mon Aug 29 23:01:39 2022
From: rjpatros05 at gmail.com (Robert Patros)
Date: Mon, 29 Aug 2022 23:01:39 -0500
Subject: [crw-talk] Bandsaw maintenance help
In-Reply-To: <CANRBiF4byRUgrhkJAVBm7MqJWa2df1rES9zf5Nn5=0-75ugSJw@mail.gmail.com>
References: <CANRBiF4byRUgrhkJAVBm7MqJWa2df1rES9zf5Nn5=0-75ugSJw@mail.gmail.com>
Message-ID: <B3321322-D6EC-45D0-AEC0-A8A83218D158@gmail.com>

Andrew,
When I need help with something like this, I usually consult with Jeff at A-Line. He?s the only one I know at figuring out the best way to fix things and knows bandsaws like the back of his hand. 
Good luck ? 
Bob

Sent from my iPhone

> On Aug 29, 2022, at 6:12 PM, Andrew <andrewpingree at gmail.com> wrote:
> 
> ?
> I am wondering if anybody in the group has the capabilities of welding aluminum. The bracket that holds the top wheel on my bandsaw has developed a crack, and my welder will not weld aluminum.
> 
> Please let me know if you can help with this. 
> 
> Thanks, 
> Andrew
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/


From andrewpingree at gmail.com  Tue Aug 30 09:37:20 2022
From: andrewpingree at gmail.com (Andrew)
Date: Tue, 30 Aug 2022 09:37:20 -0500
Subject: [crw-talk] Bandsaw maintenance help
In-Reply-To: <B3321322-D6EC-45D0-AEC0-A8A83218D158@gmail.com>
References: <CANRBiF4byRUgrhkJAVBm7MqJWa2df1rES9zf5Nn5=0-75ugSJw@mail.gmail.com>
	<B3321322-D6EC-45D0-AEC0-A8A83218D158@gmail.com>
Message-ID: <CANRBiF6dbh=AX43SK51=asrRP49KAbTXh-y3C246MqZ+Daz7Sw@mail.gmail.com>

Thanks Ken, Bob R, and Bob P. I can't really afford to hire a welder, so I
will probably go the JB Weld route. If that doesn't work, I'll talk to A
line and maybe they can source me a new part.

Thanks for the help,
Andrew

On Mon, Aug 29, 2022, 11:02 PM Robert Patros <rjpatros05 at gmail.com> wrote:

> Andrew,
> When I need help with something like this, I usually consult with Jeff at
> A-Line. He?s the only one I know at figuring out the best way to fix things
> and knows bandsaws like the back of his hand.
> Good luck ?
> Bob
>
> Sent from my iPhone
>
> > On Aug 29, 2022, at 6:12 PM, Andrew <andrewpingree at gmail.com> wrote:
> >
> > ?
> > I am wondering if anybody in the group has the capabilities of welding
> aluminum. The bracket that holds the top wheel on my bandsaw has developed
> a crack, and my welder will not weld aluminum.
> >
> > Please let me know if you can help with this.
> >
> > Thanks,
> > Andrew
> > _________________________________________
> > Use "Reply to All" or "Reply List" to reach the whole group, "Reply"
> goes only to sender.
> > ______
> > crw-talk mailing list
> > crw-talk at crwoodturner.com
> > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> > Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220830/1cfa2d47/attachment.html>

From kenearlg at gmail.com  Tue Aug 30 12:38:45 2022
From: kenearlg at gmail.com (Ken G.)
Date: Tue, 30 Aug 2022 12:38:45 -0500
Subject: [crw-talk] Bandsaw maintenance help
In-Reply-To: <CANRBiF6dbh=AX43SK51=asrRP49KAbTXh-y3C246MqZ+Daz7Sw@mail.gmail.com>
References: <CANRBiF4byRUgrhkJAVBm7MqJWa2df1rES9zf5Nn5=0-75ugSJw@mail.gmail.com>
	<B3321322-D6EC-45D0-AEC0-A8A83218D158@gmail.com>
	<CANRBiF6dbh=AX43SK51=asrRP49KAbTXh-y3C246MqZ+Daz7Sw@mail.gmail.com>
Message-ID: <4cfa8106-6f08-78d4-a3ae-ecd1eafbde99@gmail.com>

Hi Andrew, maybe we can better help if you provide a picture or three. I 
feel some misgivings about offering advice on something I haven't seen, 
plus I'm curious to see the part.

