From Dfalch at hbci.com  Fri May  7 07:39:25 2021
From: Dfalch at hbci.com (Doug Falch)
Date: Fri, 7 May 2021 07:39:25 -0500
Subject: [crw-talk] Fwd: McMullen,
 Brother Finbar - Winona Post > Obituaries > Current Issue
References: <5B035D7D-8D59-47FD-BA0D-9B0075DE867F@hbci.com>
Message-ID: <B7CF818B-F870-4E30-A99C-6729DFD95A4C@hbci.com>

Long time member.

Sent from my iPad

Begin forwarded message:

> From: Doug Falch <Dfalch at hbci.com>
> Date: May 7, 2021 at 6:56:56 AM CDT
> To: Art Ustby <ustby at charter.net>, Denis & Doug Falch <dfalch at hbci.com>
> Subject: McMullen, Brother Finbar - Winona Post > Obituaries > Current Issue
> 
> ?
> https://www.winonapost.com/Obituaries/Current-Issue/ArticleID/72364/McMullen-Brother-Finbar
> 
> 
> Sent from my iPad
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210507/70708713/attachment.html>

From wisawdust at charter.net  Fri May  7 07:57:04 2021
From: wisawdust at charter.net (wisawdust at charter.net)
Date: Fri, 07 May 2021 12:57:04 +0000
Subject: [crw-talk] Fwd: McMullen,
 Brother Finbar - Winona Post > Obituaries > Current Issue
Message-ID: <61ed9e3369710182ed3dd3dbed0fc5f744a7d4b0@webmail>

So sorry to hear of his passing. He was a very knowledgeable member
and will be sorely missed. Thanks for posting this Dennis/Doug.
Duane

	-----------------------------------------From: "Doug Falch" 
To: "Virginia Green"
Cc: 
Sent: Friday May 7 2021 7:40:34AM
Subject: [crw-talk] Fwd: McMullen, Brother Finbar - Winona Post >
Obituaries > Current Issue

 Long time member.

Sent from my iPad 
 Begin forwarded message:

  FROM: Doug Falch 
DATE: May 7, 2021 at 6:56:56 AM CDT
TO: Art Ustby , Denis & Doug Falch 
SUBJECT: MCMULLEN, BROTHER FINBAR - WINONA POST > OBITUARIES > CURRENT
ISSUE

   ?
https://www.winonapost.com/Obituaries/Current-Issue/ArticleID/72364/McMullen-Brother-Finbar
[1]

Sent from my iPad  

Links:
------
[1]
https://www.winonapost.com/Obituaries/Current-Issue/ArticleID/72364/McMullen-Brother-Finbar

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210507/71179994/attachment.html>

From griff at mwt.net  Fri May  7 08:31:38 2021
From: griff at mwt.net (John & Donna Griffiths)
Date: Fri, 07 May 2021 13:31:38 +0000
Subject: [crw-talk] Fwd: McMullen,
 Brother Finbar - Winona Post > Obituaries > Current Issue
In-Reply-To: <61ed9e3369710182ed3dd3dbed0fc5f744a7d4b0@webmail>
References: <61ed9e3369710182ed3dd3dbed0fc5f744a7d4b0@webmail>
Message-ID: <emced91d55-a6de-4505-826a-a10e8bfe8da2@johnanddonna-pc>

I too saw that and was going to notify the club.  He was a remarkable 
person and the club benefited from his membership.  R.I.P. Finbar.

------ Original Message ------
From: wisawdust at charter.net
To: "'Membership mailing list for the AAW Chapter Coulee Region 
Woodturners.'" <crw-talk at crwoodturner.com>
Sent: 5/7/2021 7:57:04 AM
Subject: Re: [crw-talk] Fwd: McMullen, Brother Finbar - Winona Post > 
Obituaries > Current Issue

>So sorry to hear of his passing.  He was a very knowledgeable member 
>and will be sorely missed.  Thanks for posting this Dennis/Doug.
>
>Duane
>
>-----------------------------------------
>
>From: "Doug Falch" <dfalch at hbci.com>
>To: "Virginia Green"
>Cc:
>Sent: Friday May 7 2021 7:40:34AM
>Subject: [crw-talk] Fwd: McMullen, Brother Finbar - Winona Post > 
>Obituaries > Current Issue
>
>Long time member.
>
>Sent from my iPad
>
>Begin forwarded message:
>
>>From: Doug Falch <Dfalch at hbci.com>
>>Date: May 7, 2021 at 6:56:56 AM CDT
>>To: Art Ustby <ustby at charter.net>, Denis & Doug Falch 
>><dfalch at hbci.com>
>>Subject:McMullen, Brother Finbar - Winona Post > Obituaries > Current 
>>Issue
>>
>>?
>>https://www.winonapost.com/Obituaries/Current-Issue/ArticleID/72364/McMullen-Brother-Finbar
>>
>>
>>Sent from my iPad
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210507/87769f23/attachment.html>

From raaschb at charter.net  Fri May  7 09:25:51 2021
From: raaschb at charter.net (Bob Raasch)
Date: Fri, 7 May 2021 09:25:51 -0500
Subject: [crw-talk] Fwd: McMullen,
 Brother Finbar - Winona Post > Obituaries > Current Issue
In-Reply-To: <61ed9e3369710182ed3dd3dbed0fc5f744a7d4b0@webmail>
References: <61ed9e3369710182ed3dd3dbed0fc5f744a7d4b0@webmail>
Message-ID: <005701d7434c$e23700f0$a6a502d0$@charter.net>

I  echo that. What an interesting, and giving guy and wonderful conversationalist. And besides working wood and being an inventor, I remember when I purchased my scooter/moped thing, gee way back in 2007ish, he gave me lots of driving tips. I assume he used to have a cycle?? 

Bob  R

From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of wisawdust at charter.net
Sent: Friday, May 7, 2021 7:57 AM
To: 'Membership mailing list for the AAW Chapter Coulee Region Woodturners.' <crw-talk at crwoodturner.com>
Subject: Re: [crw-talk] Fwd: McMullen, Brother Finbar - Winona Post > Obituaries > Current Issue

 

So sorry to hear of his passing.  He was a very knowledgeable member and will be sorely missed.  Thanks for posting this Dennis/Doug.

 

Duane

-----------------------------------------

From: "Doug Falch" 
To: "Virginia Green"
Cc: 
Sent: Friday May 7 2021 7:40:34AM
Subject: [crw-talk] Fwd: McMullen, Brother Finbar - Winona Post > Obituaries > Current Issue

Long time member.

Sent from my iPad


Begin forwarded message:

From: Doug Falch <Dfalch at hbci.com <mailto:Dfalch at hbci.com> >
Date: May 7, 2021 at 6:56:56 AM CDT
To: Art Ustby <ustby at charter.net <mailto:ustby at charter.net> >, Denis & Doug Falch <dfalch at hbci.com <mailto:dfalch at hbci.com> >
Subject: McMullen, Brother Finbar - Winona Post > Obituaries > Current Issue

?
https://www.winonapost.com/Obituaries/Current-Issue/ArticleID/72364/McMullen-Brother-Finbar


Sent from my iPad

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210507/68a09618/attachment.html>

From rjpatros05 at gmail.com  Fri May  7 17:29:46 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Fri, 7 May 2021 17:29:46 -0500
Subject: [crw-talk] Remembering Brother Finbar
Message-ID: <053DAEF8-A0E6-413B-9007-CC9CFA5B4312@gmail.com>

Here?s an example of a ?Finovation? I purchased from Brother Finbar. Some in our club probably have one of his dust pans. Hand made! He would frequently discuss things he was working on. 

Great memory of Brother, Greg Haugen and I (and one or two others) traveling together to spend a day with Alan Lacer soon after I joined the club. We had a blast!

I sure missed seeing him at our club meetings. He was a wonderful man. 

-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_5616.jpg
Type: image/jpeg
Size: 2999101 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210507/9a57dd8c/attachment.jpg>
-------------- next part --------------


Sent from my iPhone

From aaronagesicki at gmail.com  Fri May  7 18:58:29 2021
From: aaronagesicki at gmail.com (aaronagesicki at gmail.com)
Date: Fri, 7 May 2021 18:58:29 -0500
Subject: [crw-talk] Remembering Brother Finbar
In-Reply-To: <053DAEF8-A0E6-413B-9007-CC9CFA5B4312@gmail.com>
References: <053DAEF8-A0E6-413B-9007-CC9CFA5B4312@gmail.com>
Message-ID: <782d01d7439c$e1512670$a3f37350$@gmail.com>

I also have one of those. 
My first road trip with Brother Finbar was a day in Minneapolis, to see Soren Berger. Jim Hamilton was also with us. And, unfortunately, now they are both gone. 
That's when I learned he was much more "worldly wise" than most of the clerics I knew. 


Aaron Gesicki



-----Original Message-----
From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Robert Patros
Sent: Friday, May 7, 2021 5:30 PM
To: crw-talk at crwoodturner.com
Subject: [crw-talk] Remembering Brother Finbar

Here?s an example of a ?Finovation? I purchased from Brother Finbar. Some in our club probably have one of his dust pans. Hand made! He would frequently discuss things he was working on. 

Great memory of Brother, Greg Haugen and I (and one or two others) traveling together to spend a day with Alan Lacer soon after I joined the club. We had a blast!

I sure missed seeing him at our club meetings. He was a wonderful man. 




From marine9096 at gmail.com  Thu May 13 09:14:37 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Thu, 13 May 2021 09:14:37 -0500
Subject: [crw-talk] Mike Peace Demo
Message-ID: <CAGK6+hA2GBs+16CoGzUP6+uCrEo+s9bKAJEmcOgOoRzSznjCUg@mail.gmail.com>

Good morning Members just a reminder this Sat is the Mike Peace Demo. I am
reposting the Link
See you on Sat

Description:Mike Peace is inviting you to a scheduled Zoom meeting. Join
Zoom Meeting
https://us02web.zoom.us/j/83254780353?pwd=SHJyZG13OU9QU203UVFGait2VzJnQT09
<https://www.google.com/url?q=https://us02web.zoom.us/j/83254780353?pwd%3DSHJyZG13OU9QU203UVFGait2VzJnQT09&sa=D&source=calendar&usd=2&usg=AOvVaw3yBaLa9hjalBT9POt3VJVc>
Meeting ID: 832 5478 0353 Passcode: 430912


-- 
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210513/0b543339/attachment.html>

From marine9096 at gmail.com  Fri May 14 21:11:01 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Fri, 14 May 2021 21:11:01 -0500
Subject: [crw-talk] Fwd: Mike Peace Demo
In-Reply-To: <CAGK6+hA2GBs+16CoGzUP6+uCrEo+s9bKAJEmcOgOoRzSznjCUg@mail.gmail.com>
References: <CAGK6+hA2GBs+16CoGzUP6+uCrEo+s9bKAJEmcOgOoRzSznjCUg@mail.gmail.com>
Message-ID: <CAGK6+hDmc994G1sCQPem_ZYom_+NJzBiEGmVEdUNzDoPr5mgcA@mail.gmail.com>

Good evening, figured would resend the link once more. Hope everyone has a
chance to attend.
Unfortunately, Uncle Sam will have my time tomorrow morning so I will miss
out.

---------- Forwarded message ---------
From: James Bloomer <marine9096 at gmail.com>
Date: Thu, May 13, 2021, 09:14
Subject: Mike Peace Demo
To: CRW talk <crw-talk at crwoodturner.com>


Good morning Members just a reminder this Sat is the Mike Peace Demo. I am
reposting the Link
See you on Sat

Description:Mike Peace is inviting you to a scheduled Zoom meeting. Join
Zoom Meeting
https://us02web.zoom.us/j/83254780353?pwd=SHJyZG13OU9QU203UVFGait2VzJnQT09
<https://www.google.com/url?q=https://us02web.zoom.us/j/83254780353?pwd%3DSHJyZG13OU9QU203UVFGait2VzJnQT09&sa=D&source=calendar&usd=2&usg=AOvVaw3yBaLa9hjalBT9POt3VJVc>
Meeting ID: 832 5478 0353 Passcode: 430912


-- 
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210514/dd50b64d/attachment.html>

From gardens53581 at gmail.com  Sat May 15 08:23:26 2021
From: gardens53581 at gmail.com (Ken Nancy)
Date: Sat, 15 May 2021 08:23:26 -0500
Subject: [crw-talk] mike peace... what time? ken g
Message-ID: <CALyPebcVSJBoSEvwm0+8486wwg03wgofsxyJ4hCcbQBfo-xJNg@mail.gmail.com>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210515/c1e0538c/attachment.html>

From marine9096 at gmail.com  Sat May 15 08:30:49 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Sat, 15 May 2021 08:30:49 -0500
Subject: [crw-talk] mike peace... what time? ken g
In-Reply-To: <CALyPebcVSJBoSEvwm0+8486wwg03wgofsxyJ4hCcbQBfo-xJNg@mail.gmail.com>
References: <CALyPebcVSJBoSEvwm0+8486wwg03wgofsxyJ4hCcbQBfo-xJNg@mail.gmail.com>
Message-ID: <CAGK6+hDuRNbLy4n28XyoM+d3H-_A_eRLbpiLJD+OsQXYNSVQyg@mail.gmail.com>

0900

On Sat, May 15, 2021, 08:25 Ken Nancy <gardens53581 at gmail.com> wrote:

>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210515/87111198/attachment.html>

From vgwintersteen at gmail.com  Sat May 15 11:39:12 2021
From: vgwintersteen at gmail.com (Virginia Wintersteen)
Date: Sat, 15 May 2021 11:39:12 -0500
Subject: [crw-talk] mike peace... what time? ken g
In-Reply-To: <CAGK6+hDuRNbLy4n28XyoM+d3H-_A_eRLbpiLJD+OsQXYNSVQyg@mail.gmail.com>
References: <CAGK6+hDuRNbLy4n28XyoM+d3H-_A_eRLbpiLJD+OsQXYNSVQyg@mail.gmail.com>
Message-ID: <ACF8ADCC-07A9-4EF5-A82C-3A9412F8212E@gmail.com>

I have a request from a friend who has a family heirloom child?s rocking chair that is missing one or two back spindles. Could someone make some new matching spindles?

