From adrian.novak at charter.net  Sun Sep  2 17:11:45 2018
From: adrian.novak at charter.net (Adrian)
Date: Sun, 2 Sep 2018 17:11:45 -0500
Subject: [crw-talk] Board Meeting
Message-ID: <WmBj1y0014tcLqY01mBjc0@charter.net>

We will be having a board meeting this Tuesday September 4th.  This is the end of our fiscal year and we will be setting budgets for next year at this meeting.  I have asked Phil to prepare a statement of our activity through August 31, 2018.

September and October programs are pretty well set.  We will have some discussion on the November Round Robin and December Christmas Party.

Election of officers is at the October meeting to take office January 1.

Everyone is invited.  We meet at A-line starting at 6PM and are done by 7:30 or so.

Adrian

Sent from Mail for Windows 10

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20180902/f773c30b/attachment.html>

From adrian.novak at charter.net  Sun Sep  2 17:19:41 2018
From: adrian.novak at charter.net (Adrian)
Date: Sun, 2 Sep 2018 17:19:41 -0500
Subject: [crw-talk] Open Shop Night
Message-ID: <WmKf1y0094tcLqY01mKf8x@charter.net>

We are having an open shop night at Duane?s shop on Tuesday nights.  So if you are not at the board meeting this Tuesday (September 4 please come to Duane?s and talk turning, or wood or change of seasons, etc.  

You can also bring your turning problems or thoughts or just hang out with your fellow turners.  
This has been poorly attended.  If we want to benefit in the future we need to use it in the present.
I have attended several times and have not always brought a problem (some say I am a problem) just to talk and see Duane?s stuff.  He has a new lathe.

Adrian

I am thinking of bringing two pieces of wood on the 11th to cut up into bowl blanks.  One is a half log of Butternut and the other is a Cherry Burl.

Sent from Mail for Windows 10

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20180902/3bca208e/attachment.html>

From varum527 at hotmail.com  Tue Sep  4 17:53:23 2018
From: varum527 at hotmail.com (Virginia Green)
Date: Tue, 4 Sep 2018 22:53:23 +0000
Subject: [crw-talk] Fwd: For Coulee Region Woodturners
In-Reply-To: <28B862DA-8D62-4987-AC7F-295B49A2B275@charter.net>
Message-ID: <CO2PR13MB0123CA5042DADB78A862D22B82030@CO2PR13MB0123.namprd13.prod.outlook.com>

I?m posting on behalf of a former member, MIke Henderson. please contact Mike directly if you are interested.
Virginia


This<https://itunes.apple.com/app/apple-store/id922793622?pt=814382&mt=8&ct=how_i_email> is how I Email now


Begin forwarded message:

From: Mike & Kathy Henderson <asterplace at charter.net<mailto:asterplace at charter.net>>
Date: Sep 3, 2018 at 1:51 PM
To: Virginia Green <varum527 at hotmail.com<mailto:varum527 at hotmail.com>>
Subject: For Coulee Region Woodturners

I am cleaning and would like to offer a good deal on the following maple toy wheels:
3/4 inch with 1/8 inch hole  approximately 200
1 inch with 11/64 inch hole  22
1 1/2 inch with 1/4 inch hole ?hundreds?. They shipped 1000 when I ordered 100 and they didn?t want to pay return shipping.
Price negotiable but very cheap!!!!!!

FINE WOODWORKING MAGAZINE
All issues between July/August 1979 # 17 and July/August 2018 #269
FREE but must take all.

Thanks, Mike

Mike Henderson
2808 Aster Place<x-apple-data-detectors://10/1>
Onalaska, WI 54650<x-apple-data-detectors://10/1>
asterplace at charter.net<mailto:asterplace at charter.net>
608-781-1056<tel:608-781-1056>


[cid:0ACE3B2B-F26A-43EE-A0DA-6422BCA26F6F at eau.wi.charter.com]
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20180904/17c63f3f/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_0072.jpeg
Type: image/jpeg
Size: 79528 bytes
Desc: IMG_0072.jpeg
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20180904/17c63f3f/attachment.jpeg>

From EganR at westerntc.edu  Wed Sep  5 21:10:16 2018
From: EganR at westerntc.edu (Egan, Richard)
Date: Thu, 6 Sep 2018 02:10:16 +0000
Subject: [crw-talk] Sept newsletter
Message-ID: <DM5PR03MB24271A48694D217C1EC318F1A4010@DM5PR03MB2427.namprd03.prod.outlook.com>

Members:

Please send items of interest to our membership to be included in the next newsletter. This might be items for sale, an upcoming event, or a photo of something you made from all that wood in Jim Frank's trailer.

