From marine9096 at gmail.com  Mon Feb  1 09:48:48 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Mon, 1 Feb 2021 09:48:48 -0600
Subject: [crw-talk] Board meeting
Message-ID: <CAGK6+hDUM-UBwav3y0p1Oca69Y3gwN6E3t4zzehE=qwFjUHk4A@mail.gmail.com>

Was planning to have a board meeting this Thursday evening. 6 pm zoom
meeting. Will send link Wednesday

In Service
Jim Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210201/3ce6e2c3/attachment.html>

From raaschb at charter.net  Tue Feb  2 23:02:14 2021
From: raaschb at charter.net (Bob R)
Date: Tue, 02 Feb 2021 23:02:14 -0600
Subject: [crw-talk] Fwd: Winged bowl
Message-ID: <mailman.0.1612328549.982247.crw-talk_crwoodturner.com@crwoodturner.com>

---------- Forwarded message ----------
From: Bob R <raaschb at charter.net>
Date: Feb 2, 2021 10:57 PM
Subject: Winged bowl
To: Bob Raasch <raaschb at charter.net>
Cc: 

> Progression photos. Butternut, approx 9x4.25x1.5", salad bowl finish. Wings about .25"thick
> Yep, room for design improvement for sure,? but ya know the old-saw "one more cut", nah, not gonna go there. Fun cold weather inside shop time.
>
> https://photos.app.goo.gl/ni3V8J2KQSUTWkeb6
>
> Bob R, Sent from my Phone
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210202/a0f1cfb4/attachment.html>

From aaronagesicki at gmail.com  Wed Feb  3 07:15:50 2021
From: aaronagesicki at gmail.com (Aaron Gesicki)
Date: Wed, 3 Feb 2021 07:15:50 -0600
Subject: [crw-talk] Fwd: Winged bowl
In-Reply-To: <601a2e6e.1c69fb81.61aa6.f3abSMTPIN_ADDED_MISSING@mx.google.com>
References: <601a2e6e.1c69fb81.61aa6.f3abSMTPIN_ADDED_MISSING@mx.google.com>
Message-ID: <CAM9Ed3zo65+oCweg=BvRq6T0npwn5Cb3wttWB+YkbNr5wFxD5w@mail.gmail.com>

Nice.
You can now say "I made this".

Aaron Gesicki

On Tue, Feb 2, 2021, 11:02 PM Bob R <raaschb at charter.net> wrote:

> ---------- Forwarded message ----------
> From: Bob R <raaschb at charter.net>
> Date: Feb 2, 2021 10:57 PM
> Subject: Winged bowl
> To: Bob Raasch <raaschb at charter.net>
> Cc:
>
> Progression photos. Butternut, approx 9x4.25x1.5", salad bowl finish.
> Wings about .25"thick
> Yep, room for design improvement for sure,  but ya know the old-saw "one
> more cut", nah, not gonna go there. Fun cold weather inside shop time.
>
> https://photos.app.goo.gl/ni3V8J2KQSUTWkeb6
>
> *Bob R, Sent from my Phone*
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210203/965ab805/attachment.html>

From rjpatros05 at gmail.com  Wed Feb  3 07:19:49 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Wed, 3 Feb 2021 07:19:49 -0600
Subject: [crw-talk] Fwd: Winged bowl
In-Reply-To: <601a2e8f.1c69fb81.8b226.e926SMTPIN_ADDED_MISSING@mx.google.com>
References: <601a2e8f.1c69fb81.8b226.e926SMTPIN_ADDED_MISSING@mx.google.com>
Message-ID: <B4B3C734-889C-4A3E-A840-C760C0CFFA28@gmail.com>

Great work, Bob! I have the twin to your piece at my house. CRW hosted Bill Grumbine years ago and he turned one. It was raffled off and I have it. They are challenging and fun to do. Thanks for posting!! 

Sent from my iPhone

> On Feb 2, 2021, at 11:03 PM, Bob R <raaschb at charter.net> wrote:
> 
> ?
> ---------- Forwarded message ----------
> From: Bob R <raaschb at charter.net>
> Date: Feb 2, 2021 10:57 PM
> Subject: Winged bowl
> To: Bob Raasch <raaschb at charter.net>
> Cc: 
> 
> Progression photos. Butternut, approx 9x4.25x1.5", salad bowl finish. Wings about .25"thick
> Yep, room for design improvement for sure,  but ya know the old-saw "one more cut", nah, not gonna go there. Fun cold weather inside shop time.
> 
> https://photos.app.goo.gl/ni3V8J2KQSUTWkeb6
> 
> Bob R, Sent from my Phone
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210203/5c1cbbf7/attachment.html>

From griff at mwt.net  Wed Feb  3 11:22:17 2021
From: griff at mwt.net (John & Donna Griffiths)
Date: Wed, 03 Feb 2021 17:22:17 +0000
Subject: [crw-talk] Fwd: Winged bowl
In-Reply-To: <20210203050240318@air-rc-cdpg-43.airstreamcomm.net>
References: <20210203050240318@air-rc-cdpg-43.airstreamcomm.net>
Message-ID: <emb404ae3f-97f5-442c-bafb-f6a9c34d9805@johnanddonna-pc>

Bob,
Wonderful piece.  Turned out nicely.  Be sure to display this in the 
Instant Gallery next meeting.
John

------ Original Message ------
From: "Bob R" <raaschb at charter.net>
To: "CRW talk" <crw-talk at crwoodturner.com>
Sent: 2/2/2021 11:02:14 PM
Subject: [crw-talk] Fwd: Winged bowl

>---------- Forwarded message ----------
>From: Bob R <raaschb at charter.net>
>Date: Feb 2, 2021 10:57 PM
>Subject: Winged bowl
>To: Bob Raasch <raaschb at charter.net>
>Cc:
>
>>Progression photos. Butternut, approx 9x4.25x1.5", salad bowl finish. 
>>Wings about .25"thick
>>Yep, room for design improvement for sure,  but ya know the old-saw 
>>"one more cut", nah, not gonna go there. Fun cold weather inside shop 
>>time.
>>
>>https://photos.app.goo.gl/ni3V8J2KQSUTWkeb6
>>
>>Bob R, Sent from my Phone
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210203/15411a49/attachment.html>

From jphillips006 at centurytel.net  Wed Feb  3 13:35:31 2021
From: jphillips006 at centurytel.net (John Phillips)
Date: Wed, 3 Feb 2021 13:35:31 -0600
Subject: [crw-talk] Fwd: Winged bowl
In-Reply-To: <ED.FE.18782.96E2A106@mx07.onyx.dfw.sync.lan>
References: <ED.FE.18782.96E2A106@mx07.onyx.dfw.sync.lan>
Message-ID: <57A34D2F4763410AA4B257D1F5F82585@PhillipsPC>

very nice Bob,

From: Bob R 
Sent: Tuesday, February 2, 2021 11:02 PM
To: CRW talk 
Subject: [crw-talk] Fwd: Winged bowl

---------- Forwarded message ----------
From: Bob R <raaschb at charter.net>
Date: Feb 2, 2021 10:57 PM
Subject: Winged bowl
To: Bob Raasch <raaschb at charter.net>
Cc: 


  Progression photos. Butternut, approx 9x4.25x1.5", salad bowl finish. Wings about .25"thick
  Yep, room for design improvement for sure,  but ya know the old-saw "one more cut", nah, not gonna go there. Fun cold weather inside shop time.

  https://photos.app.goo.gl/ni3V8J2KQSUTWkeb6

  Bob R, Sent from my Phone


--------------------------------------------------------------------------------
_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210203/cf1f879d/attachment.html>

From adrian.novak at charter.net  Wed Feb  3 18:22:17 2021
From: adrian.novak at charter.net (Adrian Novak)
Date: Wed, 3 Feb 2021 18:22:17 -0600
Subject: [crw-talk] Fwd: New Open Discussion Evening:
In-Reply-To: <MAIL2.CLUBEXPRESS.COM71f30d57acca48f0b4d56f5740be952b@mail2.clubexpress.com>
Message-ID: <30949beb-f894-49d8-a69e-acf06996c0bf@Porters-Phone-hehe>

      
  

 Interesting idea from our neighbors.   
  
