From jphillips006 at centurytel.net  Mon Nov  1 11:15:16 2021
From: jphillips006 at centurytel.net (John Phillips)
Date: Mon, 1 Nov 2021 11:15:16 -0500
Subject: [crw-talk] Found inside an ash log!
In-Reply-To: <A66109ED-4EBD-410C-A000-EBCFE5C0DB66@mwt.net>
References: <A66109ED-4EBD-410C-A000-EBCFE5C0DB66@mwt.net>
Message-ID: <16255DABA9904230BC12D4F05D5AEAFD@PhillipsPC>

very nice John!

-----Original Message----- 
From: Mwt
Sent: Thursday, October 28, 2021 4:38 PM
To: crw-talk at crwoodturner.com
Subject: [crw-talk] Found inside an ash log!

Hello members, I dug an ash log about 20? long by 7? out of my shed and 
found this natural edge bowl inside it. Actually it was a very profitable 
chunk of wood, it gave up a yarn bowl, five ?6 in 1? screwdriver sets sold 
unfinished as a special order and finally this beautiful bowl.  The log had 
lain on the ground too long so was not at it?s best when I began rubbing 
bevels against it. Finished with many coats of wipe-on poly.  John




































Sent from my iPhone





_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes 
only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: 
http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ 



From rjpatros05 at gmail.com  Thu Nov  4 11:16:33 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Thu, 4 Nov 2021 11:16:33 -0500
Subject: [crw-talk] Worth wearing a face mask
Message-ID: <372D80F5-E168-46A5-9BDC-E7E0AEFB226D@gmail.com>

My face mask took a beating today. But, I didn?t. Very dry cherry burl. Bark flying everywhere. Fun!!!!

-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_6216.jpg
Type: image/jpeg
Size: 1663805 bytes
Desc: not available
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211104/0dc4b4db/attachment.jpg>
-------------- next part --------------


Sent from my iPhone

From mogoldfish at yahoo.com  Thu Nov  4 11:34:41 2021
From: mogoldfish at yahoo.com (Kristine Clough)
Date: Thu, 4 Nov 2021 16:34:41 +0000 (UTC)
Subject: [crw-talk] Worth wearing a face mask
In-Reply-To: <372D80F5-E168-46A5-9BDC-E7E0AEFB226D@gmail.com>
References: <372D80F5-E168-46A5-9BDC-E7E0AEFB226D@gmail.com>
Message-ID: <285528164.572283.1636043681073@mail.yahoo.com>

Time for super glue.?

Sent from Yahoo Mail on Android 
 
  On Thu, Nov 4, 2021 at 11:28 AM, Robert Patros<rjpatros05 at gmail.com> wrote:   My face mask took a beating today. But, I didn?t. Very dry cherry burl. Bark flying everywhere. Fun!!!!



Sent from my iPhone_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211104/ca588850/attachment.html>

From raaschb at charter.net  Thu Nov  4 11:35:17 2021
From: raaschb at charter.net (Bob Raasch)
Date: Thu, 4 Nov 2021 11:35:17 -0500
Subject: [crw-talk] Worth wearing a face mask
In-Reply-To: <372D80F5-E168-46A5-9BDC-E7E0AEFB226D@gmail.com>
References: <372D80F5-E168-46A5-9BDC-E7E0AEFB226D@gmail.com>
Message-ID: <000001d7d199$f3ae5910$db0b0b30$@charter.net>

Looking forward to seeing the finished piece.  Lots of jigsaw pieces. Nice.   A slow mo pieces flying video would be cool.

--Original Message-----
From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Robert Patros
Sent: Thursday, November 4, 2021 11:17 AM
To: crw-talk at crwoodturner.com
Subject: [crw-talk] Worth wearing a face mask

My face mask took a beating today. But, I didn?t. Very dry cherry burl. Bark flying everywhere. Fun!!!!




From rjpatros05 at gmail.com  Thu Nov  4 11:45:06 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Thu, 4 Nov 2021 11:45:06 -0500
Subject: [crw-talk] Worth wearing a face mask
In-Reply-To: <000001d7d199$f3ae5910$db0b0b30$@charter.net>
References: <000001d7d199$f3ae5910$db0b0b30$@charter.net>
Message-ID: <C2364AF8-6E37-4903-87B6-5235EBBB4B24@gmail.com>

I?ll try to finish it for the upcoming meeting. Turned it today and will sand and finish in a day or two. 

Sent from my iPhone

> On Nov 4, 2021, at 11:35 AM, Bob Raasch <raaschb at charter.net> wrote:
> 
> ?Looking forward to seeing the finished piece.  Lots of jigsaw pieces. Nice.   A slow mo pieces flying video would be cool.
> 
> --Original Message-----
> From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Robert Patros
> Sent: Thursday, November 4, 2021 11:17 AM
> To: crw-talk at crwoodturner.com
> Subject: [crw-talk] Worth wearing a face mask
> 
> My face mask took a beating today. But, I didn?t. Very dry cherry burl. Bark flying everywhere. Fun!!!!
> 
> 
> 
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/


From wisawdust at charter.net  Thu Nov  4 13:42:16 2021
From: wisawdust at charter.net (wisawdust)
Date: Thu, 04 Nov 2021 13:42:16 -0500
Subject: [crw-talk] Worth wearing a face mask
In-Reply-To: <372D80F5-E168-46A5-9BDC-E7E0AEFB226D@gmail.com>
Message-ID: <mailman.6.1636051351.152401.crw-talk_crwoodturner.com@crwoodturner.com>

Glad your facemask took the beating and not you.? Looking forward to seeing it finishedSent from my Galaxy
-------- Original message --------From: Robert Patros <rjpatros05 at gmail.com> Date: 11/4/21  11:28 AM  (GMT-06:00) To: crw-talk at crwoodturner.com Subject: [crw-talk] Worth wearing a face mask My face mask took a beating today. But, I didn?t. Very dry cherry burl. Bark flying everywhere. Fun!!!!
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211104/00c0912d/attachment.html>

From rjpatros05 at gmail.com  Thu Nov  4 13:57:06 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Thu, 4 Nov 2021 13:57:06 -0500
Subject: [crw-talk] Worth wearing a face mask
In-Reply-To: <618429aa.1c69fb81.1e273.be12SMTPIN_ADDED_MISSING@mx.google.com>
References: <618429aa.1c69fb81.1e273.be12SMTPIN_ADDED_MISSING@mx.google.com>
Message-ID: <D5E368DA-370B-4AA2-99DB-B8697EECE740@gmail.com>

Me, too!

Sent from my iPhone

> On Nov 4, 2021, at 1:42 PM, wisawdust <wisawdust at charter.net> wrote:
> 
> ?
> Glad your facemask took the beating and not you.  Looking forward to seeing it finished
> 
> 
> 
> Sent from my Galaxy
> 
> 
> -------- Original message --------
> From: Robert Patros <rjpatros05 at gmail.com>
> Date: 11/4/21 11:28 AM (GMT-06:00)
> To: crw-talk at crwoodturner.com
> Subject: [crw-talk] Worth wearing a face mask
> 
> My face mask took a beating today. But, I didn?t. Very dry cherry burl. Bark flying everywhere. Fun!!!!
> 
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211104/63825343/attachment.html>

From griff at mwt.net  Thu Nov  4 15:52:27 2021
From: griff at mwt.net (Mwt)
Date: Thu, 4 Nov 2021 15:52:27 -0500
Subject: [crw-talk] Worth wearing a face mask
In-Reply-To: <D5E368DA-370B-4AA2-99DB-B8697EECE740@gmail.com>
References: <D5E368DA-370B-4AA2-99DB-B8697EECE740@gmail.com>
Message-ID: <6A20CE1F-1756-4A0D-A2FD-EFF068BCD943@mwt.net>

Smart guy, good to get this info out. John

Sent from my iPhone

> On Nov 4, 2021, at 1:57 PM, Robert Patros <rjpatros05 at gmail.com> wrote:
> 
> ?Me, too!
> 
> Sent from my iPhone
> 
>>> On Nov 4, 2021, at 1:42 PM, wisawdust <wisawdust at charter.net> wrote:
>>> 
>> ?
>> Glad your facemask took the beating and not you.  Looking forward to seeing it finished
>> 
>> 
>> 
>> Sent from my Galaxy
>> 
>> 
>> -------- Original message --------
>> From: Robert Patros <rjpatros05 at gmail.com>
>> Date: 11/4/21 11:28 AM (GMT-06:00)
>> To: crw-talk at crwoodturner.com
>> Subject: [crw-talk] Worth wearing a face mask
>> 
>> My face mask took a beating today. But, I didn?t. Very dry cherry burl. Bark flying everywhere. Fun!!!!
>> 
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211104/842cd46b/attachment.html>

From jdcrow1956 at yahoo.com  Fri Nov  5 12:15:37 2021
From: jdcrow1956 at yahoo.com (John Fisher)
Date: Fri, 5 Nov 2021 17:15:37 +0000 (UTC)
Subject: [crw-talk] Worth wearing a face mask
In-Reply-To: <372D80F5-E168-46A5-9BDC-E7E0AEFB226D@gmail.com>
References: <372D80F5-E168-46A5-9BDC-E7E0AEFB226D@gmail.com>
Message-ID: <117828653.1630543.1636132537902@mail.yahoo.com>

 That looks more like Oak or Ash from picture.
    On Thursday, November 4, 2021, 11:28:20 AM CDT, Robert Patros <rjpatros05 at gmail.com> wrote:  
 
 My face mask took a beating today. But, I didn?t. Very dry cherry burl. Bark flying everywhere. Fun!!!!



Sent from my iPhone_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211105/6432a340/attachment.html>

From griff at mwt.net  Sat Nov  6 16:05:56 2021
From: griff at mwt.net (Mwt)
Date: Sat, 6 Nov 2021 16:05:56 -0500
Subject: [crw-talk] Meeting Notice
Message-ID: <A7DA91E0-2D83-4CBC-BF02-6FCDFA95555F@mwt.net>



-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_5119.jpg
Type: image/jpeg
Size: 106061 bytes
Desc: not available
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211106/ea2051d9/attachment.jpg>
-------------- next part --------------

Members, Good Saturday afternoon,
Holy mackerel, it is the first weekend of November already, and to make it easier for members who go out for that elusive ?thirty point buck? on Wisconsin?s opening day of deer hunting and get their full of Woodturning too, we made plans last month to have to November meeting only on the second Saturday. So, we will meet a week sooner than usual. 
(We have not heard from James that we can not use the Community Center that day so it must be OK.)
Our program will feature Adrian doing his long anticipated Basket Weave Illusion demo. It will be good so either attend in person or via Zoom and Czech it out. A reminder, Adrian is learning a new language, Czech, so if he has trouble trouble getting his point across in the King?s English, he may start speaking Czech to clarify things.
Now since the holiday season is upon us, I have been getting myself in the festive mood. Not by downing brandy or tipping the Spotted Cows, but making ornaments and have included a photo of a couple. One is a hollow bark-on ornament with a long finial, the other a birdhouse of gnarly red cedar and a cherry wood perch.  I used actual hollowing tools to make the hollowform one but confess to cheating on the birdhouse by hollowing with Forstner bits.  My bad, but I am not the least bit repentant.
See ya Saturday and safe hunting. 
John 
Sent from my iPhone

From rjpatros05 at gmail.com  Sat Nov  6 16:34:25 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Sat, 6 Nov 2021 16:34:25 -0500
Subject: [crw-talk] Meeting Notice
In-Reply-To: <A7DA91E0-2D83-4CBC-BF02-6FCDFA95555F@mwt.net>
References: <A7DA91E0-2D83-4CBC-BF02-6FCDFA95555F@mwt.net>
Message-ID: <93283E9C-295E-4DAE-8021-235184BD0A10@gmail.com>

Excellent! 

Sent from my iPhone

> On Nov 6, 2021, at 4:06 PM, Mwt <griff at mwt.net> wrote:
> 
> ?
> 
> <IMG_5119.jpg>
> 
> Members, Good Saturday afternoon,
> Holy mackerel, it is the first weekend of November already, and to make it easier for members who go out for that elusive ?thirty point buck? on Wisconsin?s opening day of deer hunting and get their full of Woodturning too, we made plans last month to have to November meeting only on the second Saturday. So, we will meet a week sooner than usual. 
> (We have not heard from James that we can not use the Community Center that day so it must be OK.)
> Our program will feature Adrian doing his long anticipated Basket Weave Illusion demo. It will be good so either attend in person or via Zoom and Czech it out. A reminder, Adrian is learning a new language, Czech, so if he has trouble trouble getting his point across in the King?s English, he may start speaking Czech to clarify things.
> Now since the holiday season is upon us, I have been getting myself in the festive mood. Not by downing brandy or tipping the Spotted Cows, but making ornaments and have included a photo of a couple. One is a hollow bark-on ornament with a long finial, the other a birdhouse of gnarly red cedar and a cherry wood perch.  I used actual hollowing tools to make the hollowform one but confess to cheating on the birdhouse by hollowing with Forstner bits.  My bad, but I am not the least bit repentant.
> See ya Saturday and safe hunting. 
> John 
> Sent from my iPhone_________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/


From raaschb at charter.net  Sat Nov  6 17:12:25 2021
From: raaschb at charter.net (Bob Raasch)
Date: Sat, 6 Nov 2021 17:12:25 -0500
Subject: [crw-talk] Meeting Notice
In-Reply-To: <93283E9C-295E-4DAE-8021-235184BD0A10@gmail.com>
References: <A7DA91E0-2D83-4CBC-BF02-6FCDFA95555F@mwt.net>
	<93283E9C-295E-4DAE-8021-235184BD0A10@gmail.com>
Message-ID: <000d01d7d35b$61ae5a60$250b0f20$@charter.net>

Nice job on the ornaments John.  I'm looking forward to the Czech language version of the basket weave. Often a little clueless in regular English, so the Czech version won't be any different for me. I'm zooming again, but look forward to f2f in the future.  
Bob  R.