Thank you,

Rich Egan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20180906/0f286e62/attachment.html>

From adrian.novak at charter.net  Mon Sep 10 20:54:44 2018
From: adrian.novak at charter.net (Adrian)
Date: Mon, 10 Sep 2018 20:54:44 -0500
Subject: [crw-talk] Tuesday evening
Message-ID: <a1uh1y0054tcLqY011uhwA@charter.net>

In a previous email I said that I was going to Duane?s on Tuesday evening to cut up a butternut and a cherry burl logs for bowls.  I am not able to do that.  I have made other plans.

You sure can take some of your wood there to see how Duane does that.

Adrian

Sent from Mail for Windows 10

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20180910/89aba4a8/attachment.html>

From adrian.novak at charter.net  Tue Sep 11 11:43:31 2018
From: adrian.novak at charter.net (Adrian)
Date: Tue, 11 Sep 2018 11:43:31 -0500
Subject: [crw-talk] Tuesday at Duane's
Message-ID: <aGjU1y0014tcLqY01GjUYC@charter.net>

Plans changed again and I will be at Duane?s tonight.

Adrian

Sent from Mail for Windows 10

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20180911/17884c8b/attachment.html>

From wisawdust at charter.net  Thu Sep 13 07:24:34 2018
From: wisawdust at charter.net (wisawdust at charter.net)
Date: Thu, 13 Sep 2018 07:24:34 -0500
Subject: [crw-talk] FW: Porch Balusters
Message-ID: <b0Qa1y00340nV9Q010Qa3J@charter.net>

I got a call yesterday from someone who had dropped off a baluster at
A-Line. See the e-mail below. If you picked it up or know who did,
please contact Karl below. Thanks.Duane

	-----------------------------------------From: "archrestore" 
To: wisawdust at charter.net
Cc: 
Sent: Wednesday September 12 2018 4:26:54PM
Subject: Porch Balusters

  Duane-   
    As discussed, I dropped of balusters at A-line so somebody in the
turning club could make 14 new ones last fall. They got picked up and
I had a subsequent phone conversation with this person.   
    Have not heard anything, and forgot this person's name and phone
number. If you can help me figure out what it going on, I would
appreciate it.   
    Thanks Much   
    Karl Zenk    ARCHITECTURAL RESTORATIONS   
    (608) 797-5608   

    Sent from my Verizon, Samsung Galaxy Tablet
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20180913/f7b82593/attachment.html>

From kengrunke at gmail.com  Thu Sep 13 17:44:07 2018
From: kengrunke at gmail.com (Ken Grunke)
Date: Thu, 13 Sep 2018 17:44:07 -0500
Subject: [crw-talk] Sept. newsletter
Message-ID: <c7ff9c8c-55f7-a74d-8e00-064d27891094@gmail.com>

Here is the latest newsletter from Rich, a bit late (my fault, not 
Rich's). Reviewing his demo on inside/out turning, news and images from 
the Great River Folk Fest, plus many fine turnings by members in the 
instant gallery.

Fetch it from the index page at

http://www.crwoodturner.com/files/index.html

Or grab the file direct if that works for you:

http://www.crwoodturner.com/files/newsletters/2018/crw2018-9.pdf

Ken Grunke
CRW webmaster


From adrian.novak at charter.net  Fri Sep 14 12:18:49 2018
From: adrian.novak at charter.net (Adrian)
Date: Fri, 14 Sep 2018 12:18:49 -0500
Subject: [crw-talk] Meeting tomorrow
Message-ID: <bVJo1y0074tcLqY01VJoXN@charter.net>

We are having a Wood Turners Meeting tomorrow.  We will see you at 8:30 or so.
Our program is Kaleidoscopes with Steve Kittelson.