  
  
    
  

  
 Begin forwarded message:
  
  
>   
> From:  RON DIAMOND(rjdiamond46 at gmail.com (mailto:rjdiamond46 at gmail.com))  <mailer at mail2.clubexpress.com (mailto:mailer at mail2.clubexpress.com)>
>   Date:  Feb 3, 2021 at 6:00 PM
>   To:  Adrian Novak  <adrian.novak at charter.net (mailto:adrian.novak at charter.net)>
>   Subject: New Open Discussion Evening:
>   
>   
>   
>   
>  View in your browser (https://BWT.clubexpress.com/content.aspx?page_id=722&club_id=411146&emtid=158911229802&mtid=435940343881&ht=0)
>   
>     
>   
>   
>   
>   
>   
>   
>   
>   
>
>   
>   
>   
>   
>   
>   
>   
>   
>   
>   
>   
>   
>   
>     
>
> Badger Woodturners is going to start a monthly informal discussion group for anyone who wants to drop by, talk about what they are doing, ask questions, or just catch up.    We are not planning to have any program or agenda, just and ?open mike?, or in this case an open zoom and see who comes.
>
>   
>
>   
>
>   
>
> We are going to schedule it on an evening away from our regular meetings.   
>
>   
>
> For this first try, we are going to schedule an open zoom   at 7:30 PM (x-apple-data-detectors://5)  on the second Wednesday of the month for the next 3 months, and then reevaluate if we should move it to a different time, change the structure or continue it.
>
>   
>
>   
>
>   
>
> Please join us   at 7:30 on Wed Feb 10 (x-apple-data-detectors://7),   Wed March 10 (x-apple-data-detectors://8)  and   Wed April 14 (x-apple-data-detectors://9)
>
>   
>   
>   
>   
>   
>
> Join Zoom Meeting
>
>   
>
> https://us02web.zoom.us/j/81555808276
>
>   
>
>   
>
>   
>
> Meeting ID: 815 5580 8276
>
>   
>   
>   
>   
>     
>
>   
>
>   
>
> Tad Pinkerton is organizing    a club CNA Glue order:   
>
>   
>
> We will send out a detailed memo about how to order with price list attached, etc which you should get within the next week
>
>   
>
>   
>
>   
>
> Upcoming Open Shops
>
>   
>
>  Sat Feb 20 (x-apple-data-detectors://11):            Randy Lambrech
>
>   
>
>  Sat March 13 (x-apple-data-detectors://13)      Loren Hatteberg
>
>   
>
> Please let Ron Diamond know if you would be willing to open your shop for a club tour
>
>     
>
>     
>
>   
>   
>   
>   
>
>   
>     
>   
>   
>   
>   
>   
>                   
>     
>  You have received this message from the mailing list of Badger Woodturners. If you would prefer not to receive these emails in the future, go to the   opt-out page (https://BWT.clubexpress.com/content.aspx?page_id=356&club_id=411146&item_id=435940343881)  and modify your privacy settings. You can also request to be removed from our database completely.                  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210203/6c42370c/attachment.html>

From raaschb at charter.net  Wed Feb  3 18:29:30 2021
From: raaschb at charter.net (Bob Raasch)
Date: Wed, 3 Feb 2021 18:29:30 -0600
Subject: [crw-talk] Fwd: New Open Discussion Evening:
In-Reply-To: <30949beb-f894-49d8-a69e-acf06996c0bf@Porters-Phone-hehe>
References: <MAIL2.CLUBEXPRESS.COM71f30d57acca48f0b4d56f5740be952b@mail2.clubexpress.com>
	<30949beb-f894-49d8-a69e-acf06996c0bf@Porters-Phone-hehe>
Message-ID: <008901d6fa8c$cde10550$69a30ff0$@charter.net>

Indeed. Wonder if for Badger members only or neighbors up ?norte??

 

From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Adrian Novak
Sent: Wednesday, February 3, 2021 6:22 PM
To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. <crw-talk at crwoodturner.com>
Subject: [crw-talk] Fwd: New Open Discussion Evening:

 

Interesting idea from our neighbors. 

 



Begin forwarded message:




From: RON DIAMOND(rjdiamond46 at gmail.com <mailto:rjdiamond46 at gmail.com> ) <mailer at mail2.clubexpress.com>
Date: Feb 3, 2021 at 6:00 PM
To: Adrian Novak <adrian.novak at charter.net <mailto:adrian.novak at charter.net> >
Subject: New Open Discussion Evening:

View in your browser <https://BWT.clubexpress.com/content.aspx?page_id=722&club_id=411146&emtid=158911229802&mtid=435940343881&ht=0> 

  _____  



  <https://s3.amazonaws.com/ClubExpressClubFiles/411146/graphics/BWT_2020_banner_1732689439.jpg> 

 



Badger Woodturners is going to start a monthly informal discussion group for anyone who wants to drop by, talk about what they are doing, ask questions, or just catch up.  We are not planning to have any program or agenda, just and ?open mike?, or in this case an open zoom and see who comes.

 

We are going to schedule it on an evening away from our regular meetings.  

For this first try, we are going to schedule an open zoom  <x-apple-data-detectors://5> at 7:30 PM on the second Wednesday of the month for the next 3 months, and then reevaluate if we should move it to a different time, change the structure or continue it.

 

Please join us  <x-apple-data-detectors://7> at 7:30 on Wed Feb 10,  <x-apple-data-detectors://8> Wed March 10 and  <x-apple-data-detectors://9> Wed April 14

 

Join Zoom Meeting

 <https://us02web.zoom.us/j/81555808276> https://us02web.zoom.us/j/81555808276

 

Meeting ID: 815 5580 8276

 

 

 

Tad Pinkerton is organizing  a club CNA Glue order:  

We will send out a detailed memo about how to order with price list attached, etc which you should get within the next week

 

Upcoming Open Shops

Sat Feb 20 <x-apple-data-detectors://11> :      Randy Lambrech

Sat March 13 <x-apple-data-detectors://13>    Loren Hatteberg

Please let Ron Diamond know if you would be willing to open your shop for a club tour

  

 

  

 


  _____  



You have received this message from the mailing list of Badger Woodturners. If you would prefer not to receive these emails in the future, go to the opt-out page <https://BWT.clubexpress.com/content.aspx?page_id=356&club_id=411146&item_id=435940343881>  and modify your privacy settings. You can also request to be removed from our database completely. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210203/497ad981/attachment.html>

From andrewpingree at gmail.com  Wed Feb  3 22:40:10 2021
From: andrewpingree at gmail.com (Andrew)
Date: Wed, 3 Feb 2021 22:40:10 -0600
Subject: [crw-talk] Fwd: New Open Discussion Evening:
In-Reply-To: <008901d6fa8c$cde10550$69a30ff0$@charter.net>
References: <MAIL2.CLUBEXPRESS.COM71f30d57acca48f0b4d56f5740be952b@mail2.clubexpress.com>
	<30949beb-f894-49d8-a69e-acf06996c0bf@Porters-Phone-hehe>
	<008901d6fa8c$cde10550$69a30ff0$@charter.net>
Message-ID: <CANRBiF6gvHHcMDpY65tXL1+1CjO_+UmHdHL5=-G=3xnS6s1e6Q@mail.gmail.com>

I like this idea and would be on board with us trying it.

On Wed, Feb 3, 2021, 6:29 PM Bob Raasch <raaschb at charter.net> wrote:

> Indeed. Wonder if for Badger members only or neighbors up ?norte??
>
>
>
> *From:* crw-talk <crw-talk-bounces at crwoodturner.com> *On Behalf Of *Adrian
> Novak
> *Sent:* Wednesday, February 3, 2021 6:22 PM
> *To:* Membership mailing list for the AAW Chapter Coulee Region
> Woodturners. <crw-talk at crwoodturner.com>
> *Subject:* [crw-talk] Fwd: New Open Discussion Evening:
>
>
>
> Interesting idea from our neighbors.
>
>
>
>
>
> Begin forwarded message:
>
>
> *From: *RON DIAMOND(rjdiamond46 at gmail.com) <mailer at mail2.clubexpress.com>
> *Date: *Feb 3, 2021 at 6:00 PM
> *To: *Adrian Novak <adrian.novak at charter.net>
> *Subject: New Open Discussion Evening:*
>
> View in your browser
> <https://BWT.clubexpress.com/content.aspx?page_id=722&club_id=411146&emtid=158911229802&mtid=435940343881&ht=0>
> ------------------------------
>
>
>
> Badger Woodturners is going to start a monthly informal discussion group
> for anyone who wants to drop by, talk about what they are doing, ask
> questions, or just catch up.  We are not planning to have any program or
> agenda, just and ?open mike?, or in this case an open zoom and see who
> comes.
>
>
>
> We are going to schedule it on an evening away from our regular meetings.
>
> For this first try, we are going to schedule an open zoom at 7:30 PM on
> the second Wednesday of the month for the next 3 months, and then
> reevaluate if we should move it to a different time, change the structure
> or continue it.
>
>
>
> Please join us at 7:30 on Wed Feb 10, Wed March 10 and Wed April 14
>
>
>
> Join Zoom Meeting
>
> https://us02web.zoom.us/j/81555808276
>
>
>
> Meeting ID: 815 5580 8276
>
>
>
>
>
>
>
> *Tad Pinkerton is organizing  a club CNA Glue order: *
>
> We will send out a detailed memo about how to order with price list
> attached, etc which you should get within the next week
>
>
>
> *Upcoming Open Shops*
>
> Sat Feb 20:      Randy Lambrech
>
> Sat March 13   Loren Hatteberg
>
> Please let Ron Diamond know if you would be willing to open your shop for
> a club tour
>
>
>
>
>
>
>
>
> ------------------------------
>
>
> You have received this message from the mailing list of Badger
> Woodturners. If you would prefer not to receive these emails in the future,
> go to the opt-out page
> <https://BWT.clubexpress.com/content.aspx?page_id=356&club_id=411146&item_id=435940343881>
> and modify your privacy settings. You can also request to be removed from
> our database completely.
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210203/525fe786/attachment.html>

From raaschb at charter.net  Thu Feb  4 08:46:13 2021
From: raaschb at charter.net (Bob R)
Date: Thu, 04 Feb 2021 08:46:13 -0600
Subject: [crw-talk] Fwd: New Open Discussion Evening:
Message-ID: <mailman.1.1612449988.982247.crw-talk_crwoodturner.com@crwoodturner.com>

Maybe the board will place on their agenda this evening.