-----Original Message-----
From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Robert Patros
Sent: Saturday, November 6, 2021 4:34 PM
To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. <crw-talk at crwoodturner.com>
Subject: Re: [crw-talk] Meeting Notice

Excellent! 

Sent from my iPhone

> On Nov 6, 2021, at 4:06 PM, Mwt <griff at mwt.net> wrote:
> 
> ?
> 
> <IMG_5119.jpg>
> 
> Members, Good Saturday afternoon,
> Holy mackerel, it is the first weekend of November already, and to make it easier for members who go out for that elusive ?thirty point buck? on Wisconsin?s opening day of deer hunting and get their full of Woodturning too, we made plans last month to have to November meeting only on the second Saturday. So, we will meet a week sooner than usual. 
> (We have not heard from James that we can not use the Community Center 
> that day so it must be OK.) Our program will feature Adrian doing his long anticipated Basket Weave Illusion demo. It will be good so either attend in person or via Zoom and Czech it out. A reminder, Adrian is learning a new language, Czech, so if he has trouble trouble getting his point across in the King?s English, he may start speaking Czech to clarify things.
> Now since the holiday season is upon us, I have been getting myself in the festive mood. Not by downing brandy or tipping the Spotted Cows, but making ornaments and have included a photo of a couple. One is a hollow bark-on ornament with a long finial, the other a birdhouse of gnarly red cedar and a cherry wood perch.  I used actual hollowing tools to make the hollowform one but confess to cheating on the birdhouse by hollowing with Forstner bits.  My bad, but I am not the least bit repentant.
> See ya Saturday and safe hunting. 
> John
> Sent from my iPhone_________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: 
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/

_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/



From marine9096 at gmail.com  Sun Nov  7 11:21:01 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Sun, 7 Nov 2021 11:21:01 -0600
Subject: [crw-talk] Board Meeting
Message-ID: <CAGK6+hCn9ZqY9M2nVBPmCVx=zg3sa=brCGXoJCs83Pr4Podv_g@mail.gmail.com>

We open for a Wednesday evening Zoom meeting? Discuss a couple items before
the general meeting?

-- 
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211107/3b870a89/attachment.html>

From jdcrow1956 at yahoo.com  Sun Nov  7 11:31:54 2021
From: jdcrow1956 at yahoo.com (John Fisher)
Date: Sun, 7 Nov 2021 17:31:54 +0000 (UTC)
Subject: [crw-talk] Board Meeting
In-Reply-To: <CAGK6+hCn9ZqY9M2nVBPmCVx=zg3sa=brCGXoJCs83Pr4Podv_g@mail.gmail.com>
References: <CAGK6+hCn9ZqY9M2nVBPmCVx=zg3sa=brCGXoJCs83Pr4Podv_g@mail.gmail.com>
Message-ID: <1078428994.2051397.1636306314265@mail.yahoo.com>

What time? I will assume 7:00 unless otherwise told different. 

    On Sunday, November 7, 2021, 11:21:42 AM CST, James Bloomer <marine9096 at gmail.com> wrote:  
 
 We open for a Wednesday evening Zoom meeting? Discuss a couple items before the general?meeting?

-- 
James A. Bloomer?_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211107/48d94b33/attachment.html>

From aaronagesicki at gmail.com  Sun Nov  7 11:35:35 2021
From: aaronagesicki at gmail.com (aaronagesicki at gmail.com)
Date: Sun, 7 Nov 2021 11:35:35 -0600
Subject: [crw-talk] Board Meeting
In-Reply-To: <CAGK6+hCn9ZqY9M2nVBPmCVx=zg3sa=brCGXoJCs83Pr4Podv_g@mail.gmail.com>
References: <CAGK6+hCn9ZqY9M2nVBPmCVx=zg3sa=brCGXoJCs83Pr4Podv_g@mail.gmail.com>
Message-ID: <07f701d7d3fd$dfab96b0$9f02c410$@gmail.com>

OK
 
 
Aaron Gesicki
 
 
 
From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of James Bloomer
Sent: Sunday, November 7, 2021 11:21 AM
To: CRW talk <crw-talk at crwoodturner.com>
Subject: [crw-talk] Board Meeting
 
We open for a Wednesday evening Zoom meeting? Discuss a couple items before the general meeting?

 
-- 
James A. Bloomer
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211107/0d55ddf4/attachment.html>

From marine9096 at gmail.com  Mon Nov  8 08:17:56 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Mon, 8 Nov 2021 08:17:56 -0600
Subject: [crw-talk] Board Meeting
In-Reply-To: <1078428994.2051397.1636306314265@mail.yahoo.com>
References: <CAGK6+hCn9ZqY9M2nVBPmCVx=zg3sa=brCGXoJCs83Pr4Podv_g@mail.gmail.com>
	<1078428994.2051397.1636306314265@mail.yahoo.com>
Message-ID: <CAGK6+hCHTh4o=hNzZxMeMFgbAu0ukF7FYVRVQPjwVLuN8qd5_w@mail.gmail.com>

Yes it will be at 1900(7pm)

On Sun, Nov 7, 2021, 11:33 John Fisher <jdcrow1956 at yahoo.com> wrote:

> What time? I will assume 7:00 unless otherwise told different.
>
>
> On Sunday, November 7, 2021, 11:21:42 AM CST, James Bloomer <
> marine9096 at gmail.com> wrote:
>
>
> We open for a Wednesday evening Zoom meeting? Discuss a couple items
> before the general meeting?
>
> --
> James A. Bloomer
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211108/be269f8d/attachment.html>

From mogoldfish at yahoo.com  Mon Nov  8 09:32:37 2021
From: mogoldfish at yahoo.com (Kristine Clough)
Date: Mon, 8 Nov 2021 15:32:37 +0000 (UTC)
Subject: [crw-talk] Board Meeting
In-Reply-To: <CAGK6+hCHTh4o=hNzZxMeMFgbAu0ukF7FYVRVQPjwVLuN8qd5_w@mail.gmail.com>
References: <CAGK6+hCn9ZqY9M2nVBPmCVx=zg3sa=brCGXoJCs83Pr4Podv_g@mail.gmail.com>
	<1078428994.2051397.1636306314265@mail.yahoo.com>
	<CAGK6+hCHTh4o=hNzZxMeMFgbAu0ukF7FYVRVQPjwVLuN8qd5_w@mail.gmail.com>
Message-ID: <347083212.1459369.1636385557187@mail.yahoo.com>

Yes

Sent from Yahoo Mail on Android 
 
  On Mon, Nov 8, 2021 at 8:18 AM, James Bloomer<marine9096 at gmail.com> wrote:   Yes it will be at 1900(7pm)
On Sun, Nov 7, 2021, 11:33 John Fisher <jdcrow1956 at yahoo.com> wrote:

What time? I will assume 7:00 unless otherwise told different. 

    On Sunday, November 7, 2021, 11:21:42 AM CST, James Bloomer <marine9096 at gmail.com> wrote:  
 
 We open for a Wednesday evening Zoom meeting? Discuss a couple items before the general?meeting?

-- 
James A. Bloomer?_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  _________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/

_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211108/50339eb6/attachment.html>

From griff at mwt.net  Mon Nov  8 14:08:40 2021
From: griff at mwt.net (John & Donna Griffiths)
Date: Mon, 08 Nov 2021 20:08:40 +0000
Subject: [crw-talk] Board Meeting
In-Reply-To: <347083212.1459369.1636385557187@mail.yahoo.com>
References: <CAGK6+hCn9ZqY9M2nVBPmCVx=zg3sa=brCGXoJCs83Pr4Podv_g@mail.gmail.com>
	<1078428994.2051397.1636306314265@mail.yahoo.com>
	<CAGK6+hCHTh4o=hNzZxMeMFgbAu0ukF7FYVRVQPjwVLuN8qd5_w@mail.gmail.com>
	<347083212.1459369.1636385557187@mail.yahoo.com>
Message-ID: <embbe96835-b30a-45e3-9dbe-d79ac80e4d45@johnanddonna-pc>

I'll be here, right in front of my computer Wed at 7PM, John

------ Original Message ------
From: "Kristine Clough" <mogoldfish at yahoo.com>
To: "Membership mailing list for the AAW Chapter Coulee Region 
Woodturners." <crw-talk at crwoodturner.com>; "James Bloomer" 
<marine9096 at gmail.com>
Sent: 11/8/2021 9:32:37 AM
Subject: Re: [crw-talk] Board Meeting

>Yes
>
>Sent from Yahoo Mail on Android 
><https://go.onelink.me/107872968?pid=InProduct&c=Global_Internal_YGrowth_AndroidEmailSig__AndroidUsers&af_wl=ym&af_sub1=Internal&af_sub2=Global_YGrowth&af_sub3=EmailSignature>
>
>>On Mon, Nov 8, 2021 at 8:18 AM, James Bloomer
>><marine9096 at gmail.com> wrote:
>>Yes it will be at 1900(7pm)
>>
>>On Sun, Nov 7, 2021, 11:33 John Fisher <jdcrow1956 at yahoo.com> wrote:
>>>What time? I will assume 7:00 unless otherwise told different.
>>>
>>>
>>>On Sunday, November 7, 2021, 11:21:42 AM CST, James Bloomer 
>>><marine9096 at gmail.com> wrote:
>>>
>>>
>>>We open for a Wednesday evening Zoom meeting? Discuss a couple items 
>>>before the general meeting?
>>>
>>>--
>>>James A. Bloomer
>>>
>>>_________________________________________
>>>Use "Reply to All" or "Reply List" to reach the whole group, "Reply" 
>>>goes only to sender.
>>>______
>>>crw-talk mailing list
>>>crw-talk at crwoodturner.com
>>>http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>>Check the archive to make sure your message was sent: 
>>>http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>>_________________________________________
>>>Use "Reply to All" or "Reply List" to reach the whole group, "Reply" 
>>>goes only to sender.
>>>______
>>>crw-talk mailing list
>>>crw-talk at crwoodturner.com
>>>http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>>Check the archive to make sure your message was sent: 
>>>http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>_________________________________________
>>Use "Reply to All" or "Reply List" to reach the whole group, "Reply" 
>>goes only to sender.
>>______
>>crw-talk mailing list
>>crw-talk at crwoodturner.com
>>http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>Check the archive to make sure your message was sent: 
>>http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211108/78117fdc/attachment.html>

From wisawdust at charter.net  Wed Nov 10 10:53:10 2021
From: wisawdust at charter.net (wisawdust at charter.net)
Date: Wed, 10 Nov 2021 16:53:10 +0000
Subject: [crw-talk] Two Items of Interest
Message-ID: <f720d752a14d98a7d15014d0f355e722be9aba13@webmail>

Here are two items of interest for you.
First, I will be giving a demo at A-Line this Friday (November 12)
from 9-11 on lathe tool sharpening. If you have tools which you have a
problem sharpening, bring them to the demo. Hope to see you on Friday
Second, we have talked about doing another Craft Supplies order. If
you are interesting in participating, either send me an
e-mail(wisawdust at charter.net) or bring your order to the meeting this
Saturday. For your order, I need the following information:Your name,
your phone number, your e-mail,For each item ordered, I will need the
following information: part number (from Craft Supplies Catalog or
website), description of the item, price of the item, number of pieced
and, this is important, the page number in the catalog. If we want the
items by the December meeting, we need to order by the end of
November. No money now, I will contact you with your order total. Pay
at that time. We need a minimum of $1000 to get a 10% discount and
free shipping. All items will be shipped to my place and distributed
at the December meeting.
Any questions, give me a call (608-397-9526) or e-mail.
Duane

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211110/d2c8b210/attachment.html>

From marine9096 at gmail.com  Wed Nov 10 13:15:50 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Wed, 10 Nov 2021 13:15:50 -0600
Subject: [crw-talk] Tonight meeting link
Message-ID: <CAGK6+hDfYrhnVLUJGau=ZZPhRQ3zUkJ3He1oOeohVqA+Ew3V6Q@mail.gmail.com>

Board meeting tonight at 7 pm


James Bloomer is inviting you to a scheduled Zoom meeting.

Topic: Board meeting
Time: Nov 10, 2021 07:00 PM Central Time (US and Canada)

Join Zoom Meeting
https://us02web.zoom.us/j/8076430043?pwd=ajdBSnlOUVpkcEJndnQ5TTMzQ1pQdz09

Meeting ID: 807 643 0043
Passcode: 836573
One tap mobile
+13017158592,,8076430043#,,,,*836573# US (Washington DC)
+13126266799,,8076430043#,,,,*836573# US (Chicago)

Dial by your location
        +1 301 715 8592 US (Washington DC)
        +1 312 626 6799 US (Chicago)
        +1 346 248 7799 US (Houston)
        +1 669 900 6833 US (San Jose)
        +1 929 205 6099 US (New York)
        +1 253 215 8782 US (Tacoma)
Meeting ID: 807 643 0043
Passcode: 836573
Find your local number: https://us02web.zoom.us/u/kfQHOzLdd
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211110/989f2b95/attachment.html>

From jerrymol at hotmail.com  Wed Nov 10 21:44:54 2021
From: jerrymol at hotmail.com (Jerry Molnar)
Date: Thu, 11 Nov 2021 03:44:54 +0000
Subject: [crw-talk] FW: Shopsmith
In-Reply-To: <4cbd5c0a8aa2b364a4d87ecc63854c144e93e4c4@webmail>
References: <4cbd5c0a8aa2b364a4d87ecc63854c144e93e4c4@webmail>
Message-ID: <DM6PR19MB42004060071256648076BE5DD7949@DM6PR19MB4200.namprd19.prod.outlook.com>

Duane, I tried texting Steve re. the Shopsmith but received a response that the number was incorrect.  Jerry

________________________________
From: crw-talk <crw-talk-bounces at crwoodturner.com> on behalf of wisawdust at charter.net <wisawdust at charter.net>
Sent: Saturday, October 30, 2021 8:18 AM
To: 'crw-talk at crwoodturner.com' <crw-talk at crwoodturner.com>
Subject: [crw-talk] FW: Shopsmith

I received a call yesterday from a guy in Prairie Du Chien.  He has an older Shopsmith he would like to get rid of.  I t works.  He has been using the lathe function on it primarilly.  He has 5 lathe tools (don't know which tools) and all the gear for the table saw and drill press.  Based on the picture, it could use a little cleaning up.  If you are interested, his phone number is in the attached e-mail.   The price seems right, free for pick up.