Setup tonight of 2 TVs, 2 cameras library and coffee at 6:30.  Your assistance is needed and appreciated.

Adrian

Sent from Mail for Windows 10

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20180914/a908e38d/attachment.html>

From rjpatros05 at gmail.com  Thu Sep 27 18:54:58 2018
From: rjpatros05 at gmail.com (Robert Patros)
Date: Thu, 27 Sep 2018 18:54:58 -0500
Subject: [crw-talk] Homemade Jamieson hollowing system for sale.
Message-ID: <15C6CFF7-357D-4330-9DA8-ED5BFE6A508D@gmail.com>



Sent from my iPhone


From rjpatros05 at gmail.com  Thu Sep 27 22:58:38 2018
From: rjpatros05 at gmail.com (Robert Patros)
Date: Thu, 27 Sep 2018 22:58:38 -0500
Subject: [crw-talk] Homemade Jamieson for sale
Message-ID: <1D84ACD1-8326-48C8-A284-90DE8BD19300@gmail.com>

I have a homemade Jamieson system for sale. Will need your own 3/4? bar and cutter. I am getting a different system. E-mail back if interested. 
Bob Patros 

Sent from my iPhone

From adrian.novak at charter.net  Fri Sep 28 09:07:51 2018
From: adrian.novak at charter.net (Adrian)
Date: Fri, 28 Sep 2018 09:07:51 -0500
Subject: [crw-talk] This months Chalenge
Message-ID: <h27r1y0044tcLqY0127rSL@charter.net>

Bob Patros would like to display our creations at Gunderson Clinic  So I have changed the presidents challenge.
See Bob?s note following.

In the past, I have set up displays at Gundersen. I would like to do it again, with a theme. I would like to suggest a Presidents challenge for goblets and platters. If there are enough pieces, I would then arrange to have them displayed at Gundersen in La Crosse. Then, maybe Onalaska Clinic.

Adrian

Sent from Mail for Windows 10

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20180928/6178f7c4/attachment.html>

From rjpatros05 at gmail.com  Fri Sep 28 09:51:23 2018
From: rjpatros05 at gmail.com (Robert Patros)
Date: Fri, 28 Sep 2018 09:51:23 -0500
Subject: [crw-talk] This months Chalenge
In-Reply-To: <h27r1y0044tcLqY0127rSL@charter.net>
References: <h27r1y0044tcLqY0127rSL@charter.net>
Message-ID: <EA24CA47-364D-4707-97CA-3E33FB674483@gmail.com>

I would suggest that if anyone could not meet the challenge timeline, all pieces would be welcomed to be displayed before I set up. I have not contacted Gundersen yet so don?t have a date to shoot for. It would probably be in a few months. 

Sent from my iPhone

> On Sep 28, 2018, at 9:07 AM, Adrian <adrian.novak at charter.net> wrote:
> 
> Bob Patros would like to display our creations at Gunderson Clinic  So I have changed the presidents challenge.
> See Bob?s note following.
>  
> In the past, I have set up displays at Gundersen. I would like to do it again, with a theme. I would like to suggest a Presidents challenge for goblets and platters. If there are enough pieces, I would then arrange to have them displayed at Gundersen in La Crosse. Then, maybe Onalaska Clinic.
>  
> Adrian
>  
> Sent from Mail for Windows 10
>  
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20180928/0534bf01/attachment.html>

From raaschb at charter.net  Fri Sep 28 12:40:49 2018
From: raaschb at charter.net (Bob Raasch)
Date: Fri, 28 Sep 2018 12:40:49 -0500
Subject: [crw-talk] This months Chalenge
Message-ID: <h5gp1y00B3deacq015gq7G@charter.net>

An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20180928/fed379e1/attachment.html>

From griff at mwt.net  Fri Sep 28 17:25:52 2018
From: griff at mwt.net (John & Donna Griffiths)
Date: Fri, 28 Sep 2018 17:25:52 -0500
Subject: [crw-talk] This months Chalenge
In-Reply-To: <h27r1y0044tcLqY0127rSL@charter.net>
References: <h27r1y0044tcLqY0127rSL@charter.net>
Message-ID: <6b10f4b0-95e8-b8e4-b461-1b873567da0e@mwt.net>

