From adrian.novak at charter.net Sat Aug 1 21:02:40 2020 From: adrian.novak at charter.net (Adrian Novak) Date: Sat, 1 Aug 2020 21:02:40 -0500 Subject: [crw-talk] Fwd: Symposium fee update In-Reply-To: Message-ID: Begin forwarded message: > > From: Roger T Becker(rogertbecker at gmail.com) > Date: Aug 1, 2020 at 8:20 PM > To: Adrian Novak > Subject: Symposium fee update > > > > > View in your browser (http://BWT.clubexpress.com/content.aspx?page_id=722&club_id=411146&emtid=145167435462&mtid=435940343881&ht=0) > > > > > > > > > > > > > > > > > > > > I received the following email from Jason Clark and it will save you $10 if you register for the Symposium I promoted in the last emailing. > > > > Roger, I did a demo and a class for Badger Woodturners a couple of years ago, I think that's why I'm still on the mailing list. I'll be a demonstrator at this event and if you members use the discount code "Jason" at checkout they'll get an additional $10 off their registration. Early bird registration ends August 7th, after that the cost increase from $79 to $99. If they use my code now registration is $69 and will go up to $89 after August 7th. > > > Thanks to Jason Clark > > > > > Roger Becker > > > > > > > > > > > You have received this message from the mailing list of Badger Woodturners. If you would prefer not to receive these emails in the future, go to the opt-out page (https://BWT.clubexpress.com/content.aspx?page_id=356&club_id=411146&item_id=435940343881) and modify your privacy settings. You can also request to be removed from our database completely. -------------- next part -------------- An HTML attachment was scrubbed... URL: From adrian.novak at charter.net Sat Aug 1 21:08:04 2020 From: adrian.novak at charter.net (Adrian Novak) Date: Sat, 1 Aug 2020 21:08:04 -0500 Subject: [crw-talk] Fwd: Upcoming Events In-Reply-To: Message-ID: Begin forwarded message: > > From: Roger T Becker(rogertbecker at gmail.com) > Date: Aug 1, 2020 at 7:10 PM > To: Adrian Novak > Subject: Upcoming Events > > > > > View in your browser (http://BWT.clubexpress.com/content.aspx?page_id=722&club_id=411146&emtid=145165038241&mtid=435940343881&ht=0) > > > > > > > > > > > > > > > > > > > > This has been a different summer in many ways. One of them is that the BWT has continued to be active while in the past we have hibernated and come out only for an annual picnic. The board would like to see more members participating in our virtual meetings. Connecting with Zoom is a simple process and you will catch on to how it works in a very short time. If you have not tried it and want help, contact me or one of the other board members. We would like to see your face, even if it is only on our computer. > > > > I want to call your attention to three upcoming opportunities. > > > > First of all is the August 11 virtual demonstration by Cindy Drozda on Fabulous Finials. She has made her mark in the turning world with her finials and is a sought after demonstrator. One advantage to virtual demonstrations is that everyone gets a better view than a front row seat. Several members have commented to me how they like the virtual presentations for this reason. Register now and pay the $10 fee on the web site after signing in. The flyer is included below and you can see some photos from the demo Cindy did for our club in 2013 by clicking on this link. Cindy Drozda (https://BWT.clubexpress.com/content.aspx?page_id=187&club_id=411146&module_id=132764) > > > > > > > > > > > > > > > > > > The second is a virtual symposium in September that has been brought to my attention by Jim Smith and Doug Fuson. You can get the information at Woodturners World Wide Symposium (http://www.woodturnersworldwide.com/) There is an early bird registration that will save you a few bucks if you act now. Check it out as it seems to me to be a worthwhile opportunity at a reasonable price. > > > > The third is a reminder of our "Show and Tell" forum. Several posts have been made this month but we would like more and posting an image of a turning will enter you in a drawing for a $20 Woodcraft gift certificate. > > > > While we cannot meet face to face we are still keeping active and in touch. > > > > Roger Becker, BWT President > > > > > > > > > > > You have received this message from the mailing list of Badger Woodturners. If you would prefer not to receive these emails in the future, go to the opt-out page (https://BWT.clubexpress.com/content.aspx?page_id=356&club_id=411146&item_id=435940343881) and modify your privacy settings. You can also request to be removed from our database completely. -------------- next part -------------- An HTML attachment was scrubbed... URL: From rjpatros05 at gmail.com Sun Aug 2 17:43:03 2020 From: rjpatros05 at gmail.com (Robert Patros) Date: Sun, 2 Aug 2020 17:43:03 -0500 Subject: [crw-talk] Small bowls Message-ID: <46DE4B2C-8DFB-40FB-B5FD-C9A85C1203C0@gmail.com> On the finishing rack. A cherry natural edge (The bark fell off. John Jordan told us, at a past CRW demo, he always removed the bark because he believed it would fall off eventually. That has not been my experience. I would have preserved it if I could have). And, a mulberry bowl. The mulberry was very dry. I took very light cuts forming the inside as not to shear off the tenon ( which I have done way too often with small tenons!). I left the tenon as the foot, smaller than what is the usual, but I like it that way. Hope you?re having fun in your shop! Stay safe. -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_4665.jpg Type: image/jpeg Size: 1764866 bytes Desc: not available URL: -------------- next part -------------- Sent from my iPhone From aaronagesicki at gmail.com Sun Aug 2 18:07:12 2020 From: aaronagesicki at gmail.com (aaronagesicki at gmail.com) Date: Sun, 2 Aug 2020 18:07:12 -0500 Subject: [crw-talk] Small bowls In-Reply-To: <46DE4B2C-8DFB-40FB-B5FD-C9A85C1203C0@gmail.com> References: <46DE4B2C-8DFB-40FB-B5FD-C9A85C1203C0@gmail.com> Message-ID: <01ff01d66921$a891c110$f9b54330$@gmail.com> Small feet, aka tenons, are more artistically pleasing. Good choice. Aaron Gesicki -----Original Message----- From: crw-talk On Behalf Of Robert Patros Sent: Sunday, August 2, 2020 5:43 PM To: crw-talk at crwoodturner.com Subject: [crw-talk] Small bowls On the finishing rack. A cherry natural edge (The bark fell off. John Jordan told us, at a past CRW demo, he always removed the bark because he believed it would fall off eventually. That has not been my experience. I would have preserved it if I could have). And, a mulberry bowl. The mulberry was very dry. I took very light cuts forming the inside as not to shear off the tenon ( which I have done way too often with small tenons!). I left the tenon as the foot, smaller than what is the usual, but I like it that way. Hope you?re having fun in your shop! Stay safe. From aaronagesicki at gmail.com Sun Aug 2 18:09:49 2020 From: aaronagesicki at gmail.com (aaronagesicki at gmail.com) Date: Sun, 2 Aug 2020 18:09:49 -0500 Subject: [crw-talk] Small bowls In-Reply-To: <46DE4B2C-8DFB-40FB-B5FD-C9A85C1203C0@gmail.com> References: <46DE4B2C-8DFB-40FB-B5FD-C9A85C1203C0@gmail.com> Message-ID: <020201d66922$064889b0$12d99d10$@gmail.com> The natural edged piece is nicely balanced and symmetrical. Does seem a bit thick from this pic, but the proof is in the holding. Aaron Gesicki -----Original Message----- From: crw-talk On Behalf Of Robert Patros Sent: Sunday, August 2, 2020 5:43 PM To: crw-talk at crwoodturner.com Subject: [crw-talk] Small bowls On the finishing rack. A cherry natural edge (The bark fell off. John Jordan told us, at a past CRW demo, he always removed the bark because he believed it would fall off eventually. That has not been my experience. I would have preserved it if I could have). And, a mulberry bowl. The mulberry was very dry. I took very light cuts forming the inside as not to shear off the tenon ( which I have done way too often with small tenons!). I left the tenon as the foot, smaller than what is the usual, but I like it that way. Hope you?re having fun in your shop! Stay safe. From kengrunke at gmail.com Sun Aug 2 18:27:30 2020 From: kengrunke at gmail.com (Ken Grunke) Date: Sun, 2 Aug 2020 18:27:30 -0500 Subject: [crw-talk] Small bowls In-Reply-To: <46DE4B2C-8DFB-40FB-B5FD-C9A85C1203C0@gmail.com> References: <46DE4B2C-8DFB-40FB-B5FD-C9A85C1203C0@gmail.com> Message-ID: <669e64f5-f146-a2df-fc36-52aba3baaf65@gmail.com> Sometimes I get lucky with the bark edges, more often not. If just one little piece breaks off, you almost have to remove it all.? Well done, Bob. On 8/2/20 5:43 PM, Robert Patros wrote: > On the finishing rack. A cherry natural edge (The bark fell off. John Jordan told us, at a past CRW demo, he always removed the bark because he believed it would fall off eventually. That has not been my experience. I would have preserved it if I could have). > And, a mulberry bowl. The mulberry was very dry. I took very light cuts forming the inside as not to shear off the tenon ( which I have done way too often with small tenons!). I left the tenon as the foot, smaller than what is the usual, but I like it that way. > Hope you?re having fun in your shop! Stay safe. > > > > Sent from my iPhone > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From kengrunke at gmail.com Sun Aug 2 18:30:46 2020 From: kengrunke at gmail.com (Ken Grunke) Date: Sun, 2 Aug 2020 18:30:46 -0500 Subject: [crw-talk] Bark edge goblet Message-ID: <398d3abb-dfb3-889f-3da0-e49405df5964@gmail.com> This one I got lucky with. Must have been winter-cut. 5 1/2" tall, 4" across the rim. Finished with wipe-on poly. It's been two years since I turned it, so has had the test of time. -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_0211-ash_naturaledge_goblet_vase.JPG Type: image/jpeg Size: 114342 bytes Desc: not available URL: From kengrunke at gmail.com Sun Aug 2 18:36:15 2020 From: kengrunke at gmail.com (Ken Grunke) Date: Sun, 2 Aug 2020 18:36:15 -0500 Subject: [crw-talk] Winged goblet vases Message-ID: Here, the bark didn't survive. There was a ragged edge in some parts, so I trimmed it with a knife and colored the edge with prismacolor markers. The larger one is 5 1/2" tall x 4" across the wings and the mini is 4 1/2" tall x 3" across. These were turned just last week. Wipe-on poly finish. -------------- next part -------------- A non-text attachment was scrubbed... Name: winged_vase_pair1.JPG Type: image/jpeg Size: 303062 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: winged_vase_pair2.JPG Type: image/jpeg Size: 315389 bytes Desc: not available URL: From rjpatros05 at gmail.com Sun Aug 2 18:38:19 2020 From: rjpatros05 at gmail.com (Robert Patros) Date: Sun, 2 Aug 2020 18:38:19 -0500 Subject: [crw-talk] Small bowls In-Reply-To: <01ff01d66921$a891c110$f9b54330$@gmail.com> References: <01ff01d66921$a891c110$f9b54330$@gmail.com> Message-ID: <5C528582-97E3-4EA2-85E8-2F15225B04C6@gmail.com> Thanks, Aaron. I think so, too. Sent from my iPhone > On Aug 2, 2020, at 6:07 PM, aaronagesicki at gmail.com wrote: > > ?Small feet, aka tenons, are more artistically pleasing. Good choice. > > > Aaron Gesicki > > > > -----Original Message----- > From: crw-talk On Behalf Of Robert Patros > Sent: Sunday, August 2, 2020 5:43 PM > To: crw-talk at crwoodturner.com > Subject: [crw-talk] Small bowls > > On the finishing rack. A cherry natural edge (The bark fell off. John Jordan told us, at a past CRW demo, he always removed the bark because he believed it would fall off eventually. That has not been my experience. I would have preserved it if I could have). > And, a mulberry bowl. The mulberry was very dry. I took very light cuts forming the inside as not to shear off the tenon ( which I have done way too often with small tenons!). I left the tenon as the foot, smaller than what is the usual, but I like it that way. > Hope you?re having fun in your shop! Stay safe. > > > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ From rjpatros05 at gmail.com Sun Aug 2 18:39:23 2020 From: rjpatros05 at gmail.com (Robert Patros) Date: Sun, 2 Aug 2020 18:39:23 -0500 Subject: [crw-talk] Small bowls In-Reply-To: <020201d66922$064889b0$12d99d10$@gmail.com> References: <020201d66922$064889b0$12d99d10$@gmail.com> Message-ID: <9662E923-A398-49E1-855F-A151195D8CE4@gmail.com> It?s not too bad. I probably keep them a bit thicker than some. Sent from my iPhone > On Aug 2, 2020, at 6:11 PM, aaronagesicki at gmail.com wrote: > > ?The natural edged piece is nicely balanced and symmetrical. Does seem a bit thick from this pic, but the proof is in the holding. > > > Aaron Gesicki > > > > -----Original Message----- > From: crw-talk On Behalf Of Robert Patros > Sent: Sunday, August 2, 2020 5:43 PM > To: crw-talk at crwoodturner.com > Subject: [crw-talk] Small bowls > > On the finishing rack. A cherry natural edge (The bark fell off. John Jordan told us, at a past CRW demo, he always removed the bark because he believed it would fall off eventually. That has not been my experience. I would have preserved it if I could have). > And, a mulberry bowl. The mulberry was very dry. I took very light cuts forming the inside as not to shear off the tenon ( which I have done way too often with small tenons!). I left the tenon as the foot, smaller than what is the usual, but I like it that way. > Hope you?re having fun in your shop! Stay safe. > > > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ From rjpatros05 at gmail.com Sun Aug 2 18:43:03 2020 From: rjpatros05 at gmail.com (Robert Patros) Date: Sun, 2 Aug 2020 18:43:03 -0500 Subject: [crw-talk] Small bowls In-Reply-To: <669e64f5-f146-a2df-fc36-52aba3baaf65@gmail.com> References: <669e64f5-f146-a2df-fc36-52aba3baaf65@gmail.com> Message-ID: <53CCF7F3-5634-4736-9425-9A18A54A3DB9@gmail.com> Actually, I have cheated in the past with some natural edges whereby the bark fell off a small area. I torch it. It blends in well and is hardly noticeable. Don?t tell anybody! Sent from my iPhone > On Aug 2, 2020, at 6:27 PM, Ken Grunke wrote: > > ? > Sometimes I get lucky with the bark edges, more often not. If just one little piece breaks off, you almost have to remove it all. Well done, Bob. > >> On 8/2/20 5:43 PM, Robert Patros wrote: >> On the finishing rack. A cherry natural edge (The bark fell off. John Jordan told us, at a past CRW demo, he always removed the bark because he believed it would fall off eventually. That has not been my experience. I would have preserved it if I could have). >> And, a mulberry bowl. The mulberry was very dry. I took very light cuts forming the inside as not to shear off the tenon ( which I have done way too often with small tenons!). I left the tenon as the foot, smaller than what is the usual, but I like it that way. >> Hope you?re having fun in your shop! Stay safe. >> >> >> >> >> Sent from my iPhone >> >> >> _________________________________________ >> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >> ______ >> crw-talk mailing list >> crw-talk at crwoodturner.com >> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From rjpatros05 at gmail.com Sun Aug 2 19:59:55 2020 From: rjpatros05 at gmail.com (Robert Patros) Date: Sun, 2 Aug 2020 19:59:55 -0500 Subject: [crw-talk] Small bowls In-Reply-To: <020201d66922$064889b0$12d99d10$@gmail.com> References: <020201d66922$064889b0$12d99d10$@gmail.com> Message-ID: <3EE17265-142B-4663-B3C7-2F5927C1F62A@gmail.com> P.S. I appreciate your thoughts on my work. It?s like the traditional Instant Gallery. Sent from my iPhone > On Aug 2, 2020, at 6:11 PM, aaronagesicki at gmail.com wrote: > > ?The natural edged piece is nicely balanced and symmetrical. Does seem a bit thick from this pic, but the proof is in the holding. > > > Aaron Gesicki > > > > -----Original Message----- > From: crw-talk On Behalf Of Robert Patros > Sent: Sunday, August 2, 2020 5:43 PM > To: crw-talk at crwoodturner.com > Subject: [crw-talk] Small bowls > > On the finishing rack. A cherry natural edge (The bark fell off. John Jordan told us, at a past CRW demo, he always removed the bark because he believed it would fall off eventually. That has not been my experience. I would have preserved it if I could have). > And, a mulberry bowl. The mulberry was very dry. I took very light cuts forming the inside as not to shear off the tenon ( which I have done way too often with small tenons!). I left the tenon as the foot, smaller than what is the usual, but I like it that way. > Hope you?re having fun in your shop! Stay safe. > > > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ From mogoldfish at yahoo.com Sun Aug 2 20:43:58 2020 From: mogoldfish at yahoo.com (Kristine Clough) Date: Mon, 3 Aug 2020 01:43:58 +0000 (UTC) Subject: [crw-talk] Small bowls In-Reply-To: <669e64f5-f146-a2df-fc36-52aba3baaf65@gmail.com> References: <46DE4B2C-8DFB-40FB-B5FD-C9A85C1203C0@gmail.com> <669e64f5-f146-a2df-fc36-52aba3baaf65@gmail.com> Message-ID: <860465616.515119.1596419038713@mail.yahoo.com> Bob, I like the band saw blades finishing rack. Sent from Yahoo Mail on Android On Sun, Aug 2, 2020 at 6:27 PM, Ken Grunke wrote: _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: Untitled URL: From larryandros at msn.com Sun Aug 2 21:18:01 2020 From: larryandros at msn.com (LARRY KRAJEWSKI) Date: Mon, 3 Aug 2020 02:18:01 +0000 Subject: [crw-talk] Small bowls In-Reply-To: <860465616.515119.1596419038713@mail.yahoo.com> References: <46DE4B2C-8DFB-40FB-B5FD-C9A85C1203C0@gmail.com> <669e64f5-f146-a2df-fc36-52aba3baaf65@gmail.com>, <860465616.515119.1596419038713@mail.yahoo.com> Message-ID: Outstanding! Sent from my iPad On Aug 2, 2020, at 8:44 PM, Kristine Clough > wrote: Bob, I like the band saw blades finishing rack. Sent from Yahoo Mail on Android On Sun, Aug 2, 2020 at 6:27 PM, Ken Grunke > wrote: _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From rjpatros05 at gmail.com Sun Aug 2 22:07:23 2020 From: rjpatros05 at gmail.com (Robert Patros) Date: Sun, 2 Aug 2020 22:07:23 -0500 Subject: [crw-talk] Small bowls In-Reply-To: References: Message-ID: <6325DF17-221E-47E0-9646-C303D5D5221C@gmail.com> Thanks, Larry! Kris, I have plenty of bandsaw blades already made up if you want some. Sent from my iPhone > On Aug 2, 2020, at 9:18 PM, LARRY KRAJEWSKI wrote: > > ? Outstanding! > > Sent from my iPad > >> On Aug 2, 2020, at 8:44 PM, Kristine Clough wrote: >> >> Bob, I like the band saw blades finishing rack. >> >> Sent from Yahoo Mail on Android >> >> On Sun, Aug 2, 2020 at 6:27 PM, Ken Grunke >> wrote: >> _________________________________________ >> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >> ______ >> crw-talk mailing list >> crw-talk at crwoodturner.com >> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ >> >> _________________________________________ >> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >> ______ >> crw-talk mailing list >> crw-talk at crwoodturner.com >> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From griff at mwt.net Mon Aug 3 15:42:24 2020 From: griff at mwt.net (John & Donna Griffiths) Date: Mon, 3 Aug 2020 15:42:24 -0500 Subject: [crw-talk] Small bowls In-Reply-To: <46DE4B2C-8DFB-40FB-B5FD-C9A85C1203C0@gmail.com> References: <46DE4B2C-8DFB-40FB-B5FD-C9A85C1203C0@gmail.com> Message-ID: <3d45bc5a-261a-ce7f-e7f1-aa5a0881b7d3@mwt.net> Very nice pieces.? I would not say the bark always falls off, but I also have no where the experience of John Jordan.? I often reinforce it with CA, and some pieces just look better barkless. John On 8/2/2020 5:43 PM, Robert Patros wrote: > On the finishing rack. A cherry natural edge (The bark fell off. John Jordan told us, at a past CRW demo, he always removed the bark because he believed it would fall off eventually. That has not been my experience. I would have preserved it if I could have). > And, a mulberry bowl. The mulberry was very dry. I took very light cuts forming the inside as not to shear off the tenon ( which I have done way too often with small tenons!). I left the tenon as the foot, smaller than what is the usual, but I like it that way. > Hope you?re having fun in your shop! Stay safe. > > > > Sent from my iPhone > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From griff at mwt.net Mon Aug 3 15:44:50 2020 From: griff at mwt.net (John & Donna Griffiths) Date: Mon, 3 Aug 2020 15:44:50 -0500 Subject: [crw-talk] Bark edge goblet In-Reply-To: <398d3abb-dfb3-889f-3da0-e49405df5964@gmail.com> References: <398d3abb-dfb3-889f-3da0-e49405df5964@gmail.com> Message-ID: Whoa Ken, that is a dandy!? Thanks for posting, John On 8/2/2020 6:30 PM, Ken Grunke wrote: > This one I got lucky with. Must have been winter-cut. 5 1/2" tall, 4" > across the rim. Finished with wipe-on poly. It's been two years since > I turned it, so has had the test of time. > > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From griff at mwt.net Mon Aug 3 15:51:19 2020 From: griff at mwt.net (John & Donna Griffiths) Date: Mon, 3 Aug 2020 15:51:19 -0500 Subject: [crw-talk] Small bowls In-Reply-To: <6325DF17-221E-47E0-9646-C303D5D5221C@gmail.com> References: <6325DF17-221E-47E0-9646-C303D5D5221C@gmail.com> Message-ID: <68e71ffd-c7e1-fb54-7c9e-8b811468ead5@mwt.net> Members, thank you all for posting photos of your work and commenting as well.? I believe it is important to keep club interaction going since we cannot meet.? I have another unusual piece I will post soon, when I can get it dry enough and enough finish on it to look decent.? I think I will post some process photos too, since I took some.? John On 8/2/2020 10:07 PM, Robert Patros wrote: > Thanks, Larry! > > Kris, I have plenty of bandsaw blades already made up if you want some. > > Sent from my iPhone > >> On Aug 2, 2020, at 9:18 PM, LARRY KRAJEWSKI wrote: >> >> ? Outstanding! >> >> Sent from my iPad >> >> On Aug 2, 2020, at 8:44 PM, Kristine Clough > > wrote: >> >>> Bob, I like the band saw blades finishing rack. >>> >>> Sent from Yahoo Mail on Android >>> >>> >>> On Sun, Aug 2, 2020 at 6:27 PM, Ken Grunke >>> > wrote: >>> _________________________________________ >>> Use "Reply to All" or "Reply List" to reach the whole group, >>> "Reply" goes only to sender. >>> ______ >>> crw-talk mailing list >>> crw-talk at crwoodturner.com >>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >>> Check the archive to make sure your message was sent: >>> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ >>> >>> >>> _________________________________________ >>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" >>> goes only to sender. >>> ______ >>> crw-talk mailing list >>> crw-talk at crwoodturner.com >>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >>> Check the archive to make sure your message was sent: >>> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ >> _________________________________________ >> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" >> goes only to sender. >> ______ >> crw-talk mailing list >> crw-talk at crwoodturner.com >> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >> Check the archive to make sure your message was sent: >> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From rjpatros05 at gmail.com Mon Aug 3 20:04:47 2020 From: rjpatros05 at gmail.com (Robert Patros) Date: Mon, 3 Aug 2020 20:04:47 -0500 Subject: [crw-talk] Small bowls In-Reply-To: <3d45bc5a-261a-ce7f-e7f1-aa5a0881b7d3@mwt.net> References: <3d45bc5a-261a-ce7f-e7f1-aa5a0881b7d3@mwt.net> Message-ID: Actually, I think he tries to take the bark off if it?s not tight. Sent from my iPhone > On Aug 3, 2020, at 3:42 PM, John & Donna Griffiths wrote: > > ? > Very nice pieces. I would not say the bark always falls off, but I also have no where the experience of John Jordan. I often reinforce it with CA, and some pieces just look better barkless. John > > On 8/2/2020 5:43 PM, Robert Patros wrote: >> On the finishing rack. A cherry natural edge (The bark fell off. John Jordan told us, at a past CRW demo, he always removed the bark because he believed it would fall off eventually. That has not been my experience. I would have preserved it if I could have). >> And, a mulberry bowl. The mulberry was very dry. I took very light cuts forming the inside as not to shear off the tenon ( which I have done way too often with small tenons!). I left the tenon as the foot, smaller than what is the usual, but I like it that way. >> Hope you?re having fun in your shop! Stay safe. >> >> >> >> >> Sent from my iPhone >> >> >> _________________________________________ >> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >> ______ >> crw-talk mailing list >> crw-talk at crwoodturner.com >> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From kengrunke at gmail.com Mon Aug 3 20:58:11 2020 From: kengrunke at gmail.com (Ken Grunke) Date: Mon, 3 Aug 2020 20:58:11 -0500 Subject: [crw-talk] Bark edge goblet In-Reply-To: References: <398d3abb-dfb3-889f-3da0-e49405df5964@gmail.com> Message-ID: <78f10173-807c-711a-dca2-32408227bdd5@gmail.com> Thanks, John. I was wondering if my 2 posts actually reached the group! Ken Grunke On 8/3/20 3:44 PM, John & Donna Griffiths wrote: > > Whoa Ken, that is a dandy!? Thanks for posting, John > > On 8/2/2020 6:30 PM, Ken Grunke wrote: >> This one I got lucky with. Must have been winter-cut. 5 1/2" tall, 4" >> across the rim. Finished with wipe-on poly. It's been two years since >> I turned it, so has had the test of time. >> >> >> _________________________________________ >> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >> ______ >> crw-talk mailing list >> crw-talk at crwoodturner.com >> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >> Check the archive to make sure your message was sent:http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From rjpatros05 at gmail.com Mon Aug 3 21:09:06 2020 From: rjpatros05 at gmail.com (Robert Patros) Date: Mon, 3 Aug 2020 21:09:06 -0500 Subject: [crw-talk] Bark edge goblet In-Reply-To: <78f10173-807c-711a-dca2-32408227bdd5@gmail.com> References: <78f10173-807c-711a-dca2-32408227bdd5@gmail.com> Message-ID: <06903728-13FF-4FB0-BCD5-139E9E1CB7DA@gmail.com> I didn?t get your posts. I?ve been getting posts without the attachments. Sent from my iPhone > On Aug 3, 2020, at 8:58 PM, Ken Grunke wrote: > > ? > Thanks, John. I was wondering if my 2 posts actually reached the group! > > Ken Grunke > > On 8/3/20 3:44 PM, John & Donna Griffiths wrote: >> Whoa Ken, that is a dandy! Thanks for posting, John >> >> On 8/2/2020 6:30 PM, Ken Grunke wrote: >>> This one I got lucky with. Must have been winter-cut. 5 1/2" tall, 4" across the rim. Finished with wipe-on poly. It's been two years since I turned it, so has had the test of time. >>> >>> >>> >>> _________________________________________ >>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >>> ______ >>> crw-talk mailing list >>> crw-talk at crwoodturner.com >>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ >> >> >> _________________________________________ >> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >> ______ >> crw-talk mailing list >> crw-talk at crwoodturner.com >> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From kengrunke at gmail.com Mon Aug 3 21:25:31 2020 From: kengrunke at gmail.com (Ken Grunke) Date: Mon, 3 Aug 2020 21:25:31 -0500 Subject: [crw-talk] Bark edge goblet In-Reply-To: <06903728-13FF-4FB0-BCD5-139E9E1CB7DA@gmail.com> References: <78f10173-807c-711a-dca2-32408227bdd5@gmail.com> <06903728-13FF-4FB0-BCD5-139E9E1CB7DA@gmail.com> Message-ID: <979a54d4-e29d-d5c5-3b0f-02bbeb82b9dc@gmail.com> Does anyone get this with the image? Thanks, Bob. On 8/3/20 9:09 PM, Robert Patros wrote: > I didn?t get your posts. I?ve been getting posts without the attachments. > > Sent from my iPhone > >> On Aug 3, 2020, at 8:58 PM, Ken Grunke wrote: >> >> ? >> >> Thanks, John. I was wondering if my 2 posts actually reached the group! >> >> Ken Grunke >> >> On 8/3/20 3:44 PM, John & Donna Griffiths wrote: >>> >>> Whoa Ken, that is a dandy!? Thanks for posting, John >>> >>> On 8/2/2020 6:30 PM, Ken Grunke wrote: >>>> This one I got lucky with. Must have been winter-cut. 5 1/2" tall, >>>> 4" across the rim. Finished with wipe-on poly. It's been two years >>>> since I turned it, so has had the test of time. >>>> >>>> >>>> _________________________________________ >>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >>>> ______ >>>> crw-talk mailing list >>>> crw-talk at crwoodturner.com >>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >>>> Check the archive to make sure your message was sent:http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ >>> >>> _________________________________________ >>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >>> ______ >>> crw-talk mailing list >>> crw-talk at crwoodturner.com >>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >>> Check the archive to make sure your message was sent:http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ >> _________________________________________ >> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" >> goes only to sender. >> ______ >> crw-talk mailing list >> crw-talk at crwoodturner.com >> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >> Check the archive to make sure your message was sent: >> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_0211-ash_naturaledge_goblet_vase.JPG Type: image/jpeg Size: 114342 bytes Desc: not available URL: From mogoldfish at yahoo.com Mon Aug 3 21:31:38 2020 From: mogoldfish at yahoo.com (Kristine Clough) Date: Tue, 4 Aug 2020 02:31:38 +0000 (UTC) Subject: [crw-talk] Bark edge goblet In-Reply-To: <979a54d4-e29d-d5c5-3b0f-02bbeb82b9dc@gmail.com> References: <78f10173-807c-711a-dca2-32408227bdd5@gmail.com> <06903728-13FF-4FB0-BCD5-139E9E1CB7DA@gmail.com> <979a54d4-e29d-d5c5-3b0f-02bbeb82b9dc@gmail.com> Message-ID: <2067816647.1010971.1596508298495@mail.yahoo.com> Ken, I got your original post of the goblet Kris Sent from Yahoo Mail on Android On Mon, Aug 3, 2020 at 9:25 PM, Ken Grunke wrote: _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: Untitled URL: From aaronagesicki at gmail.com Mon Aug 3 21:35:37 2020 From: aaronagesicki at gmail.com (aaronagesicki at gmail.com) Date: Mon, 3 Aug 2020 21:35:37 -0500 Subject: [crw-talk] Bark edge goblet In-Reply-To: <979a54d4-e29d-d5c5-3b0f-02bbeb82b9dc@gmail.com> References: <78f10173-807c-711a-dca2-32408227bdd5@gmail.com> <06903728-13FF-4FB0-BCD5-139E9E1CB7DA@gmail.com> <979a54d4-e29d-d5c5-3b0f-02bbeb82b9dc@gmail.com> Message-ID: <037901d66a07$f09043b0$d1b0cb10$@gmail.com> Got it now. Not previously. It?s nice. Aaron Gesicki From: crw-talk On Behalf Of Ken Grunke Sent: Monday, August 3, 2020 9:26 PM To: crw-talk at crwoodturner.com Subject: Re: [crw-talk] Bark edge goblet Does anyone get this with the image? Thanks, Bob. On 8/3/20 9:09 PM, Robert Patros wrote: I didn?t get your posts. I?ve been getting posts without the attachments. Sent from my iPhone On Aug 3, 2020, at 8:58 PM, Ken Grunke wrote: ? Thanks, John. I was wondering if my 2 posts actually reached the group! Ken Grunke On 8/3/20 3:44 PM, John & Donna Griffiths wrote: Whoa Ken, that is a dandy! Thanks for posting, John On 8/2/2020 6:30 PM, Ken Grunke wrote: This one I got lucky with. Must have been winter-cut. 5 1/2" tall, 4" across the rim. Finished with wipe-on poly. It's been two years since I turned it, so has had the test of time. _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From kengrunke at gmail.com Mon Aug 3 21:36:18 2020 From: kengrunke at gmail.com (Ken Grunke) Date: Mon, 3 Aug 2020 21:36:18 -0500 Subject: [crw-talk] Winged goblet vases Message-ID: <705c9eec-f63c-87e2-1b9f-ba6bf0189983@gmail.com> Resending this from last night, as the attachments were stripped and I think I fixed that issue. Continuing the topic of bark edges here. On these, the bark didn't survive. There was a ragged edge in some parts, so I trimmed it with a knife and colored the edge with prismacolor markers. The larger one, of Willow, is 5 1/2" tall x 4" across the wings and the mini, of Red Elm, is 4 1/2" tall x 3" across.? These were turned just last week. Wipe-on poly finish. Hope this works! -------------- next part -------------- A non-text attachment was scrubbed... Name: winged_vase_pair1.JPG Type: image/jpeg Size: 303062 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: winged_vase_pair2.JPG Type: image/jpeg Size: 315389 bytes Desc: not available URL: From kengrunke at gmail.com Mon Aug 3 21:37:30 2020 From: kengrunke at gmail.com (Ken Grunke) Date: Mon, 3 Aug 2020 21:37:30 -0500 Subject: [crw-talk] Bark edge goblet In-Reply-To: <037901d66a07$f09043b0$d1b0cb10$@gmail.com> References: <78f10173-807c-711a-dca2-32408227bdd5@gmail.com> <06903728-13FF-4FB0-BCD5-139E9E1CB7DA@gmail.com> <979a54d4-e29d-d5c5-3b0f-02bbeb82b9dc@gmail.com> <037901d66a07$f09043b0$d1b0cb10$@gmail.com> Message-ID: <9ff8bec3-47a5-7bf0-0558-e7c09de77d3a@gmail.com> Thanks, Aaron. On 8/3/20 9:35 PM, aaronagesicki at gmail.com wrote: > > Got it now. Not previously. > > It?s nice. > > Aaron Gesicki > > *From:*crw-talk *On Behalf Of *Ken > Grunke > *Sent:* Monday, August 3, 2020 9:26 PM > *To:* crw-talk at crwoodturner.com > *Subject:* Re: [crw-talk] Bark edge goblet > > Does anyone get this with the image? > > Thanks, Bob. > > On 8/3/20 9:09 PM, Robert Patros wrote: > > I didn?t get your posts. I?ve been getting posts without the > attachments. > > Sent from my iPhone > > > > On Aug 3, 2020, at 8:58 PM, Ken Grunke > wrote: > > ? > > Thanks, John. I was wondering if my 2 posts actually reached > the group! > > Ken Grunke > > On 8/3/20 3:44 PM, John & Donna Griffiths wrote: > > Whoa Ken, that is a dandy!? Thanks for posting, John > > On 8/2/2020 6:30 PM, Ken Grunke wrote: > > This one I got lucky with. Must have been winter-cut. > 5 1/2" tall, 4" across the rim. Finished with wipe-on > poly. It's been two years since I turned it, so has > had the test of time. > > > > _________________________________________ > > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > > ______ > > crw-talk mailing list > > crw-talk at crwoodturner.com > > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > > Check the archive to make sure your message was sent:http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > > > > _________________________________________ > > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > > ______ > > crw-talk mailing list > > crw-talk at crwoodturner.com > > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > > Check the archive to make sure your message was sent:http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, > "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: > http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > > > > _________________________________________ > > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > > ______ > > crw-talk mailing list > > crw-talk at crwoodturner.com > > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > > Check the archive to make sure your message was sent:http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From rjpatros05 at gmail.com Mon Aug 3 21:37:32 2020 From: rjpatros05 at gmail.com (Robert Patros) Date: Mon, 3 Aug 2020 21:37:32 -0500 Subject: [crw-talk] Bark edge goblet In-Reply-To: <979a54d4-e29d-d5c5-3b0f-02bbeb82b9dc@gmail.com> References: <979a54d4-e29d-d5c5-3b0f-02bbeb82b9dc@gmail.com> Message-ID: <63068B07-5B52-499F-A129-DEAD1567775C@gmail.com> I got it. Sent from my iPhone > On Aug 3, 2020, at 9:25 PM, Ken Grunke wrote: > > ? > Does anyone get this with the image? > > Thanks, Bob. > >> On 8/3/20 9:09 PM, Robert Patros wrote: >> I didn?t get your posts. I?ve been getting posts without the attachments. >> >> Sent from my iPhone >> >>> On Aug 3, 2020, at 8:58 PM, Ken Grunke wrote: >>> >>> ? >>> Thanks, John. I was wondering if my 2 posts actually reached the group! >>> >>> Ken Grunke >>> >>> On 8/3/20 3:44 PM, John & Donna Griffiths wrote: >>>> Whoa Ken, that is a dandy! Thanks for posting, John >>>> >>>> On 8/2/2020 6:30 PM, Ken Grunke wrote: >>>>> This one I got lucky with. Must have been winter-cut. 5 1/2" tall, 4" across the rim. Finished with wipe-on poly. It's been two years since I turned it, so has had the test of time. >>>>> >>>>> >>>>> >>>>> _________________________________________ >>>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >>>>> ______ >>>>> crw-talk mailing list >>>>> crw-talk at crwoodturner.com >>>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >>>>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ >>>> >>>> >>>> _________________________________________ >>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >>>> ______ >>>> crw-talk mailing list >>>> crw-talk at crwoodturner.com >>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >>>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ >>> _________________________________________ >>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >>> ______ >>> crw-talk mailing list >>> crw-talk at crwoodturner.com >>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ >> >> >> _________________________________________ >> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >> ______ >> crw-talk mailing list >> crw-talk at crwoodturner.com >> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From rjpatros05 at gmail.com Mon Aug 3 21:38:21 2020 From: rjpatros05 at gmail.com (Robert Patros) Date: Mon, 3 Aug 2020 21:38:21 -0500 Subject: [crw-talk] Bark edge goblet In-Reply-To: <63068B07-5B52-499F-A129-DEAD1567775C@gmail.com> References: <63068B07-5B52-499F-A129-DEAD1567775C@gmail.com> Message-ID: <08D75703-CAFF-4C19-9B4C-B7CDE901CD5E@gmail.com> Very nicely done, Ken. Sent from my iPhone > On Aug 3, 2020, at 9:37 PM, Robert Patros wrote: > > ?I got it. > > Sent from my iPhone > >>> On Aug 3, 2020, at 9:25 PM, Ken Grunke wrote: >>> >> ? >> Does anyone get this with the image? >> >> Thanks, Bob. >> >>> On 8/3/20 9:09 PM, Robert Patros wrote: >>> I didn?t get your posts. I?ve been getting posts without the attachments. >>> >>> Sent from my iPhone >>> >>>> On Aug 3, 2020, at 8:58 PM, Ken Grunke wrote: >>>> >>>> ? >>>> Thanks, John. I was wondering if my 2 posts actually reached the group! >>>> >>>> Ken Grunke >>>> >>>> On 8/3/20 3:44 PM, John & Donna Griffiths wrote: >>>>> Whoa Ken, that is a dandy! Thanks for posting, John >>>>> >>>>> On 8/2/2020 6:30 PM, Ken Grunke wrote: >>>>>> This one I got lucky with. Must have been winter-cut. 5 1/2" tall, 4" across the rim. Finished with wipe-on poly. It's been two years since I turned it, so has had the test of time. >>>>>> >>>>>> >>>>>> >>>>>> _________________________________________ >>>>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >>>>>> ______ >>>>>> crw-talk mailing list >>>>>> crw-talk at crwoodturner.com >>>>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >>>>>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ >>>>> >>>>> >>>>> _________________________________________ >>>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >>>>> ______ >>>>> crw-talk mailing list >>>>> crw-talk at crwoodturner.com >>>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >>>>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ >>>> _________________________________________ >>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >>>> ______ >>>> crw-talk mailing list >>>> crw-talk at crwoodturner.com >>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >>>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ >>> >>> >>> _________________________________________ >>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >>> ______ >>> crw-talk mailing list >>> crw-talk at crwoodturner.com >>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ >> >> _________________________________________ >> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >> ______ >> crw-talk mailing list >> crw-talk at crwoodturner.com >> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From gardens53581 at gmail.com Tue Aug 4 08:22:00 2020 From: gardens53581 at gmail.com (Ken Nancy) Date: Tue, 4 Aug 2020 08:22:00 -0500 Subject: [crw-talk] Bark edge goblet In-Reply-To: <979a54d4-e29d-d5c5-3b0f-02bbeb82b9dc@gmail.com> References: <78f10173-807c-711a-dca2-32408227bdd5@gmail.com> <06903728-13FF-4FB0-BCD5-139E9E1CB7DA@gmail.com> <979a54d4-e29d-d5c5-3b0f-02bbeb82b9dc@gmail.com> Message-ID: got it On Mon, Aug 3, 2020 at 9:25 PM Ken Grunke wrote: > Does anyone get this with the image? > > Thanks, Bob. > On 8/3/20 9:09 PM, Robert Patros wrote: > > I didn?t get your posts. I?ve been getting posts without the attachments. > > Sent from my iPhone > > On Aug 3, 2020, at 8:58 PM, Ken Grunke > wrote: > > ? > > Thanks, John. I was wondering if my 2 posts actually reached the group! > > Ken Grunke > On 8/3/20 3:44 PM, John & Donna Griffiths wrote: > > Whoa Ken, that is a dandy! Thanks for posting, John > On 8/2/2020 6:30 PM, Ken Grunke wrote: > > This one I got lucky with. Must have been winter-cut. 5 1/2" tall, 4" > across the rim. Finished with wipe-on poly. It's been two years since I > turned it, so has had the test of time. > > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing listcrw-talk at crwoodturner.comhttp://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing listcrw-talk at crwoodturner.comhttp://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes > only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: > http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing listcrw-talk at crwoodturner.comhttp://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes > only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: > http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > -------------- next part -------------- An HTML attachment was scrubbed... URL: From wisawdust at charter.net Tue Aug 4 08:25:48 2020 From: wisawdust at charter.net (wisawdust at charter.net) Date: Tue, 04 Aug 2020 13:25:48 +0000 Subject: [crw-talk] Bark edge goblet Message-ID: Ken, I got this image. I did not get the previous image Duane -----------------------------------------From: "Ken Grunke" To: crw-talk at crwoodturner.com Cc: Sent: Monday August 3 2020 9:25:59PM Subject: Re: [crw-talk] Bark edge goblet Does anyone get this with the image? Thanks, Bob. On 8/3/20 9:09 PM, Robert Patros wrote: I didn?t get your posts. I?ve been getting posts without the attachments. Sent from my iPhone On Aug 3, 2020, at 8:58 PM, Ken Grunke [1] wrote: ? Thanks, John. I was wondering if my 2 posts actually reached the group! Ken Grunke On 8/3/20 3:44 PM, John & Donna Griffiths wrote: Whoa Ken, that is a dandy! Thanks for posting, John On 8/2/2020 6:30 PM, Ken Grunke wrote: This one I got lucky with. Must have been winter-cut. 5 1/2" tall, 4" across the rim. Finished with wipe-on poly. It's been two years since I turned it, so has had the test of time. _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com [2] [3]http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com [4] Check the archive to make sure your message was sent: [5]http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ [6] _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com [7] [8]http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com [9] Check the archive to make sure your message was sent: [10]http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ [11] _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com [12] [13]http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com [14] Check the archive to make sure your message was sent: [15]http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ [16] _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com [17] [18]http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com [19] Check the archive to make sure your message was sent: [20]http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ [21] Links: ------ [1] mailto:kengrunke at gmail.com [2] mailto:crw-talk at crwoodturner.com [3] http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com [4] http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com [5] http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ [6] http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ [7] mailto:crw-talk at crwoodturner.com [8] http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com [9] http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com [10] http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ [11] http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ [12] mailto:crw-talk at crwoodturner.com [13] http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com [14] http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com [15] http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ [16] http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ [17] mailto:crw-talk at crwoodturner.com [18] http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com [19] http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com [20] http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ [21] http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From griff at mwt.net Tue Aug 4 09:57:47 2020 From: griff at mwt.net (John & Donna Griffiths) Date: Tue, 4 Aug 2020 09:57:47 -0500 Subject: [crw-talk] Bark edge goblet In-Reply-To: <979a54d4-e29d-d5c5-3b0f-02bbeb82b9dc@gmail.com> References: <78f10173-807c-711a-dca2-32408227bdd5@gmail.com> <06903728-13FF-4FB0-BCD5-139E9E1CB7DA@gmail.com> <979a54d4-e29d-d5c5-3b0f-02bbeb82b9dc@gmail.com> Message-ID: <999272fe-fab2-4ba1-6060-f38412765e07@mwt.net> I have been getting stuff from CRWTalk.? But on the other hand, have I been getting everything?? I have no clue but I seem to have the "normal" amount of club traffic.? Ken, thanks for your work as club webmaster.? John On 8/3/2020 9:25 PM, Ken Grunke wrote: > > Does anyone get this with the image? > > Thanks, Bob. > > On 8/3/20 9:09 PM, Robert Patros wrote: >> I didn?t get your posts. I?ve been getting posts without the >> attachments. >> >> Sent from my iPhone >> >>> On Aug 3, 2020, at 8:58 PM, Ken Grunke wrote: >>> >>> ? >>> >>> Thanks, John. I was wondering if my 2 posts actually reached the group! >>> >>> Ken Grunke >>> >>> On 8/3/20 3:44 PM, John & Donna Griffiths wrote: >>>> >>>> Whoa Ken, that is a dandy!? Thanks for posting, John >>>> >>>> On 8/2/2020 6:30 PM, Ken Grunke wrote: >>>>> This one I got lucky with. Must have been winter-cut. 5 1/2" tall, >>>>> 4" across the rim. Finished with wipe-on poly. It's been two years >>>>> since I turned it, so has had the test of time. >>>>> >>>>> >>>>> _________________________________________ >>>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >>>>> ______ >>>>> crw-talk mailing list >>>>> crw-talk at crwoodturner.com >>>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >>>>> Check the archive to make sure your message was sent:http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ >>>> >>>> _________________________________________ >>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >>>> ______ >>>> crw-talk mailing list >>>> crw-talk at crwoodturner.com >>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >>>> Check the archive to make sure your message was sent:http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ >>> _________________________________________ >>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" >>> goes only to sender. >>> ______ >>> crw-talk mailing list >>> crw-talk at crwoodturner.com >>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >>> Check the archive to make sure your message was sent: >>> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ >> >> _________________________________________ >> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >> ______ >> crw-talk mailing list >> crw-talk at crwoodturner.com >> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >> Check the archive to make sure your message was sent:http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From adrian.novak at charter.net Tue Aug 4 21:13:40 2020 From: adrian.novak at charter.net (Adrian Novak) Date: Tue, 4 Aug 2020 21:13:40 -0500 Subject: [crw-talk] Fwd: Copy of Virtual Shop Tour Saturday July 11 at 10 AM In-Reply-To: Message-ID: Is anyone interested in these forwards? Only reply YES. Begin forwarded message: > > From: RON DIAMOND(rjdiamond46 at gmail.com) > Date: Aug 4, 2020 at 8:50 PM > To: Adrian Novak > Subject: Copy of Virtual Shop Tour Saturday July 11 at 10 AM > > > > > View in your browser (http://BWT.clubexpress.com/content.aspx?page_id=722&club_id=411146&emtid=145398055686&mtid=435940343881&ht=0) > > > > > > > > > > > > > > > > > > > > > > > Badger Woodturning Shop Tour: Dennis Clayton's shop > > > > > Time: Saturday August 15, 2020 10:00 AM Central Time (US and Canada) > > > > Join Zoom Meeting/ shop tour > > > > > > > > > > Join Zoom Meeting > > > > https://us02web.zoom.us/j/4039211370 > > > Meeting ID: 403 921 1370 > > You are invited to tour my shop on Sat Sept 12. If you would be interested in showing us your shop, please give me a call or email. We are actively looking for shops to visit > > > > Reminder: > > Next Tuesday Aug 11 will be the Cyndi Drozda demo. you must go to the web page, sign in as a club member and then register to attend this demo. > > > > Topic: Shop tour of Alex Zabel's shop > > > > Time: Jul 11, 2020 10:00 AM Central Time (US and Canada) > > > > > > > > Join Zoom Meeting > > > > https://us02web.zoom.us/j/4039211370 > > > > > > > > Meeting ID: 403 921 1370 > > > > > > > > > > > > > You have received this message from the mailing list of Badger Woodturners. If you would prefer not to receive these emails in the future, go to the opt-out page (https://BWT.clubexpress.com/content.aspx?page_id=356&club_id=411146&item_id=435940343881) and modify your privacy settings. You can also request to be removed from our database completely. -------------- next part -------------- An HTML attachment was scrubbed... URL: From kengrunke at gmail.com Tue Aug 4 21:45:22 2020 From: kengrunke at gmail.com (Ken Grunke) Date: Tue, 4 Aug 2020 21:45:22 -0500 Subject: [crw-talk] Fwd: Copy of Virtual Shop Tour Saturday July 11 at 10 AM In-Reply-To: References: Message-ID: yes On 8/4/20 9:13 PM, Adrian Novak wrote: > Is anyone interested in these forwards? ?Only reply YES. > > > Begin forwarded message: > >> *From: *RON DIAMOND(rjdiamond46 at gmail.com) >> > >> *Date: *Aug 4, 2020 at 8:50 PM >> *To: *Adrian Novak > > >> *Subject: Copy of Virtual Shop Tour Saturday July 11 at 10 AM* >> >> Badger Woodturners >> View in your browser >> >> ------------------------------------------------------------------------ >> >> >> Badger Woodturning Shop Tour:Dennis Clayton's shop >> >> Time: Saturday August 15, 2020 10:00 AM Central Time (US and Canada) >> >> Join Zoom Meeting/ shop tour >> >> Join Zoom Meeting >> >> https://us02web.zoom.us/j/4039211370 >> >> >> Meeting ID: 403 921 1370 >> >> You are invited to tour my shop on Sat Sept 12.? If you would be >> interested in showing us your shop, please give me a call or email.? >> We are actively looking for shops to visit >> Reminder: >> Next Tuesday Aug 11 will be the Cyndi Drozda demo.? you must go to >> the web page, sign in as a club member and then register to attend >> this demo. >> >> Topic: Shop tour of Alex Zabel's shop >> >> Time: Jul 11, 2020 10:00 AM Central Time (US and Canada) >> >> Join Zoom Meeting >> >> https://us02web.zoom.us/j/4039211370 >> >> Meeting ID: 403 921 1370 >> >> >> ------------------------------------------------------------------------ >> >> You have received this message from the mailing list of Badger >> Woodturners. If you would prefer not to receive these emails in the >> future, go to the opt-out page >> >> and modify your privacy settings. You can also request to be removed >> from our database completely. > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From rjpatros05 at gmail.com Wed Aug 5 07:10:26 2020 From: rjpatros05 at gmail.com (Robert Patros) Date: Wed, 5 Aug 2020 07:10:26 -0500 Subject: [crw-talk] Fwd: Copy of Virtual Shop Tour Saturday July 11 at 10 AM In-Reply-To: References: Message-ID: <8A6A9BA9-DBE3-475E-8459-B430B58383BE@gmail.com> Yes Sent from my iPhone > On Aug 4, 2020, at 9:14 PM, Adrian Novak wrote: > > ? > Is anyone interested in these forwards? Only reply YES. > > > Begin forwarded message: > >> From: RON DIAMOND(rjdiamond46 at gmail.com) >> Date: Aug 4, 2020 at 8:50 PM >> To: Adrian Novak >> Subject: Copy of Virtual Shop Tour Saturday July 11 at 10 AM >> >> View in your browser >> >> >> Badger Woodturning Shop Tour: Dennis Clayton's shop >> >> Time: Saturday August 15, 2020 10:00 AM Central Time (US and Canada) >> >> Join Zoom Meeting/ shop tour >> >> >> >> Join Zoom Meeting >> >> https://us02web.zoom.us/j/4039211370 >> >> >> Meeting ID: 403 921 1370 >> >> You are invited to tour my shop on Sat Sept 12. If you would be interested in showing us your shop, please give me a call or email. We are actively looking for shops to visit >> >> Reminder: >> Next Tuesday Aug 11 will be the Cyndi Drozda demo. you must go to the web page, sign in as a club member and then register to attend this demo. >> Topic: Shop tour of Alex Zabel's shop >> Time: Jul 11, 2020 10:00 AM Central Time (US and Canada) >> >> Join Zoom Meeting >> https://us02web.zoom.us/j/4039211370 >> >> Meeting ID: 403 921 1370 >> >> >> You have received this message from the mailing list of Badger Woodturners. If you would prefer not to receive these emails in the future, go to the opt-out page and modify your privacy settings. You can also request to be removed from our database completely. > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From andrewpingree at gmail.com Wed Aug 5 09:23:32 2020 From: andrewpingree at gmail.com (Andrew) Date: Wed, 5 Aug 2020 09:23:32 -0500 Subject: [crw-talk] Fwd: Copy of Virtual Shop Tour Saturday July 11 at 10 AM In-Reply-To: References:

Message-ID: YES From: crw-talk On Behalf Of Adrian Novak Sent: Tuesday, August 4, 2020 9:14 PM To: CRW-Talk at crwoodturner.com Subject: [crw-talk] Fwd: Copy of Virtual Shop Tour Saturday July 11 at 10 AM CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe. Is anyone interested in these forwards? Only reply YES. Begin forwarded message: From: RON DIAMOND(rjdiamond46 at gmail.com) > Date: Aug 4, 2020 at 8:50 PM To: Adrian Novak > Subject: Copy of Virtual Shop Tour Saturday July 11 at 10 AM View in your browser ________________________________ [https://s3.amazonaws.com/ClubExpressClubFiles/411146/graphics/BWT_2020_banner_1732689439.jpg] Badger Woodturning Shop Tour: Dennis Clayton's shop Time: Saturday August 15, 2020 10:00 AM Central Time (US and Canada) Join Zoom Meeting/ shop tour Join Zoom Meeting https://us02web.zoom.us/j/4039211370 Meeting ID: 403 921 1370 You are invited to tour my shop on Sat Sept 12. If you would be interested in showing us your shop, please give me a call or email. We are actively looking for shops to visit Reminder: Next Tuesday Aug 11 will be the Cyndi Drozda demo. you must go to the web page, sign in as a club member and then register to attend this demo. Topic: Shop tour of Alex Zabel's shop Time: Jul 11, 2020 10:00 AM Central Time (US and Canada) Join Zoom Meeting https://us02web.zoom.us/j/4039211370 Meeting ID: 403 921 1370 ________________________________ You have received this message from the mailing list of Badger Woodturners. If you would prefer not to receive these emails in the future, go to the opt-out page and modify your privacy settings. You can also request to be removed from our database completely. --> -------------- next part -------------- An HTML attachment was scrubbed... URL: From ldsolem at aol.com Wed Aug 5 09:53:31 2020 From: ldsolem at aol.com (ldsolem at aol.com) Date: Wed, 5 Aug 2020 09:53:31 -0500 Subject: [crw-talk] Bark edge goblet In-Reply-To: References: <78f10173-807c-711a-dca2-32408227bdd5@gmail.com> <06903728-13FF-4FB0-BCD5-139E9E1CB7DA@gmail.com> <979a54d4-e29d-d5c5-3b0f-02bbeb82b9dc@gmail.com> Message-ID: <009101d66b38$3003bbe0$900b33a0$@aol.com> I never got the image. Lyle Solem From: crw-talk On Behalf Of Ken Nancy Sent: Tuesday, August 4, 2020 8:22 AM To: Membership mailing list for the AAW Chapter Coulee Region Woodturners. Subject: Re: [crw-talk] Bark edge goblet got it On Mon, Aug 3, 2020 at 9:25 PM Ken Grunke > wrote: Does anyone get this with the image? Thanks, Bob. On 8/3/20 9:09 PM, Robert Patros wrote: I didn?t get your posts. I?ve been getting posts without the attachments. Sent from my iPhone On Aug 3, 2020, at 8:58 PM, Ken Grunke wrote: ? Thanks, John. I was wondering if my 2 posts actually reached the group! Ken Grunke On 8/3/20 3:44 PM, John & Donna Griffiths wrote: Whoa Ken, that is a dandy! Thanks for posting, John On 8/2/2020 6:30 PM, Ken Grunke wrote: This one I got lucky with. Must have been winter-cut. 5 1/2" tall, 4" across the rim. Finished with wipe-on poly. It's been two years since I turned it, so has had the test of time. _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From griff at mwt.net Wed Aug 5 10:00:27 2020 From: griff at mwt.net (Mwt) Date: Wed, 5 Aug 2020 10:00:27 -0500 Subject: [crw-talk] Set 2 of 2, emerging goblet Message-ID: -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_4099.JPG Type: image/jpeg Size: 2576713 bytes Desc: not available URL: -------------- next part -------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_4100.JPG Type: image/jpeg Size: 2392712 bytes Desc: not available URL: -------------- next part -------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_4101.JPG Type: image/jpeg Size: 1211487 bytes Desc: not available URL: -------------- next part -------------- Members, thanks for looking. I was given a pile of freshly cut walnut branches a while ago, and had two choices: let them dry and probably never use them; or make stuff. You all know me well enough that I am sort of addicted to making stuff while awaiting the demise of the virus so... Long story short, one of the last pieces of the walnut branches had a crotch with three limbs growing out of it. So I cut the limbs off and left the part where they branches off. Mounted them on a screw chuck and turned a thin stemmed goblet. Left the stem fairly thick because of the walnut wood pith which would greatly weaken a thinner stem as it is prone to cracking. I hollowed the goblet part almost to the cambium, that can be seen showing through on the inside. I left the screw chuck hole so it would help dry the base as it is a good sized chunk of wet wood I did not want to have split during drying. Several coats of poly and a buff with a shop made grit, mineral oil and beeswax mixture and finished! Thanks for reading, let?s get some comments going. John Sent from my iPhone From rjpatros05 at gmail.com Wed Aug 5 10:19:27 2020 From: rjpatros05 at gmail.com (Robert Patros) Date: Wed, 5 Aug 2020 10:19:27 -0500 Subject: [crw-talk] Set 2 of 2, emerging goblet In-Reply-To: References: Message-ID: <2CEA9905-DB8B-4995-8D50-318DBDC75566@gmail.com> Really cool! Great base! Sent from my iPhone > On Aug 5, 2020, at 10:02 AM, Mwt wrote: > > ? > > > > > > > > > > > > Members, thanks for looking. I was given a pile of freshly cut walnut branches a while ago, and had two choices: let them dry and probably never use them; or make stuff. You all know me well enough that I am sort of addicted to making stuff while awaiting the demise of the virus so... > > Long story short, one of the last pieces of the walnut branches had a crotch with three limbs growing out of it. So I cut the limbs off and left the part where they branches off. Mounted them on a screw chuck and turned a thin stemmed goblet. Left