Bob R, Sent from my Phone
On Feb 3, 2021 10:40 PM, Andrew <andrewpingree at gmail.com> wrote:
>
> I like this idea and would be on board with us trying it.
>
> On Wed, Feb 3, 2021, 6:29 PM Bob Raasch <raaschb at charter.net> wrote:
>>
>> Indeed. Wonder if for Badger members only or neighbors up ?norte??
>>
>> ?
>>
>> From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of Adrian Novak
>> Sent: Wednesday, February 3, 2021 6:22 PM
>> To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. <crw-talk at crwoodturner.com>
>> Subject: [crw-talk] Fwd: New Open Discussion Evening:
>>
>> ?
>>
>> Interesting idea from our neighbors.?
>>
>> ?
>>
>>
>>
>> Begin forwarded message:
>>
>>
>>> From: RON DIAMOND(rjdiamond46 at gmail.com) <mailer at mail2.clubexpress.com>
>>> Date: Feb 3, 2021 at 6:00 PM
>>> To: Adrian Novak <adrian.novak at charter.net>
>>> Subject: New Open Discussion Evening:
>>>
>>> View in your browser
>>>
>>> ________________________________
>>>
>>> ?
>>>
>>> Badger Woodturners is going to start a monthly informal discussion group for anyone who wants to drop by, talk about what they are doing, ask questions, or just catch up.? We are not planning to have any program or agenda, just and ?open mike?, or in this case an open zoom and see who comes.
>>>
>>> ?
>>>
>>> We are going to schedule it on an evening away from our regular meetings.?
>>>
>>> For this first try, we are going to schedule an open zoom at 7:30 PM on the second Wednesday of the month for the next 3 months, and then reevaluate if we should move it to a different time, change the structure or continue it.
>>>
>>> ?
>>>
>>> Please join us at 7:30 on Wed Feb 10, Wed March 10 and Wed April 14
>>>
>>> ?
>>>
>>> Join Zoom Meeting
>>>
>>> https://us02web.zoom.us/j/81555808276
>>>
>>> ?
>>>
>>> Meeting ID: 815 5580 8276
>>>
>>> ?
>>>
>>> ?
>>>
>>> ?
>>>
>>> Tad Pinkerton is organizing ?a club CNA Glue order:?
>>>
>>> We will send out a detailed memo about how to order with price list attached, etc which you should get within the next week
>>>
>>> ?
>>>
>>> Upcoming Open Shops
>>>
>>> Sat Feb 20:????? Randy Lambrech
>>>
>>> Sat March 13?? Loren Hatteberg
>>>
>>> Please let Ron Diamond know if you would be willing to open your shop for a club tour
>>>
>>> ??
>>>
>>> ?
>>>
>>> ?
>>>
>>> ?
>>>
>>> ________________________________
>>>
>>>
>>> You have received this message from the mailing list of Badger Woodturners. If you would prefer not to receive these emails in the future, go to the opt-out page and modify your privacy settings. You can also request to be removed from our database completely.
>>
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210204/f850af8e/attachment.html>

From griff at mwt.net  Thu Feb  4 13:47:21 2021
From: griff at mwt.net (John & Donna Griffiths)
Date: Thu, 04 Feb 2021 19:47:21 +0000
Subject: [crw-talk] Fwd: New Open Discussion Evening:
In-Reply-To: <20210204144701216@air-rc-cpdg-42.airstreamcomm.net>
References: <20210204144701216@air-rc-cpdg-42.airstreamcomm.net>
Message-ID: <em2a7991d6-c5cf-4b82-b80e-1cd03a3a8c2d@johnanddonna-pc>

Members are welcome to Zoom in, John

------ Original Message ------
From: "Bob R" <raaschb at charter.net>
To: andrewpingree at gmail.com
Cc: "CRW talk" <crw-talk at crwoodturner.com>
Sent: 2/4/2021 8:46:13 AM
Subject: Re: [crw-talk] Fwd: New Open Discussion Evening:

>Maybe the board will place on their agenda this evening.
>
>Bob R, Sent from my Phone
>On Feb 3, 2021 10:40 PM, Andrew <andrewpingree at gmail.com> wrote:
>>I like this idea and would be on board with us trying it.
>>
>>On Wed, Feb 3, 2021, 6:29 PM Bob Raasch <raaschb at charter.net> wrote:
>>>Indeed. Wonder if for Badger members only or neighbors up ?norte??
>>>
>>>
>>>
>>>From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of 
>>>Adrian Novak
>>>Sent: Wednesday, February 3, 2021 6:22 PM
>>>To: Membership mailing list for the AAW Chapter Coulee Region 
>>>Woodturners. <crw-talk at crwoodturner.com>
>>>Subject: [crw-talk] Fwd: New Open Discussion Evening:
>>>
>>>
>>>
>>>Interesting idea from our neighbors.
>>>
>>>
>>>
>>>
>>>
>>>Begin forwarded message:
>>>
>>>
>>>
>>>>From: RON DIAMOND(rjdiamond46 at gmail.com) 
>>>><mailer at mail2.clubexpress.com>
>>>>Date: Feb 3, 2021 at 6:00 PM
>>>>To: Adrian Novak <adrian.novak at charter.net>
>>>>Subject: New Open Discussion Evening:
>>>>
>>>>View in your browser 
>>>><https://BWT.clubexpress.com/content.aspx?page_id=722&club_id=411146&emtid=158911229802&mtid=435940343881&ht=0>
>>>>
>>>>--------------------------------------------------------------------------------
>>>>
>>>>
>>>>
>>>>Badger Woodturners is going to start a monthly informal discussion 
>>>>group for anyone who wants to drop by, talk about what they are 
>>>>doing, ask questions, or just catch up.  We are not planning to have 
>>>>any program or agenda, just and ?open mike?, or in this case an open 
>>>>zoom and see who comes.
>>>>
>>>>
>>>>
>>>>We are going to schedule it on an evening away from our regular 
>>>>meetings.
>>>>
>>>>For this first try, we are going to schedule an open zoom at 7:30 PM 
>>>>on the second Wednesday of the month for the next 3 months, and then 
>>>>reevaluate if we should move it to a different time, change the 
>>>>structure or continue it.
>>>>
>>>>
>>>>
>>>>Please join us at 7:30 on Wed Feb 10, Wed March 10 and Wed April 14
>>>>
>>>>
>>>>
>>>>Join Zoom Meeting
>>>>
>>>>https://us02web.zoom.us/j/81555808276
>>>>
>>>>
>>>>
>>>>Meeting ID: 815 5580 8276
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>Tad Pinkerton is organizing  a club CNA Glue order:
>>>>
>>>>We will send out a detailed memo about how to order with price list 
>>>>attached, etc which you should get within the next week
>>>>
>>>>
>>>>
>>>>Upcoming Open Shops
>>>>
>>>>Sat Feb 20:      Randy Lambrech
>>>>
>>>>Sat March 13   Loren Hatteberg
>>>>
>>>>Please let Ron Diamond know if you would be willing to open your 
>>>>shop for a club tour
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>--------------------------------------------------------------------------------
>>>>
>>>>You have received this message from the mailing list of Badger 
>>>>Woodturners. If you would prefer not to receive these emails in the 
>>>>future, go to the opt-out page 
>>>><https://BWT.clubexpress.com/content.aspx?page_id=356&club_id=411146&item_id=435940343881> 
>>>>and modify your privacy settings. You can also request to be removed 
>>>>from our database completely.
>>>>
>>>_________________________________________
>>>Use "Reply to All" or "Reply List" to reach the whole group, "Reply" 
>>>goes only to sender.
>>>______
>>>crw-talk mailing list
>>>crw-talk at crwoodturner.com
>>>http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>>Check the archive to make sure your message was sent: 
>>>http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210204/ad07faa8/attachment.html>

From marine9096 at gmail.com  Thu Feb  4 17:08:43 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Thu, 4 Feb 2021 17:08:43 -0600
Subject: [crw-talk] Board meeting
Message-ID: <CAGK6+hBQqJq-oUYNY-ZQJGBm6CE8svxoH+Wc8aQOgY7z3s4Cng@mail.gmail.com>

Open to all who wish to attend
James Bloomer is inviting you to a scheduled Zoom meeting.

