[crw-talk] Set 2 of 2, emerging goblet
Jim Krarup
15krarupj at gmail.com
Wed Aug 5 13:01:32 CDT 2020
Very very nice
On Wed, Aug 5, 2020, 10:19 AM Robert Patros <rjpatros05 at gmail.com> wrote:
> Really cool! Great base!
>
> Sent from my iPhone
>
> > On Aug 5, 2020, at 10:02 AM, Mwt <griff at mwt.net> wrote:
> >
> >
> >
> > <IMG_4099.JPG>
> >
> >
> >
> > <IMG_4100.JPG>
> >
> >
> >
> > <IMG_4101.JPG>
> >
> > Members, thanks for looking. I was given a pile of freshly cut walnut
> branches a while ago, and had two choices: let them dry and probably never
> use them; or make stuff. You all know me well enough that I am sort of
> addicted to making stuff while awaiting the demise of the virus so...
> >
> > Long story short, one of the last pieces of the walnut branches had a
> crotch with three limbs growing out of it. So I cut the limbs off and left
> the part where they branches off. Mounted them on a screw chuck and turned
> a thin stemmed goblet. Left the stem fairly thick because of the walnut
> wood pith which would greatly weaken a thinner stem as it is prone to
> cracking. I hollowed the goblet part almost to the cambium, that can be
> seen showing through on the inside. I left the screw chuck hole so it
> would help dry the base as it is a good sized chunk of wet wood I did not
> want to have split during drying. Several coats of poly and a buff with a
> shop made grit, mineral oil and beeswax mixture and finished!
> >
> > Thanks for reading, let’s get some comments going.
> >
> > John
> > Sent from my iPhone_________________________________________
> > Use "Reply to All" or "Reply List" to reach the whole group, "Reply"
> goes only to sender.
> > ______
> > crw-talk mailing list
> > crw-talk at crwoodturner.com
> > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> > Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20200805/ca37f3e2/attachment.html>
More information about the crw-talk
mailing list