the stem fairly thick because of the walnut wood pith which would greatly weaken a thinner stem as it is prone to cracking. I hollowed the goblet part almost to the cambium, that can be seen showing through on the inside. I left the screw chuck hole so it would help dry the base as it is a good sized chunk of wet wood I did not want to have split during drying. Several coats of poly and a buff with a shop made grit, mineral oil and beeswax mixture and finished! > > Thanks for reading, let?s get some comments going. > > John > Sent from my iPhone_________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ From 15krarupj at gmail.com Wed Aug 5 13:01:32 2020 From: 15krarupj at gmail.com (Jim Krarup) Date: Wed, 5 Aug 2020 13:01:32 -0500 Subject: [crw-talk] Set 2 of 2, emerging goblet In-Reply-To: <2CEA9905-DB8B-4995-8D50-318DBDC75566@gmail.com> References: <2CEA9905-DB8B-4995-8D50-318DBDC75566@gmail.com> Message-ID: Very very nice On Wed, Aug 5, 2020, 10:19 AM Robert Patros wrote: > Really cool! Great base! > > Sent from my iPhone > > > On Aug 5, 2020, at 10:02 AM, Mwt wrote: > > > > ? > > > > > > > > > > > > > > > > > > > > > > > > Members, thanks for looking. I was given a pile of freshly cut walnut > branches a while ago, and had two choices: let them dry and probably never > use them; or make stuff. You all know me well enough that I am sort of > addicted to making stuff while awaiting the demise of the virus so... > > > > Long story short, one of the last pieces of the walnut branches had a > crotch with three limbs growing out of it. So I cut the limbs off and left > the part where they branches off. Mounted them on a screw chuck and turned > a thin stemmed goblet. Left the stem fairly thick because of the walnut > wood pith which would greatly weaken a thinner stem as it is prone to > cracking. I hollowed the goblet part almost to the cambium, that can be > seen showing through on the inside. I left the screw chuck hole so it > would help dry the base as it is a good sized chunk of wet wood I did not > want to have split during drying. Several coats of poly and a buff with a > shop made grit, mineral oil and beeswax mixture and finished! > > > > Thanks for reading, let?s get some comments going. > > > > John > > Sent from my iPhone_________________________________________ > > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" > goes only to sender. > > ______ > > crw-talk mailing list > > crw-talk at crwoodturner.com > > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > > Check the archive to make sure your message was sent: > http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes > only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: > http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > -------------- next part -------------- An HTML attachment was scrubbed... URL: From griff at mwt.net Wed Aug 5 13:08:37 2020 From: griff at mwt.net (John & Donna Griffiths) Date: Wed, 5 Aug 2020 13:08:37 -0500 Subject: [crw-talk] Fwd: Copy of Virtual Shop Tour Saturday July 11 at 10 AM In-Reply-To: References: Message-ID: SATURDAY JULY 11 WAS A MONTH AGO.? Does he mean Saturday Aug 8? John On 8/4/2020 9:13 PM, Adrian Novak wrote: > Is anyone interested in these forwards? ?Only reply YES. > > > Begin forwarded message: > >> *From: *RON DIAMOND(rjdiamond46 at gmail.com) >> > >> *Date: *Aug 4, 2020 at 8:50 PM >> *To: *Adrian Novak > > >> *Subject: Copy of Virtual Shop Tour Saturday July 11 at 10 AM* >> >> Badger Woodturners >> View in your browser >> >> ------------------------------------------------------------------------ >> >> >> Badger Woodturning Shop Tour:Dennis Clayton's shop >> >> Time: Saturday August 15, 2020 10:00 AM Central Time (US and Canada) >> >> Join Zoom Meeting/ shop tour >> >> Join Zoom Meeting >> >> https://us02web.zoom.us/j/4039211370 >> >> >> Meeting ID: 403 921 1370 >> >> You are invited to tour my shop on Sat Sept 12.? If you would be >> interested in showing us your shop, please give me a call or email.? >> We are actively looking for shops to visit >> Reminder: >> Next Tuesday Aug 11 will be the Cyndi Drozda demo.? you must go to >> the web page, sign in as a club member and then register to attend >> this demo. >> >> Topic: Shop tour of Alex Zabel's shop >> >> Time: Jul 11, 2020 10:00 AM Central Time (US and Canada) >> >> Join Zoom Meeting >> >> https://us02web.zoom.us/j/4039211370 >> >> Meeting ID: 403 921 1370 >> >> >> ------------------------------------------------------------------------ >> >> You have received this message from the mailing list of Badger >> Woodturners. If you would prefer not to receive these emails in the >> future, go to the opt-out page >> >> and modify your privacy settings. You can also request to be removed >> from our database completely. > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From griff at mwt.net Wed Aug 5 13:10:01 2020 From: griff at mwt.net (John & Donna Griffiths) Date: Wed, 5 Aug 2020 13:10:01 -0500 Subject: [crw-talk] Fwd: Copy of Virtual Shop Tour Saturday July 11 at 10 AM In-Reply-To: References: Message-ID: I stand corrected, it is a week from this Saturday.? Sorry for sowing confusion, John On 8/4/2020 9:13 PM, Adrian Novak wrote: > Is anyone interested in these forwards? ?Only reply YES. > > > Begin forwarded message: > >> *From: *RON DIAMOND(rjdiamond46 at gmail.com) >> > >> *Date: *Aug 4, 2020 at 8:50 PM >> *To: *Adrian Novak > > >> *Subject: Copy of Virtual Shop Tour Saturday July 11 at 10 AM* >> >> Badger Woodturners >> View in your browser >> >> ------------------------------------------------------------------------ >> >> >> Badger Woodturning Shop Tour:Dennis Clayton's shop >> >> Time: Saturday August 15, 2020 10:00 AM Central Time (US and Canada) >> >> Join Zoom Meeting/ shop tour >> >> Join Zoom Meeting >> >> https://us02web.zoom.us/j/4039211370 >> >> >> Meeting ID: 403 921 1370 >> >> You are invited to tour my shop on Sat Sept 12.? If you would be >> interested in showing us your shop, please give me a call or email.? >> We are actively looking for shops to visit >> Reminder: >> Next Tuesday Aug 11 will be the Cyndi Drozda demo.? you must go to >> the web page, sign in as a club member and then register to attend >> this demo. >> >> Topic: Shop tour of Alex Zabel's shop >> >> Time: Jul 11, 2020 10:00 AM Central Time (US and Canada) >> >> Join Zoom Meeting >> >> https://us02web.zoom.us/j/4039211370 >> >> Meeting ID: 403 921 1370 >> >> >> ------------------------------------------------------------------------ >> >> You have received this message from the mailing list of Badger >> Woodturners. If you would prefer not to receive these emails in the >> future, go to the opt-out page >> >> and modify your privacy settings. You can also request to be removed >> from our database completely. > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From 15krarupj at gmail.com Wed Aug 5 13:10:58 2020 From: 15krarupj at gmail.com (Jim Krarup) Date: Wed, 5 Aug 2020 13:10:58 -0500 Subject: [crw-talk] Fwd: Copy of Virtual Shop Tour Saturday July 11 at 10 AM In-Reply-To: References:

Message-ID: Yes On Wed, Aug 5, 2020, 1:09 PM John & Donna Griffiths wrote: > SATURDAY JULY 11 WAS A MONTH AGO. Does he mean Saturday Aug 8? John > On 8/4/2020 9:13 PM, Adrian Novak wrote: > > Is anyone interested in these forwards? Only reply YES. > > > Begin forwarded message: > > *From: *RON DIAMOND(rjdiamond46 at gmail.com) > *Date: *Aug 4, 2020 at 8:50 PM > *To: *Adrian Novak > *Subject: Copy of Virtual Shop Tour Saturday July 11 at 10 AM* > > View in your browser > > ------------------------------ > > Badger Woodturning Shop Tour: Dennis Clayton's shop > > Time: Saturday August 15, 2020 10:00 AM Central Time (US and Canada) > > Join Zoom Meeting/ shop tour > > > > Join Zoom Meeting > > https://us02web.zoom.us/j/4039211370 > > Meeting ID: 403 921 1370 > > You are invited to tour my shop on Sat Sept 12. If you would be > interested in showing us your shop, please give me a call or email. We are > actively looking for shops to visit > > Reminder: > Next Tuesday Aug 11 will be the Cyndi Drozda demo. you must go to the web > page, sign in as a club member and then register to attend this demo. > > Topic: Shop tour of Alex Zabel's shop > > Time: Jul 11, 2020 10:00 AM Central Time (US and Canada) > > > > Join Zoom Meeting > > https://us02web.zoom.us/j/4039211370 > > > > Meeting ID: 403 921 1370 > > ------------------------------ > > You have received this message from the mailing list of Badger > Woodturners. If you would prefer not to receive these emails in the future, > go to the opt-out page > > and modify your privacy settings. You can also request to be removed from > our database completely. > > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing listcrw-talk at crwoodturner.comhttp://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes > only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: > http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > -------------- next part -------------- An HTML attachment was scrubbed... URL: From jdwilson at acegroup.cc Wed Aug 5 13:14:55 2020 From: jdwilson at acegroup.cc (jdwilson) Date: Wed, 05 Aug 2020 13:14:55 -0500 Subject: [crw-talk] Fwd: Copy of Virtual Shop Tour Saturday July 11 at 10 AM In-Reply-To: Message-ID: b061af8307310d3299e8232f263f12a6 YESSent from my Verizon, Samsung Galaxy smartphone -------- Original message --------From: Jim Krarup <15krarupj at gmail.com> Date: 8/5/20 1:11 PM (GMT-06:00) To: "Membership mailing list for the AAW Chapter Coulee Region Woodturners." Subject: Re: [crw-talk] Fwd: Copy of Virtual Shop Tour Saturday July 11 at 10 AM YesOn Wed, Aug 5, 2020, 1:09 PM John & Donna Griffiths wrote: SATURDAY JULY 11 WAS A MONTH AGO.? Does he mean Saturday Aug 8?? John On 8/4/2020 9:13 PM, Adrian Novak wrote: Is anyone interested in these forwards? ?Only reply YES.? Begin forwarded message: From: RON DIAMOND(rjdiamond46 at gmail.com) Date: Aug 4, 2020 at 8:50 PM To: Adrian Novak Subject: Copy of Virtual Shop Tour Saturday July 11 at 10 AM View in your browser Badger Woodturning Shop Tour:? Dennis Clayton's shop Time: Saturday August 15, 2020 10:00 AM Central Time (US and Canada) Join Zoom Meeting/ shop tour ? Join Zoom Meeting https://us02web.zoom.us/j/4039211370 Meeting ID: 403 921 1370 You are invited to tour my shop on Sat Sept 12.? If you would be interested in showing us your shop, please give me a call or email.? We are actively looking for shops to visit ? Reminder: Next Tuesday Aug 11 will be the Cyndi Drozda demo.? you must go to the web page, sign in as a club member and then register to attend this demo. Topic: Shop tour of Alex Zabel's shop Time: Jul 11, 2020 10:00 AM Central Time (US and Canada) ? Join Zoom Meeting https://us02web.zoom.us/j/4039211370 ? Meeting ID: 403 921 1370 You have received this message from the mailing list of Badger Woodturners. If you would prefer not to receive these emails in the future, go to the opt-out page and modify your privacy settings. You can also request to be removed from our database completely. _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From marine9096 at gmail.com Wed Aug 5 18:36:19 2020 From: marine9096 at gmail.com (James Bloomer) Date: Wed, 5 Aug 2020 18:36:19 -0500 Subject: [crw-talk] Fwd: Copy of Virtual Shop Tour Saturday July 11 at 10 AM In-Reply-To: References:

Message-ID: Yes On Tue, Aug 4, 2020, 21:14 Adrian Novak wrote: > Is anyone interested in these forwards? Only reply YES. > > > Begin forwarded message: > > *From: *RON DIAMOND(rjdiamond46 at gmail.com) > *Date: *Aug 4, 2020 at 8:50 PM > *To: *Adrian Novak > *Subject: Copy of Virtual Shop Tour Saturday July 11 at 10 AM* > > View in your browser > > ------------------------------ > > Badger Woodturning Shop Tour: Dennis Clayton's shop > > Time: Saturday August 15, 2020 10:00 AM Central Time (US and Canada) > > Join Zoom Meeting/ shop tour > > > > Join Zoom Meeting > > https://us02web.zoom.us/j/4039211370 > > Meeting ID: 403 921 1370 > > You are invited to tour my shop on Sat Sept 12. If you would be > interested in showing us your shop, please give me a call or email. We are > actively looking for shops to visit > > Reminder: > Next Tuesday Aug 11 will be the Cyndi Drozda demo. you must go to the web > page, sign in as a club member and then register to attend this demo. > > Topic: Shop tour of Alex Zabel's shop > > Time: Jul 11, 2020 10:00 AM Central Time (US and Canada) > > > > Join Zoom Meeting > > https://us02web.zoom.us/j/4039211370 > > > > Meeting ID: 403 921 1370 > > ------------------------------ > > You have received this message from the mailing list of Badger > Woodturners. If you would prefer not to receive these emails in the future, > go to the opt-out page > > and modify your privacy settings. You can also request to be removed from > our database completely. > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes > only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: > http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > -------------- next part -------------- An HTML attachment was scrubbed... URL: From aaronagesicki at gmail.com Thu Aug 6 08:08:48 2020 From: aaronagesicki at gmail.com (Aaron Gesicki) Date: Thu, 6 Aug 2020 08:08:48 -0500 Subject: [crw-talk] Retrospective Message-ID: It's been a struggle getting back to making something new, although Bob Patros is providing some incentive. So, like John Jordan recently, here's something old that only a few of you may remember seeing. [image: PB190039.JPG] [image: Manitoba Maple 8-inch.jpg] [image: Segmented 10-inch.jpg] -- *Aaron Gesicki* Winona, MN 303.551.2450 cell 507.615.0233 home -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Manitoba Maple 8-inch.jpg Type: image/jpeg Size: 539562 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: PB190039.JPG Type: image/jpeg Size: 510388 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Segmented 10-inch.jpg Type: image/jpeg Size: 605875 bytes Desc: not available URL: From griff at mwt.net Thu Aug 6 08:29:14 2020 From: griff at mwt.net (John & Donna Griffiths) Date: Thu, 6 Aug 2020 08:29:14 -0500 Subject: [crw-talk] Fwd: Copy of Virtual Shop Tour Saturday July 11 at 10 AM In-Reply-To: References:

Message-ID: Yes On 8/5/2020 1:08 PM, John & Donna Griffiths wrote: > > SATURDAY JULY 11 WAS A MONTH AGO.? Does he mean Saturday Aug 8?? John > > On 8/4/2020 9:13 PM, Adrian Novak wrote: >> Is anyone interested in these forwards? ?Only reply YES. >> >> >> Begin forwarded message: >> >>> *From: *RON DIAMOND(rjdiamond46 at gmail.com) >>> > >>> *Date: *Aug 4, 2020 at 8:50 PM >>> *To: *Adrian Novak >> > >>> *Subject: Copy of Virtual Shop Tour Saturday July 11 at 10 AM* >>> >>> Badger Woodturners >>> View in your browser >>> >>> ------------------------------------------------------------------------ >>> >>> >>> Badger Woodturning Shop Tour:Dennis Clayton's shop >>> >>> Time: Saturday August 15, 2020 10:00 AM Central Time (US and Canada) >>> >>> Join Zoom Meeting/ shop tour >>> >>> Join Zoom Meeting >>> >>> https://us02web.zoom.us/j/4039211370 >>> >>> >>> Meeting ID: 403 921 1370 >>> >>> You are invited to tour my shop on Sat Sept 12.? If you would be >>> interested in showing us your shop, please give me a call or email.? >>> We are actively looking for shops to visit >>> Reminder: >>> Next Tuesday Aug 11 will be the Cyndi Drozda demo.? you must go to >>> the web page, sign in as a club member and then register to attend >>> this demo. >>> >>> Topic: Shop tour of Alex Zabel's shop >>> >>> Time: Jul 11, 2020 10:00 AM Central Time (US and Canada) >>> >>> Join Zoom Meeting >>> >>> https://us02web.zoom.us/j/4039211370 >>> >>> Meeting ID: 403 921 1370 >>> >>> >>> ------------------------------------------------------------------------ >>> >>> You have received this message from the mailing list of Badger >>> Woodturners. If you would prefer not to receive these emails in the >>> future, go to the opt-out page >>> >>> and modify your privacy settings. You can also request to be removed >>> from our database completely. >> >> _________________________________________ >> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >> ______ >> crw-talk mailing list >> crw-talk at crwoodturner.com >> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >> Check the archive to make sure your message was sent:http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From griff at mwt.net Thu Aug 6 08:33:08 2020 From: griff at mwt.net (John & Donna Griffiths) Date: Thu, 6 Aug 2020 08:33:08 -0500 Subject: [crw-talk] Retrospective In-Reply-To: References: Message-ID: <1b6e0e74-27e6-d94b-67ca-7ec81803fb79@mwt.net> All very nice pieces.? All appear to be turned very thin.? The segmented bowl is especially nice, thanks for sharing.? John On 8/6/2020 8:08 AM, Aaron Gesicki wrote: > It's been a struggle getting back to making something new, although > Bob Patros is providing some incentive. > So, like John Jordan recently, here's something old that only a few of > you may remember seeing. > > PB190039.JPG > Manitoba Maple 8-inch.jpg > Segmented 10-inch.jpg > > -- > *Aaron Gesicki* > Winona, MN > 303.551.2450 cell > 507.615.0233 home > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: PB190039.JPG Type: image/jpeg Size: 510388 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Manitoba Maple 8-inch.jpg Type: image/jpeg Size: 539562 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Segmented 10-inch.jpg Type: image/jpeg Size: 605875 bytes Desc: not available URL: From rjpatros05 at gmail.com Thu Aug 6 09:26:25 2020 From: rjpatros05 at gmail.com (Robert Patros) Date: Thu, 6 Aug 2020 09:26:25 -0500 Subject: [crw-talk] Retrospective In-Reply-To: References: Message-ID: Great display, Aaron. The square bowl and natural edge stock was prepared with almost perfect symmetry. The segmental piece is gorgeous! Well done! Sent from my iPhone > On Aug 6, 2020, at 8:08 AM, Aaron Gesicki wrote: > > ? > It's been a struggle getting back to making something new, although Bob Patros is providing some incentive. > So, like John Jordan recently, here's something old that only a few of you may remember seeing. > > > > > > > -- > > Aaron Gesicki > > Winona, MN > 303.551.2450 cell > 507.615.0233 home > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From aaronagesicki at gmail.com Thu Aug 6 11:45:35 2020 From: aaronagesicki at gmail.com (Aaron Gesicki) Date: Thu, 6 Aug 2020 11:45:35 -0500 Subject: [crw-talk] Retrospective In-Reply-To: References:

Message-ID: Those of you who know me have heard this before - sort of like Thomas Edison - I don't need more inspiration, I need more perspiration. On Thu, Aug 6, 2020 at 9:27 AM Robert Patros wrote: > Great display, Aaron. The square bowl and natural edge stock was prepared > with almost perfect symmetry. The segmental piece is gorgeous! Well done! > > Sent from my iPhone > > On Aug 6, 2020, at 8:08 AM, Aaron Gesicki wrote: > > ? > It's been a struggle getting back to making something new, although Bob > Patros is providing some incentive. > So, like John Jordan recently, here's something old that only a few of you > may remember seeing. > > > > > > > -- > > *Aaron Gesicki* > > Winona, MN > 303.551.2450 cell > 507.615.0233 home > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes > only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: > http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes > only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: > http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > -- *Aaron Gesicki* Winona, MN 303.551.2450 cell 507.615.0233 home -------------- next part -------------- An HTML attachment was scrubbed... URL: From kvcritz at gmail.com Thu Aug 6 11:51:54 2020 From: kvcritz at gmail.com (Ken Critzman) Date: Thu, 6 Aug 2020 11:51:54 -0500 Subject: [crw-talk] Fwd: Copy of Virtual Shop Tour Saturday July 11 at 10 AM In-Reply-To: References:

Message-ID: Yes On Tue, Aug 4, 2020, 9:14 PM Adrian Novak wrote: > Is anyone interested in these forwards? Only reply YES. > > > Begin forwarded message: > > *From: *RON DIAMOND(rjdiamond46 at gmail.com) > *Date: *Aug 4, 2020 at 8:50 PM > *To: *Adrian Novak > *Subject: Copy of Virtual Shop Tour Saturday July 11 at 10 AM* > > View in your browser > > ------------------------------ > > Badger Woodturning Shop Tour: Dennis Clayton's shop > > Time: Saturday August 15, 2020 10:00 AM Central Time (US and Canada) > > Join Zoom Meeting/ shop tour > > > > Join Zoom Meeting > > https://us02web.zoom.us/j/4039211370 > > Meeting ID: 403 921 1370 > > You are invited to tour my shop on Sat Sept 12. If you would be > interested in showing us your shop, please give me a call or email. We are > actively looking for shops to visit > > Reminder: > Next Tuesday Aug 11 will be the Cyndi Drozda demo. you must go to the web > page, sign in as a club member and then register to attend this demo. > > Topic: Shop tour of Alex Zabel's shop > > Time: Jul 11, 2020 10:00 AM Central Time (US and Canada) > > > > Join Zoom Meeting > > https://us02web.zoom.us/j/4039211370 > > > > Meeting ID: 403 921 1370 > > ------------------------------ > > You have received this message from the mailing list of Badger > Woodturners. If you would prefer not to receive these emails in the future, > go to the opt-out page > > and modify your privacy settings. You can also request to be removed from > our database completely. > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes > only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: > http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > -------------- next part -------------- An HTML attachment was scrubbed... URL: From varum527 at hotmail.com Fri Aug 7 21:34:53 2020 From: varum527 at hotmail.com (Virginia Green) Date: Fri, 7 Aug 2020 21:34:53 -0500 Subject: [crw-talk] Bark edge goblet In-Reply-To: Message-ID: I thought it was just me. I have gotten very few images these past few month. Virginia > > On Aug 4, 2020 at 8:28 AM, wrote: > > > > Ken, I got this image. I did not get the previous image > > > Duane > > > > > ----------------------------------------- > > From: "Ken Grunke" > To: crw-talk at crwoodturner.com > Cc: > Sent: Monday August 3 2020 9:25:59PM > Subject: Re: [crw-talk] Bark edge goblet > > > > Does anyone get this with the image? > > > > Thanks, Bob. > > > > On 8/3/20 9:09 PM, Robert Patros wrote: > > > I didn?t get your posts. I?ve been getting posts without the attachments. > > > > > > Sent from my iPhone > > > > > > > > > On Aug 3, 2020, at 8:58 PM, Ken Grunke (mailto:kengrunke at gmail.com) wrote: > > > > > > > > > > > ? > > > > > > Thanks, John. I was wondering if my 2 posts actually reached the group! > > > > > > > > > > > > Ken Grunke > > > > > > > > > > > > On 8/3/20 3:44 PM, John & Donna Griffiths wrote: > > > > > > > > > > > > > > > Whoa Ken, that is a dandy! Thanks for posting, John > > > > > > > > > > > > > > > > On 8/2/2020 6:30 PM, Ken Grunke wrote: > > > > > > > > > This one I got lucky with. Must have been winter-cut. 5 1/2" tall, 4" across the rim. Finished with wipe-on poly. It's been two years since I turned it, so has had the test of time. > > > > > > > > > > > > > > > > > > > > _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com (mailto:crw-talk at crwoodturner.com) http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > > > > > > > > > > > > > > > > _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com (mailto:crw-talk at crwoodturner.com) http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > > > > > > _________________________________________ > > > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > > > ______ > > > crw-talk mailing list > > > crw-talk at crwoodturner.com (mailto:crw-talk at crwoodturner.com) > > > (http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com)http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > > > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > > > > > > > _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com (mailto:crw-talk at crwoodturner.com) http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: From adrian.novak at charter.net Sat Aug 8 08:59:38 2020 From: adrian.novak at charter.net (Adrian) Date: Sat, 8 Aug 2020 08:59:38 -0500 Subject: [crw-talk] FW: Cindy Drozda Reminder In-Reply-To: References: Message-ID: Sent from Mail for Windows 10 From: Roger T Becker(rogertbecker at gmail.com) Sent: Saturday, August 8, 2020 8:40 AM To: adrian.novak at charter.net Subject: Cindy Drozda Reminder View in your browser It's not too late to sign up for the Cindy Drozda virtual demo on "Fabulous Finials" this next Tuesday. Only $10 registration. Don't miss this opportunity for a great learning experience from a pro. Instructions are below. ? Roger Becker, BWT President You have received this message from the mailing list of Badger Woodturners. If you would prefer not to receive these emails in the future, go to the opt-out page and modify your privacy settings. You can also request to be removed from our database completely. -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 19B560F9291C4F94A42A32AADCF2519B.png Type: image/png Size: 140 bytes Desc: not available URL: From griff at mwt.net Sat Aug 8 11:39:34 2020 From: griff at mwt.net (John & Donna Griffiths) Date: Sat, 8 Aug 2020 11:39:34 -0500 Subject: [crw-talk] Huge silver maple Message-ID: <0dd95bcd-19c6-d586-a771-20736f5db2fb@mwt.net> Members, We? have a humongous SILVER MAPLE tree in our yard that requires some surgery which will be performed by a tree surgeon either Thursday or Friday, August 13 or 14.? A few branches overhanging our garage and another one growing into a different tree will be taken down.? (That is a high falutin' way to say it will be trimmed by a guy with a chainsaw in a bucket).? It will be trimmed into manageable chunks so as to not damage our garage on the way down, and so should be easy for you to cart off.? It is live and growing so if you have a passion to turn green wood...you know what to do.? You might bring a chainsaw if you come up here, I have an electric one with a 10" bar.? Not asking you to buck up the whole thing, just to nip off what you want.? Lots of stuff in the 5" to 10" diameter range, I suspect. I have enough wood on hand for my own use to last well into my reincarnation, should I be so fortunate to come back as a woodturner, not a Border Collie or perhaps a Siamese cat; so I am giving woodturners first dibs.? Free, but if you take some kindly make a donation to the club next meeting whenever we meet again, honor system.? Whatever is not claimed by club members will be offered to neighbors for firewood after having been picked over by turners Lots of incredible bowls and hollow forms growing here so take a road trip, find a piece or three that suits your creative instincts and maybe bring what you make to the next Instant Gallery. Contact me to make plans to grab your piece of green treasure. John From wisawdust at charter.net Mon Aug 10 09:59:06 2020 From: wisawdust at charter.net (wisawdust at charter.net) Date: Mon, 10 Aug 2020 14:59:06 +0000 Subject: [crw-talk] Update on Jim Frank Message-ID: I was with Jim on Saturday morning. He was having trouble with his leg again. They took him to the hospital and he was admitted. It appears he has the infection back again in his leg. I talked with him yesterday and he sounded much better. He said they were going to keep him there for 3-4 days. He is in room 4859 at Gundersen. His phone number is 608-775-0790. That is the phone in his room. he would love to get calls. Duane -------------- next part -------------- An HTML attachment was scrubbed... URL: From roland.williams507 at gmail.com Mon Aug 10 11:30:52 2020 From: roland.williams507 at gmail.com (Roland Williams) Date: Mon, 10 Aug 2020 10:30:52 -0600 Subject: [crw-talk] Fwd: Copy of Virtual Shop Tour Saturday July 11 at 10 AM In-Reply-To: References: Message-ID: <2537DCA2-70FC-44A8-8915-C334AAEB96F7@gmail.com> Please remove me from your mailing list. I live in Idaho Sent from my iPhone > On Aug 4, 2020, at 8:45 PM, Ken Grunke wrote: > > ? > yes > >> On 8/4/20 9:13 PM, Adrian Novak wrote: >> Is anyone interested in these forwards? Only reply YES. >> >> >> Begin forwarded message: >> >>> From: RON DIAMOND(rjdiamond46 at gmail.com) >>> Date: Aug 4, 2020 at 8:50 PM >>> To: Adrian Novak >>> Subject: Copy of Virtual Shop Tour Saturday July 11 at 10 AM >>> >>> View in your browser >>> >>> >>> Badger Woodturning Shop Tour: Dennis Clayton's shop >>> >>> Time: Saturday August 15, 2020 10:00 AM Central Time (US and Canada) >>> >>> Join Zoom Meeting/ shop tour >>> >>> >>> >>> Join Zoom Meeting >>> >>> https://us02web.zoom.us/j/4039211370 >>> >>> >>> Meeting ID: 403 921 1370 >>> >>> You are invited to tour my shop on Sat Sept 12. If you would be interested in showing us your shop, please give me a call or email. We are actively looking for shops to visit >>> >>> Reminder: >>> Next Tuesday Aug 11 will be the Cyndi Drozda demo. you must go to the web page, sign in as a club member and then register to attend this demo. >>> Topic: Shop tour of Alex Zabel's shop >>> Time: Jul 11, 2020 10:00 AM Central Time (US and Canada) >>> >>> Join Zoom Meeting >>> https://us02web.zoom.us/j/4039211370 >>> >>> Meeting ID: 403 921 1370 >>> >>> >>> You have received this message from the mailing list of Badger Woodturners. If you would prefer not to receive these emails in the future, go to the opt-out page and modify your privacy settings. You can also request to be removed from our database completely. >> >> >> _________________________________________ >> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. >> ______ >> crw-talk mailing list >> crw-talk at crwoodturner.com >> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com >> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From adrian.novak at charter.net Wed Aug 12 07:04:51 2020 From: adrian.novak at charter.net (Adrian Novak) Date: Wed, 12 Aug 2020 07:04:51 -0500 Subject: [crw-talk] Fwd: Copy of Virtual Shop Tour Saturday July 11 at 10 AM In-Reply-To: Message-ID: <0d21f6f8-90a4-4fb5-94c5-b02afa1cfc23@Adrians-iPhone> Begin forwarded message: > > From: RON DIAMOND(rjdiamond46 at gmail.com) > Date: Aug 12, 2020 at 12:40 AM > To: Adrian Novak > Subject: Copy of Virtual Shop Tour Saturday July 11 at 10 AM > > > > > View in your browser (http://BWT.clubexpress.com/content.aspx?page_id=722&club_id=411146&emtid=145397963047&mtid=435940343881&ht=0) > > > > > > > > > > > > > > > > > > > > > > > Badger Woodturning Shop Tour: Dennis Clayton's shop > > > > > Time: Saturday August 15, 2020 10:00 AM Central Time (US and Canada) > > > > Join Zoom Meeting/ shop tour > > > > > https://us02web.zoom.us/j/4039211370 > > > > Meeting ID: 403 921 1370 > > > > > > We will be touring Ron Diamond's shop on Saturday Sept 12. If you would be willing to show us your shop, please give me a call or email. We are actively looking for other shops to tour, big ones and small ones. > > > > > Topic: Shop tour of Alex Zabel's shop > > > > Time: Jul 11, 2020 10:00 AM Central Time (US and Canada) > > > > > > > > Join Zoom Meeting > > > > https://us02web.zoom.us/j/4039211370 > > > > > > > > Meeting ID: 403 921 1370 > > > > > > > > > > > > > You have received this message from the mailing list of Badger Woodturners. If you would prefer not to receive these emails in the future, go to the opt-out page (https://BWT.clubexpress.com/content.aspx?page_id=356&club_id=411146&item_id=435940343881) and modify your privacy settings. You can also request to be removed from our database completely. -------------- next part -------------- An HTML attachment was scrubbed... URL: From wisawdust at charter.net Wed Aug 12 07:36:08 2020 From: wisawdust at charter.net (wisawdust at charter.net) Date: Wed, 12 Aug 2020 12:36:08 +0000 Subject: [crw-talk] Special Non-Woodturning Video Message-ID: Safe Electricity organization has just put out a video called "License To Live" about what to do if you happen to strike a power pole and there are power lines down. I have seen it and it is an excellent video. It can be seen at https://safeelectricity.org/license-to-live/. Thought it might be worth for you to take a look. This was also previewed in this month's Wi REC News. Duane -------------- next part -------------- An HTML attachment was scrubbed... URL: From griff at mwt.net Fri Aug 14 09:36:46 2020 From: griff at mwt.net (John & Donna Griffiths) Date: Fri, 14 Aug 2020 09:36:46 -0500 Subject: [crw-talk] Postponing silver maple pickup Message-ID: <8a1ecd09-99c3-98cc-de61-d9e0628fcbad@mwt.net> Members, I wrote last week we would be having some silver maple wood for pick up this weekend.? That has been postponed as the tree guy won't be here until mid week. I anticipate the wood will be available next weekend, pick up all you need for a voluntary donation to the club.? Will keep everyone updated. John From adrian.novak at charter.net Fri Aug 14 11:11:33 2020 From: adrian.novak at charter.net (Adrian Novak) Date: Fri, 14 Aug 2020 11:11:33 -0500 Subject: [crw-talk] Fwd: Reminder of Virtual Shop Tour Saturday August 15 at 10 AM In-Reply-To: Message-ID: <1de5ab85-5f81-4b8d-bba3-70ebacb1a583@iPhone> Begin forwarded message: > > From: RON DIAMOND(rjdiamond46 at gmail.com) > Date: Aug 14, 2020 at 9:20 AM > To: Adrian Novak > Subject: Reminder of Virtual Shop Tour Saturday August 15 at 10 AM > > > > > View in your browser (http://BWT.clubexpress.com/content.aspx?page_id=722&club_id=411146&emtid=146100665467&mtid=435940343881&ht=0) > > > > > > > > > > > > > > > > > > > > > > > Badger Woodturning Shop Tour: Dennis Clayton's shop > > > > > Time: Saturday August 15, 2020 10:00 AM Central Time (US and Canada) > > > > Join Zoom Meeting/ shop tour > > > > > > > > > > Join Zoom Meeting > > > > https://us02web.zoom.us/j/4039211370 > > > Meeting ID: 403 921 1370 > > You are invited to tour my shop on Sat Sept 12. If you would be interested in showing us your shop, please give me a call or email. We are actively looking for new shops to visit > > > > > > Topic: Shop tour of Alex Zabel's shop > > > > Time: Jul 11, 2020 10:00 AM Central Time (US and Canada) > > > > > > > > Join Zoom Meeting > > > > https://us02web.zoom.us/j/4039211370 > > > > > > > > Meeting ID: 403 921 1370 > > > > > > > > > > > > > You have received this message from the mailing list of Badger Woodturners. If you would prefer not to receive these emails in the future, go to the opt-out page (https://BWT.clubexpress.com/content.aspx?page_id=356&club_id=411146&item_id=435940343881) and modify your privacy settings. You can also request to be removed from our database completely. -------------- next part -------------- An HTML attachment was scrubbed... URL: From rjpatros05 at gmail.com Sat Aug 15 21:47:44 2020 From: rjpatros05 at gmail.com (Robert Patros) Date: Sat, 15 Aug 2020 21:47:44 -0500 Subject: [crw-talk] Gift for my daughter Message-ID: <6F4F4C8C-41B1-4DF7-A942-920314822312@gmail.com> This piece started out to be 1/3 on top with a 2/3 bottom. Because I didn?t like how it looked, I changed the shape and dimensions. The top produced a small hole I didn?t notice at the time so I put a finial on it. I had turned the finial about 10 years ago. The finish is Minwax Antique Oil and it?s buffed. Hope my daughter likes it. Really enjoying seeing others? work online. Please keep posting. Just another way to stay in touch. All the best! -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_4701.jpg Type: image/jpeg Size: 968411 bytes Desc: not available URL: -------------- next part -------------- -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_4702.jpg Type: image/jpeg Size: 1123490 bytes Desc: not available URL: -------------- next part -------------- Sent from my iPhone From jdwilson at acegroup.cc Sun Aug 16 05:48:04 2020 From: jdwilson at acegroup.cc (jdwilson) Date: Sun, 16 Aug 2020 05:48:04 -0500 Subject: [crw-talk] Gift for my daughter In-Reply-To: <6F4F4C8C-41B1-4DF7-A942-920314822312@gmail.com> Message-ID: 4cf5ae57ffa80c0aa03d825f21a806b7 Nice shape and beautiful finish.? Looks like it feels good to hold.? Thanks for showing it to us.Sent from my Verizon, Samsung Galaxy smartphone -------- Original message --------From: Robert Patros Date: 8/15/20 9:48 PM (GMT-06:00) To: crw-talk at crwoodturner.com Subject: [crw-talk] Gift for my daughter This piece started out to be 1/3 on top with a 2/3 bottom. Because I didn?t like how it looked, I changed the shape and dimensions. The top produced a small hole I didn?t notice at the time so I put a finial on it. I had turned the finial about 10 years ago. The finish is Minwax Antique Oil and it?s buffed. Hope my daughter likes it. Really enjoying seeing others? work online. Please keep posting. Just another way to stay in touch.All the best! -------------- next part -------------- An HTML attachment was scrubbed... URL: From rjpatros05 at gmail.com Sun Aug 16 07:16:45 2020 From: rjpatros05 at gmail.com (Robert Patros) Date: Sun, 16 Aug 2020 07:16:45 -0500 Subject: [crw-talk] Gift for my daughter In-Reply-To: <5f390f01.1c69fb81.f1846.3553SMTPIN_ADDED_BROKEN@mx.google.com> References: <5f390f01.1c69fb81.f1846.3553SMTPIN_ADDED_BROKEN@mx.google.com> Message-ID: Thank you. Sent from my iPhone > On Aug 16, 2020, at 5:48 AM, jdwilson wrote: > > ? > Nice shape and beautiful finish. Looks like it feels good to hold. Thanks for showing it to us. > > > > Sent from my Verizon, Samsung Galaxy smartphone > > > -------- Original message -------- > From: Robert Patros > Date: 8/15/20 9:48 PM (GMT-06:00) > To: crw-talk at crwoodturner.com > Subject: [crw-talk] Gift for my daughter > > This piece started out to be 1/3 on top with a 2/3 bottom. Because I didn?t like how it looked, I changed the shape and dimensions. The top produced a small hole I didn?t notice at the time so I put a finial on it. I had turned the finial about 10 years ago. The finish is Minwax Antique Oil and it?s buffed. Hope my daughter likes it. > Really enjoying seeing others? work online. Please keep posting. Just another way to stay in touch. > All the best! > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From wisawdust at charter.net Sun Aug 16 07:42:08 2020 From: wisawdust at charter.net (wisawdust at charter.net) Date: Sun, 16 Aug 2020 12:42:08 +0000 Subject: [crw-talk] Gift for my daughter Message-ID: Nice!!!! Duane -----------------------------------------From: "Robert Patros" To: crw-talk at crwoodturner.com Cc: Sent: Saturday August 15 2020 9:48:16PM Subject: [crw-talk] Gift for my daughter This piece started out to be 1/3 on top with a 2/3 bottom. Because I didn?t like how it looked, I changed the shape and dimensions. The top produced a small hole I didn?t notice at the time so I put a finial on it. I had turned the finial about 10 years ago. The finish is Minwax Antique Oil and it?s buffed. Hope my daughter likes it. Really enjoying seeing others? work online. Please keep posting. Just another way to stay in touch. All the best! -------------- next part -------------- An HTML attachment was scrubbed... URL: From rjpatros05 at gmail.com Sun Aug 16 07:49:01 2020 From: rjpatros05 at gmail.com (Robert Patros) Date: Sun, 16 Aug 2020 07:49:01 -0500 Subject: [crw-talk] Gift for my daughter In-Reply-To: References: Message-ID: <1EED6E3D-B9A3-492C-854F-2ADD7B26F608@gmail.com> Thank you! Sent from my iPhone > On Aug 16, 2020, at 7:42 AM, wisawdust at charter.net wrote: > > ?Nice!!!! > > Duane > > ----------------------------------------- > > From: "Robert Patros" > To: crw-talk at crwoodturner.com > Cc: > Sent: Saturday August 15 2020 9:48:16PM > Subject: [crw-talk] Gift for my daughter > > This piece started out to be 1/3 on top with a 2/3 bottom. Because I didn?t like how it looked, I changed the shape and dimensions. The top produced a small hole I didn?t notice at the time so I put a finial on it. I had turned the finial about 10 years ago. The finish is Minwax Antique Oil and it?s buffed. Hope my daughter likes it. > Really enjoying seeing others? work online. Please keep posting. Just another way to stay in touch. > All the best! > > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From EganR at westerntc.edu Sun Aug 16 07:58:36 2020 From: EganR at westerntc.edu (Egan, Richard) Date: Sun, 16 Aug 2020 12:58:36 +0000 Subject: [crw-talk] Gift for my daughter In-Reply-To: References: <5f390f01.1c69fb81.f1846.3553SMTPIN_ADDED_BROKEN@mx.google.com>, Message-ID: Bob that is a beautiful gift. I know it will be appreciated. I made this gift for my neighbors yesterday. They have a new son. Dan Wilson- what are you doing up at that hour of the morning?? I thought you were retired! Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Robert Patros Date: 8/16/20 7:17 AM (GMT-06:00) To: "Membership mailing list for the AAW Chapter Coulee Region Woodturners." Subject: Re: [crw-talk] Gift for my daughter CAUTION: This email originated from outside of Western Technical College. Do not click links or open attachments unless you recognize the sender and know the content is safe. Thank you. Sent from my iPhone On Aug 16, 2020, at 5:48 AM, jdwilson wrote: ? Nice shape and beautiful finish. Looks like it feels good to hold. Thanks for showing it to us. Sent from my Verizon, Samsung Galaxy smartphone -------- Original message -------- From: Robert Patros Date: 8/15/20 9:48 PM (GMT-06:00) To: crw-talk at crwoodturner.com Subject: [crw-talk] Gift for my daughter This piece started out to be 1/3 on top with a 2/3 bottom. Because I didn?t like how it looked, I changed the shape and dimensions. The top produced a small hole I didn?t notice at the time so I put a finial on it. I had turned the finial about 10 years ago. The finish is Minwax Antique Oil and it?s buffed. Hope my daughter likes it. Really enjoying seeing others? work online. Please keep posting. Just another way to stay in touch. All the best! _________________________________________ Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. ______ crw-talk mailing list crw-talk at crwoodturner.com http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 20200814_172208_resized.jpg Type: image/jpeg Size: 283534 bytes Desc: 20200814_172208_resized.jpg URL: From adrian.novak at charter.net Sun Aug 16 11:10:26 2020 From: adrian.novak at charter.net (Adrian Novak) Date: Sun, 16 Aug 2020 11:10:26 -0500 Subject: [crw-talk] Fwd: ChefwareKits EZJigs Newsletter - Aug 20202 - Sale going on and a new FREE guide to making a Threaded Sphere Box! In-Reply-To: <6420477806840584321141@dell-optiplex-7010> Message-ID: <74999979-7346-4eaf-a070-fcd1fc811781@iPhone> Begin forwarded message: > > From: ChefwareKits Newsletter > Date: Aug 16, 2020 at 9:39 AM > To: Adrian Novak > Subject: ChefwareKits EZJigs Newsletter - Aug 20202 - Sale going on and a new FREE guide to making a Threaded Sphere Box! > > > > > > > > > > > > > > > > > > > > > > > > > > > (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR1A0R) > > > > > > > > > > > > > > Aug 2020 Newsletter > Blessings! > Team ChefwareKits > > > > > > > > > > > > > > > > How to Make a Threaded Sphere Box > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR1BHN) > > > > > > > > > > > > Make a Threaded Sphere Box > > > > A fantastic project which can be made using our EZ Threading Combo Jig! > > > > Easily to follow guide showing you each step of the process > > > > FREE 28 Page Color Guide > Created by Bill Lemke > > > > > > > > Price > Free > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR2Z1L) > > > > > > > > > > > > > > > > > > > > > > > > > > > > EZ Sphere Add-on Kit > > Make a sphere with your EZ Threading Jig > > > > Made in the USA > > > > Now you can make a sphere with your EZ Combo Threading Jig. This kit bolts onto the jig body using 4 bolts which then allows you to pivot over the top of the workpiece to make a sphere. Go ahead make a threaded sphere to really impress your friends! > > Made in USA > > > > > > > > Show Only Price > $99 SAVE BIG > > > > > > Regular Price > $149 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR2ARR) > > > > > > > > > > > > > > > > > > > > > > > > > > > > EZ Threading Add-on Kit > > Cut threads with your EZ Sphere Jig > > > > > Add the ability to cut threads with your EZ Sphere Jig. Your Combo jig already supports this jig add-on! > > > > > > > > Show Only Price > $129 SAVE $70 > > > > > > Regular Price > $199 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR2Ayx) > > > > > > > > > > > > EZ Threading Add-on Spindle > > 16 & 10 TPI Spindles > > > > Add new coarse threading capability to your jig. > > Made in USA > > > > > > > > Show Only Price > $99 SAVE $50 > > > > > > Regular