Great idea.? After reading this email, I went and mounted up a platter 
to be finish turned.? (But turning the lathe on will have to wait till I 
rest up, maybe in the morning.)? A shout out to Jim Frank on this, the 
platter will be made from one of the cherry cores he donated.? Thank You 
Jim!? John


On 9/28/2018 9:07 AM, Adrian wrote:
>
> Bob Patros would like to display our creations at Gunderson Clinic? So 
> I have changed the presidents challenge.
>
> See Bob?s note following.
>
> In the past, I have set up displays at Gundersen. I would like to do 
> it again, with a theme. I would like to suggest a Presidents challenge 
> for goblets and platters. If there are enough pieces, I would then 
> arrange to have them displayed at Gundersen in La Crosse. Then, maybe 
> Onalaska Clinic.
>
> Adrian
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for 
> Windows 10
>
>
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20180928/ead4ce53/attachment.html>

From rjpatros05 at gmail.com  Sat Sep 29 06:19:58 2018
From: rjpatros05 at gmail.com (Robert Patros)
Date: Sat, 29 Sep 2018 06:19:58 -0500
Subject: [crw-talk] This months Chalenge
In-Reply-To: <6b10f4b0-95e8-b8e4-b461-1b873567da0e@mwt.net>
References: <h27r1y0044tcLqY0127rSL@charter.net>
	<6b10f4b0-95e8-b8e4-b461-1b873567da0e@mwt.net>
Message-ID: <D8BE9532-31A4-41F0-BE61-B47BDF3E3E07@gmail.com>

Another thing to mention. All platters will need their own stand. It would be best if they were all consistent for the display. Adrien, would  the club purchase them? I would take the lead to buy them once I knew how many we needed. 

Sent from my iPhone

> On Sep 28, 2018, at 5:25 PM, John & Donna Griffiths <griff at mwt.net> wrote:
> 
> Great idea.  After reading this email, I went and mounted up a platter to be finish turned.  (But turning the lathe on will have to wait till I rest up, maybe in the morning.)  A shout out to Jim Frank on this, the platter will be made from one of the cherry cores he donated.  Thank You Jim!  John
> 
>> On 9/28/2018 9:07 AM, Adrian wrote:
>> Bob Patros would like to display our creations at Gunderson Clinic  So I have changed the presidents challenge.
>> See Bob?s note following.
>>  
>> In the past, I have set up displays at Gundersen. I would like to do it again, with a theme. I would like to suggest a Presidents challenge for goblets and platters. If there are enough pieces, I would then arrange to have them displayed at Gundersen in La Crosse. Then, maybe Onalaska Clinic.
>>  
>> Adrian
>>  
>> Sent from Mail for Windows 10
>>  
>> 
>> 
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
> 
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20180929/b090645b/attachment.html>

From moorecheck at gmail.com  Sat Sep 29 09:06:31 2018
From: moorecheck at gmail.com (Daniel Check)
Date: Sat, 29 Sep 2018 09:06:31 -0500
Subject: [crw-talk] This months Chalenge
In-Reply-To: <D8BE9532-31A4-41F0-BE61-B47BDF3E3E07@gmail.com>
References: <h27r1y0044tcLqY0127rSL@charter.net>
	<6b10f4b0-95e8-b8e4-b461-1b873567da0e@mwt.net>
	<D8BE9532-31A4-41F0-BE61-B47BDF3E3E07@gmail.com>
Message-ID: <CANhL+YSHzDsFv_BwV+uLYq7JKyqwq707V=wDRAYTJQQDv87=kw@mail.gmail.com>

The stands I had at the folk fest were bought on amazon. Demco economical
easel stands. $1.99 each. Better price on quantity buys. I recommend them.
Dan Check.