Ken


On 8/30/22 09:37, Andrew wrote:
> Thanks Ken, Bob R, and Bob P. I can't really afford to hire a welder, 
> so I will probably go the JB Weld route. If that doesn't work, I'll 
> talk to A line and maybe they can source me a new part.
>
> Thanks for the help,
> Andrew
>
> On Mon, Aug 29, 2022, 11:02 PM Robert Patros <rjpatros05 at gmail.com> wrote:
>
>     Andrew,
>     When I need help with something like this, I usually consult with
>     Jeff at A-Line. He?s the only one I know at figuring out the best
>     way to fix things and knows bandsaws like the back of his hand.
>     Good luck ?
>     Bob
>
>     Sent from my iPhone
>
>     > On Aug 29, 2022, at 6:12 PM, Andrew <andrewpingree at gmail.com> wrote:
>     >
>     > ?
>     > I am wondering if anybody in the group has the capabilities of
>     welding aluminum. The bracket that holds the top wheel on my
>     bandsaw has developed a crack, and my welder will not weld aluminum.
>     >
>     > Please let me know if you can help with this.
>     >
>     > Thanks,
>     > Andrew
>     > _________________________________________
>     > Use "Reply to All" or "Reply List" to reach the whole group,
>     "Reply" goes only to sender.
>     > ______
>     > crw-talk mailing list
>     > crw-talk at crwoodturner.com
>     > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>     > Check the archive to make sure your message was sent:
>     http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
>     _________________________________________
>     Use "Reply to All" or "Reply List" to reach the whole group,
>     "Reply" goes only to sender.
>     ______
>     crw-talk mailing list
>     crw-talk at crwoodturner.com
>     http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>     Check the archive to make sure your message was sent:
>     http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220830/c47505b0/attachment.html>

From griff at mwt.net  Tue Aug 30 14:19:26 2022
From: griff at mwt.net (John & Donna Griffiths)
Date: Tue, 30 Aug 2022 19:19:26 +0000
Subject: [crw-talk] Bandsaw maintenance help
In-Reply-To: <4cfa8106-6f08-78d4-a3ae-ecd1eafbde99@gmail.com>
References: <CANRBiF4byRUgrhkJAVBm7MqJWa2df1rES9zf5Nn5=0-75ugSJw@mail.gmail.com>
	<B3321322-D6EC-45D0-AEC0-A8A83218D158@gmail.com>
	<CANRBiF6dbh=AX43SK51=asrRP49KAbTXh-y3C246MqZ+Daz7Sw@mail.gmail.com>
	<4cfa8106-6f08-78d4-a3ae-ecd1eafbde99@gmail.com>
Message-ID: <em69f1fd5b-c51b-488d-9d96-a50c6f9bb9b0@44b5b77d.com>

I know a guy up my way who builds welded aluminum boats.  He's a retired 
pipeline welder so to do that you need to know your stuff.  He could 
probably weld up a broken cast aluminum piece.