Duane


-----------------------------------------

From: "Vinnie Goombah"
To: wisawdust at charter.net
Cc:
Sent: Friday October 29 2021 6:56:09PM
Subject: Shopsmith

I have five chisels and other misc. associated with a lathe. Also the gear for the table saw and drill press. If you find a worthy individual I will give it away. Thanks
You can also text me at
608-778-2456
Steve Davison


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211111/345226be/attachment.html>

From griff at mwt.net  Thu Nov 11 14:44:56 2021
From: griff at mwt.net (Mwt)
Date: Thu, 11 Nov 2021 14:44:56 -0600
Subject: [crw-talk] Ornaments
Message-ID: <886DCBF3-DBC3-43C6-A002-F5E1EBF0BF08@mwt.net>

Greetings members, I have been on an ornament making kick lately. One is a hollowform of dogwood with walnut cap and finial. I managed to get about a 1/4?wall thickness on the sphere, pretty good for this old dog.  They will be at the Instant Gallery for Saturday?s meeting. The birdhouse ones are very weathered red cedar with very rich coloration.  John

-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_5120.jpg
Type: image/jpeg
Size: 805957 bytes
Desc: not available
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211111/56961853/attachment.jpg>
-------------- next part --------------



-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_5121.jpg
Type: image/jpeg
Size: 882751 bytes
Desc: not available
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211111/56961853/attachment-0001.jpg>
-------------- next part --------------



-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_5123.jpg
Type: image/jpeg
Size: 825525 bytes
Desc: not available
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211111/56961853/attachment-0002.jpg>
-------------- next part --------------


Sent from my iPhone

From rjpatros05 at gmail.com  Thu Nov 11 15:26:25 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Thu, 11 Nov 2021 15:26:25 -0600
Subject: [crw-talk] Ornaments
In-Reply-To: <886DCBF3-DBC3-43C6-A002-F5E1EBF0BF08@mwt.net>
References: <886DCBF3-DBC3-43C6-A002-F5E1EBF0BF08@mwt.net>
Message-ID: <7A4DD2AE-7EBC-4C10-918C-31EA98D027C1@gmail.com>

Those turned out great!! Nice job!! There will be many happy recipients, I?m sure. 

Sent from my iPhone

> On Nov 11, 2021, at 2:46 PM, Mwt <griff at mwt.net> wrote:
> 
> ?Greetings members, I have been on an ornament making kick lately. One is a hollowform of dogwood with walnut cap and finial. I managed to get about a 1/4?wall thickness on the sphere, pretty good for this old dog.  They will be at the Instant Gallery for Saturday?s meeting. The birdhouse ones are very weathered red cedar with very rich coloration.  John
> 
> <IMG_5120.jpg>
> 
> 
> 
> <IMG_5121.jpg>
> 
> 
> 
> <IMG_5123.jpg>
> 
> 
> Sent from my iPhone_________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/


From griff at mwt.net  Thu Nov 11 16:15:33 2021
From: griff at mwt.net (John & Donna Griffiths)
Date: Thu, 11 Nov 2021 22:15:33 +0000
Subject: [crw-talk] Ornaments
In-Reply-To: <7A4DD2AE-7EBC-4C10-918C-31EA98D027C1@gmail.com>
References: <886DCBF3-DBC3-43C6-A002-F5E1EBF0BF08@mwt.net>
	<7A4DD2AE-7EBC-4C10-918C-31EA98D027C1@gmail.com>
Message-ID: <emdda2231c-92d2-4804-8916-d2a5da376366@johnanddonna-pc>

Opps, used my phone to send this and I meant the sphere was Fogwood, as 
in found-on-ground wood, but the %&#$ auto correct went and changed it 
to "dogwood".  Technology!

------ Original Message ------
From: "Robert Patros" <rjpatros05 at gmail.com>
To: "Membership mailing list for the AAW Chapter Coulee Region 
Woodturners." <crw-talk at crwoodturner.com>
Sent: 11/11/2021 3:26:25 PM
Subject: Re: [crw-talk] Ornaments

>Those turned out great!! Nice job!! There will be many happy recipients, I?m sure.
>
>Sent from my iPhone
>
>>  On Nov 11, 2021, at 2:46 PM, Mwt <griff at mwt.net> wrote:
>>
>>  ?Greetings members, I have been on an ornament making kick lately. One is a hollowform of dogwood with walnut cap and finial. I managed to get about a 1/4?wall thickness on the sphere, pretty good for this old dog.  They will be at the Instant Gallery for Saturday?s meeting. The birdhouse ones are very weathered red cedar with very rich coloration.  John
>>
>>  <IMG_5120.jpg>
>>
>>
>>
>>  <IMG_5121.jpg>
>>
>>
>>
>>  <IMG_5123.jpg>
>>
>>
>>  Sent from my iPhone_________________________________________
>>  Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>>  ______
>>  crw-talk mailing list
>>crw-talk at crwoodturner.com
>>http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>  Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
>_________________________________________
>Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>______
>crw-talk mailing list
>crw-talk at crwoodturner.com
>http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/




From raaschb at charter.net  Thu Nov 11 17:00:59 2021
From: raaschb at charter.net (Bob Raasch)
Date: Thu, 11 Nov 2021 17:00:59 -0600
Subject: [crw-talk] Ornaments
In-Reply-To: <886DCBF3-DBC3-43C6-A002-F5E1EBF0BF08@mwt.net>
References: <886DCBF3-DBC3-43C6-A002-F5E1EBF0BF08@mwt.net>
Message-ID: <006a01d7d74f$fe7a86f0$fb6f94d0$@charter.net>

John,  These are very nice, I like the finial one, nice shape on the finial.  The birdhouses are precious. Good choice of wood for these weathered houses.  Bob R 

-----Original Message-----
From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Mwt
Sent: Thursday, November 11, 2021 2:45 PM
To: crw-talk at crwoodturner.com
Subject: [crw-talk] Ornaments

Greetings members, I have been on an ornament making kick lately. One is a hollowform of dogwood with walnut cap and finial. I managed to get about a 1/4?wall thickness on the sphere, pretty good for this old dog.  They will be at the Instant Gallery for Saturday?s meeting. The birdhouse ones are very weathered red cedar with very rich coloration.  John




From jdcrow1956 at yahoo.com  Fri Nov 12 09:40:58 2021
From: jdcrow1956 at yahoo.com (John Fisher)
Date: Fri, 12 Nov 2021 15:40:58 +0000 (UTC)
Subject: [crw-talk] Ornaments
In-Reply-To: <886DCBF3-DBC3-43C6-A002-F5E1EBF0BF08@mwt.net>
References: <886DCBF3-DBC3-43C6-A002-F5E1EBF0BF08@mwt.net>
Message-ID: <362001042.1104340.1636731658079@mail.yahoo.com>

 They look great.
    On Thursday, November 11, 2021, 02:46:47 PM CST, Mwt <griff at mwt.net> wrote:  
 
 Greetings members, I have been on an ornament making kick lately. One is a hollowform of dogwood with walnut cap and finial. I managed to get about a 1/4?wall thickness on the sphere, pretty good for this old dog.? They will be at the Instant Gallery for Saturday?s meeting. The birdhouse ones are very weathered red cedar with very rich coloration.? John









Sent from my iPhone_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211112/d36f4455/attachment.html>

From jerrymol at hotmail.com  Fri Nov 12 19:05:54 2021
From: jerrymol at hotmail.com (Jerry Molnar)
Date: Sat, 13 Nov 2021 01:05:54 +0000
Subject: [crw-talk] FW: Shopsmith
In-Reply-To: <DM6PR19MB42004060071256648076BE5DD7949@DM6PR19MB4200.namprd19.prod.outlook.com>
References: <4cbd5c0a8aa2b364a4d87ecc63854c144e93e4c4@webmail>
	<DM6PR19MB42004060071256648076BE5DD7949@DM6PR19MB4200.namprd19.prod.outlook.com>
Message-ID: <DM6PR19MB4200F6ED9DDD6278436AF111D7969@DM6PR19MB4200.namprd19.prod.outlook.com>

Is our next meeting on the 14th?    I've been travelling and lost track of the e-mail.   Thanks
________________________________
From: crw-talk <crw-talk-bounces at crwoodturner.com> on behalf of Jerry Molnar <jerrymol at hotmail.com>
Sent: Wednesday, November 10, 2021 9:44 PM
To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. <crw-talk at crwoodturner.com>
Subject: Re: [crw-talk] FW: Shopsmith

Duane, I tried texting Steve re. the Shopsmith but received a response that the number was incorrect.  Jerry

________________________________
From: crw-talk <crw-talk-bounces at crwoodturner.com> on behalf of wisawdust at charter.net <wisawdust at charter.net>
Sent: Saturday, October 30, 2021 8:18 AM
To: 'crw-talk at crwoodturner.com' <crw-talk at crwoodturner.com>
Subject: [crw-talk] FW: Shopsmith

I received a call yesterday from a guy in Prairie Du Chien.  He has an older Shopsmith he would like to get rid of.  I t works.  He has been using the lathe function on it primarilly.  He has 5 lathe tools (don't know which tools) and all the gear for the table saw and drill press.  Based on the picture, it could use a little cleaning up.  If you are interested, his phone number is in the attached e-mail.   The price seems right, free for pick up.

Duane


-----------------------------------------

From: "Vinnie Goombah"
To: wisawdust at charter.net
Cc:
Sent: Friday October 29 2021 6:56:09PM
Subject: Shopsmith

I have five chisels and other misc. associated with a lathe. Also the gear for the table saw and drill press. If you find a worthy individual I will give it away. Thanks
You can also text me at
608-778-2456
Steve Davison


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211113/238d2e5f/attachment.html>

From adrian.novak at charter.net  Fri Nov 12 19:29:49 2021
From: adrian.novak at charter.net (Adrian Novak)
Date: Fri, 12 Nov 2021 19:29:49 -0600
Subject: [crw-talk] FW: Shopsmith
In-Reply-To: <DM6PR19MB4200F6ED9DDD6278436AF111D7969@DM6PR19MB4200.namprd19.prod.outlook.com>
References: <4cbd5c0a8aa2b364a4d87ecc63854c144e93e4c4@webmail>
	<DM6PR19MB42004060071256648076BE5DD7949@DM6PR19MB4200.namprd19.prod.outlook.com>
Message-ID: <90809342-a563-4f30-b9ba-9e5c33ab6836@Porters-Phone-hehe>

     
 

 13th
 
 
 
   
 

 
 
>  
> On Nov 12, 2021 at 7:06 PM,  <Jerry Molnar (mailto:jerrymol at hotmail.com)>  wrote:
>  
>  
>    
>  Is our next meeting on the 14th?        I've been travelling and lost track of the e-mail.       Thanks
>  
>    
> From:  crw-talk  <crw-talk-bounces at crwoodturner.com (mailto:crw-talk-bounces at crwoodturner.com)>  on behalf of Jerry Molnar  <jerrymol at hotmail.com (mailto:jerrymol at hotmail.com)>
>   Sent:  Wednesday, November 10, 2021 9:44 PM
>   To:  Membership mailing list for the AAW Chapter Coulee Region Woodturners.  <crw-talk at crwoodturner.com (mailto:crw-talk at crwoodturner.com)>
>   Subject:  Re: [crw-talk] FW: Shopsmith  
>  
>  
>  
>  
>  Duane, I tried texting Steve re. the Shopsmith but received a response that the number was incorrect.    Jerry
>  
>  
>
>  
>  
>    
> From:  crw-talk  <crw-talk-bounces at crwoodturner.com (mailto:crw-talk-bounces at crwoodturner.com)>  on behalf of  wisawdust at charter.net (mailto:wisawdust at charter.net)   <wisawdust at charter.net (mailto:wisawdust at charter.net)>
>   Sent:  Saturday, October 30, 2021 8:18 AM
>   To:  'crw-talk at crwoodturner.com (mailto:crw-talk at crwoodturner.com)'  <crw-talk at crwoodturner.com (mailto:crw-talk at crwoodturner.com)>
>   Subject:  [crw-talk] FW: Shopsmith  
>  
>  
>  
> I received a call yesterday from a guy in Prairie Du Chien.    He has an older Shopsmith he would like to get rid of.    I t works.    He has been using the lathe function on it primarilly.    He has 5 lathe tools (don't know which tools) and all the gear for the table saw and drill press.    Based on the picture, it could use a little cleaning up.    If you are interested, his phone number is in the attached e-mail.       The price seems right, free for pick up.      
>
>  
> Duane
>  
>  
>
>  
>
>  -----------------------------------------
>
>  From: "Vinnie Goombah"
>  To:  wisawdust at charter.net (mailto:wisawdust at charter.net)
>  Cc:
>  Sent: Friday October 29 2021 6:56:09PM
>  Subject: Shopsmith
>  
>  I have five chisels and other misc. associated with a lathe. Also the gear for the table saw and drill press. If you find a worthy individual I will give it away. Thanks
>  You can also text me at
>   608-778-2456 (tel:608-778-2456)
>  Steve Davison
>  
>  
>                      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211112/1ca11050/attachment.html>

From adrian.novak at charter.net  Fri Nov 12 19:31:28 2021
From: adrian.novak at charter.net (Adrian Novak)
Date: Fri, 12 Nov 2021 19:31:28 -0600
Subject: [crw-talk] FW: Shopsmith
In-Reply-To: <DM6PR19MB4200F6ED9DDD6278436AF111D7969@DM6PR19MB4200.namprd19.prod.outlook.com>
References: <4cbd5c0a8aa2b364a4d87ecc63854c144e93e4c4@webmail>
	<DM6PR19MB42004060071256648076BE5DD7949@DM6PR19MB4200.namprd19.prod.outlook.com>
Message-ID: <7dc55468-006e-472b-a15c-42726ae28bc9@Porters-Phone-hehe>