Topic: James Bloomer's Zoom Meeting
Time: Feb 4, 2021 06:00 PM Central Time (US and Canada)

Join Zoom Meeting
https://us02web.zoom.us/j/89012924979?pwd=Tkd3ZjJCY0t2K2JUeEdWV1V4ZFpXUT09

Meeting ID: 890 1292 4979
Passcode: 124948
One tap mobile
+13017158592,,89012924979#,,,,*124948# US (Washington DC)
+13126266799,,89012924979#,,,,*124948# US (Chicago)

Dial by your location
        +1 301 715 8592 US (Washington DC)
        +1 312 626 6799 US (Chicago)
        +1 929 205 6099 US (New York)
        +1 253 215 8782 US (Tacoma)
        +1 346 248 7799 US (Houston)
        +1 669 900 6833 US (San Jose)
Meeting ID: 890 1292 4979
Passcode: 124948
Find your local number: https://us02web.zoom.us/u/kcd4wyaPLy


-- 
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210204/c326cc46/attachment.html>

From wisawdust at charter.net  Fri Feb  5 08:37:18 2021
From: wisawdust at charter.net (wisawdust at charter.net)
Date: Fri, 05 Feb 2021 14:37:18 +0000
Subject: [crw-talk] 3D Printintg Jigs
Message-ID: <f7979f0b681bb0437bd2b6e7aeb29c8bd1306a1b@webmail>

Jim, attached is a spreadsheet with the 3d printing jigs from
Thingyverse that I have used. Feel free to add theses to your
presentation. Give me a call or e-mail if you have any questions.
Duane

	-----------------------------------------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210205/e4bde38e/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Thingyverse Jigs.xlsx
Type: application/vnd.openxmlformats-officedocument.spreadsheetml.sheet
Size: 10846 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210205/e4bde38e/attachment.xlsx>

From aaronagesicki at gmail.com  Fri Feb  5 09:02:48 2021
From: aaronagesicki at gmail.com (aaronagesicki at gmail.com)
Date: Fri, 5 Feb 2021 09:02:48 -0600
Subject: [crw-talk] 3D Printing Jigs
Message-ID: <01ff01d6fbcf$f82b7d10$e8827730$@gmail.com>

Were there pictures? If yes, they didn?t come through. 
 
 
Aaron Gesicki
 
 
 
From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of wisawdust at charter.net
Sent: Friday, February 5, 2021 8:37 AM
To: 'Membership mailing list for the AAW Chapter Coulee Region Woodturners.' <crw-talk at crwoodturner.com>
Subject: [crw-talk] 3D Printing Jigs
 
Jim, attached is a spreadsheet with the 3-D printing jigs from Thingyverse that I have used.  Feel free to add theses to your presentation.  Give me a call or e-mail if you have any questions.
 
Duane
-----------------------------------------



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210205/5c196e97/attachment.html>

From marine9096 at gmail.com  Fri Feb  5 09:28:32 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Fri, 5 Feb 2021 09:28:32 -0600
Subject: [crw-talk] 3D Printing Jigs
In-Reply-To: <01ff01d6fbcf$f82b7d10$e8827730$@gmail.com>
References: <01ff01d6fbcf$f82b7d10$e8827730$@gmail.com>
Message-ID: <CAGK6+hDR9aFVvwyC6X1SOU2eo15WKf9KtKf5yLBMGUxpOREgNg@mail.gmail.com>

It's an excel file. If you go to thingiverse and search Woodturning you can
see pics of the items.

On Fri, Feb 5, 2021, 09:03 <aaronagesicki at gmail.com> wrote:

> Were there pictures? If yes, they didn?t come through.
>
>
>
>
>
> Aaron Gesicki
>
>
>
>
>
>
>
> *From:* crw-talk <crw-talk-bounces at crwoodturner.com> *On Behalf Of *
> wisawdust at charter.net
> *Sent:* Friday, February 5, 2021 8:37 AM
> *To:* 'Membership mailing list for the AAW Chapter Coulee Region
> Woodturners.' <crw-talk at crwoodturner.com>
> *Subject:* [crw-talk] 3D Printing Jigs
>
>
>
> Jim, attached is a spreadsheet with the 3-D printing jigs from Thingyverse
> that I have used.  Feel free to add theses to your presentation.  Give me a
> call or e-mail if you have any questions.
>
>
>
> Duane
>
> -----------------------------------------
>
>
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210205/f54172b3/attachment.html>

From raaschb at charter.net  Fri Feb  5 12:00:19 2021
From: raaschb at charter.net (Bob R)
Date: Fri, 05 Feb 2021 12:00:19 -0600
Subject: [crw-talk] 3D Printing Jigs
Message-ID: <mailman.2.1612548035.982247.crw-talk_crwoodturner.com@crwoodturner.com>

Cool, I like the center finder. These printers & media costly?

Bob R, Sent from my Phone
On Feb 5, 2021 9:28 AM, James Bloomer <marine9096 at gmail.com> wrote:
>
> It's an excel?file. If you go to thingiverse and search Woodturning you can see pics of the items.
>
> On Fri, Feb 5, 2021, 09:03 <aaronagesicki at gmail.com> wrote:
>>
>> Were there pictures? If yes, they didn?t come through.
>>
>> ?
>>
>> ?
>>
>> Aaron Gesicki
>>
>> ?
>>
>> ?
>>
>> ?
>>
>> From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of wisawdust at charter.net
>> Sent: Friday, February 5, 2021 8:37 AM
>> To: 'Membership mailing list for the AAW Chapter Coulee Region Woodturners.' <crw-talk at crwoodturner.com>
>> Subject: [crw-talk] 3D Printing Jigs
>>
>> ?
>>
>> Jim, attached is a spreadsheet with the 3-D printing jigs from Thingyverse that I have used.? Feel free to add theses to your presentation.? Give me a call or e-mail if you have any questions.
>>
>> ?
>>
>> Duane
>>
>> -----------------------------------------
>>
>>
>>
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210205/8bd31ea1/attachment.html>

From griff at mwt.net  Tue Feb  9 10:23:45 2021
From: griff at mwt.net (John & Donna Griffiths)
Date: Tue, 09 Feb 2021 16:23:45 +0000
Subject: [crw-talk] Monthly discussion gathering
Message-ID: <em259ae0a2-a97e-45ef-a354-7d219dfe03c2@johnanddonna-pc>

Members, when the board met in  a Zoom meeting last week, we discussed 
the idea that the Badger Woodturners are trying, having an informal 
discussion Zoom gathering once a month.  That club will be doing it 
starting this Wednesday evening.  We decided to give the idea a try.  
This would not take the place of our regular meeting.

It will be a chance to chat, socialize, share woodturning stories, 
truths and even hold your latest creation up to the camera and brag 
about it just a bit.  Perhaps you have a question about sharpening.  
Maybe the correct finish to use in a given situation.  How to do 
whatever.  Maybe you have an odd piece of wood and you want some one to 
help identify it.  Just a chance to socialize with like minded people.

James Bloomer will moderate the gathering and will send out a Zoom 
invitation.  And by now most of us know the drill:  Click on the line of 
blue type, your computer or device will likely already have the main 
Zoom program living within it's operating system, give permission a 
couple of times when little boxes show up asking you to do that.  And 
wait a bit while your computer thinks about it.  Maybe you will have to 
turn your mic or camera on but basically you "got 'er done!"  Just like 
Larry the Cable Guy teaches us.

James will make the call about the date and time so stay tuned, he will 
message us.

(Don't forget, we will be having our regular club meeting on Saturday on 
Saturday February 20.  Jim will be moderating that as usual and will get 
an invitation to us.  More about that later.)