------ Original Message ------
>From "Ken G." <kenearlg at gmail.com>
To crw-talk at crwoodturner.com
Date 8/30/2022 12:38:45 PM
Subject Re: [crw-talk] Bandsaw maintenance help

>Hi Andrew, maybe we can better help if you provide a picture or three. 
>I feel some misgivings about offering advice on something I haven't 
>seen, plus I'm curious to see the part.
>
>Ken
>
>
>
>On 8/30/22 09:37, Andrew wrote:
>>Thanks Ken, Bob R, and Bob P. I can't really afford to hire a welder, 
>>so I will probably go the JB Weld route. If that doesn't work, I'll 
>>talk to A line and maybe they can source me a new part.
>>
>>Thanks for the help,
>>Andrew
>>
>>On Mon, Aug 29, 2022, 11:02 PM Robert Patros < rjpatros05 at gmail.com> 
>>wrote:
>>>Andrew,
>>>When I need help with something like this, I usually consult with 
>>>Jeff at A-Line. He?s the only one I know at figuring out the best way 
>>>to fix things and knows bandsaws like the back of his hand.
>>>Good luck ?
>>>Bob
>>>
>>>Sent from my iPhone
>>>
>>> > On Aug 29, 2022, at 6:12 PM, Andrew <andrewpingree at gmail.com> 
>>>wrote:
>>> >
>>> > ?
>>> > I am wondering if anybody in the group has the capabilities of 
>>>welding aluminum. The bracket that holds the top wheel on my bandsaw 
>>>has developed a crack, and my welder will not weld aluminum.
>>> >
>>> > Please let me know if you can help with this.
>>> >
>>> > Thanks,
>>> > Andrew
>>> > _________________________________________
>>> > Use "Reply to All" or "Reply List" to reach the whole group, 
>>>"Reply" goes only to sender.
>>> > ______
>>> > crw-talk mailing list
>>> > crw-talk at crwoodturner.com
>>> > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>> > Check the archive to make sure your message was sent: 
>>>http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>>
>>>_________________________________________
>>>Use "Reply to All" or "Reply List" to reach the whole group, "Reply" 
>>>goes only to sender.
>>>______
>>>crw-talk mailing list
>>>crw-talk at crwoodturner.com
>>>http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>>Check the archive to make sure your message was sent: 
>>>http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>
>>_________________________________________
>>Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>>______
>>crw-talk mailing list
>>crw-talk at crwoodturner.comhttp://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220830/d4c9105c/attachment.html>

From andrewpingree at gmail.com  Tue Aug 30 19:12:30 2022
From: andrewpingree at gmail.com (Andrew)
Date: Tue, 30 Aug 2022 19:12:30 -0500
Subject: [crw-talk] Bandsaw maintenance help
In-Reply-To: <em69f1fd5b-c51b-488d-9d96-a50c6f9bb9b0@44b5b77d.com>
References: <CANRBiF4byRUgrhkJAVBm7MqJWa2df1rES9zf5Nn5=0-75ugSJw@mail.gmail.com>
	<B3321322-D6EC-45D0-AEC0-A8A83218D158@gmail.com>
	<CANRBiF6dbh=AX43SK51=asrRP49KAbTXh-y3C246MqZ+Daz7Sw@mail.gmail.com>
	<4cfa8106-6f08-78d4-a3ae-ecd1eafbde99@gmail.com>
	<em69f1fd5b-c51b-488d-9d96-a50c6f9bb9b0@44b5b77d.com>
Message-ID: <CANRBiF5vdrkjKcUPX1wQ=y92SA_u1a9HRPMhR=Hv31PFaCHH-A@mail.gmail.com>

Here are pictures of the piece. The dimensions are 7.5"x2.75"x1". The
arrows indicate the cracks. I really think welding is the preferred way to
strengthen it. But budgetary constraints will definitely decide which
method I choose.

Ken, do you think JB Weld would work here?

John, if you think your neighbor is willing and available (and affordable),
would you mind hooking me up with him?