On Sat, Sep 29, 2018 at 6:20 AM Robert Patros <rjpatros05 at gmail.com> wrote:

> Another thing to mention. All platters will need their own stand. It would
> be best if they were all consistent for the display. Adrien, would  the
> club purchase them? I would take the lead to buy them once I knew how many
> we needed.
>
> Sent from my iPhone
>
> On Sep 28, 2018, at 5:25 PM, John & Donna Griffiths <griff at mwt.net> wrote:
>
> Great idea.  After reading this email, I went and mounted up a platter to
> be finish turned.  (But turning the lathe on will have to wait till I rest
> up, maybe in the morning.)  A shout out to Jim Frank on this, the platter
> will be made from one of the cherry cores he donated.  Thank You Jim!  John
>
> On 9/28/2018 9:07 AM, Adrian wrote:
>
> Bob Patros would like to display our creations at Gunderson Clinic  So I
> have changed the presidents challenge.
>
> See Bob?s note following.
>
>
>
> In the past, I have set up displays at Gundersen. I would like to do it
> again, with a theme. I would like to suggest a Presidents challenge for
> goblets and platters. If there are enough pieces, I would then arrange to
> have them displayed at Gundersen in La Crosse. Then, maybe Onalaska Clinic.
>
>
>
> Adrian
>
>
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows 10
>
>
>
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
> ______
> crw-talk mailing listcrw-talk at crwoodturner.comhttp://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
> _________________________________________
> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
> only to sender.
> ______
> crw-talk mailing list
> crw-talk at crwoodturner.com
> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
> Check the archive to make sure your message was sent:
> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20180929/0edb7cb8/attachment.html>

From moorecheck at gmail.com  Sat Sep 29 09:07:59 2018
From: moorecheck at gmail.com (Daniel Check)
Date: Sat, 29 Sep 2018 09:07:59 -0500
Subject: [crw-talk] This months Chalenge
In-Reply-To: <CANhL+YSHzDsFv_BwV+uLYq7JKyqwq707V=wDRAYTJQQDv87=kw@mail.gmail.com>
References: <h27r1y0044tcLqY0127rSL@charter.net>
	<6b10f4b0-95e8-b8e4-b461-1b873567da0e@mwt.net>
	<D8BE9532-31A4-41F0-BE61-B47BDF3E3E07@gmail.com>
	<CANhL+YSHzDsFv_BwV+uLYq7JKyqwq707V=wDRAYTJQQDv87=kw@mail.gmail.com>
Message-ID: <CANhL+YTXeYvmv4gZe1t99nvsqrwOFxDrewkhRCj4BVfTCSGmow@mail.gmail.com>

Sorry. They were bought at Demco. Library supply store

On Sat, Sep 29, 2018 at 9:06 AM Daniel Check <moorecheck at gmail.com> wrote:

> The stands I had at the folk fest were bought on amazon. Demco economical
> easel stands. $1.99 each. Better price on quantity buys. I recommend them.
> Dan Check.
>
> On Sat, Sep 29, 2018 at 6:20 AM Robert Patros <rjpatros05 at gmail.com>
> wrote:
>
>> Another thing to mention. All platters will need their own stand. It
>> would be best if they were all consistent for the display. Adrien, would
>>  the club purchase them? I would take the lead to buy them once I knew how
>> many we needed.
>>
>> Sent from my iPhone
>>
>> On Sep 28, 2018, at 5:25 PM, John & Donna Griffiths <griff at mwt.net>
>> wrote:
>>
>> Great idea.  After reading this email, I went and mounted up a platter to
>> be finish turned.  (But turning the lathe on will have to wait till I rest
>> up, maybe in the morning.)  A shout out to Jim Frank on this, the platter
>> will be made from one of the cherry cores he donated.  Thank You Jim!  John
>>
>> On 9/28/2018 9:07 AM, Adrian wrote:
>>
>> Bob Patros would like to display our creations at Gunderson Clinic  So I
>> have changed the presidents challenge.
>>
>> See Bob?s note following.
>>
>>
>>
>> In the past, I have set up displays at Gundersen. I would like to do it
>> again, with a theme. I would like to suggest a Presidents challenge for
>> goblets and platters. If there are enough pieces, I would then arrange to
>> have them displayed at Gundersen in La Crosse. Then, maybe Onalaska Clinic.
>>
>>
>>
>> Adrian
>>
>>
>>
>> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
>> Windows 10
>>
>>
>>
>>
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>> ______
>> crw-talk mailing listcrw-talk at crwoodturner.comhttp://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>
>>
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
>> only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent:
>> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>
>> _________________________________________
>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes
>> only to sender.
>> ______
>> crw-talk mailing list
>> crw-talk at crwoodturner.com
>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>> Check the archive to make sure your message was sent:
>> http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20180929/a2ffd24f/attachment.html>