Thanks 
Ginny
608-317-6719

Sent from my iPhone

> On May 15, 2021, at 8:33 AM, James Bloomer <marine9096 at gmail.com> wrote:
> 
> ?
> 0900
> 
>> On Sat, May 15, 2021, 08:25 Ken Nancy <gardens53581 at gmail.com> wrote:
>> 
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210515/7e019445/attachment.html>

From aaronagesicki at gmail.com  Sat May 15 12:47:19 2021
From: aaronagesicki at gmail.com (aaronagesicki at gmail.com)
Date: Sat, 15 May 2021 12:47:19 -0500
Subject: [crw-talk] mike peace... what time? ken g
In-Reply-To: <ACF8ADCC-07A9-4EF5-A82C-3A9412F8212E@gmail.com>
References: <CAGK6+hDuRNbLy4n28XyoM+d3H-_A_eRLbpiLJD+OsQXYNSVQyg@mail.gmail.com>
	<ACF8ADCC-07A9-4EF5-A82C-3A9412F8212E@gmail.com>
Message-ID: <195101d749b2$5a83ea80$0f8bbf80$@gmail.com>

Tentatively yes. Need to know more.
Length = ?
Wood species = ?
Finish required ?
 
 
Aaron Gesicki
 
 
 
From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Virginia Wintersteen
Sent: Saturday, May 15, 2021 11:39 AM
To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. <crw-talk at crwoodturner.com>
Subject: Re: [crw-talk] mike peace... what time? ken g
 
I have a request from a friend who has a family heirloom child?s rocking chair that is missing one or two back spindles. Could someone make some new matching spindles?
 
Thanks 
Ginny
608-317-6719
Sent from my iPhone



On May 15, 2021, at 8:33 AM, James Bloomer <marine9096 at gmail.com <mailto:marine9096 at gmail.com> > wrote:
?
0900
 
On Sat, May 15, 2021, 08:25 Ken Nancy <gardens53581 at gmail.com <mailto:gardens53581 at gmail.com> > wrote:
 
_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> 
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> 
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210515/6a2a8bbf/attachment.html>

From wisawdust at charter.net  Sat May 15 13:25:05 2021
From: wisawdust at charter.net (wisawdust)
Date: Sat, 15 May 2021 13:25:05 -0500
Subject: [crw-talk] mike peace... what time? ken g
In-Reply-To: <ACF8ADCC-07A9-4EF5-A82C-3A9412F8212E@gmail.com>
Message-ID: <mailman.0.1621103133.932717.crw-talk_crwoodturner.com@crwoodturner.com>

As Aaron said, size, species.? Also if they have a pic or vfc the broken part would be helpful.Sent from my Galaxy
-------- Original message --------From: Virginia Wintersteen <vgwintersteen at gmail.com> Date: 5/15/21  11:40 AM  (GMT-06:00) To: "Membership mailing list for the AAW Chapter Coulee Region Woodturners." <crw-talk at crwoodturner.com> Subject: Re: [crw-talk] mike peace... what time? ken g I have a request from a friend who has a family heirloom child?s rocking chair that is missing one or two back spindles. Could someone make some new matching spindles?Thanks?Ginny608-317-6719Sent from my iPhoneOn May 15, 2021, at 8:33 AM, James Bloomer <marine9096 at gmail.com> wrote:?0900On Sat, May 15, 2021, 08:25 Ken Nancy <gardens53581 at gmail.com> wrote:
_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/

_________________________________________Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.______crw-talk mailing listcrw-talk at crwoodturner.comhttp://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.comCheck the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210515/f3058821/attachment.html>

From vgwintersteen at gmail.com  Sat May 15 16:10:07 2021
From: vgwintersteen at gmail.com (Virginia Wintersteen)
Date: Sat, 15 May 2021 16:10:07 -0500
Subject: [crw-talk] mike peace... what time? ken g
In-Reply-To: <60a01281.1c69fb81.82c9a.5f5cSMTPIN_ADDED_MISSING@mx.google.com>
References: <60a01281.1c69fb81.82c9a.5f5cSMTPIN_ADDED_MISSING@mx.google.com>
Message-ID: <C867F7D9-8DE4-4777-A43E-36EF572C91CD@gmail.com>

Here is a picture of the chair and spindles

Sent from my iPhone

> On May 15, 2021, at 1:27 PM, wisawdust <wisawdust at charter.net> wrote:
> 
> ?
> As Aaron said, size, species.  Also if they have a pic or vfc the broken part would be helpful.
> 
> 
> 
> Sent from my Galaxy
> 
> 
> -------- Original message --------
> From: Virginia Wintersteen <vgwintersteen at gmail.com>
> Date: 5/15/21 11:40 AM (GMT-06:00)
> To: "Membership mailing list for the AAW Chapter Coulee Region Woodturners." <crw-talk at crwoodturner.com>
> Subject: Re: [crw-talk] mike peace... what time? ken g
> 
> I have a request from a friend who has a family heirloom child?s rocking chair that is missing one or two back spindles. Could someone make some new matching spindles?
> 
> Thanks 
> Ginny
> 608-317-6719
> 
> Sent from my iPhone
> 
>>> On May 15, 2021, at 8:33 AM, James Bloomer <marine9096 at gmail.com> wrote:
>>> 
>> ?
>> 0900
>> 
>>> On Sat, May 15, 2021, 08:25 Ken Nancy <gardens53581 at gmail.com> wrote:
>>> 
>>> _________________________________________
>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>>> ______
>>> crw-talk mailing list
>>> crw-talk at crwoodturner.com
>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210515/d73c62bd/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image0.jpeg
Type: image/jpeg
Size: 147680 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210515/d73c62bd/attachment.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.jpeg
Type: image/jpeg
Size: 174433 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210515/d73c62bd/attachment-0001.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image2.jpeg
Type: image/jpeg
Size: 185264 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210515/d73c62bd/attachment-0002.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image3.jpeg
Type: image/jpeg
Size: 186536 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210515/d73c62bd/attachment-0003.jpeg>

From aaronagesicki at gmail.com  Sat May 15 17:40:41 2021
From: aaronagesicki at gmail.com (aaronagesicki at gmail.com)
Date: Sat, 15 May 2021 17:40:41 -0500
Subject: [crw-talk] mike peace... what time? ken g
In-Reply-To: <C867F7D9-8DE4-4777-A43E-36EF572C91CD@gmail.com>
References: <60a01281.1c69fb81.82c9a.5f5cSMTPIN_ADDED_MISSING@mx.google.com>
	<C867F7D9-8DE4-4777-A43E-36EF572C91CD@gmail.com>
Message-ID: <1f2601d749db$5614ace0$023e06a0$@gmail.com>

How long?
 
 
Aaron Gesicki
 
 
 
From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Virginia Wintersteen
Sent: Saturday, May 15, 2021 4:10 PM
To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. <crw-talk at crwoodturner.com>
Subject: Re: [crw-talk] mike peace... what time? ken g
 
Here is a picture of the chair and spindles
Sent from my iPhone



On May 15, 2021, at 1:27 PM, wisawdust <wisawdust at charter.net <mailto:wisawdust at charter.net> > wrote:
?
As Aaron said, size, species.  Also if they have a pic or vfc the broken part would be helpful.
 
 
 
Sent from my Galaxy
 
 
-------- Original message --------
From: Virginia Wintersteen <vgwintersteen at gmail.com <mailto:vgwintersteen at gmail.com> > 
Date: 5/15/21 11:40 AM (GMT-06:00) 
To: "Membership mailing list for the AAW Chapter Coulee Region Woodturners." <crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> > 
Subject: Re: [crw-talk] mike peace... what time? ken g 
 
I have a request from a friend who has a family heirloom child?s rocking chair that is missing one or two back spindles. Could someone make some new matching spindles?
 
Thanks 
Ginny
608-317-6719
Sent from my iPhone



On May 15, 2021, at 8:33 AM, James Bloomer <marine9096 at gmail.com <mailto:marine9096 at gmail.com> > wrote:
?
0900
 
On Sat, May 15, 2021, 08:25 Ken Nancy <gardens53581 at gmail.com <mailto:gardens53581 at gmail.com> > wrote:
 
_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> 
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> 
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> 
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210515/71a5d874/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 205689 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210515/71a5d874/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 172604 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210515/71a5d874/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 182934 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210515/71a5d874/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.jpg
Type: image/jpeg
Size: 184450 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210515/71a5d874/attachment-0003.jpg>

From griff at mwt.net  Sun May 16 09:09:02 2021
From: griff at mwt.net (John & Donna Griffiths)
Date: Sun, 16 May 2021 14:09:02 +0000
Subject: [crw-talk] Fw[2]: Demo
Message-ID: <embb086887-b2db-495e-92fd-803e8b0482e0@johnanddonna-pc>

Members, here is a link to Miked Peace's demo for the club yersterday.  
It may be viewed free for the next 14 days.  John



Also, I did record the session so will keep it available for 14 days. 
Here is the link.
Meeting Recording:
https://us02web.zoom.us/rec/share/nzVOHA1GCzI7Rnp2DV4NrmbWIow6H9eoBtUvalDA6dFg_Juco8iYEWX-LRUKLBbX.Z9QtBZpaWTv9OSGq

Michael Peace
356 Grand Ave
Suwanee, GA 30024
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210516/1a2153e9/attachment.html>

From griff at mwt.net  Sun May 16 10:14:32 2021
From: griff at mwt.net (John & Donna Griffiths)
Date: Sun, 16 May 2021 15:14:32 +0000
Subject: [crw-talk] Recent Demo
Message-ID: <em67c216cc-5fa3-4fed-834f-de7b82cb30a8@johnanddonna-pc>

Hello CRW members,

A while ago I sent out a note about the demo yesterday being available 
for viewing for a while.

To build on that, some of you know the club owns a Sorby texturing 
system and we are planning on having an outdoor in-person meeting in 
June at the Community Center (coffee crew, brace yourselves, I am 
planning to be there with a brand new travel cup) and...drum roll, I am 
trying to put together hands on round robin to give folks a chance to 
try out that and any other texturing tools people have and want to 
bring.  I have  a home made chatter tool that does not chatter, I may 
bring it and see if someone wiser than I can show me how to use it.

So Lord willing and the crick don't rise, we will be back on track soon, 
following whatever CDC guidelines are be in effect the day of.  Ladies 
and Gentlemen, start your lathes.

John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210516/518f78b4/attachment.html>

From rjpatros05 at gmail.com  Sun May 16 18:02:34 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Sun, 16 May 2021 18:02:34 -0500
Subject: [crw-talk] Recent Demo
In-Reply-To: <em67c216cc-5fa3-4fed-834f-de7b82cb30a8@johnanddonna-pc>
References: <em67c216cc-5fa3-4fed-834f-de7b82cb30a8@johnanddonna-pc>
Message-ID: <EC4D8BE8-5071-4630-BF34-AFEE2C5D0CB6@gmail.com>

I have used a needle scaler on many of my pieces and would be happy to demonstrate. However, I don?t have a small compressor and am not sure if a small one would have enough oomph. Does anyone have a small one I could use at the meeting? Really worth a try because it is a great enhancer. 