     
 

 Meeting is tomorrow Saturday 13th
 
 
 
   
 

 
 
>  
> On Nov 12, 2021 at 7:06 PM,  <Jerry Molnar (mailto:jerrymol at hotmail.com)>  wrote:
>  
>  
>    
>  Is our next meeting on the 14th?        I've been travelling and lost track of the e-mail.       Thanks
>  
>    
> From:  crw-talk  <crw-talk-bounces at crwoodturner.com (mailto:crw-talk-bounces at crwoodturner.com)>  on behalf of Jerry Molnar  <jerrymol at hotmail.com (mailto:jerrymol at hotmail.com)>
>   Sent:  Wednesday, November 10, 2021 9:44 PM
>   To:  Membership mailing list for the AAW Chapter Coulee Region Woodturners.  <crw-talk at crwoodturner.com (mailto:crw-talk at crwoodturner.com)>
>   Subject:  Re: [crw-talk] FW: Shopsmith  
>  
>  
>  
>  
>  Duane, I tried texting Steve re. the Shopsmith but received a response that the number was incorrect.    Jerry
>  
>  
>
>  
>  
>    
> From:  crw-talk  <crw-talk-bounces at crwoodturner.com (mailto:crw-talk-bounces at crwoodturner.com)>  on behalf of  wisawdust at charter.net (mailto:wisawdust at charter.net)   <wisawdust at charter.net (mailto:wisawdust at charter.net)>
>   Sent:  Saturday, October 30, 2021 8:18 AM
>   To:  'crw-talk at crwoodturner.com (mailto:crw-talk at crwoodturner.com)'  <crw-talk at crwoodturner.com (mailto:crw-talk at crwoodturner.com)>
>   Subject:  [crw-talk] FW: Shopsmith  
>  
>  
>  
> I received a call yesterday from a guy in Prairie Du Chien.    He has an older Shopsmith he would like to get rid of.    I t works.    He has been using the lathe function on it primarilly.    He has 5 lathe tools (don't know which tools) and all the gear for the table saw and drill press.    Based on the picture, it could use a little cleaning up.    If you are interested, his phone number is in the attached e-mail.       The price seems right, free for pick up.      
>
>  
> Duane
>  
>  
>
>  
>
>  -----------------------------------------
>
>  From: "Vinnie Goombah"
>  To:  wisawdust at charter.net (mailto:wisawdust at charter.net)
>  Cc:
>  Sent: Friday October 29 2021 6:56:09PM
>  Subject: Shopsmith
>  
>  I have five chisels and other misc. associated with a lathe. Also the gear for the table saw and drill press. If you find a worthy individual I will give it away. Thanks
>  You can also text me at
>   608-778-2456 (tel:608-778-2456)
>  Steve Davison
>  
>  
>                      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211112/b34c5910/attachment.html>

From marine9096 at gmail.com  Fri Nov 12 20:46:16 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Fri, 12 Nov 2021 20:46:16 -0600
Subject: [crw-talk] FW: Shopsmith
In-Reply-To: <DM6PR19MB4200F6ED9DDD6278436AF111D7969@DM6PR19MB4200.namprd19.prod.outlook.com>
References: <4cbd5c0a8aa2b364a4d87ecc63854c144e93e4c4@webmail>
	<DM6PR19MB42004060071256648076BE5DD7949@DM6PR19MB4200.namprd19.prod.outlook.com>
	<DM6PR19MB4200F6ED9DDD6278436AF111D7969@DM6PR19MB4200.namprd19.prod.outlook.com>
Message-ID: <CAGK6+hA57=g_iJxC6UaonKLD_9LJvF+WND=hfgRJ=HjMnbgPjg@mail.gmail.com>

Yes, This month was moved up due to opening of gun deer is next weekend

On Fri, Nov 12, 2021 at 7:06 PM Jerry Molnar <jerrymol at hotmail.com> wrote:

> Is our next meeting on the 14th?    I've been travelling and lost track of
> the e-mail.   Thanks
> ------------------------------
> *From:* crw-talk <crw-talk-bounces at crwoodturner.com> on behalf of Jerry
> Molnar <jerrymol at hotmail.com>
> *Sent:* Wednesday, November 10, 2021 9:44 PM
> *To:* Membership mailing list for the AAW Chapter Coulee Region
> Woodturners. <crw-talk at crwoodturner.com>
> *Subject:* Re: [crw-talk] FW: Shopsmith
>
> Duane, I tried texting Steve re. the Shopsmith but received a response
> that the number was incorrect.  Jerry
>
> ------------------------------
> *From:* crw-talk <crw-talk-bounces at crwoodturner.com> on behalf of
> wisawdust at charter.net <wisawdust at charter.net>
> *Sent:* Saturday, October 30, 2021 8:18 AM
> *To:* 'crw-talk at crwoodturner.com' <crw-talk at crwoodturner.com>
> *Subject:* [crw-talk] FW: Shopsmith
>
> I received a call yesterday from a guy in Prairie Du Chien.  He has an
> older Shopsmith he would like to get rid of.  I t works.  He has been using
> the lathe function on it primarilly.  He has 5 lathe tools (don't know
> which tools) and all the gear for the table saw and drill press.  Based on
> the picture, it could use a little cleaning up.  If you are interested, his
> phone number is in the attached e-mail.   The price seems right, free for
> pick up.
>
> Duane
>
> -----------------------------------------
> From: "Vinnie Goombah"
> To: wisawdust at charter.net
> Cc:
> Sent: Friday October 29 2021 6:56:09PM
> Subject: Shopsmith
>
> I have five chisels and other misc. associated with a lathe. Also the gear
> for the table saw and drill press. If you find a worthy individual I will
> give it away. Thanks
> You can also text me at
> 608-778-2456
> Steve Davison
>
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>


-- 
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211112/dc17a33d/attachment.html>

From marine9096 at gmail.com  Fri Nov 12 20:47:41 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Fri, 12 Nov 2021 20:47:41 -0600
Subject: [crw-talk] meeting link
Message-ID: <CAGK6+hDUHXvZqQPeEk3CiKR3spJN67-k9iftUTe7vPYw3fz1+Q@mail.gmail.com>

Start Time 0900



James Bloomer is inviting you to a scheduled Zoom meeting.

Topic: CRW General Meeting
Time: Nov 13, 2021 09:00 AM Central Time (US and Canada)

Join Zoom Meeting
https://us02web.zoom.us/j/8076430043?pwd=ajdBSnlOUVpkcEJndnQ5TTMzQ1pQdz09

Meeting ID: 807 643 0043
Passcode: 836573
One tap mobile
+13126266799,,8076430043#,,,,*836573# US (Chicago)
+19292056099,,8076430043#,,,,*836573# US (New York)

Dial by your location
        +1 312 626 6799 US (Chicago)
        +1 929 205 6099 US (New York)
        +1 301 715 8592 US (Washington DC)
        +1 346 248 7799 US (Houston)
        +1 669 900 6833 US (San Jose)
        +1 253 215 8782 US (Tacoma)
Meeting ID: 807 643 0043
Passcode: 836573
Find your local number: https://us02web.zoom.us/u/kfQHOzLdd

-- 
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211112/66d13f51/attachment.html>

From mogoldfish at yahoo.com  Mon Nov 15 12:50:24 2021
From: mogoldfish at yahoo.com (Kristine Clough)
Date: Mon, 15 Nov 2021 18:50:24 +0000 (UTC)
Subject: [crw-talk] Fw: Donations
In-Reply-To: <CABh5LNjUY-cbYnyYgfHz10pSEHj6PeM0wudCiYjWSsuWPgBYbw@mail.gmail.com>
References: <1233619387.497451.1636838682868.ref@mail.yahoo.com>
	<1233619387.497451.1636838682868@mail.yahoo.com>
	<CABh5LNjUY-cbYnyYgfHz10pSEHj6PeM0wudCiYjWSsuWPgBYbw@mail.gmail.com>
Message-ID: <1639718012.895323.1637002224972@mail.yahoo.com>

Marv,? please see the email below for contact info for the North American Squirrel Association.?
Kris

Sent from Yahoo Mail on Android 
 
   ----- Forwarded Message ----- From: "George Wilson" <midnightvision at gmail.com> To: "Kristine Clough" <mogoldfish at yahoo.com> Cc:  Sent: Mon, Nov 15, 2021 at 5:49 AM Subject: Re: Donations  Greetings Kristina,
Yes I would be the best person to contact in regards to your donation
of the duck calls.
I am the current president of nasa, and am very appreciative of you
and your associations donation of the duck calls.
Please contact me by phone at the number below, and we can discuss the
best way for you to get the calls to me.

Thanks so much for your donation, and it is folks like you and your
association that keeps nasa doing the things that we do.
 Without your generosity and support, we could not carryout our
mission statement of helping disabled individuals back to enjoying the
outdoors.

Kristina, I look forward to speaking with you, and thanks again for
your very generous donation.

Best Regards,
nasa president George Wilson
Ph: (608)433-4071
NASA Email: president.nasasquirrel at gmail.com
Personal Email: midnightvision at gmail.com? ? <div
id="DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2"><br />
<table style="border-top: 1px solid #D3D4DE;">
??? <tr>
? ? ? ? <td style="width: 55px; padding-top: 13px;"><a
href="https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon"
target="_blank"><img
src="https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif"
alt="" width="46" height="29" style="width: 46px; height: 29px;"
/></a></td>
??? ??? <td style="width: 470px; padding-top: 12px; color: #41424e;
font-size: 13px; font-family: Arial, Helvetica, sans-serif;
line-height: 18px;">Virus-free. <a
href="https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link"
target="_blank" style="color: #4453ea;">www.avast.com</a>
??? ??? </td>
??? </tr>
</table><a href="#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2" width="1"
height="1"></a></div>

On 11/13/21, Kristine Clough <mogoldfish at yahoo.com> wrote:
> Hi George,
> I am a member of the Coulee Region Woodturners. In the past, one of our
> members, Jim Frank has organized donations for the North American Squirrel
> Association.? ?I recently had another member approach me about a donation of
> some duck calls to NASA but didn't know who to contact.? Are you the best
> person to contact or could you direct me to that person?
> Sincerely,
> Kris CloughCoulee Region Woodturners
>
> Sent from Yahoo Mail on Android


-- 
George Wilson.? Ph: (608) 433-4071.
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211115/c8af4561/attachment.html>

From gardens53581 at gmail.com  Tue Nov 16 09:29:36 2021
From: gardens53581 at gmail.com (Ken Nancy)
Date: Tue, 16 Nov 2021 09:29:36 -0600
Subject: [crw-talk] meeting link
In-Reply-To: <CAGK6+hDUHXvZqQPeEk3CiKR3spJN67-k9iftUTe7vPYw3fz1+Q@mail.gmail.com>
References: <CAGK6+hDUHXvZqQPeEk3CiKR3spJN67-k9iftUTe7vPYw3fz1+Q@mail.gmail.com>
Message-ID: <CALyPebcy66UZf0PyK8qhG8LBYE7y+yVoOut_mCPFx9oFk9tPOQ@mail.gmail.com>

Are we meeting live as well as zoom?   Ken Garden   Sorry to be a bother, I
am planning to be there Saturday if we meet in person.

On Fri, Nov 12, 2021 at 8:48 PM James Bloomer <marine9096 at gmail.com> wrote:

> Start Time 0900
>
>
>
> James Bloomer is inviting you to a scheduled Zoom meeting.
>
> Topic: CRW General Meeting
> Time: Nov 13, 2021 09:00 AM Central Time (US and Canada)
>
> Join Zoom Meeting
> https://us02web.zoom.us/j/8076430043?pwd=ajdBSnlOUVpkcEJndnQ5TTMzQ1pQdz09
>
> Meeting ID: 807 643 0043
> Passcode: 836573
> One tap mobile
> +13126266799,,8076430043#,,,,*836573# US (Chicago)
> +19292056099,,8076430043#,,,,*836573# US (New York)
>
> Dial by your location
>         +1 312 626 6799 US (Chicago)
>         +1 929 205 6099 US (New York)
>         +1 301 715 8592 US (Washington DC)
>         +1 346 248 7799 US (Houston)
>         +1 669 900 6833 US (San Jose)
>         +1 253 215 8782 US (Tacoma)
> Meeting ID: 807 643 0043
> Passcode: 836573
> Find your local number: https://us02web.zoom.us/u/kfQHOzLdd
>
> --
> James A. Bloomer
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211116/202e22f0/attachment.html>

From mogoldfish at yahoo.com  Tue Nov 16 09:34:53 2021
From: mogoldfish at yahoo.com (Kristine Clough)
Date: Tue, 16 Nov 2021 15:34:53 +0000 (UTC)
Subject: [crw-talk] meeting link
In-Reply-To: <CALyPebcy66UZf0PyK8qhG8LBYE7y+yVoOut_mCPFx9oFk9tPOQ@mail.gmail.com>
References: <CAGK6+hDUHXvZqQPeEk3CiKR3spJN67-k9iftUTe7vPYw3fz1+Q@mail.gmail.com>
	<CALyPebcy66UZf0PyK8qhG8LBYE7y+yVoOut_mCPFx9oFk9tPOQ@mail.gmail.com>
Message-ID: <2050483666.1158700.1637076893024@mail.yahoo.com>

Ken, yes we are meeting in person as well as online.? However, we had moved up our November meeting due to opening day of WI gun deer season.? Our next meeting is Dec 18th and will be a potluck.
Thanks,
Kris CloughSecretary?