From rjpatros05 at gmail.com  Sat Sep 29 12:43:42 2018
From: rjpatros05 at gmail.com (Robert Patros)
Date: Sat, 29 Sep 2018 12:43:42 -0500
Subject: [crw-talk] This months Chalenge
In-Reply-To: <CANhL+YTXeYvmv4gZe1t99nvsqrwOFxDrewkhRCj4BVfTCSGmow@mail.gmail.com>
References: <h27r1y0044tcLqY0127rSL@charter.net>
	<6b10f4b0-95e8-b8e4-b461-1b873567da0e@mwt.net>
	<D8BE9532-31A4-41F0-BE61-B47BDF3E3E07@gmail.com>
	<CANhL+YSHzDsFv_BwV+uLYq7JKyqwq707V=wDRAYTJQQDv87=kw@mail.gmail.com>
	<CANhL+YTXeYvmv4gZe1t99nvsqrwOFxDrewkhRCj4BVfTCSGmow@mail.gmail.com>
Message-ID: <810322EA-1B5A-4948-8486-B022044A26FE@gmail.com>

Thanks, Dan. 

Adrian, what do you think? Want to get approval at the next board meeting to purchase some? 

Given the capacity of the display case, I think it would hold comfortably no more than 20 platters ( just guessing). If we go through Demco, that would be about $40 plus tax/shipping. Again, we want them all the same style/color.

Please let me know how you want me to proceed once there is a decision.

Thanks! 

Sent from my iPhone

> On Sep 29, 2018, at 9:07 AM, Daniel Check <moorecheck at gmail.com> wrote:
> 
> Sorry. They were bought at Demco. Library supply store
> 
>> On Sat, Sep 29, 2018 at 9:06 AM Daniel Check <moorecheck at gmail.com> wrote:
>> The stands I had at the folk fest were bought on amazon. Demco economical easel stands. $1.99 each. Better price on quantity buys. I recommend them. 
>> Dan Check. 
>> 
>>> On Sat, Sep 29, 2018 at 6:20 AM Robert Patros <rjpatros05 at gmail.com> wrote:
>>> Another thing to mention. All platters will need their own stand. It would be best if they were all consistent for the display. Adrien, would  the club purchase them? I would take the lead to buy them once I knew how many we needed. 
>>> 
>>> Sent from my iPhone
>>> 
>>>> On Sep 28, 2018, at 5:25 PM, John & Donna Griffiths <griff at mwt.net> wrote:
>>>> 
>>>> Great idea.  After reading this email, I went and mounted up a platter to be finish turned.  (But turning the lathe on will have to wait till I rest up, maybe in the morning.)  A shout out to Jim Frank on this, the platter will be made from one of the cherry cores he donated.  Thank You Jim!  John
>>>> 
>>>>> On 9/28/2018 9:07 AM, Adrian wrote:
>>>>> Bob Patros would like to display our creations at Gunderson Clinic  So I have changed the presidents challenge.
>>>>> 
>>>>> See Bob?s note following.
>>>>> 
>>>>>  
>>>>> 
>>>>> In the past, I have set up displays at Gundersen. I would like to do it again, with a theme. I would like to suggest a Presidents challenge for goblets and platters. If there are enough pieces, I would then arrange to have them displayed at Gundersen in La Crosse. Then, maybe Onalaska Clinic.
>>>>> 
>>>>>  
>>>>> 
>>>>> Adrian
>>>>> 
>>>>>  
>>>>> 
>>>>> Sent from Mail for Windows 10
>>>>> 
>>>>>  
>>>>> 
>>>>> 
>>>>> 
>>>>> _________________________________________
>>>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>>>>> ______
>>>>> crw-talk mailing list
>>>>> crw-talk at crwoodturner.com
>>>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>>>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>>> 
>>>> _________________________________________
>>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>>>> ______
>>>> crw-talk mailing list
>>>> crw-talk at crwoodturner.com
>>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
>>> _________________________________________
>>> Use "Reply to All" or "Reply List" to reach the whole group, "Reply" goes only to sender.
>>> ______
>>> crw-talk mailing list
>>> crw-talk at crwoodturner.com
>>> http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com
>>> Check the archive to make sure your message was sent: http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20180929/e766a93b/attachment.html>