Sent from my iPhone

> On May 16, 2021, at 10:16 AM, John & Donna Griffiths <griff at mwt.net> wrote:
> 
> ? Hello CRW members,
> 
> A while ago I sent out a note about the demo yesterday being available for viewing for a while.
> 
> To build on that, some of you know the club owns a Sorby texturing system and we are planning on having an outdoor in-person meeting in June at the Community Center (coffee crew, brace yourselves, I am planning to be there with a brand new travel cup) and...drum roll, I am trying to put together hands on round robin to give folks a chance to try out that and any other texturing tools people have and want to bring.  I have  a home made chatter tool that does not chatter, I may bring it and see if someone wiser than I can show me how to use it.
> 
> So Lord willing and the crick don't rise, we will be back on track soon, following whatever CDC guidelines are be in effect the day of.  Ladies and Gentlemen, start your lathes.
> 
> John
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210516/1386184e/attachment.html>

From EganR at westerntc.edu  Sun May 16 18:58:37 2021
From: EganR at westerntc.edu (Egan, Richard)
Date: Sun, 16 May 2021 23:58:37 +0000
Subject: [crw-talk] Recent Demo
In-Reply-To: <EC4D8BE8-5071-4630-BF34-AFEE2C5D0CB6@gmail.com>
References: <em67c216cc-5fa3-4fed-834f-de7b82cb30a8@johnanddonna-pc>,
	<EC4D8BE8-5071-4630-BF34-AFEE2C5D0CB6@gmail.com>
Message-ID: <BN7PR03MB369903A3CBF9F48FB1643EA7A42E9@BN7PR03MB3699.namprd03.prod.outlook.com>

I have a small pancake one.



Sent from my Verizon, Samsung Galaxy smartphone



-------- Original message --------
From: Robert Patros <rjpatros05 at gmail.com>
Date: 5/16/21 6:03 PM (GMT-06:00)
To: John & Donna Griffiths <griff at mwt.net>, "Membership mailing list for the AAW Chapter Coulee Region Woodturners." <crw-talk at crwoodturner.com>
Subject: Re: [crw-talk] Recent Demo

CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe.

I have used a needle scaler on many of my pieces and would be happy to demonstrate. However, I don?t have a small compressor and am not sure if a small one would have enough oomph. Does anyone have a small one I could use at the meeting? Really worth a try because it is a great enhancer.

Sent from my iPhone

On May 16, 2021, at 10:16 AM, John & Donna Griffiths <griff at mwt.net> wrote:

? Hello CRW members,

A while ago I sent out a note about the demo yesterday being available for viewing for a while.

To build on that, some of you know the club owns a Sorby texturing system and we are planning on having an outdoor in-person meeting in June at the Community Center (coffee crew, brace yourselves, I am planning to be there with a brand new travel cup) and...drum roll, I am trying to put together hands on round robin to give folks a chance to try out that and any other texturing tools people have and want to bring.  I have  a home made chatter tool that does not chatter, I may bring it and see if someone wiser than I can show me how to use it.

So Lord willing and the crick don't rise, we will be back on track soon, following whatever CDC guidelines are be in effect the day of.  Ladies and Gentlemen, start your lathes.

John
_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210516/988ab10d/attachment.html>

From rjpatros05 at gmail.com  Sun May 16 19:26:00 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Sun, 16 May 2021 19:26:00 -0500
Subject: [crw-talk] Recent Demo
In-Reply-To: <BN7PR03MB369903A3CBF9F48FB1643EA7A42E9@BN7PR03MB3699.namprd03.prod.outlook.com>
References: <BN7PR03MB369903A3CBF9F48FB1643EA7A42E9@BN7PR03MB3699.namprd03.prod.outlook.com>
Message-ID: <EA3FDC95-92E8-4D7D-8425-1BD0F0D41672@gmail.com>

Thanks, Rich! I?ll bring the scaler, 

Sent from my iPhone

> On May 16, 2021, at 7:00 PM, Egan, Richard <EganR at westerntc.edu> wrote:
> 
> ?
> I have a small pancake one.
> 
> 
> 
> Sent from my Verizon, Samsung Galaxy smartphone
> 
> 
> 
> -------- Original message --------
> From: Robert Patros <rjpatros05 at gmail.com>
> Date: 5/16/21 6:03 PM (GMT-06:00)
> To: John & Donna Griffiths <griff at mwt.net>, "Membership mailing list for the AAW Chapter Coulee Region Woodturners." <crw-talk at crwoodturner.com>
> Subject: Re: [crw-talk] Recent Demo
> 
> CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe.
> 
> I have used a needle scaler on many of my pieces and would be happy to demonstrate. However, I don?t have a small compressor and am not sure if a small one would have enough oomph. Does anyone have a small one I could use at the meeting? Really worth a try because it is a great enhancer. 
> 
> Sent from my iPhone
> 
>>> On May 16, 2021, at 10:16 AM, John & Donna Griffiths <griff at mwt.net> wrote:
>>> 
>> ? Hello CRW members,
>> 
>> A while ago I sent out a note about the demo yesterday being available for viewing for a while.
>> 
>> To build on that, some of you know the club owns a Sorby texturing system and we are planning on having an outdoor in-person meeting in June at the Community Center (coffee crew, brace yourselves, I am planning to be there with a brand new travel cup) and...drum roll, I am trying to put together hands on round robin to give folks a chance to try out that and any other texturing tools people have and want to bring.  I have  a home made chatter tool that does not chatter, I may bring it and see if someone wiser than I can show me how to use it.
>> 
>> So Lord willing and the crick don't rise, we will be back on track soon, following whatever CDC guidelines are be in effect the day of.  Ladies and Gentlemen, start your lathes.
>> 
>> John
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210516/007d345e/attachment.html>

From wisawdust at charter.net  Sun May 16 20:05:53 2021
From: wisawdust at charter.net (wisawdust)
Date: Sun, 16 May 2021 20:05:53 -0500
Subject: [crw-talk] Recent Demo
In-Reply-To: <EC4D8BE8-5071-4630-BF34-AFEE2C5D0CB6@gmail.com>
Message-ID: <mailman.1.1621213580.932717.crw-talk_crwoodturner.com@crwoodturner.com>

Bob, I have a small one, alsoSent from my Galaxy
-------- Original message --------From: Robert Patros <rjpatros05 at gmail.com> Date: 5/16/21  6:03 PM  (GMT-06:00) To: John & Donna Griffiths <griff at mwt.net>, "Membership mailing list for the AAW Chapter Coulee Region	Woodturners." <crw-talk at crwoodturner.com> Subject: Re: [crw-talk] Recent Demo I have used a needle scaler on many of my pieces and would be happy to demonstrate. However, I don?t have a small compressor and am not sure if a small one would have enough oomph. Does anyone have a small one I could use at the meeting? Really worth a try because it is a great enhancer.?Sent from my iPhoneOn May 16, 2021, at 10:16 AM, John & Donna Griffiths <griff at mwt.net> wrote:?

 
blockquote.cite { margin-left: 5px; margin-right: 0px; padding-left: 10px; padding-right:0px; border-left: 1px solid #cccccc }
blockquote.cite2 {margin-left: 5px; margin-right: 0px; padding-left: 10px; padding-right:0px; border-left: 1px solid #cccccc; margin-top: 3px; padding-top: 0px; }
a img { border: 0px; }
li[style='text-align: center;'], li[style='text-align: center; '], li[style='text-align: right;'], li[style='text-align: right; '] {  list-style-position: inside;}
body { font-family: Segoe UI; font-size: 12pt;   } 
.quote { margin-left: 1em; margin-right: 1em; border-left: 5px #ebebeb solid; padding-left: 0.3em; }
 

Hello CRW members,A while ago I sent out a note about the demo yesterday being available for viewing for a while.To build on that, some of you know the club owns a Sorby texturing system and we are planning on having an outdoor in-person meeting in June at the Community Center (coffee crew, brace yourselves, I am planning to be there with a brand new travel cup) and...drum roll, I am trying to put together hands on round robin to give folks a chance to try out that and any other texturing tools people have and want to bring.? I have? a home made chatter tool that does not chatter, I may bring it and see if someone wiser than I can show me how to use it.So Lord willing and the crick don't rise, we will be back on track soon, following whatever CDC guidelines are be in effect the day of.? Ladies and Gentlemen, start your lathes.John_________________________________________Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.______crw-talk mailing listcrw-talk at crwoodturner.comhttp://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.comCheck the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210516/23f7b41f/attachment.html>

From rjpatros05 at gmail.com  Mon May 17 06:10:10 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Mon, 17 May 2021 06:10:10 -0500
Subject: [crw-talk] Recent Demo
In-Reply-To: <60a1c1eb.1c69fb81.1fc3c.27fdSMTPIN_ADDED_MISSING@mx.google.com>
References: <60a1c1eb.1c69fb81.1fc3c.27fdSMTPIN_ADDED_MISSING@mx.google.com>
Message-ID: <C631B6CA-50BC-4462-90A6-25D34DC2D7D4@gmail.com>

Thanks! 

Sent from my iPhone

> On May 16, 2021, at 8:07 PM, wisawdust <wisawdust at charter.net> wrote:
> 
> ?
> Bob, I have a small one, also
> 
> 
> 
> Sent from my Galaxy
> 
> 
> -------- Original message --------
> From: Robert Patros <rjpatros05 at gmail.com>
> Date: 5/16/21 6:03 PM (GMT-06:00)
> To: John & Donna Griffiths <griff at mwt.net>, "Membership mailing list for the AAW Chapter Coulee Region Woodturners." <crw-talk at crwoodturner.com>
> Subject: Re: [crw-talk] Recent Demo
> 
> I have used a needle scaler on many of my pieces and would be happy to demonstrate. However, I don?t have a small compressor and am not sure if a small one would have enough oomph. Does anyone have a small one I could use at the meeting? Really worth a try because it is a great enhancer. 
> 
> Sent from my iPhone
> 
>>> On May 16, 2021, at 10:16 AM, John & Donna Griffiths <griff at mwt.net> wrote:
>>> 
>> ? Hello CRW members,
>> 
>> A while ago I sent out a note about the demo yesterday being available for viewing for a while.
>> 
>> To build on that, some of you know the club owns a Sorby texturing system and we are planning on having an outdoor in-person meeting in June at the Community Center (coffee crew, brace yourselves, I am planning to be there with a brand new travel cup) and...drum roll, I am trying to put together hands on round robin to give folks a chance to try out that and any other texturing tools people have and want to bring.  I have  a home made chatter tool that does not chatter, I may bring it and see if someone wiser than I can show me how to use it.
>> 
>> So Lord willing and the crick don't rise, we will be back on track soon, following whatever CDC guidelines are be in effect the day of.  Ladies and Gentlemen, start your lathes.
>> 
>> John
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210517/24eee625/attachment.html>

From rjpatros05 at gmail.com  Mon May 17 06:49:04 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Mon, 17 May 2021 06:49:04 -0500
Subject: [crw-talk] Recent Demo
In-Reply-To: <C631B6CA-50BC-4462-90A6-25D34DC2D7D4@gmail.com>
References: <C631B6CA-50BC-4462-90A6-25D34DC2D7D4@gmail.com>
Message-ID: <607D8872-0924-4A7A-BB23-EB8AB688983B@gmail.com>

I think Rich is planning to bring his compressor but if that falls through, you?re my backup! Thanks again!!

I will bring an example of a finished handle I made years ago and applied this technique. I have used it quite a bit in bowls but have given them all away. I?ll try to finish one so people can see the final product. Will also bring a couple bowls in progress for everyone to use the tool. 

I will want to secure it to the lathe while people use the tool. Much easier that way to get good results.