Sent from Yahoo Mail on Android 
 
  On Tue, Nov 16, 2021 at 9:30 AM, Ken Nancy<gardens53581 at gmail.com> wrote:   _________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211116/f43cc65c/attachment.html>

From wisawdust at charter.net  Tue Nov 16 09:47:29 2021
From: wisawdust at charter.net (wisawdust)
Date: Tue, 16 Nov 2021 09:47:29 -0600
Subject: [crw-talk] meeting link
In-Reply-To: <CALyPebcy66UZf0PyK8qhG8LBYE7y+yVoOut_mCPFx9oFk9tPOQ@mail.gmail.com>
Message-ID: <mailman.0.1637077662.601495.crw-talk_crwoodturner.com@crwoodturner.com>

We met this last Saturday due to deer huntingSent from my Galaxy
-------- Original message --------From: Ken Nancy <gardens53581 at gmail.com> Date: 11/16/21  9:32 AM  (GMT-06:00) To: "Membership mailing list for the AAW Chapter Coulee Region Woodturners." <crw-talk at crwoodturner.com> Subject: Re: [crw-talk] meeting link Are we meeting live as well as zoom?? ?Ken Garden? ?Sorry to be a bother, I am planning to be there Saturday?if we meet in person.On Fri, Nov 12, 2021 at 8:48 PM James Bloomer <marine9096 at gmail.com> wrote:Start Time 0900James Bloomer is inviting you to a scheduled Zoom meeting.Topic: CRW General MeetingTime: Nov 13, 2021 09:00 AM Central Time (US and Canada)Join Zoom Meetinghttps://us02web.zoom.us/j/8076430043?pwd=ajdBSnlOUVpkcEJndnQ5TTMzQ1pQdz09Meeting ID: 807 643 0043Passcode: 836573One tap mobile+13126266799,,8076430043#,,,,*836573# US (Chicago)+19292056099,,8076430043#,,,,*836573# US (New York)Dial by your location? ? ? ? +1 312 626 6799 US (Chicago)? ? ? ? +1 929 205 6099 US (New York)? ? ? ? +1 301 715 8592 US (Washington DC)? ? ? ? +1 346 248 7799 US (Houston)? ? ? ? +1 669 900 6833 US (San Jose)? ? ? ? +1 253 215 8782 US (Tacoma)Meeting ID: 807 643 0043Passcode: 836573Find your local number: https://us02web.zoom.us/u/kfQHOzLdd-- James A. Bloomer
?
_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211116/bbd9cf6b/attachment.html>

From rjpatros05 at gmail.com  Tue Nov 16 23:00:16 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Tue, 16 Nov 2021 23:00:16 -0600
Subject: [crw-talk] Fwd: Wig stand plans
References: <3892751D-2A17-4D14-A3F4-F8CB18FAB704@gmail.com>
Message-ID: <C34DD6E8-0E72-43E8-9E4B-D2B3D8C89DD6@gmail.com>

At our meeting Saturday, John mentioned an upcoming challenge. Wig stands. Please see the attachment below. I found these online. I have the top done and am working on the rest. Pretty straightforward. Nice project. 

Sent from my iPhone

Begin forwarded message:

> From: Robert Patros <rjpatros05 at gmail.com>
> Date: November 14, 2021 at 12:36:52 PM CST
> To: rjpatros05 at gmail.com
> Subject: Wig stand plans
> 
> ?
> https://wgo.ca/Documents/Projects/WigStand.pdf
> 
> Shared via the Google app
> 
> 
> Sent from my iPhone
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211116/6c779b35/attachment.html>

From griff at mwt.net  Wed Nov 17 09:55:45 2021
From: griff at mwt.net (John & Donna Griffiths)
Date: Wed, 17 Nov 2021 15:55:45 +0000
Subject: [crw-talk] Fwd: Wig stand plans
In-Reply-To: <C34DD6E8-0E72-43E8-9E4B-D2B3D8C89DD6@gmail.com>
References: <3892751D-2A17-4D14-A3F4-F8CB18FAB704@gmail.com>
	<C34DD6E8-0E72-43E8-9E4B-D2B3D8C89DD6@gmail.com>
Message-ID: <ema7c68199-0468-40fa-8c83-d93fb618f985@johnanddonna-pc>

Members,

Bob Patros, thanks for the forward of the wig stand plans, they seem 
pretty simple.  I printed out a set because even I can follow directions 
enough to pull something like this off.  John Fisher brought up a great 
way to kick off such a club project would be a challenge.  Bob Raasch 
will speak with the cancer treatment folks at Gundersen about whether 
they would be open to receiving them.  If anyone has connections at Mayo 
or the Cancer Society, let the board know.  I envision this being a 
project that will be started as a challenge and evolving into an ongoing 
mission for the club.

Do any members have access to some decent hardwood timber?  Maple or 
ash.  Elm, poplar, box elder or oak.  Or other hardwoods that might be 
laying in someone's shed.  We don't need expensive woods like cherry or 
walnut, no burls required, no exotics, just functional woods that can be 
turned into pleasing shapes.  Just some 2 or 21/2" by 6" and some 1 1/2" 
by 1 1/2" pieces about 10-12" long.  Pretty dry of course.

I foresee us receiving donations of wood and giving sets of blanks to 
members to turn into the stands which would be displayed at meetings and 
then donated.

A shout out is due for Pam Day, one of our newer members for this idea.  
Three cheers, Pam.  Pam.  Pam.

When I have more time, I am going to dig through the piles of my 
lifetime supply of wood to see what I can come up with.  I think I have 
some stuff that can be sawn into blanks and made into stands.  Nothin' 
fancy, some ash and box elder but serviceable.  A note in the directions 
Bob Patros sent along mentions finishes, sounds like polyurethane is the 
best for durability, being impervious to the chemicals used in the wigs 
or their cleaning and more importantly, avoiding toxicity.

Please consider volunteering,whether it is donating blanks, turning the 
stands or other aspects of such a project.

John

------ Original Message ------
From: "Robert Patros" <rjpatros05 at gmail.com>
To: crw-talk at crwoodturner.com
Sent: 11/16/2021 11:00:16 PM
Subject: [crw-talk] Fwd: Wig stand plans

>At our meeting Saturday, John mentioned an upcoming challenge. Wig 
>stands. Please see the attachment below. I found these online. I have 
>the top done and am working on the rest. Pretty straightforward. Nice 
>project.
>
>Sent from my iPhone
>
>Begin forwarded message:
>
>>From: Robert Patros <rjpatros05 at gmail.com>
>>Date: November 14, 2021 at 12:36:52 PM CST
>>To:rjpatros05 at gmail.com
>>Subject:Wig stand plans
>>
>>?
>>https://wgo.ca/Documents/Projects/WigStand.pdf
>>
>>Shared via the Google app 
>><https://itunes.apple.com/app/google/id284815942>
>>
>>
>>Sent from my iPhone
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211117/f397acb8/attachment.html>

From marine9096 at gmail.com  Wed Nov 17 10:28:54 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Wed, 17 Nov 2021 10:28:54 -0600
Subject: [crw-talk] Luther Demo
Message-ID: <CAGK6+hBpCOo+j8_K0ZHFpOoZ=3sTLB9uHTae72OSB=1DgNy1Og@mail.gmail.com>

Good morning, the Demo at Luther High is fast approaching. I am reaching
out for anyone to attend and demo.
I also would like anyone that can let us display their show pieces to
highlight the various forms this craft can be done.

To date I have the following demonstrators
Myself
Aaron G
Duane

a few reminders;
-It is bring your own lathe and turning stock... We still have 2 club
lathes we can bring so if you can come but need a lathe, let us know
-If you're going to let us display a show piece, contact me so we can
arrange pick up and drop off.
-Feel free to bring different tools/material to show the multitude of
options
-if you have american woodturner magazines bring those as well.

If you can come and demo reply to this email with your name, what you're
wanting to demo and if you're bringing a lathe or need us to bring a club
lathe.

The Demo is on the 23rd
We will arrive at Luther at 1130 to offload equipment
12-1 is set up and finalize
1-3 is the intro, demo and questions



-- 
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211117/fd03c3ad/attachment.html>

From wisawdust at charter.net  Wed Nov 17 13:21:33 2021
From: wisawdust at charter.net (wisawdust)
Date: Wed, 17 Nov 2021 13:21:33 -0600
Subject: [crw-talk] Luther Demo
In-Reply-To: <CAGK6+hBpCOo+j8_K0ZHFpOoZ=3sTLB9uHTae72OSB=1DgNy1Og@mail.gmail.com>
Message-ID: <mailman.1.1637176906.601495.crw-talk_crwoodturner.com@crwoodturner.com>

Jim, I will demo, bring my lathe and a few show pieces.? I am doing basic bowls.DuaneSent from my Galaxy
-------- Original message --------From: James Bloomer <marine9096 at gmail.com> Date: 11/17/21  10:29 AM  (GMT-06:00) To: CRW talk <crw-talk at crwoodturner.com> Subject: [crw-talk] Luther Demo Good morning, the Demo at Luther High is fast approaching. I am reaching out for anyone to attend and demo.?I also would like anyone that can let us display their show pieces to highlight the various forms this craft can be done.?To date I have the following demonstratorsMyselfAaron GDuanea few reminders;-It is bring your own lathe and turning stock... We still have 2 club lathes we can bring so if you can come but need a lathe, let us know-If you're going to let us display a show piece, contact me so we can arrange pick up and drop off.-Feel free to bring different tools/material to show the multitude of options??-if you have american woodturner magazines bring those as well.?If you can come and demo reply to this email with your name, what you're wanting to demo and if you're bringing a lathe or need us to bring a club lathe.?The Demo is on the 23rdWe will arrive at Luther at 1130 to offload equipment12-1 is set up and finalize?1-3 is the intro, demo and questions-- James A. Bloomer
?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211117/243f3317/attachment.html>

From aaronagesicki at gmail.com  Wed Nov 17 13:28:36 2021
From: aaronagesicki at gmail.com (aaronagesicki at gmail.com)
Date: Wed, 17 Nov 2021 13:28:36 -0600
Subject: [crw-talk] Luther Demo
In-Reply-To: <61955709.1c69fb81.d78ea.bf08SMTPIN_ADDED_MISSING@mx.google.com>
References: <CAGK6+hBpCOo+j8_K0ZHFpOoZ=3sTLB9uHTae72OSB=1DgNy1Og@mail.gmail.com>
	<61955709.1c69fb81.d78ea.bf08SMTPIN_ADDED_MISSING@mx.google.com>
Message-ID: <0a9301d7dbe9$52241bc0$f66c5340$@gmail.com>

I?m making tops. 
 
 
Aaron Gesicki
 
 
 
From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of wisawdust
Sent: Wednesday, November 17, 2021 1:22 PM
To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. <crw-talk at crwoodturner.com>
Subject: Re: [crw-talk] Luther Demo
 
Jim, I will demo, bring my lathe and a few show pieces.  I am doing basic bowls.
 
Duane
 
 
 
Sent from my Galaxy
 
 
-------- Original message --------
From: James Bloomer <marine9096 at gmail.com <mailto:marine9096 at gmail.com> > 
Date: 11/17/21 10:29 AM (GMT-06:00) 
To: CRW talk <crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> > 
Subject: [crw-talk] Luther Demo 
 
Good morning, the Demo at Luther High is fast approaching. I am reaching out for anyone to attend and demo. 
I also would like anyone that can let us display their show pieces to highlight the various forms this craft can be done. 
 
To date I have the following demonstrators
Myself
Aaron G
Duane
 
a few reminders;
-It is bring your own lathe and turning stock... We still have 2 club lathes we can bring so if you can come but need a lathe, let us know
-If you're going to let us display a show piece, contact me so we can arrange pick up and drop off.
-Feel free to bring different tools/material to show the multitude of options  
-if you have american woodturner magazines bring those as well. 
 
If you can come and demo reply to this email with your name, what you're wanting to demo and if you're bringing a lathe or need us to bring a club lathe. 
 
The Demo is on the 23rd
We will arrive at Luther at 1130 to offload equipment
12-1 is set up and finalize 
1-3 is the intro, demo and questions
 
 
 
-- 
James A. Bloomer
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211117/09502941/attachment.html>

From wziegler at tds.net  Wed Nov 17 15:15:54 2021
From: wziegler at tds.net (wziegler at tds.net)
Date: Wed, 17 Nov 2021 16:15:54 -0500 (EST)
Subject: [crw-talk] Fwd: Wig stand plans
In-Reply-To: <ema7c68199-0468-40fa-8c83-d93fb618f985@johnanddonna-pc>
References: <3892751D-2A17-4D14-A3F4-F8CB18FAB704@gmail.com>
	<C34DD6E8-0E72-43E8-9E4B-D2B3D8C89DD6@gmail.com>
	<ema7c68199-0468-40fa-8c83-d93fb618f985@johnanddonna-pc>
Message-ID: <1982158316.5759694.1637183754616.JavaMail.zimbra@tds.net>

Hi John, 
Wendell here. 
I have plans to bring a lot of smaller turning blanks. A LOT OF PIECES, ALL DRY READY TO TURN. A lot of them would be a good size for what you are referring to. I also will bring some smaller burly pieces , and maybe some larger stock. 
I don't do much turning anymore and I feel the club has rewarded me many times over. 
So for a price, I may ask for a membership for next year. Will talk about it when I bring the stock. Most likely the December meet. 

Wendell 

----- Original Message -----

From: "John & Donna Griffiths" <griff at mwt.net> 
To: "Membership mailing list for the AAW Chapter Coulee Region Woodturners." <crw-talk at crwoodturner.com>, "Membership mailing list for the AAW Chapter Coulee RegionWoodturners." <crw-talk at crwoodturner.com> 
Sent: Wednesday, November 17, 2021 9:55:45 AM 
Subject: Re: [crw-talk] Fwd: Wig stand plans 

Members, 
Bob Patros , thanks for the forward of the wig stand plans, they seem pretty simple. I printed out a set because even I can follow directions enough to pull something like this off. John Fisher brought up a great way to kick off such a club project would be a challenge. Bob Raasch will speak with the cancer treatment folks at Gundersen about whether they would be open to receiving them. If anyone has connections at Mayo or the Cancer Society, let the board know. I envision this being a project that will be started as a challenge and evolving into an ongoing mission for the club. 

