From EganR at westerntc.edu  Mon Mar  2 15:34:32 2020
From: EganR at westerntc.edu (Egan, Richard)
Date: Mon, 2 Mar 2020 21:34:32 +0000
Subject: [crw-talk] March newsletter
Message-ID: <BYAPR03MB4648D34B6AE450B879BC18AEA4E70@BYAPR03MB4648.namprd03.prod.outlook.com>

Members:

Spring is approaching. If you have an unheated shop, this is good news for you!
Please submit your items for the next newsletter, including items you may have for sale or trade, recent projects, or other news of interest to turning.

Thanks!

Rich Egan
Newsletter editor
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20200302/58c311ed/attachment.html>

From marine9096 at gmail.com  Mon Mar  9 15:08:53 2020
From: marine9096 at gmail.com (James Bloomer)
Date: Mon, 9 Mar 2020 15:08:53 -0500
Subject: [crw-talk] Demo at Luther High School
In-Reply-To: <CAGK6+hC-RA-9S+c4E6gCMVF18auR5_rAQOj6FgNhXBdLvfZZFg@mail.gmail.com>
References: <CAGK6+hC-RA-9S+c4E6gCMVF18auR5_rAQOj6FgNhXBdLvfZZFg@mail.gmail.com>
Message-ID: <CAGK6+hD9SywHZJc37+q3c5yUdJqpmWG=eD0VSwNBCUMHWAv46Q@mail.gmail.com>

Good afternoon, The demo is right around the corner. Address is 1501 Wilson
St in Onalaska. We will be loading through the roll away door near the back
of the school near the recycling dumpsters. Setup begins at about 1200 with
the demo commencing at 1300(1 pm) We will be just demonstrating various
types of turning. No hands on for the students. For my demonstrators, be
sure to check tools and have different types of wood. Duane is bringing
his class lathes and we are going to be in the wood shop itself.
There will be a short intro and safety briefing. I anticipate that small
groups will be observing each of us as we turn. So they will have safety
glasses at minimum and be no closer than 5 feet to the lathe,or,  if the
demonstrator wants a bigger cushion, they can back them up further. Plan on
an hour and a half of turning tops. Clean up and help Duane load back up.
Hopefully if their is enough interest we will schedule a hands on demo for
the advanced students. I plan to mention the club and hopefully we can
attract a few to the meetings.

Thank you once again in everyone's assistance in this.

In Service
Jim Bloomer

On Fri, Feb 28, 2020 at 12:32 PM James Bloomer <marine9096 at gmail.com> wrote:

> Good afternoon, Just a reminder about the demo coming up at Luther High
> School on Mar 11th. I am still looking for additional demonstrators. We
> currently have 4
> Myself
> Duane
> Jay Johnson
> Jack
> We would be meeting at the High school to setup at 1200 with the demo
> commencing at 1 and going to 3. As I mentioned at the meeting this would be
> a demo only with no hands on. It would hopefully lead to a hands on demo
> later. Duane has graciously allowed us to use his class lathes so would
> only need to bring your tools, blanks and ways to hold the works.
>
>
> I am also looking for various works to display as well during the demo to
> showcase the variety of things that can be made with the lathe. If you
> would like to drop off at either the board meeting this Monday or make
> arrangements with me to meet to retrieve them. We would be returning them
> at the regular club meeting
>
> --
> In Service
> James A. Bloomer
>
>


-- 
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20200309/5e88698b/attachment.html>

From wisawdust at charter.net  Mon Mar  9 15:38:18 2020
From: wisawdust at charter.net (wisawdust)
Date: Mon, 09 Mar 2020 15:38:18 -0500
Subject: [crw-talk] Demo at Luther High School
In-Reply-To: <CAGK6+hD9SywHZJc37+q3c5yUdJqpmWG=eD0VSwNBCUMHWAv46Q@mail.gmail.com>
Message-ID: <mailman.0.1583786309.343379.crw-talk_crwoodturner.com@crwoodturner.com>