Sent from my iPhone

> On May 17, 2021, at 6:10 AM, Robert Patros <rjpatros05 at gmail.com> wrote:
> 
> ?Thanks! 
> 
> Sent from my iPhone
> 
>>> On May 16, 2021, at 8:07 PM, wisawdust <wisawdust at charter.net> wrote:
>>> 
>> ?
>> Bob, I have a small one, also
>> 
>> 
>> 
>> Sent from my Galaxy
>> 
>> 
>> -------- Original message --------
>> From: Robert Patros <rjpatros05 at gmail.com>
>> Date: 5/16/21 6:03 PM (GMT-06:00)
>> To: John & Donna Griffiths <griff at mwt.net>, "Membership mailing list for the AAW Chapter Coulee Region Woodturners." <crw-talk at crwoodturner.com>
>> Subject: Re: [crw-talk] Recent Demo
>> 
>> I have used a needle scaler on many of my pieces and would be happy to demonstrate. However, I don?t have a small compressor and am not sure if a small one would have enough oomph. Does anyone have a small one I could use at the meeting? Really worth a try because it is a great enhancer. 
>> 
>> Sent from my iPhone
>> 
>>>> On May 16, 2021, at 10:16 AM, John & Donna Griffiths <griff at mwt.net> wrote:
>>>> 
>>> ? Hello CRW members,
>>> 
>>> A while ago I sent out a note about the demo yesterday being available for viewing for a while.
>>> 
>>> To build on that, some of you know the club owns a Sorby texturing system and we are planning on having an outdoor in-person meeting in June at the Community Center (coffee crew, brace yourselves, I am planning to be there with a brand new travel cup) and...drum roll, I am trying to put together hands on round robin to give folks a chance to try out that and any other texturing tools people have and want to bring.  I have  a home made chatter tool that does not chatter, I may bring it and see if someone wiser than I can show me how to use it.
>>> 
>>> So Lord willing and the crick don't rise, we will be back on track soon, following whatever CDC guidelines are be in effect the day of.  Ladies and Gentlemen, start your lathes.
>>> 
>>> John
>>> _________________________________________
>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>>> ______
>>> crw-talk mailing list
>>> crw-talk at crwoodturner.com
>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210517/30d5aad3/attachment.html>

From EganR at westerntc.edu  Mon May 17 09:55:51 2021
From: EganR at westerntc.edu (Egan, Richard)
Date: Mon, 17 May 2021 14:55:51 +0000
Subject: [crw-talk] mike peace... what time? ken g
In-Reply-To: <C867F7D9-8DE4-4777-A43E-36EF572C91CD@gmail.com>
References: <60a01281.1c69fb81.82c9a.5f5cSMTPIN_ADDED_MISSING@mx.google.com>
	<C867F7D9-8DE4-4777-A43E-36EF572C91CD@gmail.com>
Message-ID: <BN7PR03MB3699A7961AAB4CD0FC1BA868A42D9@BN7PR03MB3699.namprd03.prod.outlook.com>

Ginny:

That?s a pretty thin spindle for its length. I?m not sure what the chair is made out of, but I would want to use hard clear maple to make those spindles. I would make them a little long, so someone could trim them to length and fit in the chair. The challenge will be staining and trying to match that old existing patina. I?m not very good at that.

Rich Egan

From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Virginia Wintersteen
Sent: Saturday, May 15, 2021 4:10 PM
To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. <crw-talk at crwoodturner.com>
Subject: Re: [crw-talk] mike peace... what time? ken g

CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe.

Here is a picture of the chair and spindles[cid:image001.jpg at 01D74B01.4BB6CA40][cid:image002.jpg at 01D74B01.4BB6CA40][cid:image003.jpg at 01D74B01.4BB6CA40][cid:image004.jpg at 01D74B01.4BB6CA40]
Sent from my iPhone


On May 15, 2021, at 1:27 PM, wisawdust <wisawdust at charter.net<mailto:wisawdust at charter.net>> wrote:
?
As Aaron said, size, species.  Also if they have a pic or vfc the broken part would be helpful.



Sent from my Galaxy


-------- Original message --------
From: Virginia Wintersteen <vgwintersteen at gmail.com<mailto:vgwintersteen at gmail.com>>
Date: 5/15/21 11:40 AM (GMT-06:00)
To: "Membership mailing list for the AAW Chapter Coulee Region Woodturners." <crw-talk at crwoodturner.com<mailto:crw-talk at crwoodturner.com>>
Subject: Re: [crw-talk] mike peace... what time? ken g

I have a request from a friend who has a family heirloom child?s rocking chair that is missing one or two back spindles. Could someone make some new matching spindles?

Thanks
Ginny
608-317-6719
Sent from my iPhone


On May 15, 2021, at 8:33 AM, James Bloomer <marine9096 at gmail.com<mailto:marine9096 at gmail.com>> wrote:
?
0900

On Sat, May 15, 2021, 08:25 Ken Nancy <gardens53581 at gmail.com<mailto:gardens53581 at gmail.com>> wrote:

_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com<mailto:crw-talk at crwoodturner.com>
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com<mailto:crw-talk at crwoodturner.com>
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com<mailto:crw-talk at crwoodturner.com>
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210517/c0b63057/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 147680 bytes
Desc: image001.jpg
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210517/c0b63057/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.jpg
Type: image/jpeg
Size: 174433 bytes
Desc: image002.jpg
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210517/c0b63057/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 185264 bytes
Desc: image003.jpg
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210517/c0b63057/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.jpg
Type: image/jpeg
Size: 186536 bytes
Desc: image004.jpg
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210517/c0b63057/attachment-0003.jpg>

From EganR at westerntc.edu  Mon May 17 12:06:35 2021
From: EganR at westerntc.edu (Egan, Richard)
Date: Mon, 17 May 2021 17:06:35 +0000
Subject: [crw-talk] FW: Crotches
In-Reply-To: <BN7PR03MB36994D8078A1695A0DDFD712A42D9@BN7PR03MB3699.namprd03.prod.outlook.com>
References: <BN7PR03MB36994D8078A1695A0DDFD712A42D9@BN7PR03MB3699.namprd03.prod.outlook.com>
Message-ID: <BN7PR03MB36994FC61EA0F05DB0DA6F34A42D9@BN7PR03MB3699.namprd03.prod.outlook.com>

Members:

I would seem I have a crotch problem. No, not that kind of crotches.
I had to relocate my wood storage box to another place in my yard. In the process, I decided I probably have more walnut crotches than I really need. I have had these a while, and they were all sealed when cut green, so I think you could store them for a while without any worries.
I am not going to bring these in for a club wood swap as I don?t want to haul them. If you would like to take some home for your crotch selection, get in touch with me.

Thanks,

Rich Egan

Kevin Vossler ? that one half log is about 28? long. Not sure if that is long enough for flutes?

From: Egan, Richard <EganR at westerntc.edu>
Sent: Monday, May 17, 2021 11:52 AM
To: Egan, Richard <EganR at westerntc.edu>
Subject: Crotches





Sent from my Verizon, Samsung Galaxy smartphone

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210517/049cb6cb/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20210516_185558_resized.jpg
Type: image/jpeg
Size: 1371148 bytes
Desc: 20210516_185558_resized.jpg
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210517/049cb6cb/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20210516_174537_resized.jpg
Type: image/jpeg
Size: 1204925 bytes
Desc: 20210516_174537_resized.jpg
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210517/049cb6cb/attachment-0001.jpg>

From mogoldfish at yahoo.com  Mon May 17 12:54:14 2021
From: mogoldfish at yahoo.com (Kristine Clough)
Date: Mon, 17 May 2021 17:54:14 +0000 (UTC)
Subject: [crw-talk] mike peace... what time? ken g
In-Reply-To: <BN7PR03MB3699A7961AAB4CD0FC1BA868A42D9@BN7PR03MB3699.namprd03.prod.outlook.com>
References: <60a01281.1c69fb81.82c9a.5f5cSMTPIN_ADDED_MISSING@mx.google.com>
	<C867F7D9-8DE4-4777-A43E-36EF572C91CD@gmail.com>
	<BN7PR03MB3699A7961AAB4CD0FC1BA868A42D9@BN7PR03MB3699.namprd03.prod.outlook.com>
Message-ID: <1543718871.1549941.1621274054196@mail.yahoo.com>

As an FYI, you can generally take an existing part to any store that mixes paints and finishes and they can get a pretty close match.? Another option is to replace all of the spindles on the chair and the new finish won't stick out.
Kris

Sent from Yahoo Mail on Android 
 
  On Mon, May 17, 2021 at 9:57 AM, Egan, Richard<EganR at westerntc.edu> wrote:   _________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210517/bb795307/attachment.html>

From rjpatros05 at gmail.com  Mon May 17 16:06:40 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Mon, 17 May 2021 16:06:40 -0500
Subject: [crw-talk] FW: Crotches
In-Reply-To: <BN7PR03MB36994FC61EA0F05DB0DA6F34A42D9@BN7PR03MB3699.namprd03.prod.outlook.com>
References: <BN7PR03MB36994FC61EA0F05DB0DA6F34A42D9@BN7PR03MB3699.namprd03.prod.outlook.com>
Message-ID: <BEB8BC04-B535-4A96-B7AE-BF581D2E18FF@gmail.com>

Thanks, Rich! I?d like one. 
Bob

Sent from my iPhone

> On May 17, 2021, at 12:11 PM, Egan, Richard <EganR at westerntc.edu> wrote:
> 
> ?
> Members:
>  
> I would seem I have a crotch problem. No, not that kind of crotches.
> I had to relocate my wood storage box to another place in my yard. In the process, I decided I probably have more walnut crotches than I really need. I have had these a while, and they were all sealed when cut green, so I think you could store them for a while without any worries.
> I am not going to bring these in for a club wood swap as I don?t want to haul them. If you would like to take some home for your crotch selection, get in touch with me.
>  
> Thanks,
>  
> Rich Egan
>  
> Kevin Vossler ? that one half log is about 28? long. Not sure if that is long enough for flutes?
>  
> From: Egan, Richard <EganR at westerntc.edu> 
> Sent: Monday, May 17, 2021 11:52 AM
> To: Egan, Richard <EganR at westerntc.edu>
> Subject: Crotches
>  
>  
>  
>  
>  
> Sent from my Verizon, Samsung Galaxy smartphone
>  
> <20210516_185558_resized.jpg>
> <20210516_174537_resized.jpg>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210517/4ec466b0/attachment.html>

From marine9096 at gmail.com  Tue May 18 21:24:21 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Tue, 18 May 2021 21:24:21 -0500
Subject: [crw-talk] Board meeting and social visit.
Message-ID: <CAGK6+hAXB_vqVSnM+nVsYskf1_kLA_ZtZhmtaP_aNR-iJ9AUew@mail.gmail.com>

Good evening. Would like to have a board meeting followed by social hour.
6-630 board meeting 630-730 or so for social visit this Thursday.

Thoughts?

In service
Jim Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210518/8fff232b/attachment.html>

From adrian.novak at charter.net  Tue May 18 21:46:54 2021
From: adrian.novak at charter.net (Adrian Novak)
Date: Tue, 18 May 2021 21:46:54 -0500
Subject: [crw-talk] Board meeting and social visit.
In-Reply-To: <CAGK6+hAXB_vqVSnM+nVsYskf1_kLA_ZtZhmtaP_aNR-iJ9AUew@mail.gmail.com>
Message-ID: <e12dbafe-6b51-46f6-9a72-c04774f6c84e@Porters-Phone-hehe>

     
 

 
 
 
 Face to face or screen to screen?
 
 
 

 
 
>  
> On May 18, 2021 at 9:25 PM,  <James Bloomer (mailto:marine9096 at gmail.com)>  wrote:
>  
>  
>  
> Good   evening. Would like to have a board   meeting followed by social hour.    
> 6-630 board meeting 630-730 or so for social visit   this Thursday (x-apple-data-detectors://1).  
>  
>
>  
> Thoughts?
>  
>
>  
> In service
>  
> Jim Bloomer
>  
>
>  
>
>                
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210518/c984f81b/attachment.html>

From marine9096 at gmail.com  Tue May 18 21:52:49 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Tue, 18 May 2021 21:52:49 -0500
Subject: [crw-talk] Board meeting and social visit.
In-Reply-To: <e12dbafe-6b51-46f6-9a72-c04774f6c84e@Porters-Phone-hehe>
References: <CAGK6+hAXB_vqVSnM+nVsYskf1_kLA_ZtZhmtaP_aNR-iJ9AUew@mail.gmail.com>
	<e12dbafe-6b51-46f6-9a72-c04774f6c84e@Porters-Phone-hehe>
Message-ID: <CAGK6+hBm7KzaUB6PaFVtOXzwtD0SOjT4kCyEKK7b-n2EML3ZFQ@mail.gmail.com>

Screen to screen unfortunately. Still looking at a social distancing
meeting for June. Will be utilizing the pavilion near the center.

On Tue, May 18, 2021, 21:46 Adrian Novak <adrian.novak at charter.net> wrote:

>
> Face to face or screen to screen?
>
>
> On May 18, 2021 at 9:25 PM, <James Bloomer <marine9096 at gmail.com>> wrote:
>
> Good evening. Would like to have a board meeting followed by social hour.
> 6-630 board meeting 630-730 or so for social visit this Thursday.
>
> Thoughts?
>
> In service
> Jim Bloomer
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210518/abb60e79/attachment.html>

From jdcrow1956 at yahoo.com  Tue May 18 21:58:48 2021
From: jdcrow1956 at yahoo.com (John Fisher)
Date: Wed, 19 May 2021 02:58:48 +0000 (UTC)
Subject: [crw-talk] Board meeting and social visit.
In-Reply-To: <CAGK6+hAXB_vqVSnM+nVsYskf1_kLA_ZtZhmtaP_aNR-iJ9AUew@mail.gmail.com>
References: <CAGK6+hAXB_vqVSnM+nVsYskf1_kLA_ZtZhmtaP_aNR-iJ9AUew@mail.gmail.com>
Message-ID: <1307329722.104265.1621393128826@mail.yahoo.com>

 I can not do Thursdays.? I do league trap shooting on Thursday nights.? I can do most any other night at that time.? I have done this for 30 years or so and have team members that depend that I be there during this time.?
    On Tuesday, May 18, 2021, 09:26:36 PM CDT, James Bloomer <marine9096 at gmail.com> wrote:  
 
 Good?evening. Would like to have a board?meeting followed by social hour.?6-630 board meeting 630-730 or so for social visit this Thursday.?
Thoughts?
In serviceJim Bloomer

_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210519/a23751e9/attachment.html>

From marine9096 at gmail.com  Wed May 19 21:59:42 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Wed, 19 May 2021 21:59:42 -0500
Subject: [crw-talk] Board meeting and social hour
Message-ID: <CAGK6+hD9u5Mtd35zdS1vgbEEunAdmNvKQBArbTKFe9ufnaEAmA@mail.gmail.com>

Good evening here is the link for tomorrow's meeting. Starts at 6 pm
6-630 board meeting
630-730? Social hour

James Bloomer is inviting you to a scheduled Zoom meeting.