Do any members have access to some decent hardwood timber? Maple or ash. Elm, poplar, box elder or oak. Or other hardwoods that might be laying in someone's shed. We don't need expensive woods like cherry or walnut, no burls required, no exotics, just functional woods that can be turned into pleasing shapes. Just some 2 or 21/2" by 6" and some 1 1/2" by 1 1/2" pieces about 10-12" long. Pretty dry of course. 

I foresee us receiving donations of wood and giving sets of blanks to members to turn into the stands which would be displayed at meetings and then donated. 

A shout out is due for Pam Day, one of our newer members for this idea. Three cheers, Pam. Pam. Pam. 

When I have more time, I am going to dig through the piles of my lifetime supply of wood to see what I can come up with. I think I have some stuff that can be sawn into blanks and made into stands. Nothin' fancy, some ash and box elder but serviceable. A note in the directions Bob Patros sent along mentions finishes, sounds like polyurethane is the best for durability, being impervious to the chemicals used in the wigs or their cleaning and more importantly, avoiding toxicity. 

Please consider volunteering,whether it is donating blanks, turning the stands or other aspects of such a project. 

John 

------ Original Message ------ 
From: "Robert Patros" < rjpatros05 at gmail.com > 
To: crw-talk at crwoodturner.com 
Sent: 11/16/2021 11:00:16 PM 
Subject: [crw-talk] Fwd: Wig stand plans 



At our meeting Saturday, John mentioned an upcoming challenge. Wig stands. Please see the attachment below. I found these online. I have the top done and am working on the rest. Pretty straightforward. Nice project. 

Sent from my iPhone 

Begin forwarded message: 


<blockquote>

From: Robert Patros < rjpatros05 at gmail.com > 
Date: November 14, 2021 at 12:36:52 PM CST 
To: rjpatros05 at gmail.com 
Subject: Wig stand plans 




<blockquote>

https://wgo.ca/Documents/Projects/WigStand.pdf 

Shared via the Google app 


Sent from my iPhone 

</blockquote>

</blockquote>


_________________________________________ 
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. 
______ 
crw-talk mailing list 
crw-talk at crwoodturner.com 
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com 
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211117/c11f8314/attachment.html>

From wisawdust at charter.net  Thu Nov 18 15:24:17 2021
From: wisawdust at charter.net (wisawdust at charter.net)
Date: Thu, 18 Nov 2021 21:24:17 +0000
Subject: [crw-talk] Luther Demo
Message-ID: <307c3c5f744c5196ccc62b631a87c03700794233@webmail>

I would like some help on Monday, November 22 to load the lathes for
the demo. I am thinking about 3 or 4 in the afternoon. Should only
take about 15-20 minutes. I only need 2-3 people. Let me know if you
are coming and what time works best for you. Let's plan on meeting at
the community center (club meeting place). Thanks
Duane

	-----------------------------------------From: "James Bloomer" 
To: "CRW talk"
Cc: 
Sent: Wednesday November 17 2021 10:29:49AM
Subject: [crw-talk] Luther Demo

 Good morning, the Demo at Luther High is fast approaching. I am
reaching out for anyone to attend and demo. I also would like anyone
that can let us display their show pieces to highlight the various
forms this craft can be done.  
 To date I have the following demonstrators Myself Aaron G Duane 
 a few reminders; -It is bring your own lathe and turning stock... We
still have 2 club lathes we can bring so if you can come but need a
lathe, let us know -If you're going to let us display a show piece,
contact me so we can arrange pick up and drop off. -Feel free to bring
different tools/material to show the multitude of options  -if you
have american woodturner magazines bring those as well.  
 If you can come and demo reply to this email with your name, what
you're wanting to demo and if you're bringing a lathe or need us to
bring a club lathe.  
 The Demo is on the 23rd We will arrive at Luther at 1130 to offload
equipment 12-1 is set up and finalize  1-3 is the intro, demo and
questions 

 --
 James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211118/de281d12/attachment.html>

From rjpatros05 at gmail.com  Fri Nov 19 08:20:37 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Fri, 19 Nov 2021 08:20:37 -0600
Subject: [crw-talk] Wig stand
Message-ID: <0F469525-0401-4D97-8D95-3FEC4C92417F@gmail.com>

Happy with my first wig stand. Applied a coat of Boiled Linseed Oil. Cherry on top and bottom. Walnut in the middle. The directions called for the base to have ability to store jewelry. The top is smaller in circumference than what the plans called for but hopefully ok. 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_6391.jpg
Type: image/jpeg
Size: 958766 bytes
Desc: not available
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211119/403ed855/attachment.jpg>
-------------- next part --------------


Sent from my iPhone

From aaronagesicki at gmail.com  Fri Nov 19 10:16:24 2021
From: aaronagesicki at gmail.com (aaronagesicki at gmail.com)
Date: Fri, 19 Nov 2021 10:16:24 -0600
Subject: [crw-talk] Wig stand
In-Reply-To: <0F469525-0401-4D97-8D95-3FEC4C92417F@gmail.com>
References: <0F469525-0401-4D97-8D95-3FEC4C92417F@gmail.com>
Message-ID: <232301d7dd60$cce61a70$66b24f50$@gmail.com>

Nice. 


Aaron Gesicki



-----Original Message-----
From: crw-talk
<crw-talk-bounces at crwoodturner.com> On Behalf
Of Robert Patros
Sent: Friday, November 19, 2021 8:21 AM
To: crw-talk at crwoodturner.com
Subject: [crw-talk] Wig stand

Happy with my first wig stand. Applied a coat
of Boiled Linseed Oil. Cherry on top and
bottom. Walnut in the middle. The directions
called for the base to have ability to store
jewelry. The top is smaller in circumference
than what the plans called for but hopefully
ok. 




From rjpatros05 at gmail.com  Fri Nov 19 10:51:19 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Fri, 19 Nov 2021 10:51:19 -0600
Subject: [crw-talk] Wig stand
In-Reply-To: <232301d7dd60$cce61a70$66b24f50$@gmail.com>
References: <232301d7dd60$cce61a70$66b24f50$@gmail.com>
Message-ID: <04F11620-A4C1-42B3-A99E-AFAE2427D6C2@gmail.com>

Thank you. 

Sent from my iPhone

> On Nov 19, 2021, at 10:17 AM, aaronagesicki at gmail.com wrote:
> 
> ?Nice. 
> 
> 
> Aaron Gesicki
> 
> 
> 
> -----Original Message-----
> From: crw-talk
> <crw-talk-bounces at crwoodturner.com> On Behalf
> Of Robert Patros
> Sent: Friday, November 19, 2021 8:21 AM
> To: crw-talk at crwoodturner.com
> Subject: [crw-talk] Wig stand
> 
> Happy with my first wig stand. Applied a coat
> of Boiled Linseed Oil. Cherry on top and
> bottom. Walnut in the middle. The directions
> called for the base to have ability to store
> jewelry. The top is smaller in circumference
> than what the plans called for but hopefully
> ok. 
> 
> 
> 
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/


From raaschb at charter.net  Fri Nov 19 14:09:02 2021
From: raaschb at charter.net (Bob R)
Date: Fri, 19 Nov 2021 14:09:02 -0600
Subject: [crw-talk] Wig stand
Message-ID: <mailman.2.1637352558.601495.crw-talk_crwoodturner.com@crwoodturner.com>

Very nicely done, contrasting woods is nice touch.

Bob R, Sent from my Phone
On Nov 19, 2021 8:20 AM, Robert Patros <rjpatros05 at gmail.com> wrote:
>
> Happy with my first wig stand. Applied a coat of Boiled Linseed Oil. Cherry on top and bottom. Walnut in the middle. The directions called for the base to have ability to store jewelry. The top is smaller in circumference than what the plans called for but hopefully ok. 
>
>
>
> Sent from my iPhone
> _________________________________________ 
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. 
> ______ 
> crw-talk mailing list 
> crw-talk at crwoodturner.com 
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com 
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ 

From griff at mwt.net  Fri Nov 19 14:35:20 2021
From: griff at mwt.net (John & Donna Griffiths)
Date: Fri, 19 Nov 2021 20:35:20 +0000
Subject: [crw-talk] Craft Supplies
Message-ID: <em78d3861a-cfa2-45ba-963f-e2bae5728e41@johnanddonna-pc>

Hello Members, for those who did not make last Saturday's meeting, Duane 
Hill is once again putting together a Tool Buy, 10% or greater discount, 
and free shipping, we need a $1,000.00 minimum order.  Deadline is 
11/30, pay when the stuff arrives, contact Duane at 
wisawdust at charter.net
John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211119/3d8523a1/attachment.html>

From griff at mwt.net  Fri Nov 19 14:55:43 2021
From: griff at mwt.net (John & Donna Griffiths)
Date: Fri, 19 Nov 2021 20:55:43 +0000
Subject: [crw-talk] Wig stand
In-Reply-To: <04F11620-A4C1-42B3-A99E-AFAE2427D6C2@gmail.com>
References: <232301d7dd60$cce61a70$66b24f50$@gmail.com>
	<04F11620-A4C1-42B3-A99E-AFAE2427D6C2@gmail.com>
Message-ID: <em51eafca7-1e92-4327-8f54-438e3141dc57@johnanddonna-pc>

Hello,

Re: the wig stands,  I think I can get two 2"x6"x8' cherry planks just 
under 2" thick for free.  Wet wood, home sawed, not skip planed, sawed 
recently.  If people are interested in them, I will see if I can get 
them and cut them into kits for wig stands for members to make wig 
stands.  $2.00 donation to the club per kit (two 6" square top/bottom 
pieces and 1 1/2" x 1/ 1/2" x 14" stem.  You turn them and donate the 
finished stand.

For the gear heads in this crowd, the sawmill used to cut the lumber is 
home built, powered by a World War II military surplus Le Roi 1,000 
Cubic inch gasoline engine.  It is a monster.  The blade cuts pretty 
darn smooth.  I hope to see it run next summer, it is all buttoned up 
for the winter now.

John

------ Original Message ------
From: "Robert Patros" <rjpatros05 at gmail.com>
To: "Membership mailing list for the AAW Chapter Coulee Region 
Woodturners." <crw-talk at crwoodturner.com>
Sent: 11/19/2021 10:51:19 AM
Subject: Re: [crw-talk] Wig stand

>Thank you.
>
>Sent from my iPhone
>
>>  On Nov 19, 2021, at 10:17 AM, aaronagesicki at gmail.com wrote:
>>
>>  ?Nice.
>>
>>
>>  Aaron Gesicki
>>
>>
>>
>>  -----Original Message-----
>>  From: crw-talk
>>  <crw-talk-bounces at crwoodturner.com> On Behalf
>>  Of Robert Patros
>>  Sent: Friday, November 19, 2021 8:21 AM
>>  To: crw-talk at crwoodturner.com
>>  Subject: [crw-talk] Wig stand
>>
>>  Happy with my first wig stand. Applied a coat
>>  of Boiled Linseed Oil. Cherry on top and
>>  bottom. Walnut in the middle. The directions
>>  called for the base to have ability to store
>>  jewelry. The top is smaller in circumference
>>  than what the plans called for but hopefully
>>  ok.
>>
>>
>>
>>  _________________________________________
>>  Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>>  ______
>>  crw-talk mailing list
>>crw-talk at crwoodturner.com
>>http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>  Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
>_________________________________________
>Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>______
>crw-talk mailing list
>crw-talk at crwoodturner.com
>http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/




From wisawdust at charter.net  Sat Nov 20 11:49:15 2021
From: wisawdust at charter.net (wisawdust)
Date: Sat, 20 Nov 2021 11:49:15 -0600
Subject: [crw-talk] Help with demo lathes
Message-ID: <mailman.3.1637430565.601495.crw-talk_crwoodturner.com@crwoodturner.com>

It has come to my attention that it would be better to pick up the club lathes on Sunday after the Packers/Vikings game .? I am thinking about 3:30 on Sunday at the Onalaska Comunity Center.? I will need 2-3 people to help.? Let me know if you can help.? Thanks.??DuaneSent from my Galaxy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211120/7a16b4de/attachment.html>

From jdwilson at acegroup.cc  Sat Nov 20 16:47:40 2021
From: jdwilson at acegroup.cc (Jennifer & Dan Wilson)
Date: Sat, 20 Nov 2021 16:47:40 -0600
Subject: [crw-talk] FW: Wig Stand
In-Reply-To: 802627796b97277b4dcb5a720b20a1a1
References: 802627796b97277b4dcb5a720b20a1a1
Message-ID: f1a107049691846e9373aac8981de232



Sent from Mail for Windows

From: jdwilson
Sent: Saturday, November 20, 2021 4:46 PM
To: Dan
Subject: Wig Stand

This is my prototype stand made of salted elm.? I have started another for this fun project.



Sent from my Verizon, Samsung Galaxy smartphone


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211120/317044d8/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20211117_140003.jpg
Type: image/*
Size: 7333308 bytes
Desc: not available
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211120/317044d8/attachment.bin>

From llswigg at mwt.net  Sat Nov 20 19:47:09 2021
From: llswigg at mwt.net (Lavonne Swiggum)
Date: Sat, 20 Nov 2021 19:47:09 -0600
Subject: [crw-talk] Wig Stand
Message-ID: <4DAF3672-9B62-4E45-877D-6145554580E2@mwt.net>

Very nice!  I am going to try to make one too.

> On Nov 20, 2021, at 4:47 PM, Jennifer & Dan Wilson <jdwilson at acegroup.cc> wrote:
> 
>  
>  
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows
>  
> From: jdwilson <mailto:jdwilson at acegroup.cc>
> Sent: Saturday, November 20, 2021 4:46 PM
> To: Dan <mailto:jdwilson at acegroup.cc>
> Subject: Wig Stand
>  
> This is my prototype stand made of salted elm.  I have started another for this fun project.
>  
>  
>  
> Sent from my Verizon, Samsung Galaxy smartphone
>  
>  
> <20211117_140003.jpg>_________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com>
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com <http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com>
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211120/27ae033e/attachment.html>

From rjpatros05 at gmail.com  Sat Nov 20 20:56:29 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Sat, 20 Nov 2021 20:56:29 -0600
Subject: [crw-talk] FW: Wig Stand
In-Reply-To: <61997b4a.1c69fb81.609b8.0007SMTPIN_ADDED_BROKEN@mx.google.com>
References: <61997b4a.1c69fb81.609b8.0007SMTPIN_ADDED_BROKEN@mx.google.com>
Message-ID: <98D15334-6AE7-406B-ABB4-D4E819EF8A4E@gmail.com>

Very nice! 