Stay safe and right now, stay warm too.  John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210209/b365d8f6/attachment.html>

From griff at mwt.net  Wed Feb 10 17:11:52 2021
From: griff at mwt.net (Mwt)
Date: Wed, 10 Feb 2021 17:11:52 -0600
Subject: [crw-talk] A Proper Lady
Message-ID: <7E051BF5-D41B-414D-BC03-4BCA53C9EEB7@mwt.net>

Members, I saw some turned figurines on line and said, ?Self, you could make that?, so, by George I did.  I tried very hard to make her tasteful, no Barbie Doll proportions and wearing a floor length natural edge gown.  The hat is part of the same limb I made the rest of it from, glued on at an angle. The wood is FOG, kind of looks like oak but the bark seems to not be oak.  Oak has a distinctive oder but I did not smell that.  Very heavy and dense wood that actually feels like oak when I put a tool to it.  Wet and some cracking did happen.
John

-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_4635.jpg
Type: image/jpeg
Size: 761107 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210210/c3747138/attachment.jpg>
-------------- next part --------------



-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_4636.jpg
Type: image/jpeg
Size: 681567 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210210/c3747138/attachment-0001.jpg>
-------------- next part --------------



-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_4637.jpg
Type: image/jpeg
Size: 703058 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210210/c3747138/attachment-0002.jpg>
-------------- next part --------------



-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_4638.jpg
Type: image/jpeg
Size: 746370 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210210/c3747138/attachment-0003.jpg>
-------------- next part --------------


Sent from my iPhone

From rjpatros05 at gmail.com  Wed Feb 10 17:22:31 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Wed, 10 Feb 2021 17:22:31 -0600
Subject: [crw-talk] A Proper Lady
In-Reply-To: <7E051BF5-D41B-414D-BC03-4BCA53C9EEB7@mwt.net>
References: <7E051BF5-D41B-414D-BC03-4BCA53C9EEB7@mwt.net>
Message-ID: <3C14A11B-05EA-450D-9FF8-AC495C405DCF@gmail.com>

Very elegant! You captured her beauty!!

Sent from my iPhone

> On Feb 10, 2021, at 5:12 PM, Mwt <griff at mwt.net> wrote:
> 
> ?Members, I saw some turned figurines on line and said, ?Self, you could make that?, so, by George I did.  I tried very hard to make her tasteful, no Barbie Doll proportions and wearing a floor length natural edge gown.  The hat is part of the same limb I made the rest of it from, glued on at an angle. The wood is FOG, kind of looks like oak but the bark seems to not be oak.  Oak has a distinctive oder but I did not smell that.  Very heavy and dense wood that actually feels like oak when I put a tool to it.  Wet and some cracking did happen.
> John
> 
> <IMG_4635.jpg>
> 
> 
> 
> <IMG_4636.jpg>
> 
> 
> 
> <IMG_4637.jpg>
> 
> 
> 
> <IMG_4638.jpg>
> 
> 
> Sent from my iPhone_________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/


From wisawdust at charter.net  Wed Feb 10 18:08:42 2021
From: wisawdust at charter.net (wisawdust)
Date: Wed, 10 Feb 2021 18:08:42 -0600
Subject: [crw-talk] A Proper Lady
In-Reply-To: <7E051BF5-D41B-414D-BC03-4BCA53C9EEB7@mwt.net>
Message-ID: <mailman.3.1613002137.982247.crw-talk_crwoodturner.com@crwoodturner.com>

Very nice JohnSent from my Galaxy
-------- Original message --------From: Mwt <griff at mwt.net> Date: 2/10/21  5:12 PM  (GMT-06:00) To: crw-talk at crwoodturner.com Subject: [crw-talk] A Proper Lady Members, I saw some turned figurines on line and said, ?Self, you could make that?, so, by George I did.? I tried very hard to make her tasteful, no Barbie Doll proportions and wearing a floor length natural edge gown.? The hat is part of the same limb I made the rest of it from, glued on at an angle. The wood is FOG, kind of looks like oak but the bark seems to not be oak.? Oak has a distinctive oder but I did not smell that.? Very heavy and dense wood that actually feels like oak when I put a tool to it.? Wet and some cracking did happen.John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210210/0df5175d/attachment.html>

From jayejohnson099 at centurytel.net  Thu Feb 11 08:49:10 2021
From: jayejohnson099 at centurytel.net (jayejohnson099 at centurytel.net)
Date: Thu, 11 Feb 2021 09:49:10 -0500 (EST)
Subject: [crw-talk] A Proper Lady
In-Reply-To: <7E051BF5-D41B-414D-BC03-4BCA53C9EEB7@mwt.net>
References: <7E051BF5-D41B-414D-BC03-4BCA53C9EEB7@mwt.net>
Message-ID: <1185313262.118162243.1613054950928.JavaMail.zimbra@centurytel.net>

Hi!  John, Real art work!  I love the way the bottom of the gown turned out with the  bark !  Good job and Thanks for sharing! Jay J.

----- Original Message -----
From: "John Griffiths" <griff at mwt.net>
To: "Membership mailing list for the AAW Chapter Coulee Region, Woodturners." <crw-talk at crwoodturner.com>
Sent: Wednesday, February 10, 2021 5:11:52 PM
Subject: [crw-talk] A Proper Lady

Members, I saw some turned figurines on line and said, ?Self, you could make that?, so, by George I did.  I tried very hard to make her tasteful, no Barbie Doll proportions and wearing a floor length natural edge gown.  The hat is part of the same limb I made the rest of it from, glued on at an angle. The wood is FOG, kind of looks like oak but the bark seems to not be oak.  Oak has a distinctive oder but I did not smell that.  Very heavy and dense wood that actually feels like oak when I put a tool to it.  Wet and some cracking did happen.
John



[image/jpeg:IMG_4635.jpg]






[image/jpeg:IMG_4636.jpg]






[image/jpeg:IMG_4637.jpg]






[image/jpeg:IMG_4638.jpg]



Sent from my iPhone
_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/


From ldsolem at aol.com  Mon Feb 15 11:41:46 2021
From: ldsolem at aol.com (ldsolem at aol.com)
Date: Mon, 15 Feb 2021 11:41:46 -0600
Subject: [crw-talk] Monthly discussion gathering
In-Reply-To: <em259ae0a2-a97e-45ef-a354-7d219dfe03c2@johnanddonna-pc>
References: <em259ae0a2-a97e-45ef-a354-7d219dfe03c2@johnanddonna-pc>
Message-ID: <059f01d703c1$d54d66b0$7fe83410$@aol.com>

John 

What time will the meeting start?

 

Lyle Solem

 

From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of John & Donna Griffiths
Sent: Tuesday, February 9, 2021 10:24 AM
To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. <crw-talk at crwoodturner.com>
Subject: [crw-talk] Monthly discussion gathering

 

Members, when the board met in  a Zoom meeting last week, we discussed the idea that the Badger Woodturners are trying, having an informal discussion Zoom gathering once a month.  That club will be doing it starting this Wednesday evening.  We decided to give the idea a try.  This would not take the place of our regular meeting.

 

It will be a chance to chat, socialize, share woodturning stories, truths and even hold your latest creation up to the camera and brag about it just a bit.  Perhaps you have a question about sharpening.  Maybe the correct finish to use in a given situation.  How to do whatever.  Maybe you have an odd piece of wood and you want some one to help identify it.  Just a chance to socialize with like minded people.

 

James Bloomer will moderate the gathering and will send out a Zoom invitation.  And by now most of us know the drill:  Click on the line of blue type, your computer or device will likely already have the main Zoom program living within it's operating system, give permission a couple of times when little boxes show up asking you to do that.  And wait a bit while your computer thinks about it.  Maybe you will have to turn your mic or camera on but basically you "got 'er done!"  Just like Larry the Cable Guy teaches us.

 

James will make the call about the date and time so stay tuned, he will message us.

 

(Don't forget, we will be having our regular club meeting on Saturday on Saturday February 20.  Jim will be moderating that as usual and will get an invitation to us.  More about that later.)

 

Stay safe and right now, stay warm too.  John

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210215/7279d5b6/attachment.html>

From marine9096 at gmail.com  Mon Feb 15 14:30:26 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Mon, 15 Feb 2021 14:30:26 -0600
Subject: [crw-talk] Saturday Meeting
Message-ID: <CAGK6+hBe-xV1DXXaniYPJqD3VOk9hEJpcOMp6Uq7fWZ1Y5r25g@mail.gmail.com>

Reminder of the meeting this Sat at 0900. Will send out a link via email by
0800 and will post to the facebook page as well.

-- 
In service
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210215/5e94ec2c/attachment.html>

From griff at mwt.net  Tue Feb 16 10:42:56 2021
From: griff at mwt.net (John & Donna Griffiths)
Date: Tue, 16 Feb 2021 16:42:56 +0000
Subject: [crw-talk] Saturday Meeting
Message-ID: <em8feb544f-f4f3-4b7a-bb4a-61a5318e5931@johnanddonna-pc>

Hello Friends,

Most likely you have seen James' note about the meeting coming up on the 
20th.  We'll be on Zoom, of course.  And as he said, he'll send out an 
invitation with a blue line of  code you click on to "git 'er done", 
(apologies to Larry the Cable Guy.  Better to steal his line the the one 
some other comedian says, "you can't fix stupid).

Agenda:  We will be chatting as usual but you supply your own donuts and 
coffee,a  business meeting, instant gallery and of course a Demo.

The Demo will be on the interplay of 3D printing and woodturning.  That 
will be interesting.  James showed the board a picture of a Longworth 
Chuck made with a 3D printer.  In a sense, 3D printing is the opposite 
of what we do with a blank of wood mounted in the lathe.  We are like 
sculptors who turn away everything that is not the final object we had 
in mind when we began.  3D printers, on the other hand, spray heated 
plastic on the surface of the printer to achieve the final object 
without all the waste around it.  For example one can program the 
printer to make a set of female and male threads to place in a box for a 
screw-on lid.  Kind of the opposite of CNC machining as well.

