[crw-talk] Wig Stands

[John & Donna Griffiths]

Members,

If you have been keeping track of our wig stand discussion, I had 
expressed hope of getting some 8/4 x 61/2" rough sawn cherry to pass 
out.

That fell through, the source had burned it in his furnace.  Such a 
loss.  Should have laid claim to it sooner.

Will other members with access to wood step up and  donate some blanks 
for the cause?  It can be nearly everything that is turnable:  Walnut 
and cherry.  Maple and it's cousin box elder.  Ash.  Oak, poplar, other 
hardwoods, cottonwood or pine if you have some nice stuff.  Any wood 
that will sand to a nice surface and take a decent finish.

A couple of 6" or a bit bigger discs for the base and top, plus a 12-15" 
spindle in between them for each wig stand.  I envision members donating 
wood to others for the stands, and the takers donate $2.00 to the club 
for each set of pieces they take as a donation.

John
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/mailman/private/crw-talk_crwoodturner.com/attachments/20211210/1a426692/attachment.html>