Sent from my iPhone

> On Nov 20, 2021, at 4:48 PM, Jennifer & Dan Wilson <jdwilson at acegroup.cc> wrote:
> 
> ?
>  
>  
> Sent from Mail for Windows
>  
> From: jdwilson
> Sent: Saturday, November 20, 2021 4:46 PM
> To: Dan
> Subject: Wig Stand
>  
> This is my prototype stand made of salted elm.  I have started another for this fun project.
>  
>  
>  
> Sent from my Verizon, Samsung Galaxy smartphone
>  
>  
> <20211117_140003.jpg>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211120/d859d53d/attachment.html>

From jdcrow1956 at yahoo.com  Sun Nov 21 17:13:48 2021
From: jdcrow1956 at yahoo.com (John Fisher)
Date: Sun, 21 Nov 2021 23:13:48 +0000 (UTC)
Subject: [crw-talk] FW: Wig Stand
References: <1698863144.4094056.1637536428168.ref@mail.yahoo.com>
Message-ID: <1698863144.4094056.1637536428168@mail.yahoo.com>

 Nice job, and the wood looks good.
    On Saturday, November 20, 2021, 04:48:41 PM CST, Jennifer & Dan Wilson <jdwilson at acegroup.cc> wrote:  
 
 
?

 ?

Sent from Mail for Windows

 ?

From: jdwilson
Sent: Saturday, November 20, 2021 4:46 PM
To: Dan
Subject: Wig Stand

 ?

This is my prototype stand made of salted elm.? I have started another for this fun project.

 ?

 ?

 ?

Sent from my Verizon, Samsung Galaxy smartphone

 ?

 ?
_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211121/a2dd8c7d/attachment.html>

From marine9096 at gmail.com  Mon Nov 22 10:22:00 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Mon, 22 Nov 2021 10:22:00 -0600
Subject: [crw-talk] Luther Demo
Message-ID: <CAGK6+hDqB0iOBvbHVgFyDbNM+-8oS-CO=dMvov0gW1LmN8XrZQ@mail.gmail.com>

Good Morning, the Luther HS demo is tomorrow. Currently there are 3 of us
demoing.
Timeline;
1130 arrive at HS
12-1pm setup
1-3 Demo
Thanks to everyone that has helped.

Is anyone able to let us bring showpieces to highlight different techniques?
You could also meet us at the school or message to arrange a pickup and
drop off.


--
In service
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211122/e0ef2e74/attachment.html>

From aaronagesicki at gmail.com  Mon Nov 22 11:50:39 2021
From: aaronagesicki at gmail.com (aaronagesicki at gmail.com)
Date: Mon, 22 Nov 2021 11:50:39 -0600
Subject: [crw-talk] Luther Demo
In-Reply-To: <CAGK6+hDqB0iOBvbHVgFyDbNM+-8oS-CO=dMvov0gW1LmN8XrZQ@mail.gmail.com>
References: <CAGK6+hDqB0iOBvbHVgFyDbNM+-8oS-CO=dMvov0gW1LmN8XrZQ@mail.gmail.com>
Message-ID: <1a8101d7dfc9$76bdf4e0$6439dea0$@gmail.com>

I am bringing a little instant gallery. 
 
 
Aaron Gesicki
 
 
 
From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of James Bloomer
Sent: Monday, November 22, 2021 10:22 AM
To: CRW talk <crw-talk at crwoodturner.com>
Subject: [crw-talk] Luther Demo
 
Good Morning, the Luther HS demo is tomorrow. Currently there are 3 of us demoing. 
Timeline;
1130 arrive at HS
12-1pm setup
1-3 Demo
Thanks to everyone that has helped.
 
Is anyone able to let us bring showpieces to highlight different techniques?
You could also meet us at the school or message to arrange a pickup and drop off. 


 
--
In service  
James A. Bloomer
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211122/c69dae4a/attachment.html>

From aaronagesicki at gmail.com  Mon Nov 22 11:51:46 2021
From: aaronagesicki at gmail.com (aaronagesicki at gmail.com)
Date: Mon, 22 Nov 2021 11:51:46 -0600
Subject: [crw-talk] Luther Demo
In-Reply-To: <CAGK6+hDqB0iOBvbHVgFyDbNM+-8oS-CO=dMvov0gW1LmN8XrZQ@mail.gmail.com>
References: <CAGK6+hDqB0iOBvbHVgFyDbNM+-8oS-CO=dMvov0gW1LmN8XrZQ@mail.gmail.com>
Message-ID: <1a8601d7dfc9$9ed3a510$dc7aef30$@gmail.com>

I?ll need a workbench or a table for my lathe, and a display table for gallery. 
 
 
Aaron Gesicki
 
 
 
From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of James Bloomer
Sent: Monday, November 22, 2021 10:22 AM
To: CRW talk <crw-talk at crwoodturner.com>
Subject: [crw-talk] Luther Demo
 
Good Morning, the Luther HS demo is tomorrow. Currently there are 3 of us demoing. 
Timeline;
1130 arrive at HS
12-1pm setup
1-3 Demo
Thanks to everyone that has helped.
 
Is anyone able to let us bring showpieces to highlight different techniques?
You could also meet us at the school or message to arrange a pickup and drop off. 


 
--
In service  
James A. Bloomer
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211122/492cfa25/attachment.html>

From andrewpingree at gmail.com  Mon Nov 22 21:11:15 2021
From: andrewpingree at gmail.com (Andrew)
Date: Mon, 22 Nov 2021 21:11:15 -0600
Subject: [crw-talk] Luther Demo
In-Reply-To: <CAGK6+hDqB0iOBvbHVgFyDbNM+-8oS-CO=dMvov0gW1LmN8XrZQ@mail.gmail.com>
References: <CAGK6+hDqB0iOBvbHVgFyDbNM+-8oS-CO=dMvov0gW1LmN8XrZQ@mail.gmail.com>
Message-ID: <CANRBiF49Jim6WY1XkSBRoBmGquqsKNC=dA-8K0-ZoDWdrxJa3g@mail.gmail.com>

I have a couple pieces I could share.  If it's possible to meet at
10:30-11:00, that would be great.  I'm not sure where Luther is, but I'll
be at the UWL campus.

Andrew

On Mon, Nov 22, 2021, 10:25 AM James Bloomer <marine9096 at gmail.com> wrote:

> Good Morning, the Luther HS demo is tomorrow. Currently there are 3 of us
> demoing.
> Timeline;
> 1130 arrive at HS
> 12-1pm setup
> 1-3 Demo
> Thanks to everyone that has helped.
>
> Is anyone able to let us bring showpieces to highlight different
> techniques?
> You could also meet us at the school or message to arrange a pickup and
> drop off.
>
>
> --
> In service
> James A. Bloomer
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211122/caadfad2/attachment.html>

From marine9096 at gmail.com  Mon Nov 22 21:14:50 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Mon, 22 Nov 2021 21:14:50 -0600
Subject: [crw-talk] Luther Demo
In-Reply-To: <CANRBiF49Jim6WY1XkSBRoBmGquqsKNC=dA-8K0-ZoDWdrxJa3g@mail.gmail.com>
References: <CAGK6+hDqB0iOBvbHVgFyDbNM+-8oS-CO=dMvov0gW1LmN8XrZQ@mail.gmail.com>
	<CANRBiF49Jim6WY1XkSBRoBmGquqsKNC=dA-8K0-ZoDWdrxJa3g@mail.gmail.com>
Message-ID: <CAGK6+hD3y-eYQ_TMH-UA=cG5Vxwkt3c6U5V4r36gj8ULAuu3eQ@mail.gmail.com>

Andrew, I can meet up with you at 1100. Where would you like to meet?
Luther high is at 1501 Wilson st in Onalaska.

On Mon, Nov 22, 2021, 21:12 Andrew <andrewpingree at gmail.com> wrote:

> I have a couple pieces I could share.  If it's possible to meet at
> 10:30-11:00, that would be great.  I'm not sure where Luther is, but I'll
> be at the UWL campus.
>
> Andrew
>
> On Mon, Nov 22, 2021, 10:25 AM James Bloomer <marine9096 at gmail.com> wrote:
>
>> Good Morning, the Luther HS demo is tomorrow. Currently there are 3 of us
>> demoing.
>> Timeline;
>> 1130 arrive at HS
>> 12-1pm setup
>> 1-3 Demo
>> Thanks to everyone that has helped.
>>
>> Is anyone able to let us bring showpieces to highlight different
>> techniques?
>> You could also meet us at the school or message to arrange a pickup and
>> drop off.
>>
>>
>> --
>> In service
>> James A. Bloomer
>>
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
>> only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent:
>> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211122/4ec9c21e/attachment.html>

From marine9096 at gmail.com  Mon Nov 22 21:15:17 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Mon, 22 Nov 2021 21:15:17 -0600
Subject: [crw-talk] Luther Demo
In-Reply-To: <CANRBiF49Jim6WY1XkSBRoBmGquqsKNC=dA-8K0-ZoDWdrxJa3g@mail.gmail.com>
References: <CAGK6+hDqB0iOBvbHVgFyDbNM+-8oS-CO=dMvov0gW1LmN8XrZQ@mail.gmail.com>
	<CANRBiF49Jim6WY1XkSBRoBmGquqsKNC=dA-8K0-ZoDWdrxJa3g@mail.gmail.com>
Message-ID: <CAGK6+hAriHzqDD8ibDYt9g3KxbHx4YSAs9s-t1UF9FTZFE9O3Q@mail.gmail.com>

Andrew this is Jim Bloomer by the way

On Mon, Nov 22, 2021, 21:12 Andrew <andrewpingree at gmail.com> wrote:

> I have a couple pieces I could share.  If it's possible to meet at
> 10:30-11:00, that would be great.  I'm not sure where Luther is, but I'll
> be at the UWL campus.
>
> Andrew
>
> On Mon, Nov 22, 2021, 10:25 AM James Bloomer <marine9096 at gmail.com> wrote:
>
>> Good Morning, the Luther HS demo is tomorrow. Currently there are 3 of us
>> demoing.
>> Timeline;
>> 1130 arrive at HS
>> 12-1pm setup
>> 1-3 Demo
>> Thanks to everyone that has helped.
>>
>> Is anyone able to let us bring showpieces to highlight different
>> techniques?
>> You could also meet us at the school or message to arrange a pickup and
>> drop off.
>>
>>
>> --
>> In service
>> James A. Bloomer
>>
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
>> only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent:
>> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211122/df2bd39b/attachment.html>

From andrewpingree at gmail.com  Mon Nov 22 21:25:14 2021
From: andrewpingree at gmail.com (Andrew)
Date: Mon, 22 Nov 2021 21:25:14 -0600
Subject: [crw-talk] Luther Demo
In-Reply-To: <CAGK6+hAriHzqDD8ibDYt9g3KxbHx4YSAs9s-t1UF9FTZFE9O3Q@mail.gmail.com>
References: <CAGK6+hDqB0iOBvbHVgFyDbNM+-8oS-CO=dMvov0gW1LmN8XrZQ@mail.gmail.com>
	<CANRBiF49Jim6WY1XkSBRoBmGquqsKNC=dA-8K0-ZoDWdrxJa3g@mail.gmail.com>
	<CAGK6+hAriHzqDD8ibDYt9g3KxbHx4YSAs9s-t1UF9FTZFE9O3Q@mail.gmail.com>
Message-ID: <CANRBiF4ogw2MiNBOm82S3rxy4aXhA9u=Y7F-ToOVP=aZGMRq+Q@mail.gmail.com>

I can meet you there.  I have to be back at UWL by 11:30 or so. But that
should be doable. Where at Luther should I meet you? I drive a blue
Jeep Cherokee.

On Mon, Nov 22, 2021, 9:16 PM James Bloomer <marine9096 at gmail.com> wrote:

> Andrew this is Jim Bloomer by the way
>
> On Mon, Nov 22, 2021, 21:12 Andrew <andrewpingree at gmail.com> wrote:
>
>> I have a couple pieces I could share.  If it's possible to meet at
>> 10:30-11:00, that would be great.  I'm not sure where Luther is, but I'll
>> be at the UWL campus.
>>
>> Andrew
>>
>> On Mon, Nov 22, 2021, 10:25 AM James Bloomer <marine9096 at gmail.com>
>> wrote:
>>
>>> Good Morning, the Luther HS demo is tomorrow. Currently there are 3 of
>>> us demoing.
>>> Timeline;
>>> 1130 arrive at HS
>>> 12-1pm setup
>>> 1-3 Demo
>>> Thanks to everyone that has helped.
>>>
>>> Is anyone able to let us bring showpieces to highlight different
>>> techniques?
>>> You could also meet us at the school or message to arrange a pickup and
>>> drop off.
>>>
>>>
>>> --
>>> In service
>>> James A. Bloomer
>>>
>>> _________________________________________
>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply"
>>> goes only to sender.
>>> ______
>>> crw-talk mailing list
>>> crw-talk at crwoodturner.com
>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>> Check the archive to make sure your message was sent:
>>> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>>
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
>> only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent:
>> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211122/04cc3df2/attachment.html>

From andrewpingree at gmail.com  Tue Nov 23 09:25:03 2021
From: andrewpingree at gmail.com (Andrew)
Date: Tue, 23 Nov 2021 09:25:03 -0600
Subject: [crw-talk] Luther Demo
In-Reply-To: <CAGK6+hAriHzqDD8ibDYt9g3KxbHx4YSAs9s-t1UF9FTZFE9O3Q@mail.gmail.com>
References: <CAGK6+hDqB0iOBvbHVgFyDbNM+-8oS-CO=dMvov0gW1LmN8XrZQ@mail.gmail.com>
	<CANRBiF49Jim6WY1XkSBRoBmGquqsKNC=dA-8K0-ZoDWdrxJa3g@mail.gmail.com>
	<CAGK6+hAriHzqDD8ibDYt9g3KxbHx4YSAs9s-t1UF9FTZFE9O3Q@mail.gmail.com>
Message-ID: <CANRBiF48fU2B-mMKhjuVpYCLnRdKvU+Ebbum8REdBgQpMPdSUw@mail.gmail.com>

Jim,

Where at Luther are we meeting?