On Tue, Aug 30, 2022, 2:20 PM John & Donna Griffiths <griff at mwt.net> wrote:

> I know a guy up my way who builds welded aluminum boats.  He's a retired
> pipeline welder so to do that you need to know your stuff.  He could
> probably weld up a broken cast aluminum piece.
>
>
> ------ Original Message ------
> From "Ken G." <kenearlg at gmail.com>
> To crw-talk at crwoodturner.com
> Date 8/30/2022 12:38:45 PM
> Subject Re: [crw-talk] Bandsaw maintenance help
>
> Hi Andrew, maybe we can better help if you provide a picture or three. I
> feel some misgivings about offering advice on something I haven't seen,
> plus I'm curious to see the part.
>
> Ken
>
>
> On 8/30/22 09:37, Andrew wrote:
>
> Thanks Ken, Bob R, and Bob P. I can't really afford to hire a welder, so I
> will probably go the JB Weld route. If that doesn't work, I'll talk to A
> line and maybe they can source me a new part.
>
> Thanks for the help,
> Andrew
>
> On Mon, Aug 29, 2022, 11:02 PM Robert Patros < rjpatros05 at gmail.com>
> wrote:
>
>> Andrew,
>> When I need help with something like this, I usually consult with Jeff at
>> A-Line. He?s the only one I know at figuring out the best way to fix things
>> and knows bandsaws like the back of his hand.
>> Good luck ?
>> Bob
>>
>> Sent from my iPhone
>>
>> > On Aug 29, 2022, at 6:12 PM, Andrew <andrewpingree at gmail.com> wrote:
>> >
>> > ?
>> > I am wondering if anybody in the group has the capabilities of welding
>> aluminum. The bracket that holds the top wheel on my bandsaw has developed
>> a crack, and my welder will not weld aluminum.
>> >
>> > Please let me know if you can help with this.
>> >
>> > Thanks,
>> > Andrew
>> > _________________________________________
>> > Use "Reply to All" or "Reply List" to reach the whole group, "Reply"
>> goes only to sender.
>> > ______
>> > crw-talk mailing list
>> > crw-talk at crwoodturner.com
>> > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> > Check the archive to make sure your message was sent:
>> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
>> only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent:
>> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing listcrw-talk at crwoodturner.comhttp://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220830/fa851320/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_20220830_190237006~3.jpg
Type: image/jpeg
Size: 340243 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220830/fa851320/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_20220830_190206210~2.jpg
Type: image/jpeg
Size: 308170 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220830/fa851320/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_20220830_190144633~2.jpg
Type: image/jpeg
Size: 2104702 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220830/fa851320/attachment-0002.jpg>

From kengrunke at gmail.com  Tue Aug 30 22:32:15 2022
From: kengrunke at gmail.com (Ken Grunke)
Date: Tue, 30 Aug 2022 22:32:15 -0500
Subject: [crw-talk] Bandsaw maintenance help
In-Reply-To: <CANRBiF5vdrkjKcUPX1wQ=y92SA_u1a9HRPMhR=Hv31PFaCHH-A@mail.gmail.com>
References: <CANRBiF4byRUgrhkJAVBm7MqJWa2df1rES9zf5Nn5=0-75ugSJw@mail.gmail.com>
	<B3321322-D6EC-45D0-AEC0-A8A83218D158@gmail.com>
	<CANRBiF6dbh=AX43SK51=asrRP49KAbTXh-y3C246MqZ+Daz7Sw@mail.gmail.com>
	<4cfa8106-6f08-78d4-a3ae-ecd1eafbde99@gmail.com>
	<em69f1fd5b-c51b-488d-9d96-a50c6f9bb9b0@44b5b77d.com>
	<CANRBiF5vdrkjKcUPX1wQ=y92SA_u1a9HRPMhR=Hv31PFaCHH-A@mail.gmail.com>
Message-ID: <e3d15216-b831-22b4-37b4-2993c07126f4@gmail.com>

Andrew, I believe welding would be the most appropriate repair. JBWeld 
isn't really made to go into cracks, it's not thin enough. If the pieces 
were completely seperated, JBWeld would work for gluing them back 
together if there wasn't a lot of stress on them. I used it to glue a 
piece onto an old vice and it held for a few years, then gave up. If the 
JBWeld on your part failed, you would have to clean it off before "real" 
welding.