So tune in, have your coffee ready and enjoy.  If you have questions 
about getting connected to Zoom, reply to this with your question and 
we'll see what we can do to help you get on board.

John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210216/e0e63e43/attachment.html>

From marine9096 at gmail.com  Sat Feb 20 06:32:20 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Sat, 20 Feb 2021 06:32:20 -0600
Subject: [crw-talk] Zoom link
Message-ID: <CAGK6+hAh0WPDZ=AeWETaZ6vmDkKD5V3D-t8Bzs4X8n-im+K8mw@mail.gmail.com>

James Bloomer is inviting you to a scheduled Zoom meeting.

Topic: Coulee region woodturners
Time: Feb 20, 2021 09:00 AM Central Time (US and Canada)

Join Zoom Meeting
https://us02web.zoom.us/j/85312679138?pwd=OTJXOGl2NE8rcmV0R2RCaWNmQ2lJUT09

Meeting ID: 853 1267 9138
Passcode: 445851
One tap mobile
+13126266799,,85312679138#,,,,*445851# US (Chicago)
+19292056099,,85312679138#,,,,*445851# US (New York)

Dial by your location
        +1 312 626 6799 US (Chicago)
        +1 929 205 6099 US (New York)
        +1 301 715 8592 US (Washington DC)
        +1 346 248 7799 US (Houston)
        +1 669 900 6833 US (San Jose)
        +1 253 215 8782 US (Tacoma)
Meeting ID: 853 1267 9138
Passcode: 445851
Find your local number: https://us02web.zoom.us/u/kbKSpotyr1
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210220/6321c8bf/attachment.html>

From wisawdust at charter.net  Sat Feb 20 12:26:54 2021
From: wisawdust at charter.net (wisawdust)
Date: Sat, 20 Feb 2021 12:26:54 -0600
Subject: [crw-talk] Items Fot Sale
In-Reply-To: <20210220180347.MVAS20383.mtain001.msg.chrl.nc.charter.net@impout004.msg.chrl.nc.charter.net>
Message-ID: <mailman.0.1613845814.490944.crw-talk_crwoodturner.com@crwoodturner.com>

As mentioned this morning, I have a couple of woodturning items for sale (see attached photos).The first three show? homemade Longworth chuck.? This great for finishing the bottom of a bowl or platter.? This chuck is sized for a 16" lathe.? The third photo shows the back side.? This will mount in any 4 jaw chuck.? Cost $25.The 4th and 5th photos show a set of long nose jaws that will work on a Vicmarc 100 or Nova chuck.? These were used in class.? Cost $25.The last photo is for a 1/2" steb center.? Cost $15.Let me know if you are interested in any of these.? Give me a call at 608-397-9526 or e-mail and let me know.? ThanksSent from my Galaxy
-------- Original message --------From: wisawdust <wisawdust at charter.net> Date: 2/20/21  12:03 PM  (GMT-06:00) To: wisawdust at charter.net Subject: Long worth 1 Sent from my Galaxy
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210220/5e61877f/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20210220_115825.jpg
Type: image/jpeg
Size: 3509101 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210220/5e61877f/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20210220_115830.jpg
Type: image/jpeg
Size: 3370038 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210220/5e61877f/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20210220_115840.jpg
Type: image/jpeg
Size: 3251839 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210220/5e61877f/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20210220_115956.jpg
Type: image/jpeg
Size: 2768834 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210220/5e61877f/attachment-0003.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20210220_120000.jpg
Type: image/jpeg
Size: 2808882 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210220/5e61877f/attachment-0004.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20210220_120014.jpg
Type: image/jpeg
Size: 2873414 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210220/5e61877f/attachment-0005.jpg>

From gardens53581 at gmail.com  Sat Feb 20 13:46:42 2021
From: gardens53581 at gmail.com (Ken Nancy)
Date: Sat, 20 Feb 2021 13:46:42 -0600
Subject: [crw-talk] Zoom link
In-Reply-To: <CAGK6+hAh0WPDZ=AeWETaZ6vmDkKD5V3D-t8Bzs4X8n-im+K8mw@mail.gmail.com>
References: <CAGK6+hAh0WPDZ=AeWETaZ6vmDkKD5V3D-t8Bzs4X8n-im+K8mw@mail.gmail.com>
Message-ID: <CALyPebf+98rX_r+uHFbTDBzDLjfKWHVLx=N=NRM_nh4rZR1yug@mail.gmail.com>

HI jim; A very good meeting today. I took lots of notes on 3D printing.
Could someone from the club get back t me and let me know where to send a
check for dues. Jay Johnson has no information  on the website. Thank you ,
Ken Garden

On Sat, Feb 20, 2021 at 6:32 AM James Bloomer <marine9096 at gmail.com> wrote:

> James Bloomer is inviting you to a scheduled Zoom meeting.
>
> Topic: Coulee region woodturners
> Time: Feb 20, 2021 09:00 AM Central Time (US and Canada)
>
> Join Zoom Meeting
> https://us02web.zoom.us/j/85312679138?pwd=OTJXOGl2NE8rcmV0R2RCaWNmQ2lJUT09
>
> Meeting ID: 853 1267 9138
> Passcode: 445851
> One tap mobile
> +13126266799,,85312679138#,,,,*445851# US (Chicago)
> +19292056099,,85312679138#,,,,*445851# US (New York)
>
> Dial by your location
>         +1 312 626 6799 US (Chicago)
>         +1 929 205 6099 US (New York)
>         +1 301 715 8592 US (Washington DC)
>         +1 346 248 7799 US (Houston)
>         +1 669 900 6833 US (San Jose)
>         +1 253 215 8782 US (Tacoma)
> Meeting ID: 853 1267 9138
> Passcode: 445851
> Find your local number: https://us02web.zoom.us/u/kbKSpotyr1
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210220/72e9f4b0/attachment.html>

From griff at mwt.net  Sat Feb 20 14:07:49 2021
From: griff at mwt.net (John & Donna Griffiths)
Date: Sat, 20 Feb 2021 20:07:49 +0000
Subject: [crw-talk] Zoom link
In-Reply-To: <CALyPebf+98rX_r+uHFbTDBzDLjfKWHVLx=N=NRM_nh4rZR1yug@mail.gmail.com>
References: <CAGK6+hAh0WPDZ=AeWETaZ6vmDkKD5V3D-t8Bzs4X8n-im+K8mw@mail.gmail.com>
	<CALyPebf+98rX_r+uHFbTDBzDLjfKWHVLx=N=NRM_nh4rZR1yug@mail.gmail.com>
Message-ID: <em8552fe33-e9b0-4ce3-a0ea-60534ec8fa36@johnanddonna-pc>

Ah ha you must have been the Ken guy I saw on Zoom.  Welcome.  I copied 
Jay onto this so he will get this twice, but you can communicate with 
him about membership, John

------ Original Message ------
From: "Ken Nancy" <gardens53581 at gmail.com>
To: "Membership mailing list for the AAW Chapter Coulee Region 
Woodturners." <crw-talk at crwoodturner.com>
Sent: 2/20/2021 1:46:42 PM
Subject: Re: [crw-talk] Zoom link

>HI jim; A very good meeting today. I took lots of notes on 3D printing. 
>Could someone from the club get back t me and let me know where to send 
>a check for dues. Jay Johnson has no information  on the website. Thank 
>you , Ken Garden
>
>On Sat, Feb 20, 2021 at 6:32 AM James Bloomer <marine9096 at gmail.com> 
>wrote:
>>James Bloomer is inviting you to a scheduled Zoom meeting.
>>
>>Topic: Coulee region woodturners
>>Time: Feb 20, 2021 09:00 AM Central Time (US and Canada)
>>
>>Join Zoom Meeting
>>https://us02web.zoom.us/j/85312679138?pwd=OTJXOGl2NE8rcmV0R2RCaWNmQ2lJUT09
>>
>>Meeting ID: 853 1267 9138
>>Passcode: 445851
>>One tap mobile
>>+13126266799,,85312679138#,,,,*445851# US (Chicago)
>>+19292056099,,85312679138#,,,,*445851# US (New York)
>>
>>Dial by your location
>>         +1 312 626 6799 US (Chicago)
>>         +1 929 205 6099 US (New York)
>>         +1 301 715 8592 US (Washington DC)
>>         +1 346 248 7799 US (Houston)
>>         +1 669 900 6833 US (San Jose)
>>         +1 253 215 8782 US (Tacoma)
>>Meeting ID: 853 1267 9138
>>Passcode: 445851
>>Find your local number: https://us02web.zoom.us/u/kbKSpotyr1
>>
>>_________________________________________
>>Use "Reply to All" or "Reply List" to reach the whole group, "Reply" 
>>goes only to sender.
>>______
>>crw-talk mailing list
>>crw-talk at crwoodturner.com
>>http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>Check the archive to make sure your message was sent: 
>>http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210220/43841259/attachment.html>