Topic: Coulee Region Woodturners
Time: May 20, 2021 06:00 PM Central Time (US and Canada)

Join Zoom Meeting
https://us02web.zoom.us/j/8076430043?pwd=ajdBSnlOUVpkcEJndnQ5TTMzQ1pQdz09

Meeting ID: 807 643 0043
Passcode: 836573
One tap mobile
+13126266799,,8076430043#,,,,*836573# US (Chicago)
+19292056099,,8076430043#,,,,*836573# US (New York)

Dial by your location
        +1 312 626 6799 US (Chicago)
        +1 929 205 6099 US (New York)
        +1 301 715 8592 US (Washington DC)
        +1 346 248 7799 US (Houston)
        +1 669 900 6833 US (San Jose)
        +1 253 215 8782 US (Tacoma)
Meeting ID: 807 643 0043
Passcode: 836573
Find your local number: https://us02web.zoom.us/u/kfQHOzLdd
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210519/a7e5abe6/attachment.html>

From marine9096 at gmail.com  Thu May 20 14:47:37 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Thu, 20 May 2021 14:47:37 -0500
Subject: [crw-talk] Fwd: Board meeting and social hour
In-Reply-To: <CAGK6+hD9u5Mtd35zdS1vgbEEunAdmNvKQBArbTKFe9ufnaEAmA@mail.gmail.com>
References: <CAGK6+hD9u5Mtd35zdS1vgbEEunAdmNvKQBArbTKFe9ufnaEAmA@mail.gmail.com>
Message-ID: <CAGK6+hCPwYaE4K5yi0TYJaGuphAmq60ePTLFELsRpk8GEQSGsw@mail.gmail.com>

Resending link, starts at 6pm

---------- Forwarded message ---------
From: James Bloomer <marine9096 at gmail.com>
Date: Wed, May 19, 2021, 21:59
Subject: Board meeting and social hour
To: CRW talk <crw-talk at crwoodturner.com>


Good evening here is the link for tomorrow's meeting. Starts at 6 pm
6-630 board meeting
630-730? Social hour

James Bloomer is inviting you to a scheduled Zoom meeting.

Topic: Coulee Region Woodturners
Time: May 20, 2021 06:00 PM Central Time (US and Canada)

Join Zoom Meeting
https://us02web.zoom.us/j/8076430043?pwd=ajdBSnlOUVpkcEJndnQ5TTMzQ1pQdz09

Meeting ID: 807 643 0043
Passcode: 836573
One tap mobile
+13126266799,,8076430043#,,,,*836573# US (Chicago)
+19292056099,,8076430043#,,,,*836573# US (New York)

Dial by your location
        +1 312 626 6799 US (Chicago)
        +1 929 205 6099 US (New York)
        +1 301 715 8592 US (Washington DC)
        +1 346 248 7799 US (Houston)
        +1 669 900 6833 US (San Jose)
        +1 253 215 8782 US (Tacoma)
Meeting ID: 807 643 0043
Passcode: 836573
Find your local number: https://us02web.zoom.us/u/kfQHOzLdd
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210520/8580ba22/attachment.html>

From aaronagesicki at gmail.com  Thu May 20 15:47:21 2021
From: aaronagesicki at gmail.com (aaronagesicki at gmail.com)
Date: Thu, 20 May 2021 15:47:21 -0500
Subject: [crw-talk] Fwd: Board meeting and social hour
In-Reply-To: <CAGK6+hCPwYaE4K5yi0TYJaGuphAmq60ePTLFELsRpk8GEQSGsw@mail.gmail.com>
References: <CAGK6+hD9u5Mtd35zdS1vgbEEunAdmNvKQBArbTKFe9ufnaEAmA@mail.gmail.com>
	<CAGK6+hCPwYaE4K5yi0TYJaGuphAmq60ePTLFELsRpk8GEQSGsw@mail.gmail.com>
Message-ID: <0d9901d74db9$552fe650$ff8fb2f0$@gmail.com>

So ?.
Is it tomorrow, or today?
 
 
Aaron Gesicki
 
 
 
From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of James Bloomer
Sent: Thursday, May 20, 2021 2:48 PM
To: CRW talk <crw-talk at crwoodturner.com>
Subject: [crw-talk] Fwd: Board meeting and social hour
 
Resending link, starts at 6pm
---------- Forwarded message ---------
From: James Bloomer <marine9096 at gmail.com <mailto:marine9096 at gmail.com> >
Date: Wed, May 19, 2021, 21:59
Subject: Board meeting and social hour
To: CRW talk <crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> >
 
Good evening here is the link for tomorrow's meeting. Starts at 6 pm
6-630 board meeting
630-730? Social hour
 
James Bloomer is inviting you to a scheduled Zoom meeting.
 
Topic: Coulee Region Woodturners
Time: May 20, 2021 06:00 PM Central Time (US and Canada)
 
Join Zoom Meeting
https://us02web.zoom.us/j/8076430043?pwd=ajdBSnlOUVpkcEJndnQ5TTMzQ1pQdz09
 
Meeting ID: 807 643 0043
Passcode: 836573
One tap mobile
+13126266799,,8076430043#,,,,*836573# US (Chicago)
+19292056099,,8076430043#,,,,*836573# US (New York)
 
Dial by your location
        +1 312 626 6799 US (Chicago)
        +1 929 205 6099 US (New York)
        +1 301 715 8592 US (Washington DC)
        +1 346 248 7799 US (Houston)
        +1 669 900 6833 US (San Jose)
        +1 253 215 8782 US (Tacoma)
Meeting ID: 807 643 0043
Passcode: 836573
Find your local number: https://us02web.zoom.us/u/kfQHOzLdd
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210520/6c9c649a/attachment.html>

From EganR at westerntc.edu  Thu May 20 15:50:37 2021
From: EganR at westerntc.edu (Egan, Richard)
Date: Thu, 20 May 2021 20:50:37 +0000
Subject: [crw-talk] Fwd: Board meeting and social hour
In-Reply-To: <0d9901d74db9$552fe650$ff8fb2f0$@gmail.com>
References: <CAGK6+hD9u5Mtd35zdS1vgbEEunAdmNvKQBArbTKFe9ufnaEAmA@mail.gmail.com>
	<CAGK6+hCPwYaE4K5yi0TYJaGuphAmq60ePTLFELsRpk8GEQSGsw@mail.gmail.com>
	<0d9901d74db9$552fe650$ff8fb2f0$@gmail.com>
Message-ID: <BN7PR03MB3699C75E7CC37403733C217BA42A9@BN7PR03MB3699.namprd03.prod.outlook.com>

Original link sent Weds for Thurs. Link resent today, but not changed, so I assume original date (today) still stands.

From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of aaronagesicki at gmail.com
Sent: Thursday, May 20, 2021 3:47 PM
To: 'Membership mailing list for the AAW Chapter Coulee Region Woodturners.' <crw-talk at crwoodturner.com>
Subject: Re: [crw-talk] Fwd: Board meeting and social hour

CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe.

So ?.
Is it tomorrow, or today?


Aaron Gesicki



From: crw-talk <crw-talk-bounces at crwoodturner.com<mailto:crw-talk-bounces at crwoodturner.com>> On Behalf Of James Bloomer
Sent: Thursday, May 20, 2021 2:48 PM
To: CRW talk <crw-talk at crwoodturner.com<mailto:crw-talk at crwoodturner.com>>
Subject: [crw-talk] Fwd: Board meeting and social hour

Resending link, starts at 6pm
---------- Forwarded message ---------
From: James Bloomer <marine9096 at gmail.com<mailto:marine9096 at gmail.com>>
Date: Wed, May 19, 2021, 21:59
Subject: Board meeting and social hour
To: CRW talk <crw-talk at crwoodturner.com<mailto:crw-talk at crwoodturner.com>>

Good evening here is the link for tomorrow's meeting. Starts at 6 pm
6-630 board meeting
630-730? Social hour

James Bloomer is inviting you to a scheduled Zoom meeting.

Topic: Coulee Region Woodturners
Time: May 20, 2021 06:00 PM Central Time (US and Canada)

Join Zoom Meeting
https://us02web.zoom.us/j/8076430043?pwd=ajdBSnlOUVpkcEJndnQ5TTMzQ1pQdz09

Meeting ID: 807 643 0043
Passcode: 836573
One tap mobile
+13126266799,,8076430043#,,,,*836573# US (Chicago)
+19292056099,,8076430043#,,,,*836573# US (New York)

Dial by your location
        +1 312 626 6799 US (Chicago)
        +1 929 205 6099 US (New York)
        +1 301 715 8592 US (Washington DC)
        +1 346 248 7799 US (Houston)
        +1 669 900 6833 US (San Jose)
        +1 253 215 8782 US (Tacoma)
Meeting ID: 807 643 0043
Passcode: 836573
Find your local number: https://us02web.zoom.us/u/kfQHOzLdd


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210520/80482517/attachment.html>

From aaronagesicki at gmail.com  Thu May 20 15:57:52 2021
From: aaronagesicki at gmail.com (aaronagesicki at gmail.com)
Date: Thu, 20 May 2021 15:57:52 -0500
Subject: [crw-talk] Fwd: Board meeting and social hour
In-Reply-To: <BN7PR03MB3699C75E7CC37403733C217BA42A9@BN7PR03MB3699.namprd03.prod.outlook.com>
References: <CAGK6+hD9u5Mtd35zdS1vgbEEunAdmNvKQBArbTKFe9ufnaEAmA@mail.gmail.com>	<CAGK6+hCPwYaE4K5yi0TYJaGuphAmq60ePTLFELsRpk8GEQSGsw@mail.gmail.com>	<0d9901d74db9$552fe650$ff8fb2f0$@gmail.com>
	<BN7PR03MB3699C75E7CC37403733C217BA42A9@BN7PR03MB3699.namprd03.prod.outlook.com>
Message-ID: <0e3e01d74dba$cd429e70$67c7db50$@gmail.com>

Got it. Tonight. 
 
 
Aaron Gesicki
 
 
 
From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Egan, Richard
Sent: Thursday, May 20, 2021 3:51 PM
To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. <crw-talk at crwoodturner.com>
Subject: Re: [crw-talk] Fwd: Board meeting and social hour
 
Original link sent Weds for Thurs. Link resent today, but not changed, so I assume original date (today) still stands.
 
From: crw-talk <crw-talk-bounces at crwoodturner.com <mailto:crw-talk-bounces at crwoodturner.com> > On Behalf Of aaronagesicki at gmail.com <mailto:aaronagesicki at gmail.com> 
Sent: Thursday, May 20, 2021 3:47 PM
To: 'Membership mailing list for the AAW Chapter Coulee Region Woodturners.' <crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> >
Subject: Re: [crw-talk] Fwd: Board meeting and social hour
 
CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe.
 
So ?.
Is it tomorrow, or today?
 
 
Aaron Gesicki
 
 
 
From: crw-talk <crw-talk-bounces at crwoodturner.com <mailto:crw-talk-bounces at crwoodturner.com> > On Behalf Of James Bloomer
Sent: Thursday, May 20, 2021 2:48 PM
To: CRW talk <crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> >
Subject: [crw-talk] Fwd: Board meeting and social hour
 
Resending link, starts at 6pm
---------- Forwarded message ---------
From: James Bloomer <marine9096 at gmail.com <mailto:marine9096 at gmail.com> >
Date: Wed, May 19, 2021, 21:59
Subject: Board meeting and social hour
To: CRW talk <crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> >
 
Good evening here is the link for tomorrow's meeting. Starts at 6 pm
6-630 board meeting
630-730? Social hour
 
James Bloomer is inviting you to a scheduled Zoom meeting.
 