I could also use some help loading the lathes and unloading them at A-Line afterwards.DuaneSent from my Samsung Galaxy smartphone.
-------- Original message --------From: James Bloomer <marine9096 at gmail.com> Date: 3/9/20  3:09 PM  (GMT-06:00) To: CRW talk <crw-talk at crwoodturner.com> Subject: Re: [crw-talk] Demo at Luther High School Good afternoon, The demo is right around the corner. Address is 1501 Wilson St in Onalaska. We will be loading through the roll away door near the back of the school near the recycling dumpsters. Setup begins at about 1200 with the demo commencing at 1300(1 pm) We will be just demonstrating various types of turning. No hands on for the students. For my demonstrators, be sure to check tools and have different types of wood. Duane is bringing? his class lathes and we are going to be in the wood shop itself.?There will be a short intro and safety briefing. I anticipate that small groups will be observing each of us as we turn. So they will have safety glasses at minimum and be no closer than 5 feet to the lathe,or,? if the demonstrator wants a bigger cushion, they can back them up further. Plan on an hour and a half of turning tops. Clean up and help Duane load back up.?Hopefully if their is enough interest we will schedule a hands on demo for the advanced students. I plan to mention the club and hopefully we can attract a few to the meetings.?Thank you once again in everyone's assistance in this.?In ServiceJim BloomerOn Fri, Feb 28, 2020 at 12:32 PM James Bloomer <marine9096 at gmail.com> wrote:Good afternoon, Just a reminder about the demo coming up at Luther High School on Mar 11th. I am still looking for additional demonstrators. We currently have 4MyselfDuaneJay JohnsonJackWe would be meeting at the High school to setup at 1200 with the demo commencing at 1 and going to 3. As I mentioned at the meeting this would be a demo only with no hands on. It would hopefully lead to a hands on demo later. Duane has graciously allowed us to use his class lathes so would only need to bring your tools, blanks and ways to hold the works.?I am also looking for various works to display as well during the demo to showcase the variety of things that can be made with the lathe. If you would like to drop off at either the board meeting this Monday or make arrangements with me to meet to retrieve?them. We would be returning them at the regular club meeting--?In ServiceJames A. Bloomer
?
-- James A. Bloomer
?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20200309/2664f26f/attachment.html>

From marine9096 at gmail.com  Mon Mar 16 08:00:15 2020
From: marine9096 at gmail.com (James Bloomer)
Date: Mon, 16 Mar 2020 08:00:15 -0500
Subject: [crw-talk] March Meeting
Message-ID: <CAGK6+hB8OWMChomZifFuRgQ5F35RaxmumgWS0Vi8A1q01OceWw@mail.gmail.com>

Don't know about everyone, but not what I envisioned the roaring 20s to be.
I have been paying attention to the current situation and input from
members and officers. With that being said, the March meeting is cancelled
in light of the covid-19 concerns. We can see if Mark can shift his demo to
April. If not we can adjust. Everyone take care and hope to see you in a
virus free April

In service
Jim Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20200316/64df789b/attachment.html>

From rjpatros05 at gmail.com  Mon Mar 16 08:16:32 2020
From: rjpatros05 at gmail.com (Robert Patros)
Date: Mon, 16 Mar 2020 08:16:32 -0500
Subject: [crw-talk] March Meeting
In-Reply-To: <CAGK6+hB8OWMChomZifFuRgQ5F35RaxmumgWS0Vi8A1q01OceWw@mail.gmail.com>
References: <CAGK6+hB8OWMChomZifFuRgQ5F35RaxmumgWS0Vi8A1q01OceWw@mail.gmail.com>
Message-ID: <91055D0E-C7C9-4C49-B1D1-1D781CC095AD@gmail.com>

The right decision. Thanks, Jim. 

Sent from my iPhone

> On Mar 16, 2020, at 8:00 AM, James Bloomer <marine9096 at gmail.com> wrote:
> 
> ?
> Don't know about everyone, but not what I envisioned the roaring 20s to be. I have been paying attention to the current situation and input from members and officers. With that being said, the March meeting is cancelled in light of the covid-19 concerns. We can see if Mark can shift his demo to April. If not we can adjust. Everyone take care and hope to see you in a virus free April
> 
> In service
> Jim Bloomer
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/