From mogoldfish at yahoo.com  Sat Feb 20 19:40:21 2021
From: mogoldfish at yahoo.com (Kristine Clough)
Date: Sun, 21 Feb 2021 01:40:21 +0000 (UTC)
Subject: [crw-talk] Zoom link
In-Reply-To: <CALyPebf+98rX_r+uHFbTDBzDLjfKWHVLx=N=NRM_nh4rZR1yug@mail.gmail.com>
References: <CAGK6+hAh0WPDZ=AeWETaZ6vmDkKD5V3D-t8Bzs4X8n-im+K8mw@mail.gmail.com>
	<CALyPebf+98rX_r+uHFbTDBzDLjfKWHVLx=N=NRM_nh4rZR1yug@mail.gmail.com>
Message-ID: <1113632982.542806.1613871621118@mail.yahoo.com>

Membership dues are suspended for this year.? When we get back together for in person meetings, we you may donate money if you would like.
Kris CloughSecretary

Sent from Yahoo Mail on Android 
 
  On Sat, Feb 20, 2021 at 1:47 PM, Ken Nancy<gardens53581 at gmail.com> wrote:   _________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210221/8c9c6050/attachment.html>

From rjpatros05 at gmail.com  Sun Feb 21 07:50:31 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Sun, 21 Feb 2021 07:50:31 -0600
Subject: [crw-talk] Router for sale
Message-ID: <E06D2FCC-30A6-48B9-B24E-25A6DB8B049B@gmail.com>

Hi all,
I have a Porter Cable 7529 router (with accessories) for sale. Actually, I purchased it recently from Duane ( who used it very little) and decided to go another route. I paid $150, did not use it, and am asking that price. 
Thanks,
Bob

Sent from my iPhone

From rjpatros05 at gmail.com  Sun Feb 21 07:52:47 2021
From: rjpatros05 at gmail.com (Robert Patros)
Date: Sun, 21 Feb 2021 07:52:47 -0600
Subject: [crw-talk] Router for sale
In-Reply-To: <E06D2FCC-30A6-48B9-B24E-25A6DB8B049B@gmail.com>
References: <E06D2FCC-30A6-48B9-B24E-25A6DB8B049B@gmail.com>
Message-ID: <D160A059-4C9D-4ED7-B777-F2ED7FF3E6E0@gmail.com>

It?s a 2hp plunge router. 

Sent from my iPhone

> On Feb 21, 2021, at 7:50 AM, Robert Patros <rjpatros05 at gmail.com> wrote:
> 
> ?Hi all,
> I have a Porter Cable 7529 router (with accessories) for sale. Actually, I purchased it recently from Duane ( who used it very little) and decided to go another route. I paid $150, did not use it, and am asking that price. 
> Thanks,
> Bob
> 
> Sent from my iPhone


From griff at mwt.net  Mon Feb 22 10:29:38 2021
From: griff at mwt.net (John & Donna Griffiths)
Date: Mon, 22 Feb 2021 16:29:38 +0000
Subject: [crw-talk] Celtic Knot
Message-ID: <em0c17cd0c-139e-4b6a-ac2a-8ece7d881f33@johnanddonna-pc>

Members, during our virtual meeting last Saturday there was a discussion 
about creating a Celtic Knot.  Several chimed in with thoughtful 
comments about the process.

Most of us are aware that this can be a putzy undertaking and requires a 
lot of attention to detail during the many steps.  But our club does 
have several members who have done this and I would like for someone to 
volunteer to demonstrate it.  I would say this might be best presented 
once we return to in person mode as I think doing it virtually would be 
more difficult then your average virtual demo on say making a bowl.

If you have the skill to demonstrate this, please consider doing so and 
get in contact with me.

Thank you, John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210222/0839d9c0/attachment.html>

From adrian.novak at charter.net  Mon Feb 22 11:06:31 2021
From: adrian.novak at charter.net (Adrian Novak)
Date: Mon, 22 Feb 2021 11:06:31 -0600
Subject: [crw-talk] Celtic Knot
In-Reply-To: <em0c17cd0c-139e-4b6a-ac2a-8ece7d881f33@johnanddonna-pc>
Message-ID: <b7062f2b-9f1e-4aa0-a8ff-b2730009a226@Porters-Phone-hehe>

     
 

 You would need a decent table saw for the demo. Dan Wilson taught me and is excellent.  
 
 
 
   
 

 
 
>  
> On Feb 22, 2021 at 10:31 AM,  <John  &  Donna Griffiths (mailto:griff at mwt.net)>  wrote:
>  
>  
>  Members, during our virtual meeting last Saturday there was a discussion about creating a Celtic Knot.    Several chimed in with thoughtful comments about the process. 
>
>  
> Most of us are aware that this can be a putzy undertaking and requires a lot of attention to detail during the many steps.    But our club does have several members who have done this and I would like for someone to volunteer to demonstrate it.    I would say this might be best presented once we return to in person mode as I think doing it virtually would be more difficult then your average virtual demo on say making a bowl.
>  
>
>  
> If you have the skill to demonstrate this, please consider doing so and get in contact with me.
>  
>
>  
> Thank you, John
>  
>  
 
 
     
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210222/2597e85c/attachment.html>

From marine9096 at gmail.com  Wed Feb 24 10:01:45 2021
From: marine9096 at gmail.com (James Bloomer)
Date: Wed, 24 Feb 2021 10:01:45 -0600
Subject: [crw-talk] New and email update
Message-ID: <CAGK6+hCK3ZikHfWJaF=OVS5PWe50JZCG+PdbaH9TA+jLhcFHTA@mail.gmail.com>

Just a heads up. I was able to get a hold of a turning instructor that
works for Ft McCoy BOSS(Better Opportunity for Single Soldiers). He was not
aware of our existence and has been turning about 2-3 years. He teaches
pens and salt and pepper shakers. He plans to check out the club and
hopefully we can bring our knowledge to the turning classes (His next class
is tomorrow 4-630 PM on Ft McCoy)

Ken, a couple email updates for the distro list
Jon Fischer wants to use  jdcrow1956 at yahoo.com
Molly Parkman jynxed12 at yahoo.com she needs to be added


In Service
-- 
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210224/40dbce0a/attachment.html>

From griff at mwt.net  Thu Feb 25 10:27:51 2021
From: griff at mwt.net (John & Donna Griffiths)
Date: Thu, 25 Feb 2021 16:27:51 +0000
Subject: [crw-talk] New and email update
In-Reply-To: <CAGK6+hCK3ZikHfWJaF=OVS5PWe50JZCG+PdbaH9TA+jLhcFHTA@mail.gmail.com>
References: <CAGK6+hCK3ZikHfWJaF=OVS5PWe50JZCG+PdbaH9TA+jLhcFHTA@mail.gmail.com>
Message-ID: <em4a1b017e-da66-4cd1-9c81-e0abd4c09e96@johnanddonna-pc>

Good that you found that.  I for one will help if needed once it is 
safer, John

------ Original Message ------
From: "James Bloomer" <marine9096 at gmail.com>
To: "CRW talk" <crw-talk at crwoodturner.com>
Sent: 2/24/2021 10:01:45 AM
Subject: [crw-talk] New and email update

>
>Just a heads up. I was able to get a hold of a turning instructor that 
>works for Ft McCoy BOSS(Better Opportunity for Single Soldiers). He was 
>not aware of our existence and has been turning about 2-3 years. He 
>teaches pens and salt and pepper shakers. He plans to check out the 
>club and hopefully we can bring our knowledge to the turning classes 
>(His next class is tomorrow 4-630 PM on Ft McCoy)
>
>Ken, a couple email updates for the distro list
>Jon Fischer wants to use  jdcrow1956 at yahoo.com
>Molly Parkman jynxed12 at yahoo.com she needs to be added
>
>
>In Service
>--
>James A. Bloomer
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210225/cb461a7b/attachment.html>

From mogoldfish at yahoo.com  Thu Feb 25 13:28:50 2021
From: mogoldfish at yahoo.com (Kristine Clough)
Date: Thu, 25 Feb 2021 19:28:50 +0000 (UTC)
Subject: [crw-talk] New Horizons Shelter
In-Reply-To: <443444548.1731937.1614201510617@mail.yahoo.com>
References: <443444548.1731937.1614201510617.ref@mail.yahoo.com>
	<443444548.1731937.1614201510617@mail.yahoo.com>
Message-ID: <679921654.2045818.1614281330812@mail.yahoo.com>