From mogoldfish at yahoo.com  Sat Sep 29 20:25:02 2018
From: mogoldfish at yahoo.com (Kristine Clough)
Date: Sun, 30 Sep 2018 01:25:02 +0000 (UTC)
Subject: [crw-talk] Robust Tools open house
In-Reply-To: <810322EA-1B5A-4948-8486-B022044A26FE@gmail.com>
References: <h27r1y0044tcLqY0127rSL@charter.net>
	<6b10f4b0-95e8-b8e4-b461-1b873567da0e@mwt.net>
	<D8BE9532-31A4-41F0-BE61-B47BDF3E3E07@gmail.com>
	<CANhL+YSHzDsFv_BwV+uLYq7JKyqwq707V=wDRAYTJQQDv87=kw@mail.gmail.com>
	<CANhL+YTXeYvmv4gZe1t99nvsqrwOFxDrewkhRCj4BVfTCSGmow@mail.gmail.com>
	<810322EA-1B5A-4948-8486-B022044A26FE@gmail.com>
Message-ID: <81404503.1462536.1538270703022@mail.yahoo.com>

The Robust Tools open house is Saturday, Oct 6th at their factory.? I plan on attending it with the plans of making a stop at my favorite bakery in Dodgeville on the way.? Does any body want to car pool with me?
Kris
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20180930/63b780e1/attachment.html>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Untitled
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20180930/63b780e1/attachment.ksh>

From adrian.novak at charter.net  Sun Sep 30 10:29:54 2018
From: adrian.novak at charter.net (Adrian)
Date: Sun, 30 Sep 2018 10:29:54 -0500
Subject: [crw-talk] Robust Tools open house
In-Reply-To: <81404503.1462536.1538270703022@mail.yahoo.com>
References: <h27r1y0044tcLqY0127rSL@charter.net>
	<6b10f4b0-95e8-b8e4-b461-1b873567da0e@mwt.net>
	<D8BE9532-31A4-41F0-BE61-B47BDF3E3E07@gmail.com>
	<CANhL+YSHzDsFv_BwV+uLYq7JKyqwq707V=wDRAYTJQQDv87=kw@mail.gmail.com>
	<CANhL+YTXeYvmv4gZe1t99nvsqrwOFxDrewkhRCj4BVfTCSGmow@mail.gmail.com>
	<810322EA-1B5A-4948-8486-B022044A26FE@gmail.com>
	<81404503.1462536.1538270703022@mail.yahoo.com>
Message-ID: <hrVr1y0064tcLqY01rVrG5@charter.net>

I too plan on driving or riding which ever the case.  I have room for a Scout Lathe if needed.

Sent from Mail for Windows 10

From: Kristine Clough
Sent: Saturday, September 29, 2018 8:29 PM
To: rjpatros05 at gmail.com; Daniel Check
Cc: crw-talk at crwoodturner.com
Subject: [crw-talk] Robust Tools open house

The Robust Tools open house is Saturday, Oct 6th at their factory.? I plan on attending it with the plans of making a stop at my favorite bakery in Dodgeville on the way.? Does any body want to car pool with me?

Kris

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20180930/37e33886/attachment.html>

From adrian.novak at charter.net  Sun Sep 30 10:37:07 2018
From: adrian.novak at charter.net (adrian.novak at charter.net)
Date: Sun, 30 Sep 2018 10:37:07 -0500
Subject: [crw-talk] Board Meeting notice
Message-ID: <hrd71y00C1CWhfG01rd7M9@charter.net>

We will be having a board meeting this Tuesday at A-line tools
starting at 6PM See you there.Discussion on election and Christmas
Party and November meeting.
Adrian


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://crwoodturner.com/pipermail/crw-talk_crwoodturner.com/attachments/20180930/d965d950/attachment.html>