On Mon, Nov 22, 2021, 9:16 PM James Bloomer <marine9096 at gmail.com> wrote:

> Andrew this is Jim Bloomer by the way
>
> On Mon, Nov 22, 2021, 21:12 Andrew <andrewpingree at gmail.com> wrote:
>
>> I have a couple pieces I could share.  If it's possible to meet at
>> 10:30-11:00, that would be great.  I'm not sure where Luther is, but I'll
>> be at the UWL campus.
>>
>> Andrew
>>
>> On Mon, Nov 22, 2021, 10:25 AM James Bloomer <marine9096 at gmail.com>
>> wrote:
>>
>>> Good Morning, the Luther HS demo is tomorrow. Currently there are 3 of
>>> us demoing.
>>> Timeline;
>>> 1130 arrive at HS
>>> 12-1pm setup
>>> 1-3 Demo
>>> Thanks to everyone that has helped.
>>>
>>> Is anyone able to let us bring showpieces to highlight different
>>> techniques?
>>> You could also meet us at the school or message to arrange a pickup and
>>> drop off.
>>>
>>>
>>> --
>>> In service
>>> James A. Bloomer
>>>
>>> _________________________________________
>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply"
>>> goes only to sender.
>>> ______
>>> crw-talk mailing list
>>> crw-talk at crwoodturner.com
>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>> Check the archive to make sure your message was sent:
>>> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>>
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
>> only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent:
>> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211123/a362f94e/attachment.html>

From marine9096 at gmail.com  Thu Nov 25 13:02:25 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Thu, 25 Nov 2021 13:02:25 -0600
Subject: [crw-talk] Happy Thanksgiving
Message-ID: <CAGK6+hDE8BXfMf4U7=GHuH_+smDgkR0gJBYHnsKf0Z32kAxE+w@mail.gmail.com>

Where ever your travels take you be it home or at friends or family or
both. Have a happy Thanksgiving.

In service
Jim Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211125/e58fd4c5/attachment.html>

From rjpatros05 at gmail.com  Thu Nov 25 13:37:49 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Thu, 25 Nov 2021 13:37:49 -0600
Subject: [crw-talk] Happy Thanksgiving
In-Reply-To: <CAGK6+hDE8BXfMf4U7=GHuH_+smDgkR0gJBYHnsKf0Z32kAxE+w@mail.gmail.com>
References: <CAGK6+hDE8BXfMf4U7=GHuH_+smDgkR0gJBYHnsKf0Z32kAxE+w@mail.gmail.com>
Message-ID: <90ED42D7-4F31-4E19-B027-FB72D3CA5E70@gmail.com>

Thank you, Jim! The best to your family as well. Happy Thanksgiving ? 

Sent from my iPhone

> On Nov 25, 2021, at 1:03 PM, James Bloomer <marine9096 at gmail.com> wrote:
> 
> ?
> Where ever your travels take you be it home or at friends or family or both. Have a happy Thanksgiving. 
> 
> In service
> Jim Bloomer
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/


From jphillips006 at centurytel.net  Thu Nov 25 15:42:19 2021
From: jphillips006 at centurytel.net (John Phillips)
Date: Thu, 25 Nov 2021 15:42:19 -0600
Subject: [crw-talk] Happy Thanksgiving
In-Reply-To: <90ED42D7-4F31-4E19-B027-FB72D3CA5E70@gmail.com>
References: <90ED42D7-4F31-4E19-B027-FB72D3CA5E70@gmail.com>
Message-ID: <9B0E03CD-5BA7-4810-B34F-4CD2992DF4A7@centurytel.net>

Thanks Jim,

Sent from my iPhone

> On Nov 25, 2021, at 1:38 PM, Robert Patros <rjpatros05 at gmail.com> wrote:
> 
> ?Thank you, Jim! The best to your family as well. Happy Thanksgiving ? 
> 
> Sent from my iPhone
> 
>> On Nov 25, 2021, at 1:03 PM, James Bloomer <marine9096 at gmail.com> wrote:
>> 
>> ?
>> Where ever your travels take you be it home or at friends or family or both. Have a happy Thanksgiving. 
>> 
>> In service
>> Jim Bloomer
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
> 
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/



From raaschb at charter.net  Sat Nov 27 09:48:11 2021
From: raaschb at charter.net (Bob R)
Date: Sat, 27 Nov 2021 09:48:11 -0600
Subject: [crw-talk] Fwd: Holiday Vendor Showcase - Nov 26, 27, and 28,
 2021 - 7-9pm CST
Message-ID: <mailman.4.1638028286.601495.crw-talk_crwoodturner.com@crwoodturner.com>

An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211127/4a8b1cc5/attachment.html>

From aaronagesicki at gmail.com  Sat Nov 27 10:39:15 2021
From: aaronagesicki at gmail.com (aaronagesicki at gmail.com)
Date: Sat, 27 Nov 2021 10:39:15 -0600
Subject: [crw-talk] Fwd: Holiday Vendor Showcase - Nov 26, 27, and 28,
 2021 - 7-9pm CST
In-Reply-To: <61a25411.1c69fb81.b95f8.611eSMTPIN_ADDED_MISSING@mx.google.com>
References: <61a25411.1c69fb81.b95f8.611eSMTPIN_ADDED_MISSING@mx.google.com>
Message-ID: <017901d7e3ad$51b961b0$f52c2510$@gmail.com>

I was there last night. Well worth the time. 
Any time spent with John Jordan is well spent.
Some parting wisdom from John, for all us rednecks ? ?It?s pronounced Law-ren Nee-Kloe?
 
 
Aaron Gesicki
 
 
 
From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Bob R
Sent: Saturday, November 27, 2021 9:48 AM
To: CRW talk <crw-talk at crwoodturner.com>
Subject: [crw-talk] Fwd: Holiday Vendor Showcase - Nov 26, 27, and 28, 2021 - 7-9pm CST
 
 
Bob R, Sent from my Phone
---------- Forwarded message ----------
From: Cindy Drozda <cindy at cindydrozda.com <mailto:cindy at cindydrozda.com> >
Date: Nov 25, 2021 4:00 AM
Subject: Holiday Vendor Showcase - Nov 26, 27, and 28, 2021 - 7-9pm CST
To: Bob Raasch <raaschb at charter.net <mailto:raaschb at charter.net> >
Cc: 



I hope to see you!
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
No images?  <https://cindydrozdawoodturning.cmail20.com/t/t-e-chjjyhd-ydtddylyyh-d/> Click here
  <http://i1.cmail20.com/ei/t/5A/597/CC9/053145/csfinal/OnlineLogoPurple.jpg> 

Hi Bob,

Join me, along with Tod, Lyle, John, Steve, and Joe on Thanksgiving weekend for our Holiday Vendor Showcase!
3 evenings of fun! Free and Interactive Zoom meetings.
Black Friday weekend specials, Tool Showcase, 
Collaborative mini-Demos, Raffle prizes, Chat & Share!
Open to everyone. Please spread the word.
We're looking forward to seeing you!
 <https://cindydrozdawoodturning.cmail20.com/t/t-l-chjjyhd-ydtddylyyh-r/> Register here, it's FREE 
 <https://cindydrozdawoodturning.cmail20.com/t/t-l-chjjyhd-ydtddylyyh-y/> 
November 26, 27, and 28, 2021
From 7 - 9pm Central Standard Time
Register in advance:
 <https://cindydrozdawoodturning.cmail20.com/t/t-l-chjjyhd-ydtddylyyh-j/> https://us02web.zoom.us/meeting/register/tZEvduuurTgoHtH9C61nkAf2dy14df57Rmr
After registering, you will receive a confirmation email containing information about joining the meetings.
Tell all of your friends, club members, woodturners! Share the registration link on social media and let everyone know.
Register once, and use the same meeting link for all 3 evenings.
 <https://cindydrozdawoodturning.cmail20.com/t/t-l-chjjyhd-ydtddylyyh-i/> Visit my website for tools and upcoming events 
  <http://i1.cmail20.com/ei/t/5A/597/CC9/053145/csfinal/CDliveOnline.png> 

Cindy Drozda
PO Box 19065
Boulder CO 80308
303 449 7170
You are receiving this because you subscribed to my newsletter
 <https://cindydrozdawoodturning.cmail20.com/t/t-u-chjjyhd-ydtddylyyh-k/> Unsubscribe 
  <https://cindydrozdawoodturning.cmail20.com/t/t-o-chjjyhd-ydtddylyyh/o.gif> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211127/b8fde9f1/attachment.html>

From marine9096 at gmail.com  Mon Nov 29 12:49:41 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Mon, 29 Nov 2021 12:49:41 -0600
Subject: [crw-talk] Luther Demo For Dec
Message-ID: <CAGK6+hCCwUj9VUbL0iYE6H01kbsEyn0CKJJ8UC+mNhVq-GuDgQ@mail.gmail.com>

Good Afternoon, the initial demo for Luther went extremely well. The Kids
were extremely interested in what we had to offer. They are looking forward
to the hands on pen turning demo on the 15th.

With that being said I am hoping to have at least 6 of us there for the
hands-on portion of the demo. They anticipate up to 30 kids making pens
(slimline wood pens) so the more stations we can bring, the more time spent
mentoring and teaching versus trying to rush them through.  We will bring
all 3 club lathes, they have one jet mini, and any other lathes we can
bring. We will also need scrapers, and any carbide tools we can muster for
the majority of the kids. Jay has been nice enough to drill glue and round
the blanks for the kids.
Finish wise was planning on using the finish Jay has for his pens unless
there are any other suggestions( looking for a simple application product).
The school is providing sandpaper for finishing and will reimburse the club
for parts.

I am asking to please respond to this email if you are planning to assist
with the hands on. Please indicate if you are bringing a lathe or need the
club lathe.


In Service
-- 
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211129/3be18562/attachment.html>

From aaronagesicki at gmail.com  Mon Nov 29 12:54:55 2021
From: aaronagesicki at gmail.com (aaronagesicki at gmail.com)
Date: Mon, 29 Nov 2021 12:54:55 -0600
Subject: [crw-talk] Luther Demo For Dec
In-Reply-To: <CAGK6+hCCwUj9VUbL0iYE6H01kbsEyn0CKJJ8UC+mNhVq-GuDgQ@mail.gmail.com>
References: <CAGK6+hCCwUj9VUbL0iYE6H01kbsEyn0CKJJ8UC+mNhVq-GuDgQ@mail.gmail.com>
Message-ID: <023d01d7e552$99e48bd0$cdada370$@gmail.com>

I?ll be there. Bringing my lathe. 
 
 
Aaron Gesicki
 
 
 
From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of James Bloomer
Sent: Monday, November 29, 2021 12:50 PM
To: CRW talk <crw-talk at crwoodturner.com>
Subject: [crw-talk] Luther Demo For Dec
 


Good Afternoon, the initial demo for Luther went extremely well. The Kids were extremely interested in what we had to offer. They are looking forward to the hands on pen turning demo on the 15th.
 
With that being said I am hoping to have at least 6 of us there for the hands-on portion of the demo. They anticipate up to 30 kids making pens (slimline wood pens) so the more stations we can bring, the more time spent mentoring and teaching versus trying to rush them through.  We will bring all 3 club lathes, they have one jet mini, and any other lathes we can bring. We will also need scrapers, and any carbide tools we can muster for the majority of the kids. Jay has been nice enough to drill glue and round the blanks for the kids. 
Finish wise was planning on using the finish Jay has for his pens unless there are any other suggestions( looking for a simple application product). 
The school is providing sandpaper for finishing and will reimburse the club for parts. 
 
I am asking to please respond to this email if you are planning to assist with the hands on. Please indicate if you are bringing a lathe or need the club lathe.
 
 
In Service
-- 
James A. Bloomer
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211129/8453da97/attachment.html>

From wisawdust at charter.net  Mon Nov 29 15:25:15 2021
From: wisawdust at charter.net (wisawdust at charter.net)
Date: Mon, 29 Nov 2021 21:25:15 +0000
Subject: [crw-talk] Luther Demo For Dec
Message-ID: <ea452f7318acb4e7b7c226ce87fa0c6325685ff7@webmail>

Jim, I plan on attending. I will bring my little Delta lathe. I also
have about 6 pen mandrels I can bring. Let me know if you need
anything else.
Duane

	-----------------------------------------From: "James Bloomer" 
To: "CRW talk"
Cc: 
Sent: Monday November 29 2021 1:13:18PM
Subject: [crw-talk] Luther Demo For Dec

Good Afternoon, the initial demo for Luther went extremely well. The
Kids were extremely interested in what we had to offer. They are
looking forward to the hands on pen turning demo on the 15th. 
 With that being said I am hoping to have at least 6 of us there for
the hands-on portion of the demo. They anticipate up to 30 kids making
pens (slimline wood pens) so the more stations we can bring, the more
time spent mentoring and teaching versus trying to rush them through.
We will bring all 3 club lathes, they have one jet mini, and any other
lathes we can bring. We will also need scrapers, and any carbide tools
we can muster for the majority of the kids. Jay has been nice enough
to drill glue and round the blanks for the kids.  Finish wise was
planning on using the finish Jay has for his pens unless there are any
other suggestions( looking for a simple application product).  The
school is providing sandpaper for finishing and will reimburse the
club for parts.  
 I am asking to please respond to this email if you are planning to
assist with the hands on. Please indicate if you are bringing a lathe
or need the club lathe. 

 In Service --
 James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211129/b1b6e499/attachment.html>