Ken


On 8/30/22 19:12, Andrew wrote:
> Here are pictures of the piece. The dimensions are 7.5"x2.75"x1". The 
> arrows indicate the cracks. I really think welding is the preferred 
> way to strengthen it. But budgetary constraints will definitely decide 
> which method I choose.
>
> Ken, do you think JB Weld would work here?
>
> John, if you think your neighbor is willing and available (and 
> affordable), would you mind hooking me up with him?
>
> On Tue, Aug 30, 2022, 2:20 PM John & Donna Griffiths <griff at mwt.net> 
> wrote:
>
>     I know a guy up my way who builds welded aluminum boats.? He's a
>     retired pipeline welder so to do that you need to know your
>     stuff.? He could probably weld up a broken cast aluminum piece.
>
>
>     ------ Original Message ------
>     From "Ken G." <kenearlg at gmail.com>
>     To crw-talk at crwoodturner.com
>     Date 8/30/2022 12:38:45 PM
>     Subject Re: [crw-talk] Bandsaw maintenance help
>
>>     Hi Andrew, maybe we can better help if you provide a picture or
>>     three. I feel some misgivings about offering advice on something
>>     I haven't seen, plus I'm curious to see the part.
>>
>>     Ken
>>
>>
>>     On 8/30/22 09:37, Andrew wrote:
>>>     Thanks Ken, Bob R, and Bob P. I can't really afford to hire a
>>>     welder, so I will probably go the JB Weld route. If that doesn't
>>>     work, I'll talk to A line and maybe they can source me a new part.
>>>
>>>     Thanks for the help,
>>>     Andrew
>>>
>>>     On Mon, Aug 29, 2022, 11:02 PM Robert Patros <
>>>     rjpatros05 at gmail.com> wrote:
>>>
>>>         Andrew,
>>>         When I need help with something like this, I usually consult
>>>         with Jeff at A-Line. He?s the only one I know at figuring
>>>         out the best way to fix things and knows bandsaws like the
>>>         back of his hand.
>>>         Good luck ?
>>>         Bob
>>>
>>>         Sent from my iPhone
>>>
>>>         > On Aug 29, 2022, at 6:12 PM, Andrew
>>>         <andrewpingree at gmail.com> wrote:
>>>         >
>>>         > ?
>>>         > I am wondering if anybody in the group has the
>>>         capabilities of welding aluminum. The bracket that holds the
>>>         top wheel on my bandsaw has developed a crack, and my welder
>>>         will not weld aluminum.
>>>         >
>>>         > Please let me know if you can help with this.
>>>         >
>>>         > Thanks,
>>>         > Andrew
>>>         > _________________________________________
>>>         > Use "Reply to All" or "Reply List" to reach the whole
>>>         group, "Reply" goes only to sender.
>>>         > ______
>>>         > crw-talk mailing list
>>>         > crw-talk at crwoodturner.com
>>>         >
>>>         http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>>         > Check the archive to make sure your message was sent:
>>>         http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>>
>>>         _________________________________________
>>>         Use "Reply to All" or "Reply List" to reach the whole group,
>>>         "Reply" goes only to sender.
>>>         ______
>>>         crw-talk mailing list
>>>         crw-talk at crwoodturner.com
>>>         http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>>         Check the archive to make sure your message was sent:
>>>         http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>>
>>>
>>>     _________________________________________
>>>     Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>>>     ______
>>>     crw-talk mailing list
>>>     crw-talk at crwoodturner.com
>>>     http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>>     Check the archive to make sure your message was sent:http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>     _________________________________________
>     Use "Reply to All" or "Reply List" to reach the whole group,
>     "Reply" goes only to sender.
>     ______
>     crw-talk mailing list
>     crw-talk at crwoodturner.com
>     http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>     Check the archive to make sure your message was sent:
>     http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220830/d330746a/attachment.html>

