[crw-talk] Tools for sale

[Mwt]

-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_4495.jpg
Type: image/jpeg
Size: 888157 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210117/5da8189e/attachment.jpg>
-------------- next part --------------



-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_4496.jpg
Type: image/jpeg
Size: 1315132 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210117/5da8189e/attachment-0001.jpg>
-------------- next part --------------



-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_4497.jpg
Type: image/jpeg
Size: 1133233 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210117/5da8189e/attachment-0002.jpg>
-------------- next part --------------



-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_4498.jpg
Type: image/jpeg
Size: 944348 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210117/5da8189e/attachment-0003.jpg>
-------------- next part --------------

I have three tools for sale.
First is an Oneida Dust Deputy.  It does an excellent job of collecting dust without clogging the filter on a shop vacuum. $25.
Second is a Craftsman 7? wobble dado, carbide.  Quite easy to fine tune and makes quite nice cuts.  $25.
Third is a Freud stack dado, 6? carbide set with all the cutters and thin washers of varying thickness for ultra fine tuning of your cut with a perfectly flat bottom. Bit more putzy then the wobble set but if you are exacting about your dados. This is your tool.  $25.
I will donate 25% of the sales of these to CRW.
John
Sent from my iPhone