[crw-talk] Muddler finish?

[John & Donna Griffiths]

Wipe on Poly.  6 coats.  Coat # one is actually two or three coats, 
applied and reapplied while wet so as much as possible soaks into the 
wood.  After that sand as needed and reapply till you have multiple 
coats on.  After the first coat I can get three coats a day on if I 
start early, let dry and reapply noonish and again about 5ish.  Then I 
use a Mike Peace concoction of beeswax, mineral oil and Diatomatious 
earth rubbed on with a fine abrasive pad then wiped off for a sheen that 
won't quit and will last forever.  Tell the person no soaking nor 
dishwasher, and hand wash/dry.

------ Original Message ------
From: "Robert Patros" <rjpatros05 at gmail.com>
To: crw-talk at crwoodturner.com
Sent: 12/11/2021 10:01:16 AM
Subject: [crw-talk] Muddler finish?

>A friend asked me to turn a muddler for him. Any thoughts on what finish to use?
>
>Sent from my iPhone
>_________________________________________
>Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>______
>crw-talk mailing list
>crw-talk at crwoodturner.com
>http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>