From mogoldfish at yahoo.com  Wed Aug 31 05:19:19 2022
From: mogoldfish at yahoo.com (Kristine Clough)
Date: Wed, 31 Aug 2022 10:19:19 +0000 (UTC)
Subject: [crw-talk] Bandsaw maintenance help
In-Reply-To: <CANRBiF5vdrkjKcUPX1wQ=y92SA_u1a9HRPMhR=Hv31PFaCHH-A@mail.gmail.com>
References: <CANRBiF4byRUgrhkJAVBm7MqJWa2df1rES9zf5Nn5=0-75ugSJw@mail.gmail.com>
	<B3321322-D6EC-45D0-AEC0-A8A83218D158@gmail.com>
	<CANRBiF6dbh=AX43SK51=asrRP49KAbTXh-y3C246MqZ+Daz7Sw@mail.gmail.com>
	<4cfa8106-6f08-78d4-a3ae-ecd1eafbde99@gmail.com>
	<em69f1fd5b-c51b-488d-9d96-a50c6f9bb9b0@44b5b77d.com>
	<CANRBiF5vdrkjKcUPX1wQ=y92SA_u1a9HRPMhR=Hv31PFaCHH-A@mail.gmail.com>
Message-ID: <789168587.2217466.1661941159291@mail.yahoo.com>

Andrew, have you looked at ebay as well.? Mnay times there are people that have parted out older machines.Kris

Sent from Yahoo Mail on Android 
 
  On Tue, Aug 30, 2022 at 7:13 PM, Andrew<andrewpingree at gmail.com> wrote:   _________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220831/8ea5b878/attachment.html>

From andrewpingree at gmail.com  Wed Aug 31 11:06:04 2022
From: andrewpingree at gmail.com (Andrew)
Date: Wed, 31 Aug 2022 11:06:04 -0500
Subject: [crw-talk] Bandsaw maintenance help
In-Reply-To: <789168587.2217466.1661941159291@mail.yahoo.com>
References: <CANRBiF4byRUgrhkJAVBm7MqJWa2df1rES9zf5Nn5=0-75ugSJw@mail.gmail.com>
	<B3321322-D6EC-45D0-AEC0-A8A83218D158@gmail.com>
	<CANRBiF6dbh=AX43SK51=asrRP49KAbTXh-y3C246MqZ+Daz7Sw@mail.gmail.com>
	<4cfa8106-6f08-78d4-a3ae-ecd1eafbde99@gmail.com>
	<em69f1fd5b-c51b-488d-9d96-a50c6f9bb9b0@44b5b77d.com>
	<CANRBiF5vdrkjKcUPX1wQ=y92SA_u1a9HRPMhR=Hv31PFaCHH-A@mail.gmail.com>
	<789168587.2217466.1661941159291@mail.yahoo.com>
Message-ID: <CANRBiF6twOUsLRjxPGmfRO0Pn8K_7JipeJq1O+J_+5nYshGJPg@mail.gmail.com>

Thanks Kriss, I didn't think about ebay. I'll check if anything is there.

On Wed, Aug 31, 2022, 5:19 AM Kristine Clough <mogoldfish at yahoo.com> wrote:

> Andrew, have you looked at ebay as well.  Mnay times there are people that
> have parted out older machines.
> Kris
>
> Sent from Yahoo Mail on Android
> <https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
> On Tue, Aug 30, 2022 at 7:13 PM, Andrew
> <andrewpingree at gmail.com> wrote:
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220831/fc899230/attachment.html>

From aamethesta at aol.com  Wed Aug 31 16:36:09 2022
From: aamethesta at aol.com (Pam Day)
Date: Wed, 31 Aug 2022 21:36:09 +0000 (UTC)
Subject: [crw-talk] Flute demo
References: <825285739.2600856.1661981769811.ref@mail.yahoo.com>
Message-ID: <825285739.2600856.1661981769811@mail.yahoo.com>

Is Don Wilson the person giving the flute demonstration in Sept?? ??What items should I bring to the meeting?? ?Thanks

Sent from the all new AOL app for Android
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20220831/eb40a329/attachment.html>