Topic: Coulee Region Woodturners
Time: May 20, 2021 06:00 PM Central Time (US and Canada)
 
Join Zoom Meeting
https://us02web.zoom.us/j/8076430043?pwd=ajdBSnlOUVpkcEJndnQ5TTMzQ1pQdz09
 
Meeting ID: 807 643 0043
Passcode: 836573
One tap mobile
+13126266799,,8076430043#,,,,*836573# US (Chicago)
+19292056099,,8076430043#,,,,*836573# US (New York)
 
Dial by your location
        +1 312 626 6799 US (Chicago)
        +1 929 205 6099 US (New York)
        +1 301 715 8592 US (Washington DC)
        +1 346 248 7799 US (Houston)
        +1 669 900 6833 US (San Jose)
        +1 253 215 8782 US (Tacoma)
Meeting ID: 807 643 0043
Passcode: 836573
Find your local number: https://us02web.zoom.us/u/kfQHOzLdd
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210520/47e21317/attachment.html>

From marine9096 at gmail.com  Thu May 20 16:52:03 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Thu, 20 May 2021 16:52:03 -0500
Subject: [crw-talk] Fwd: Board meeting and social hour
In-Reply-To: <0d9901d74db9$552fe650$ff8fb2f0$@gmail.com>
References: <CAGK6+hD9u5Mtd35zdS1vgbEEunAdmNvKQBArbTKFe9ufnaEAmA@mail.gmail.com>
	<CAGK6+hCPwYaE4K5yi0TYJaGuphAmq60ePTLFELsRpk8GEQSGsw@mail.gmail.com>
	<0d9901d74db9$552fe650$ff8fb2f0$@gmail.com>
Message-ID: <CAGK6+hDgmD2XnB2ziSZq99bhHx62XgSCsiAUdapzUM_vs=LtaQ@mail.gmail.com>

Today

On Thu, May 20, 2021, 15:49 <aaronagesicki at gmail.com> wrote:

> So ?.
>
> Is it tomorrow, or today?
>
>
>
>
>
> Aaron Gesicki
>
>
>
>
>
>
>
> *From:* crw-talk <crw-talk-bounces at crwoodturner.com> *On Behalf Of *James
> Bloomer
> *Sent:* Thursday, May 20, 2021 2:48 PM
> *To:* CRW talk <crw-talk at crwoodturner.com>
> *Subject:* [crw-talk] Fwd: Board meeting and social hour
>
>
>
> Resending link, starts at 6pm
>
> ---------- Forwarded message ---------
> From: *James Bloomer* <marine9096 at gmail.com>
> Date: Wed, May 19, 2021, 21:59
> Subject: Board meeting and social hour
> To: CRW talk <crw-talk at crwoodturner.com>
>
>
>
> Good evening here is the link for tomorrow's meeting. Starts at 6 pm
>
> 6-630 board meeting
>
> 630-730? Social hour
>
>
>
> James Bloomer is inviting you to a scheduled Zoom meeting.
>
>
>
> Topic: Coulee Region Woodturners
>
> Time: May 20, 2021 06:00 PM Central Time (US and Canada)
>
>
>
> Join Zoom Meeting
>
> https://us02web.zoom.us/j/8076430043?pwd=ajdBSnlOUVpkcEJndnQ5TTMzQ1pQdz09
>
>
>
> Meeting ID: 807 643 0043
>
> Passcode: 836573
>
> One tap mobile
>
> +13126266799,,8076430043#,,,,*836573# US (Chicago)
>
> +19292056099,,8076430043#,,,,*836573# US (New York)
>
>
>
> Dial by your location
>
>         +1 312 626 6799 US (Chicago)
>
>         +1 929 205 6099 US (New York)
>
>         +1 301 715 8592 US (Washington DC)
>
>         +1 346 248 7799 US (Houston)
>
>         +1 669 900 6833 US (San Jose)
>
>         +1 253 215 8782 US (Tacoma)
>
> Meeting ID: 807 643 0043
>
> Passcode: 836573
>
> Find your local number: https://us02web.zoom.us/u/kfQHOzLdd
>
>
>
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210520/bf6840f3/attachment.html>

From mogoldfish at yahoo.com  Thu May 20 18:56:05 2021
From: mogoldfish at yahoo.com (Kristine Clough)
Date: Thu, 20 May 2021 23:56:05 +0000 (UTC)
Subject: [crw-talk] warped knife blade fix??
In-Reply-To: <0e3e01d74dba$cd429e70$67c7db50$@gmail.com>
References: <CAGK6+hD9u5Mtd35zdS1vgbEEunAdmNvKQBArbTKFe9ufnaEAmA@mail.gmail.com>
	<CAGK6+hCPwYaE4K5yi0TYJaGuphAmq60ePTLFELsRpk8GEQSGsw@mail.gmail.com>
	<0d9901d74db9$552fe650$ff8fb2f0$@gmail.com>
	<BN7PR03MB3699C75E7CC37403733C217BA42A9@BN7PR03MB3699.namprd03.prod.outlook.com>
	<0e3e01d74dba$cd429e70$67c7db50$@gmail.com>
Message-ID: <2111522506.2618340.1621554965385@mail.yahoo.com>

 Hi everyone,
I am working on restoring my parents wedding knife for use for my nephew's wedding.? After all of this time, it has developed a warp in the blade.? Any ideas on how to fix this?
It is forged stainless steel and the blade is about 13 inches long.
Kris
   
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210520/4202bcf3/attachment.html>

From EganR at westerntc.edu  Thu May 20 21:14:06 2021
From: EganR at westerntc.edu (Egan, Richard)
Date: Fri, 21 May 2021 02:14:06 +0000
Subject: [crw-talk] warped knife blade fix??
In-Reply-To: <2111522506.2618340.1621554965385@mail.yahoo.com>
References: <CAGK6+hD9u5Mtd35zdS1vgbEEunAdmNvKQBArbTKFe9ufnaEAmA@mail.gmail.com>
	<CAGK6+hCPwYaE4K5yi0TYJaGuphAmq60ePTLFELsRpk8GEQSGsw@mail.gmail.com>
	<0d9901d74db9$552fe650$ff8fb2f0$@gmail.com>
	<BN7PR03MB3699C75E7CC37403733C217BA42A9@BN7PR03MB3699.namprd03.prod.outlook.com>
	<0e3e01d74dba$cd429e70$67c7db50$@gmail.com>,
	<2111522506.2618340.1621554965385@mail.yahoo.com>
Message-ID: <BN7PR03MB369946E151559184E7B8DD39A4299@BN7PR03MB3699.namprd03.prod.outlook.com>

Was there some force applied to it while it was stored?
Applying an opposite force may straighten it. I am guessing it will need heating. I bet a metallurgist could tell you.


Sent from my Verizon, Samsung Galaxy smartphone



-------- Original message --------
From: Kristine Clough <mogoldfish at yahoo.com>
Date: 5/20/21 6:56 PM (GMT-06:00)
To: "'Membership mailing list for the AAW Chapter Coulee Region Woodturners.'" <crw-talk at crwoodturner.com>
Subject: [crw-talk] warped knife blade fix??

CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe.

Hi everyone,

I am working on restoring my parents wedding knife for use for my nephew's wedding.  After all of this time, it has developed a warp in the blade.  Any ideas on how to fix this?

It is forged stainless steel and the blade is about 13 inches long.

Kris


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210521/f89de844/attachment.html>

From adrian.novak at charter.net  Thu May 20 21:23:20 2021
From: adrian.novak at charter.net (Adrian Novak)
Date: Thu, 20 May 2021 21:23:20 -0500
Subject: [crw-talk] warped knife blade fix??
In-Reply-To: <BN7PR03MB369946E151559184E7B8DD39A4299@BN7PR03MB3699.namprd03.prod.outlook.com>
References: <CAGK6+hD9u5Mtd35zdS1vgbEEunAdmNvKQBArbTKFe9ufnaEAmA@mail.gmail.com>
	<CAGK6+hCPwYaE4K5yi0TYJaGuphAmq60ePTLFELsRpk8GEQSGsw@mail.gmail.com>
	<0d9901d74db9$552fe650$ff8fb2f0$@gmail.com>
	<BN7PR03MB3699C75E7CC37403733C217BA42A9@BN7PR03MB3699.namprd03.prod.outlook.com>
	<0e3e01d74dba$cd429e70$67c7db50$@gmail.com>
	<2111522506.2618340.1621554965385@mail.yahoo.com>
Message-ID: <4c32957e-dc32-45b1-96da-6968886491f2@Porters-Phone-hehe>

     
 

 Larry McTaggert is a metallurgist.  
 
 
 
   
 

 
 
>  
> On May 20, 2021 at 9:15 PM,  <Richard Egan (mailto:eganr at westerntc.edu)>  wrote:
>  
>  
>      
> Was there some force applied to it while it was stored?
>  
> Applying an opposite force may straighten it. I am guessing it will need heating. I bet a metallurgist could tell you.
>  
>
>  
>
>  
>  
> Sent from my Verizon, Samsung Galaxy smartphone
>  
>  
>
>  
>
>  
>
>  
> -------- Original message --------
>  
> From: Kristine Clough  <mogoldfish at yahoo.com (mailto:mogoldfish at yahoo.com)>
>  
> Date: 5/20/21 6:56 PM (GMT-06:00)
>  
> To: "'Membership mailing list for the AAW Chapter Coulee Region Woodturners.'"  <crw-talk at crwoodturner.com (mailto:crw-talk at crwoodturner.com)>
>  
> Subject: [crw-talk] warped knife blade fix??
>  
>
>  
>  
>   CAUTION:  This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe.
>  
>  
>  
>  
>
>  
> Hi everyone,
>  
>
>  
> I am working on restoring my parents wedding knife for use for my nephew's wedding.    After all of this time, it has developed a warp in the blade.    Any ideas on how to fix this?
>  
>
>  
> It is forged stainless steel and the blade is about 13 inches long.
>  
>
>  
> Kris
>  
>
>    
>  
>  
>
>                      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210520/536fb981/attachment.html>

From raaschb at charter.net  Thu May 20 21:55:09 2021
From: raaschb at charter.net (Bob R)
Date: Thu, 20 May 2021 21:55:09 -0500
Subject: [crw-talk] warped knife blade fix??
Message-ID: <mailman.0.1621565739.618419.crw-talk_crwoodturner.com@crwoodturner.com>

Larry McTaggert should able to help you.

Bob R, Sent from my Phone
On May 20, 2021 9:14 PM, "Egan, Richard" <EganR at westerntc.edu> wrote:
>
> Was there some force applied to it while it was stored?
> Applying an opposite force may straighten it. I am guessing it will need heating. I bet a metallurgist could tell you.
>
>
> Sent from my Verizon, Samsung Galaxy smartphone
>
>
>
> -------- Original message --------
> From: Kristine Clough <mogoldfish at yahoo.com>
> Date: 5/20/21 6:56 PM (GMT-06:00)
> To: "'Membership mailing list for the AAW Chapter Coulee Region Woodturners.'" <crw-talk at crwoodturner.com>
> Subject: [crw-talk] warped knife blade fix??
>
> CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe.
>
> Hi everyone,
>
> I am working on restoring my parents wedding knife for use for my nephew's wedding. After all of this time, it has developed a warp in the blade. Any ideas on how to fix this?
>
> It is forged stainless steel and the blade is about 13 inches long.
>
> Kris
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210520/3d6e170a/attachment.html>

From aaronagesicki at gmail.com  Thu May 20 22:24:57 2021
From: aaronagesicki at gmail.com (aaronagesicki at gmail.com)
Date: Thu, 20 May 2021 22:24:57 -0500
Subject: [crw-talk] warped knife blade fix??
In-Reply-To: <BN7PR03MB369946E151559184E7B8DD39A4299@BN7PR03MB3699.namprd03.prod.outlook.com>
References: <CAGK6+hD9u5Mtd35zdS1vgbEEunAdmNvKQBArbTKFe9ufnaEAmA@mail.gmail.com>	<CAGK6+hCPwYaE4K5yi0TYJaGuphAmq60ePTLFELsRpk8GEQSGsw@mail.gmail.com>	<0d9901d74db9$552fe650$ff8fb2f0$@gmail.com>	<BN7PR03MB3699C75E7CC37403733C217BA42A9@BN7PR03MB3699.namprd03.prod.outlook.com>	<0e3e01d74dba$cd429e70$67c7db50$@gmail.com>,
	<2111522506.2618340.1621554965385@mail.yahoo.com>
	<BN7PR03MB369946E151559184E7B8DD39A4299@BN7PR03MB3699.namprd03.prod.outlook.com>
Message-ID: <173301d74df0$e0b7a320$a226e960$@gmail.com>

This will be very difficult to do and keep it
looking flat and straight. Applying heat
won't help and will change the surface
appearance. 
 
 
Aaron Gesicki
 
 
 
From: crw-talk
<crw-talk-bounces at crwoodturner.com> On Behalf
Of Egan, Richard
Sent: Thursday, May 20, 2021 9:14 PM
To: Membership mailing list for the AAW
Chapter Coulee Region Woodturners.
<crw-talk at crwoodturner.com>
Subject: Re: [crw-talk] warped knife blade
fix??
 