From griff at mwt.net  Mon Mar 16 11:23:28 2020
From: griff at mwt.net (John & Donna Griffiths)
Date: Mon, 16 Mar 2020 11:23:28 -0500
Subject: [crw-talk] March Meeting
In-Reply-To: <CAGK6+hB8OWMChomZifFuRgQ5F35RaxmumgWS0Vi8A1q01OceWw@mail.gmail.com>
References: <CAGK6+hB8OWMChomZifFuRgQ5F35RaxmumgWS0Vi8A1q01OceWw@mail.gmail.com>
Message-ID: <e0ef80a7-407c-a8b6-2336-44e7696fc2b6@mwt.net>

Smart move.? Thank you.? I will be happy to provide whatever help I can 
with getting some programs set up once the covid 19 issues are out of 
the way.? John

On 3/16/2020 8:00 AM, James Bloomer wrote:
> Don't know about everyone, but not what I envisioned the roaring 20s 
> to be. I have been paying attention to the current situation and input 
> from members and officers. With that being said, the March meeting is 
> cancelled in light of the covid-19 concerns. We can see if Mark can 
> shift his demo to April. If not we can adjust. Everyone take care and 
> hope to see you in a virus free April
>
> In service
> Jim Bloomer
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20200316/ab2aa673/attachment.html>

From marine9096 at gmail.com  Fri Mar 20 09:41:12 2020
From: marine9096 at gmail.com (James Bloomer)
Date: Fri, 20 Mar 2020 09:41:12 -0500
Subject: [crw-talk] Updates and well wishes
Message-ID: <CAGK6+hBUCdu5COmWUw-i5JdbKC9YB_LyjMw_hpd2N_KiYM2=mA@mail.gmail.com>

Good Morning all, hope all is well with you and your family in the current
times.
I wanted to update everyone regarding the Luther HS demo. I would call it a
good success, we had about 40 students in attendance. After some
introductions and explanations and a safety briefing, we answered initial
questions and then proceeded to the lathes and began turning. We had 6
lathes set up so the kids broke into small groups and were encouraged to
visit each since we were turning different projects at each station.
The kids seemed genuinely interested in what was going on and I received
many questions during the time I was turning. They were impressed and
fascinated with various parts and tools.
After it was done we did speak with Mr. Larsen the instructor, he wants to
do a hands on with hi advanced students in May. We would be turning Pens.
Mr. Larsen gave us the wood to cut down to blanks (Thanks Jay for taking
that on) and they are going to get the hardware in the interim. So we would
Help them turn 2 pens each. We would provide the tools and lathes once
again.
I want to thank all that were able to be there and help. Bob Patros.
Kristine Klough, Duane Hill, Jack Fitzpatrick, Kevin Vossler, and Jaye
Johnson for volunteering your time energy and skills to make this demo
successful and helping secure an additional demo.
We were able to take a few pictures as well. They are on the Facebook page
and given to Rich for the newsletter.
I was also able to make contact with Tim Schneider at Three Brothers Bats
in West Salem. He is interested in hosting us for a demo on Bat turning at
his shop. Perhaps as our field trip in August. Tim has turn a few bats as
part of his business in the beginning and would love to share.

Hopefully we will be able to hold our April meeting and discuss face to
face.

In Service

-- 
James A. Bloomer
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20200320/28d4daaf/attachment.html>

From griff at mwt.net  Thu Mar 26 11:23:49 2020
From: griff at mwt.net (John & Donna Griffiths)
Date: Thu, 26 Mar 2020 11:23:49 -0500
Subject: [crw-talk] Fwd: Request
In-Reply-To: <1585233664.65971911@apps.rackspace.com>
References: <1585233664.65971911@apps.rackspace.com>
Message-ID: <89f9f444-5501-5690-b3c6-d4b04c224502@mwt.net>

*SCAM WARNING to all CRW members.*

*Members, if you get something like this, it is a scam.
*

It purports to be from Adrian but is a scam, I checked it out and sent 
the a request to the perpetrator to commit**an indecent act with 
himself. *John*



-------- Forwarded Message --------
Subject: 	Request
Date: 	Thu, 26 Mar 2020 10:41:04 -0400 (EDT)
From: 	Adrian Novak <adrian at president.com>
Reply-To: 	presd31 at gmail.com
To: 	griff at mwt.net



Hello John,

 ?? Can you please do me a favor? I would have called but not with my 
phone here. Get back to me as soon as possible.

Thank you
Adrian Novak

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20200326/e431a7cb/attachment.html>