[crw-talk] Photos to start conversation

Tue Oct 20 16:25:30 CDT 2020

John

I never get any pictures when you send an e-mail. All I get is dark print and within it something about member monthly check.

Lyle

From: crw-talk <crw-talk-bounces at crwoodturner.com> On Behalf Of John & Donna Griffiths
Sent: Tuesday, October 20, 2020 4:07 PM
To: crw-talk at crwoodturner.com
Subject: Re: [crw-talk] Photos to start conversation

Amen Brother, END grain only.  j

On 10/20/2020 10:20 AM, Aaron Gesicki wrote:

On hook tools -  

Some of you remember...I'm the guy that assisted all who wanted one on Tool Day, way back when. 

The rough grinding, the forging/bending, the hardening, the sharpening, and the tempering are all things that you/we can do in our shop PROVIDED you start with O1 tool steel. 

I'd be happy to revive this, since, as John can attest, nothing hollows out end grain faster, better, cleaner than a sharp hook tool.

It has a learning curve, but it's fun learning. After all, it's just a piece of wood.  

There are caveats, of course:

*	Must be sharp [Duh]
*	Must be end grain! Disaster awaits if you try to use it on anything else [like the inside of a crossgrain bowl].

Stay safe, but stay busy. 

On Tue, Oct 20, 2020 at 10:06 AM John & Donna Griffiths <griff at mwt.net <mailto:griff at mwt.net> > wrote:

Indeed, there is a bit of finesse required but not a lot. You are 
working on an open mouthed space, it tapers to large at the mouth.  They 
won't do hollow forms, you can't get the cutter in at the right angle 
for a cut.  They have to be really sharp.  You can kind of cut with a 
kind of dull gouge but not with the hook.  Most of us love a really nice 
trail of shavings flying off the tool, and the hook tool gives that.  
When it is cutting well, the shavings are long and thick so wouldn't 
blow out of a small hole with compressed air either.

I would volunteer to do a club demo when it is safe for us to meet.  
(Board members, are you listening?)

The hook tool making demo was before my time.  My efforts to build one 
failed, should have annealed the steel after hardening, so I bought one 
on line and built a shaft and handle to mount it.

On 10/19/2020 2:29 PM, Robert Patros wrote:
> I remember making a hook tool at one of our meetings. It took a bit of finesse to get a good cut.
>
> Sent from my iPhone
>
>> On Oct 19, 2020, at 1:48 PM, John & Donna Griffiths <griff at mwt.net <mailto:griff at mwt.net> > wrote:
>>
>> Members, I am sending a few photos of a yarn bowl I recently made of a cherry log.  It is about 6" diameter at the top and perhaps 6" tall.  I turned it in spindle orientation and hollowed mostly with a hook tool, then finished up with a negative rake scraper. Cut the "J" shaped hole for yarn with a Forstner bit in a hand drill and a saber saw then finished with spray-on Polycrylic brand finish.  I am going to TRY to send a seperate brief video of me using the hook tool to make a walnut yarn bowl that is currently in the process of finish application.
>>
>> Please discuss and share your comments with everyone.  Thanks, John
>>
>> <IMG_4144.jpg>
>> <IMG_4145.jpg>
>> <IMG_4146.jpg>
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> 
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> 
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/

_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> 
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/

-- 

Aaron Gesicki

Winona, MN

303.551.2450 cell

507.615.0233 home

_________________________________________
Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
______
crw-talk mailing list
crw-talk at crwoodturner.com <mailto:crw-talk at crwoodturner.com> 
http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20201020/94616746/attachment.html>