Was there some force applied to it while it
was stored?
Applying an opposite force may straighten it.
I am guessing it will need heating. I bet a
metallurgist could tell you.
 
 
Sent from my Verizon, Samsung Galaxy
smartphone
 
 
 
-------- Original message --------
From: Kristine Clough <mogoldfish at yahoo.com
<mailto:mogoldfish at yahoo.com> > 
Date: 5/20/21 6:56 PM (GMT-06:00) 
To: "'Membership mailing list for the AAW
Chapter Coulee Region Woodturners.'"
<crw-talk at crwoodturner.com
<mailto:crw-talk at crwoodturner.com> > 
Subject: [crw-talk] warped knife blade fix?? 
 
CAUTION: This email originated from outside
of Western Technical College. Do not click
links or open attachments unless you
recognize the sender and know the content is
safe.
 
Hi everyone,
 
I am working on restoring my parents wedding
knife for use for my nephew's wedding.  After
all of this time, it has developed a warp in
the blade.  Any ideas on how to fix this?
 
It is forged stainless steel and the blade is
about 13 inches long.
 
Kris
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210520/17967302/attachment.html>

From griff at mwt.net  Fri May 21 13:54:31 2021
From: griff at mwt.net (John & Donna Griffiths)
Date: Fri, 21 May 2021 18:54:31 +0000
Subject: [crw-talk] warped knife blade fix??
In-Reply-To: <20210521025626698@air-rc-eucl-13.airstreamcomm.net>
References: <20210521025626698@air-rc-eucl-13.airstreamcomm.net>
Message-ID: <em6261f8fa-31a9-421b-8745-9768cf4384d4@johnanddonna-pc>

Speaking of metalurgists...we have one in our midst in the person of 
Aaron Gesicki.  John

------ Original Message ------
From: "Bob R" <raaschb at charter.net>
To: "Rich Eagan" <EganR at westerntc.edu>
Cc: "CRW talk" <crw-talk at crwoodturner.com>
Sent: 5/20/2021 9:55:09 PM
Subject: Re: [crw-talk] warped knife blade fix??

>Larry McTaggert should able to help you.
>
>Bob R, Sent from my Phone
>On May 20, 2021 9:14 PM, "Egan, Richard" <EganR at westerntc.edu> wrote:
>>Was there some force applied to it while it was stored?
>>Applying an opposite force may straighten it. I am guessing it will 
>>need heating. I bet a metallurgist could tell you.
>>
>>
>>Sent from my Verizon, Samsung Galaxy smartphone
>>
>>
>>
>>-------- Original message --------
>>From: Kristine Clough <mogoldfish at yahoo.com>
>>Date: 5/20/21 6:56 PM (GMT-06:00)
>>To: "'Membership mailing list for the AAW Chapter Coulee Region 
>>Woodturners.'" <crw-talk at crwoodturner.com>
>>Subject: [crw-talk] warped knife blade fix??
>>
>>CAUTION: This email originated from outside of Western Technical 
>>College. Do not click links or open attachments unless you recognize 
>>the sender and know the content is safe.
>>
>>Hi everyone,
>>
>>I am working on restoring my parents wedding knife for use for my 
>>nephew's wedding. After all of this time, it has developed a warp in 
>>the blade. Any ideas on how to fix this?
>>
>>It is forged stainless steel and the blade is about 13 inches long.
>>
>>Kris
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210521/ff54fb5b/attachment.html>

From griff at mwt.net  Fri May 21 14:45:34 2021
From: griff at mwt.net (John & Donna Griffiths)
Date: Fri, 21 May 2021 19:45:34 +0000
Subject: [crw-talk] June meeting
Message-ID: <emeec0be49-1599-4e1a-9e4c-e05c3a06c1a8@johnanddonna-pc>

Members,

The board met last night and made some decisions about the June meeting.

We have the Lion's Club Shelter just north of the Community Center 
Parking lot reserved.  So the meeting will be outdoors.  BRING YOUR OWN 
CHAIR.  We will be following CDC Guidelines in place at the time of the 
meeting.

We have a hands on demo scheduled.  Duane Hill will assist all 
interested in using the club owned Sorby Texturing Tool and other 
texturing tools the club may own.  He will also bring some of his tools, 
many along the lines of those discussed by Mike Peace in his remote for 
us demo last Saturday.  Bring your own texturing tools too.   We will 
have blanks mounted in chucks for practice, then we will turn off the 
texturing applied and the next tool and or person sill be used.  We will 
be using a club owned Jet Midi lathe which we will wheel out to the 
shelter.

Remember, the club owned tools are intended for lending so any member 
may borrow them.  "Any member" is anyone who was a paid member in 2020 
or has since joined.  Remember, the club the owns the tools for the 
purpose of lending.

The library will be open and the cart will be wheeled to just outside 
the Community Center.  If you have any library materials checked out 
from the last meeting, you may return them at the meeting.  Any member 
may also check out materials.

James will use his phone to live stream the meeting.  That is, he will 
"film" it, so to speak, and send it out for viewing as it happens, so 
members who choose not to attend in person may attend virtually through 
your internet connection and speak or ask questions.   The board has 
plans to do this on an ongoing basis and will begin bringing more pros 
remotely to the Community Center in this manner in the future.

We will begin our June meeting at 8:00 AM.  We will need our Coffee Crew 
to come out of retirement and set up coffee at the shelter.  James will 
be there with the building key at 8:00.  We will need volunteers to 
assist in set up.  The meeting will be called to order at 9:00 AM.  
James will be busy so it appears he may need a volunteer videographer to 
handle the live streaming.

We will indeed have an Instant Gallery.  Most of us have been flexing 
our creative muscles during the pandemic so be sure to bring your work 
and discuss it when the time comes.

  I mentioned we are planning more remote professional demos at the 
Community Center.  Who might we consider in the forseeable future?  Give 
me names.  I already plan to look into Alan Lacer and Ashley Harwood.  
Although our club demo schedule has been set up (with several club 
members) we will alter it a bit if a pro opportunity comes up.

If you plan to attend in person and have wood or something to sell, we 
will do that just like we used to back in the day.  (I plan to bring a 
couple of items for sale and 25% of the take goes to the club.)

John





-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210521/4d0e54a5/attachment.html>

From jfuchsel at acegroup.cc  Sun May 23 08:22:35 2021
From: jfuchsel at acegroup.cc (John Fuchsel)
Date: Sun, 23 May 2021 08:22:35 -0500
Subject: [crw-talk] warped knife blade fix??
In-Reply-To: <ojulnq92j5vd4tlr7pvi1kle.1621775792799@email.android.com>
Message-ID: d8bc67aaac55fa206717ed4669fdad29

I would try applying pressure using a vice and three dowels. One dowel on the convex side of the bend. The possibility of snapping the blade does exist however. Do not apply heat. Enough heat to do the deed will ruin the temper and stainless is not easily re-tempered by an amatuer.Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------From: aaronagesicki at gmail.com Date: 5/20/21  10:26 PM  (GMT-06:00) To: "'Membership mailing list for the AAW Chapter Coulee Region	Woodturners.'" <crw-talk at crwoodturner.com> Subject: Re: [crw-talk] warped knife blade fix?? This will be very difficult to do and keep it looking flat and straight. Applying heat won?t help and will change the surface appearance. ??Aaron Gesicki???From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Egan, RichardSent: Thursday, May 20, 2021 9:14 PMTo: Membership mailing list for the AAW Chapter Coulee Region Woodturners. <crw-talk at crwoodturner.com>Subject: Re: [crw-talk] warped knife blade fix???Was there some force applied to it while it was stored?Applying an opposite force may straighten it. I am guessing it will need heating. I bet a metallurgist could tell you.??Sent from my Verizon, Samsung Galaxy smartphone???-------- Original message --------From: Kristine Clough <mogoldfish at yahoo.com> Date: 5/20/21 6:56 PM (GMT-06:00) To: "'Membership mailing list for the AAW Chapter Coulee Region Woodturners.'" <crw-talk at crwoodturner.com> Subject: [crw-talk] warped knife blade fix?? ?CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe.?Hi everyone,?I am working on restoring my parents wedding knife for use for my nephew's wedding.? After all of this time, it has developed a warp in the blade.? Any ideas on how to fix this??It is forged stainless steel and the blade is about 13 inches long.?Kris??
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210523/797c49e8/attachment.html>

From aaronagesicki at gmail.com  Sun May 23 09:25:09 2021
From: aaronagesicki at gmail.com (aaronagesicki at gmail.com)
Date: Sun, 23 May 2021 09:25:09 -0500
Subject: [crw-talk] warped knife blade fix??
In-Reply-To: <60aa5799.1c69fb81.3caa9.b76aSMTPIN_ADDED_BROKEN@mx.google.com>
References: <ojulnq92j5vd4tlr7pvi1kle.1621775792799@email.android.com>
	<60aa5799.1c69fb81.3caa9.b76aSMTPIN_ADDED_BROKEN@mx.google.com>
Message-ID: <5d3801d74fdf$6fdced90$4f96c8b0$@gmail.com>

The dowels idea ? good one. This could work. Will take some finagling  [tech term]. 
 
Don?t worry about breaking. All stainless alloys are very malleable ? almost impossible to break no matter the amount of bending. 
 
 
Aaron Gesicki
 
 
 
From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of John Fuchsel
Sent: Sunday, May 23, 2021 8:23 AM
To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. <crw-talk at crwoodturner.com>
Subject: Re: [crw-talk] warped knife blade fix??
 
I would try applying pressure using a vice and three dowels. One dowel on the convex side of the bend. The possibility of snapping the blade does exist however. Do not apply heat. Enough heat to do the deed will ruin the temper and stainless is not easily re-tempered by an amateur.
 
 
 
Sent from my Verizon, Samsung Galaxy smartphone
 
 
-------- Original message --------
From: aaronagesicki at gmail.com <mailto:aaronagesicki at gmail.com>  
Date: 5/20/21 10:26 PM (GMT-06:00) 
To: "'Membership mailing list for the AAW Chapter Coulee Region Woodturners.'" <crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> > 
Subject: Re: [crw-talk] warped knife blade fix?? 
 
This will be very difficult to do and keep it looking flat and straight. Applying heat won?t help and will change the surface appearance. 
 
 
Aaron Gesicki
 
 
 
From: crw-talk <crw-talk-bounces at crwoodturner.com <mailto:crw-talk-bounces at crwoodturner.com> > On Behalf Of Egan, Richard
Sent: Thursday, May 20, 2021 9:14 PM
To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. <crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> >
Subject: Re: [crw-talk] warped knife blade fix??
 
Was there some force applied to it while it was stored?
Applying an opposite force may straighten it. I am guessing it will need heating. I bet a metallurgist could tell you.
 
 
Sent from my Verizon, Samsung Galaxy smartphone
 
 
 
-------- Original message --------
From: Kristine Clough <mogoldfish at yahoo.com <mailto:mogoldfish at yahoo.com> > 
Date: 5/20/21 6:56 PM (GMT-06:00) 
To: "'Membership mailing list for the AAW Chapter Coulee Region Woodturners.'" <crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> > 
Subject: [crw-talk] warped knife blade fix?? 
 
CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe.
 
Hi everyone,
 
I am working on restoring my parents wedding knife for use for my nephew's wedding.  After all of this time, it has developed a warp in the blade.  Any ideas on how to fix this?
 
It is forged stainless steel and the blade is about 13 inches long.
 
Kris
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210523/d060c544/attachment.html>

From marine9096 at gmail.com  Mon May 24 07:58:12 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Mon, 24 May 2021 07:58:12 -0500
Subject: [crw-talk] Fwd: Wood to give away
In-Reply-To: <91755C5D-84B0-4A6B-8AE7-2F25930EE243@hxcore.ol>
References: <91755C5D-84B0-4A6B-8AE7-2F25930EE243@hxcore.ol>
Message-ID: <CAGK6+hDfq6BdKPfKwd-BbE=PE-UDKga0c84c=6pwkJZinCzP2Q@mail.gmail.com>

Good morning members, I received this email regarding free wood.

---------- Forwarded message ---------
From: Bill Thrune <bthrune at gmail.com>
Date: Sun, May 23, 2021, 21:50
Subject: Wood to give away
To: marine9096 at gmail.com <marine9096 at gmail.com>


Jim I got your name & email address from the Coulee Region Wood Turners
home page.



I have about 25 pieces of wood to give away to the wood turners.  Trees
were cut over the winter, mostly walnut but a few other species, some
straight, others crotch pieces.  Most are 9? diameter or larger and 16? to
4? long.  I can cut them to manageable sizes as needed.



Location is about 2 miles from Dakota, Minn.  Anyone interested can send me
an email and I will send directions.