Price > $149 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Basket Weave Illusion Supplies > Unique and Exclusive > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR2BIN) > > > > > > > > > > Basket Weave Illusion Jig > $196 $199 > > > > > > > > > > > > > > > > > > > > (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR3ZIp) > > > > > > > > > > New Basket Illusion Burning Pen Kit > $79 $115 > > > > > > > > > > > > > > > > > > > > (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR3ZyL) > > > > > > > > > > New Basket Weave > Burning Tips > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR3Z1H) > > > > > > > > > > DIY Basket > Weave Illusion Kit > > $65 $89 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > 75% Time Savings > Burn 1 line at a time! > No More Pencil Lines! > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Basket Weave Illusion DIY Kit > $35 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Popular Kits > Popular Woodturning Items > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Steel Index Wheel > 12" dia w/ 1-1/4" hole > > > > Save 25% > > > > Made in USA > $59 $79 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Wood Stabilzation > 7pc Kit > 12in Tall Chamber > > > > > Only $129 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Steel Cribbage > Board Templates > > Made in USA > Great craft > show seller! > > > > > > > > > > > > > > > > > > > > > > > > Featured Videos > YouTube links to many of our jigs > > > > > > > > > (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR3BH8) > > > > > > > > > > > > > > > > > > Open Segment > Jig Overview > > > > > > > > > > > > > > > > > > > > > > Threading a Box > with an EZ Jig > > > > > > > > > > > > > > > > > > > > > > EZ Sphere Carbide Cutter Reivew > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Basket Weave Illusion done in a few nights! > > > > > > > > > > > > > > > > > > > > > > Using a template to make an accurate size sphere > > > > > > > > > > > > > > > > > > > > > > Index Wheel Review > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Unique Products > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > XL 10in Dia > Vacuum Chamber > for Bowls > > $229 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Game Call > Expanding Mandrel Set > > Made in USA > > $149 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Venturi Vacuum Pump which uses an Air Compressor! > > > Made in USA > > $99 $119 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR4BIb) > > > > > > > > > > Crushgrind 18in Kits > > 100pc Bulk Purchase > > Save $8 each > $10 $18 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Wood Stabilization Multi Chamber 7pc Kit > $129 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Hold Fast Vacuum Generator V812 > > > > Save $50 > $99 $149 > > > > > > > > > > > > > > > > > > > > > > > > Combo Savings > Exclusive Offerings > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR1BHN) > > > > > > > > > > > > > > > > > > > > > > > > > > > > EZ Threading Combo Jig w/ Sphere cutter add-on > > > > Easily create perfect wooden threads or a perfect sphere > > > > Quick Setup, Unique Design and Easy to use > > > > w/ Free Wood Carbide > Sphere Cutter > > > > > > > > Price > $397 > > > > > > Regular Price > $419 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Best Sellers > Exclusive Offerings > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR5ZyD) > > > > > > > > > > > > > > > > (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR1A0R) > > > > > > > > > > > > > Removable Jig Banjo Base > > > > Perfect for a Router or Dremel > > -Threaded Solid Steel 1"dia Post > - Base is screwed to wood platform > - Smart Height Ring Design > > > > Made in the USA > > > > This jig makes is easy to add a horizontal base to your lathe banjo perfect for using a router or Dremel or burning pen. > > > > Optional 3 pack of bases available, too! > > > > > > > > Special > $35 SAVE $15 > > > > > > Regular Price > $50 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR5Z1Z) > > > > > > > > > > > > > > > > (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR1A0R) > > > > > > > > > > > > Steel Index Wheel Kit w/ locking post and spring loaded pin > > - Solid Steel 1" Post > - Spring Loaded Pin > - CNC Machined > > > > Made in the USA > > > > Many customers which have midi lathes have asked for this wheel design. The 12in diameter wheel provides the ring of 192 holes unlike our 10in mini lathe index wheel > > > > > > > > Special 1-1/4in > $129 SAVE $20 > > > > > > Regular Price > $149 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR5AHN) > > > > > > > > > > > > EZ Sphere Jig w/ Wood Carbide Cutter > > > > Now you will always have a sharp edge > > > > Easily repeats the same size > > Made in the USA > > > > > > > > Special > $245 SAVE $20 > > > > > > Regular Price > $265 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR5A08) > > > > > > > > > > > > > > > > > > > > > > > > > > > > EZ Open Segment Jig > > Proven Tailstock Design > > > > Made in the USA > > > > Makes it easy to create open segment pieces up to 20"dia using the same Index Wheel. Mounts in the tailstock making it a quick setup that is precise. > > > > > > > > Special > $79 SAVE $20 > > > > > > Regular Price > $89 > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > Find us on Instagram > > > > > > > > > > > > (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR5BIx) > > > > > > > > > > > > > > > > > > > > > > > > > > > > (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR5BIx) > > > > > > > > > > > > > > > > > > (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR5BIx) > > > > > > > > > > > > > > > Share your pictures using the tag #EZJigs (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGVjZRV) > > > > > > > > > > > > > > > > > > > > > > > > > > > > See more awesome customer pictures on Instagram @EZJigs (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR5BIx) > > > > > > > > > > (http://zswpi.mailtrack.me/tracking/raWzMz50paMkCGLkZwZmZQt1ZwVzMKWjqzA2pzSaqaR9AGtjAQHmBQxmWay2LKu2pG0lAQVjAmL0BGR5BIx) > > > > > > > > > > > ChefwareKits.com - All Rights Reserved > sales at chefwarekits.com - 267 888 6216 - PO Box 531 Merrimack NH 03054 > > > > To be removed from our Newsletter > please send an email to unsubscribe at chefwarekkits.com (mailto:unsubscribe at chefwarekits.com?subject=Unsubscribe) > > > > > > > > > > > > > > > > > > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 1.png Type: image/png Size: 33048 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 2.png Type: image/png Size: 1453 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 3.png Type: image/png Size: 149176 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 4.png Type: image/png Size: 0 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 5.png Type: image/png Size: 70461 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 6.png Type: image/png Size: 59035 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 7.png Type: image/png Size: 742 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 8.png Type: image/png Size: 69263 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 9.png Type: image/png Size: 78995 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 10.png Type: image/png Size: 742 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 11.png Type: image/png Size: 34876 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 12.png Type: image/png Size: 742 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 13.png Type: image/png Size: 1081 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 14.png Type: image/png Size: 50267 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 15.png Type: image/png Size: 249 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 16.png Type: image/png Size: 13351 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 17.png Type: image/png Size: 249 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 18.png Type: image/png Size: 22728 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 19.png Type: image/png Size: 249 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 20.png Type: image/png Size: 38473 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 21.png Type: image/png Size: 249 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 22.png Type: image/png Size: 72263 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 23.png Type: image/png Size: 413 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 24.png Type: image/png Size: 32138 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 25.png Type: image/png Size: 249 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 26.png Type: image/png Size: 37845 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 27.png Type: image/png Size: 249 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 28.png Type: image/png Size: 50158 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 29.png Type: image/png Size: 249 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 30.png Type: image/png Size: 45797 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 31.png Type: image/png Size: 249 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 32.png Type: image/png Size: 1057 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 33.jpg Type: image/jpeg Size: 7058 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 34.png Type: image/png Size: 67610 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 35.jpg Type: image/jpeg Size: 6150 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 36.jpg Type: image/jpeg Size: 7567 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 37.png Type: image/png Size: 95620 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 38.jpg Type: image/jpeg Size: 7000 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 39.png Type: image/png Size: 56967 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 40.png Type: image/png Size: 249 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 41.png Type: image/png Size: 74062 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 42.png Type: image/png Size: 249 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 43.jpg Type: image/jpeg Size: 4535 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 44.png Type: image/png Size: 249 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 45.png Type: image/png Size: 25523 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 46.png Type: image/png Size: 249 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 47.jpg Type: image/jpeg Size: 6726 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 48.png Type: image/png Size: 249 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 49.png Type: image/png Size: 63535 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 50.png Type: image/png Size: 249 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 51.png Type: image/png Size: 1969 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 52.png Type: image/png Size: 79938 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 53.png Type: image/png Size: 35430 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 54.png Type: image/png Size: 742 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 55.png Type: image/png Size: 1969 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 56.png Type: image/png Size: 66825 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 57.png Type: image/png Size: 97370 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 58.png Type: image/png Size: 742 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 59.png Type: image/png Size: 82808 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 60.png Type: image/png Size: 108189 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 61.png Type: image/png Size: 742 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 62.png Type: image/png Size: 84694 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 63.png Type: image/png Size: 742 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 64.png Type: image/png Size: 193433 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 65.png Type: image/png Size: 135012 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 66.png Type: image/png Size: 742 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 67.png Type: image/png Size: 30923 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 68.png Type: image/png Size: 32253 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 69.png Type: image/png Size: 73820 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: 70.png Type: image/png Size: 7803 bytes Desc: not available URL: From griff at mwt.net Sun Aug 16 15:00:26 2020 From: griff at mwt.net (John & Donna Griffiths) Date: Sun, 16 Aug 2020 15:00:26 -0500 Subject: [crw-talk] Gift for my daughter In-Reply-To: <6F4F4C8C-41B1-4DF7-A942-920314822312@gmail.com> References: <6F4F4C8C-41B1-4DF7-A942-920314822312@gmail.com> Message-ID: Nothing like a handmade gift to show our love. Beautiful.? Is it cherry?? Thanks, John On 8/15/2020 9:47 PM, Robert Patros wrote: > This piece started out to be 1/3 on top with a 2/3 bottom. Because I didn?t like how it looked, I changed the shape and dimensions. The top produced a small hole I didn?t notice at the time so I put a finial on it. I had turned the finial about 10 years ago. The finish is Minwax Antique Oil and it?s buffed. Hope my daughter likes it. > Really enjoying seeing others? work online. Please keep posting. Just another way to stay in touch. > All the best! > > > > > > > Sent from my iPhone > > _________________________________________ > Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/ -------------- next part -------------- An HTML attachment was scrubbed... URL: From griff at mwt.net Sun Aug 16 15:02:53 2020 From: griff at mwt.net (John & Donna Griffiths) Date: Sun, 16 Aug 2020 15:02:53 -0500 Subject: [crw-talk] Gift for my daughter In-Reply-To: References: <5f390f01.1c69fb81.f1846.3553SMTPIN_ADDED_BROKEN@mx.google.com> Message-ID: What a nice baby gift.? The family should appreciate it a lot. John On 8/16/2020 7:58 AM, Egan, Richard wrote: > Bob that is a beautiful gift. I know it will be appreciated. > > I made this gift for my neighbors yesterday. They have a new son. > > Dan Wilson- what are you doing up at that hour of the morning?? I > thought you were retired! > > > > Sent from my Verizon, Samsung Galaxy smartphone > > > > -------- Original message -------- > From: Robert Patros > Date: 8/16/20 7:17 AM (GMT-06:00) > To: "Membership mailing list for the AAW Chapter Coulee Region > Woodturners." > Subject: Re: [crw-talk] Gift for my daughter > > CAUTION: This email originated from outside of Western Technical > College. Do not click links or open attachments unless you recognize > the sender and know the content is safe. > > Thank you. > > Sent from my iPhone > >> On Aug 16, 2020, at 5:48 AM, jdwilson