 Hello members,
During the meeting last Saturday, Bob Patros asked if we knew of any groups that might like any of our "extra" turnings that we have around.? I suggested that the women's shelter might like to receive something to donate to the people are starting their new lives and receiving something nice for them as they may have left everything behind or they can use them for fundraisers.? Several members agreed and I reached out to New Horizons.? The email and their response is listed below.??
They are having a Victory of Violence fundraiser on April 8th.? I have reached out that I will collect items for this fundraiser.? I am waiting for a response on when they will be needed by.? They liked the idea of receiving spinning tops and items for the individual people utilizing their services.
I will let you know more as I find out details.
Kris Clough
   ----- Forwarded Message ----- From: Kristine Clough <mogoldfish at yahoo.com>To: dev at nhagainstabuse.org <dev at nhagainstabuse.org>Sent: Wednesday, February 24, 2021, 03:18:30 PM CSTSubject: victory over violence fundraiser or other
 To the staff at New Horizons,
I am the secretary of the Coulee Region Woodturners club here in the La Crosse region.? Our members create hand made bowls, vases, platters and boxes out of wood and other materials.? At the last meeting, one of our members commented that he has too much "inventory" built up and was wanting to donate some of it to a local organization. I suggested New Horizons and several other members agreed that this would be a good organization to support.??
I have a couple of ideas on what our club could do to offer support.? One, we could donate items that can be auctioned off at your fundraisers.? Two, I see that one of the items on your donation list is fidget toys.? Many of our members turn tops.? I'm not sure if this would qualify as a fidget toy in your mind or not.? Three, donate items to be given to people utilizing the shelter so they get something new just for them as they start a new chapter of their lives.
Please let me know if our club could be of assistance to your organization.
Sincerely,
Kris CloughSecretary of the Coulee Region Woodturnersmogoldfish at yahoo.com_______________________________
Hello Kris,

?

What an amazing offer!! The short answer is YES!! We would LOVE to have your contributions for any and all of the suggestions!

?

Particularly our upcoming fundraiser, Victory Over Violence could really benefit from your group?s talents!

?

We are wide open for everything you suggested!

Please let me know what I can do to help make this happen!

?

Thank you so much for thinking of New Horizons!!

?

Patty Nuttleman?| Development Director

608-791-2610 ext. 1305 |?dev at nhagainstabuse.org

?

New Horizons Shelter and Outreach Centers, Inc.

P.O. Box 2031 | La Crosse, WI 54602 | Phone: 608-791-2610 | Fax: 608-791-2619

P.O. Box 518 | Whitehall, WI 54773 | Phone: 715-538-2810 | Fax: 715-538-2100

Website:?www.nhagainstabuse.org

?

??????????
Over 40 years of Advocating Against Sexual and Domestic Abuse.


| 
| 
| 
|  |  |

 |

 |
| 
|  | 
Give Hope Now


 |

 |

 |





  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210225/1d1527ce/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.jpg
Type: image/jpeg
Size: 947 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210225/1d1527ce/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image006.png
Type: image/png
Size: 4778 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210225/1d1527ce/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image005.png
Type: image/png
Size: 1626 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210225/1d1527ce/attachment-0001.png>

From mogoldfish at yahoo.com  Thu Feb 25 13:58:20 2021
From: mogoldfish at yahoo.com (Kristine Clough)
Date: Thu, 25 Feb 2021 19:58:20 +0000 (UTC)
Subject: [crw-talk] Fw: victory over violence fundraiser or other
In-Reply-To: <41955fe10e1b4f75a64bd59eb10070b0@nhagainstabuse.org>
References: <443444548.1731937.1614201510617.ref@mail.yahoo.com>
	<443444548.1731937.1614201510617@mail.yahoo.com>
	<71a091b614ea492b9d47cba5d106cec2@nhagainstabuse.org>
	<1405305833.2023492.1614280404348@mail.yahoo.com>
	<41955fe10e1b4f75a64bd59eb10070b0@nhagainstabuse.org>
Message-ID: <682290160.2047335.1614283100509@mail.yahoo.com>

 Members, See New Horizon's response below.? If I can get the donations by March 14th, I will get them the donations.? If you would like a receipt, please let me know.? You can also contact them directly with donations.
Kris
   ----- Forwarded Message ----- From: Patty Nuttleman <dev at nhagainstabuse.org>To: Kristine Clough <mogoldfish at yahoo.com>Sent: Thursday, February 25, 2021, 01:37:18 PM CSTSubject: RE: victory over violence fundraiser or other
 
Hi Kris,
 
 ?
 
If we could get the items for Victory Over Violence around March 18th to allow time to get the items built into the auction and give some social media love to them to promote.
 
 ?
 
Tax receipts are definitely easy to provide. I?ll handle it myself for each person.
 
 ?
 
I?m open to anything you think might be awesome for our clients. Creativity and a fresh perspective is always welcome!J
 
 ?
 
You?ve provided a huge boost of excitement for us today! Thank you!!
 
 ?
 
Patty Nuttleman | Development Director
 
608-791-2610 ext. 1305 |dev at nhagainstabuse.org
 
 ?
 
New Horizons Shelter and Outreach Centers, Inc.
 
P.O. Box 2031 | La Crosse, WI 54602 | Phone: 608-791-2610 | Fax: 608-791-2619
 
P.O. Box 518 | Whitehall, WI 54773 | Phone: 715-538-2810 | Fax: 715-538-2100
 
Website:www.nhagainstabuse.org
 
 ?
 
?????????
Over 40 years of Advocating Against Sexual and Domestic Abuse.
 
 ?
 
From: Kristine Clough [mailto:mogoldfish at yahoo.com]
Sent: Thursday, February 25, 2021 1:13 PM
To: Patty Nuttleman <dev at nhagainstabuse.org>
Subject: Re: victory over violence fundraiser or other
 
 ?
 
Hi Patty,
 
 ?
 
I would like to organize collecting some items for the April fundraiser.? When will you need these by?? What other information would you like regarding the items that you will receive?? Some of the members may want receipts for tax purposes, do you provide them?
 
 ?
 
Is there anything else besides the spinning tops that you might like for the guests?
 
 ?
 
Thanks,
 
 ?
 
Kris
 
 ?
 
On Thursday, February 25, 2021, 12:46:25 PM CST, Patty Nuttleman <dev at nhagainstabuse.org> wrote:
 
 ?
 
 ?
 
Hello Kris,
 
?
 
What an amazing offer!! The short answer is YES!! We would LOVE to have your contributions for any and all of the suggestions!
 
?
 
Particularly our upcoming fundraiser, Victory Over Violence could really benefit from your group?s talents!
 
?
 
We are wide open for everything you suggested!
 
Please let me know what I can do to help make this happen!
 
?
 
Thank you so much for thinking of New Horizons!!
 
?
 
Patty Nuttleman | Development Director
 
608-791-2610 ext. 1305 |dev at nhagainstabuse.org
 
?
 
New Horizons Shelter and Outreach Centers, Inc.
 
P.O. Box 2031 | La Crosse, WI 54602 | Phone: 608-791-2610 | Fax: 608-791-2619
 
P.O. Box 518 | Whitehall, WI 54773 | Phone: 715-538-2810 | Fax: 715-538-2100
 
Website:www.nhagainstabuse.org
 
?
 
?????????
Over 40 years of Advocating Against Sexual and Domestic Abuse.
 
?
 
From: Kristine Clough [mailto:mogoldfish at yahoo.com]
Sent: Wednesday, February 24, 2021 3:19 PM
To: Patty Nuttleman <dev at nhagainstabuse.org>
Subject: victory over violence fundraiser or other
 
?
 
To the staff at New Horizons,
 
?
 
I am the secretary of the Coulee Region Woodturners club here in the La Crosse region.? Our members create hand made bowls, vases, platters and boxes out of wood and other materials.? At the last meeting, one of our members commented that he has too much "inventory" built up and was wanting to donate some of it to a local organization. I suggested New Horizons and several other members agreed that this would be a good organization to support.??
 
?
 
I have a couple of ideas on what our club could do to offer support.? One, we could donate items that can be auctioned off at your fundraisers.? Two, I see that one of the items on your donation list is fidget toys.? Many of our members turn tops.? I'm not sure if this would qualify as a fidget toy in your mind or not.? Three, donate items to be given to people utilizing the shelter so they get something new just for them as they start a new chapter of their lives.
 
?
 
Please let me know if our club could be of assistance to your organization.
 
?
 
Sincerely,
 
?
 
Kris Clough
 
Secretary of the Coulee Region Woodturners
 
mogoldfish at yahoo.com
   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210225/916b7f19/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.jpg
Type: image/jpeg
Size: 947 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210225/916b7f19/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image005.png
Type: image/png
Size: 1626 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210225/916b7f19/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image006.png
Type: image/png
Size: 4778 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210225/916b7f19/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image007.jpg
Type: image/jpeg
Size: 947 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210225/916b7f19/attachment-0001.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image008.png
Type: image/png
Size: 1626 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210225/916b7f19/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image009.png
Type: image/png
Size: 4778 bytes
Desc: not available
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20210225/916b7f19/attachment-0003.png>