Thanks

Bill Thrune

 Bthrune at gmail.com



Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for Windows
10
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210524/bf84bcf9/attachment.html>

From rjpatros05 at gmail.com  Mon May 24 09:24:07 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Mon, 24 May 2021 09:24:07 -0500
Subject: [crw-talk] Fwd: Wood to give away
In-Reply-To: <CAGK6+hDfq6BdKPfKwd-BbE=PE-UDKga0c84c=6pwkJZinCzP2Q@mail.gmail.com>
References: <CAGK6+hDfq6BdKPfKwd-BbE=PE-UDKga0c84c=6pwkJZinCzP2Q@mail.gmail.com>
Message-ID: <31DD280B-9CEB-4441-80B7-83E772DCA708@gmail.com>

Very generous of him. 

Sent from my iPhone

> On May 24, 2021, at 9:20 AM, James Bloomer <marine9096 at gmail.com> wrote:
> 
> ?
> Good morning members, I received this email regarding free wood. 
> 
> ---------- Forwarded message ---------
> From: Bill Thrune <bthrune at gmail.com>
> Date: Sun, May 23, 2021, 21:50
> Subject: Wood to give away
> To: marine9096 at gmail.com <marine9096 at gmail.com>
> 
> 
> Jim I got your name & email address from the Coulee Region Wood Turners home page.
> 
>  
> 
> I have about 25 pieces of wood to give away to the wood turners.  Trees were cut over the winter, mostly walnut but a few other species, some straight, others crotch pieces.  Most are 9? diameter or larger and 16? to 4? long.  I can cut them to manageable sizes as needed.
> 
>  
> 
> Location is about 2 miles from Dakota, Minn.  Anyone interested can send me an email and I will send directions.
> 
> Thanks
> 
> Bill Thrune      
> 
>  Bthrune at gmail.com
> 
>  
> 
> Sent from Mail for Windows 10
> 
>  
> 
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210524/7ddd4b49/attachment.html>

From jlwkm at mwt.net  Thu May 27 19:38:17 2021
From: jlwkm at mwt.net (jlwkm at mwt.net)
Date: Thu, 27 May 2021 19:38:17 -0500
Subject: [crw-talk] Free wood
Message-ID: <AFEACF17B9CB41F5A2AA3F1F9270A8EC@JohnFrawleyPC>

Harvested some honey locust for lumber, many turnable chunks left over. Bad news I am an hour south of LaCrosse and don?t deliver or treat the ends. Good news is it is free, you don?t need to bring a chainsaw or wear a mask. I can remove the thorns. If you are interested contact me through e-mail or home (land line) phone number, I do not have a cell phone so texting is not possible. 

John Frawley 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210527/96032a4d/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_7446[2].jpg
Type: image/jpeg
Size: 149420 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210527/96032a4d/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_7447[2].jpg
Type: image/jpeg
Size: 155245 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210527/96032a4d/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_7448[2].jpg
Type: image/jpeg
Size: 162160 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210527/96032a4d/attachment-0002.jpg>

From griff at mwt.net  Fri May 28 16:09:46 2021
From: griff at mwt.net (John & Donna Griffiths)
Date: Fri, 28 May 2021 21:09:46 +0000
Subject: [crw-talk] Free wood
In-Reply-To: <AFEACF17B9CB41F5A2AA3F1F9270A8EC@johnfrawleypc>
References: <AFEACF17B9CB41F5A2AA3F1F9270A8EC@johnfrawleypc>
Message-ID: <eme10a2c91-aebc-4980-b37a-29385510f10f@johnanddonna-pc>

Thanks John, bad news is I live an hour north of La Crosse but the good 
news is that honey locust turns out to be pretty wood.  The lucky folks 
that get this will end up with some nice turnings with a nice reddish 
brown cast to them.  Easily mistaken for cherry at first glance, but a 
second look will confirm it is not cherry.  John

------ Original Message ------
From: jlwkm at mwt.net
To: crw-talk at crwoodturner.com
Sent: 5/27/2021 7:38:17 PM
Subject: [crw-talk] Free wood

>Harvested some honey locust for lumber, many turnable chunks left over. 
>Bad news I am an hour south of LaCrosse and don?t deliver or treat the 
>ends. Good news is it is free, you don?t need to bring a chainsaw or 
>wear a mask. I can remove the thorns. If you are interested contact me 
>through e-mail or home (land line) phone number, I do not have a cell 
>phone so texting is not possible.
>
>John Frawley
>
>IMG_7446
>IMG_7447
>IMG_7448
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210528/465a31d6/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_7446[2].jpg
Type: image/jpeg
Size: 149420 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210528/465a31d6/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_7447[2].jpg
Type: image/jpeg
Size: 155245 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210528/465a31d6/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_7448[2].jpg
Type: image/jpeg
Size: 162160 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210528/465a31d6/attachment-0002.jpg>

From norlinhein at yahoo.com  Sat May 29 12:35:15 2021
From: norlinhein at yahoo.com (Norlin Hein)
Date: Sat, 29 May 2021 12:35:15 -0500
Subject: [crw-talk] Norlin Hein
References: <D2CC7485-C9D1-4A26-BB6E-33AC0014851A.ref@yahoo.com>
Message-ID: <D2CC7485-C9D1-4A26-BB6E-33AC0014851A@yahoo.com>


I?m sorry Tim inform all you woodworkers that Norlin passed away on Wednesday from a farm accident.  Funeral will be Wednesday June 2 at St. Mary?s Catholics church in Caledonian MN.  Visitation is at 10 followed by a funeral mass at 11.  He will be laid to rest at St. John?s at the Wheatland cemetery,  A dinner will follow at 1 at the Eitzen Community Center.
Sent from my iPad


From griff at mwt.net  Sun May 30 13:44:52 2021
From: griff at mwt.net (John & Donna Griffiths)
Date: Sun, 30 May 2021 18:44:52 +0000
Subject: [crw-talk] CRW Coffee Crew
Message-ID: <em20f68f39-1e32-4f2c-aef8-50aa9a3bbfcd@johnanddonna-pc>

GENTLEMEN, START YOUR POTS  (how about my Indy 500 play on words).

Members of the CRW coffee crew, time to get ready to resume your very 
important tasks for the June meeting.  We will start set up at 8 AM and 
plan to meet outdoors at the shelter just north of the Community center 
parking lot. so will need one or two pots perking away.  It just 
occurred to me, I hope the coffee we have sitting in the crib is not too 
awfully stale, it has been untouched for 16 months.

I am letting the rest of the board know about these plans too.  And of 
course, we meet the third Saturday of June, usual time.

John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210530/c9caa24b/attachment.html>

From julia.bloomer at gmail.com  Sun May 30 14:46:41 2021
From: julia.bloomer at gmail.com (Julie Bloomer)
Date: Sun, 30 May 2021 14:46:41 -0500
Subject: [crw-talk] Memorial Day project
Message-ID: <CAJKRZfhjoWTHO3H=7fM-mQkE=nU+CAiGXTEhfxUkMyXv6PhEqQ@mail.gmail.com>

Here is what I worked in this weekend.

Thanks,

Julie Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210530/dd6c5457/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: VID_221100925_174258_220.mp4
Type: video/mp4
Size: 2566511 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210530/dd6c5457/attachment.mp4>

From rjpatros05 at gmail.com  Sun May 30 17:16:45 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Sun, 30 May 2021 17:16:45 -0500
Subject: [crw-talk] Memorial Day project
In-Reply-To: <CAJKRZfhjoWTHO3H=7fM-mQkE=nU+CAiGXTEhfxUkMyXv6PhEqQ@mail.gmail.com>
References: <CAJKRZfhjoWTHO3H=7fM-mQkE=nU+CAiGXTEhfxUkMyXv6PhEqQ@mail.gmail.com>
Message-ID: <6444CF33-D9A1-4604-AABD-7ABD88AE835F@gmail.com>

That looks really interesting. Give us some more description. I know when finish hits it the colors will really pop! 

Sent from my iPhone

> On May 30, 2021, at 2:48 PM, Julie Bloomer <julia.bloomer at gmail.com> wrote:
> 
> ?
> Here is what I worked in this weekend.
> 
> Thanks,
> 
> Julie Bloomer
> <VID_221100925_174258_220.mp4>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/


From julia.bloomer at gmail.com  Sun May 30 20:05:25 2021
From: julia.bloomer at gmail.com (Julie Bloomer)
Date: Sun, 30 May 2021 20:05:25 -0500
Subject: [crw-talk] Memorial Day project
In-Reply-To: <6444CF33-D9A1-4604-AABD-7ABD88AE835F@gmail.com>
References: <CAJKRZfhjoWTHO3H=7fM-mQkE=nU+CAiGXTEhfxUkMyXv6PhEqQ@mail.gmail.com>
	<6444CF33-D9A1-4604-AABD-7ABD88AE835F@gmail.com>
Message-ID: <CAJKRZfjMZqKHscNL9+Wn+y=3WS2ALmp0hCz_zk+i1bsXzP9N=Q@mail.gmail.com>

My bad, I am sorry I didn't attach the correct file. So it is a piece of
Ash with Allumillite urathene resin. The colors are red white and blue. I
tried my hand at woodburning. I finished it with some Walnut oil. Here is
an additional video.

Julie Bloomer

On Sun, May 30, 2021, 17:18 Robert Patros <rjpatros05 at gmail.com> wrote:

> That looks really interesting. Give us some more description. I know when
> finish hits it the colors will really pop!
>
> Sent from my iPhone
>
> > On May 30, 2021, at 2:48 PM, Julie Bloomer <julia.bloomer at gmail.com>
> wrote:
> >
> > ?
> > Here is what I worked in this weekend.
> >
> > Thanks,
> >
> > Julie Bloomer
> > <VID_221100925_174258_220.mp4>
> > _________________________________________
> > Use "Reply to All" or "Reply List" to reach the whole group, "Reply"
> goes only to sender.
> > ______
> > crw-talk mailing list
> > crw-talk at crwoodturner.com
> > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> > Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210530/ab6b1753/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: VID_221100925_003357_231.mp4
Type: video/mp4
Size: 5542455 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210530/ab6b1753/attachment.mp4>

From jynxed12 at yahoo.com  Sun May 30 21:04:33 2021
From: jynxed12 at yahoo.com (Molly Parkman)
Date: Sun, 30 May 2021 21:04:33 -0500
Subject: [crw-talk] Memorial Day project
In-Reply-To: <CAJKRZfjMZqKHscNL9+Wn+y=3WS2ALmp0hCz_zk+i1bsXzP9N=Q@mail.gmail.com>
References: <CAJKRZfhjoWTHO3H=7fM-mQkE=nU+CAiGXTEhfxUkMyXv6PhEqQ@mail.gmail.com>
	<6444CF33-D9A1-4604-AABD-7ABD88AE835F@gmail.com>
	<CAJKRZfjMZqKHscNL9+Wn+y=3WS2ALmp0hCz_zk+i1bsXzP9N=Q@mail.gmail.com>
Message-ID: <A5F993A3-DC72-4F3B-AD01-52EFB3A2FBEF@yahoo.com>

An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210530/81c5253b/attachment.html>

From rjpatros05 at gmail.com  Mon May 31 12:51:50 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Mon, 31 May 2021 12:51:50 -0500
Subject: [crw-talk] Memorial Day project
In-Reply-To: <CAJKRZfjMZqKHscNL9+Wn+y=3WS2ALmp0hCz_zk+i1bsXzP9N=Q@mail.gmail.com>
References: <CAJKRZfjMZqKHscNL9+Wn+y=3WS2ALmp0hCz_zk+i1bsXzP9N=Q@mail.gmail.com>
Message-ID: <A2B9C8E8-5E59-4D52-BA6A-9438F7AD68AD@gmail.com>

Nicely done! I?ve never worked with resin like that. Beautiful colors! Thanks for sharing. 

Sent from my iPhone

> On May 30, 2021, at 8:08 PM, Julie Bloomer <julia.bloomer at gmail.com> wrote:
> 
> ?
> My bad, I am sorry I didn't attach the correct file. So it is a piece of Ash with Allumillite urathene resin. The colors are red white and blue. I tried my hand at woodburning. I finished it with some Walnut oil. Here is an additional video.
> 
> Julie Bloomer
> 
>> On Sun, May 30, 2021, 17:18 Robert Patros <rjpatros05 at gmail.com> wrote:
>> That looks really interesting. Give us some more description. I know when finish hits it the colors will really pop! 
>> 
>> Sent from my iPhone
>> 
>> > On May 30, 2021, at 2:48 PM, Julie Bloomer <julia.bloomer at gmail.com> wrote:
>> > 
>> > ?
>> > Here is what I worked in this weekend.
>> > 
>> > Thanks,
>> > 
>> > Julie Bloomer
>> > <VID_221100925_174258_220.mp4>
>> > _________________________________________
>> > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>> > ______
>> > crw-talk mailing list
>> > crw-talk at crwoodturner.com
>> > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>> 
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
> 
> <VID_221100925_003357_231.mp4>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210531/68ae4fd0/attachment.html>