From wisawdust at charter.net Fri Jan 5 15:59:54 2018 From: wisawdust at charter.net (wisawdust at charter.net) Date: Fri, 05 Jan 2018 15:59:54 -0600 Subject: [crw-talk] Lathe Help Message-ID: I have another class in Lanesboro next weekend. If you are available I could use help from 1 or 2 people in loading the lathes on Friday, January 12 at about 3 at A-Line. It should take about an hour. Thanks, Duane -------------- next part -------------- An HTML attachment was scrubbed... URL: From EganR at westerntc.edu Wed Jan 10 15:56:00 2018 From: EganR at westerntc.edu (Egan, Richard) Date: Wed, 10 Jan 2018 21:56:00 +0000 Subject: [crw-talk] Jan newsletter Message-ID: Members: I am assembling the first newsletter for 2018. If you have items of interest to share, please forward to me. Thanks, Rich Egan Newsletter guy -------------- next part -------------- An HTML attachment was scrubbed... URL: From kengrunke at gmail.com Mon Jan 15 20:07:58 2018 From: kengrunke at gmail.com (Ken Grunke) Date: Mon, 15 Jan 2018 20:07:58 -0600 Subject: [crw-talk] January newsletter Message-ID: The first newsletter of the new year is available for your perusal, thanks to Rich Egan. The new index page is at the same web address as always: http://www.crwoodturner.com/files/index.html You can forget the webpage name at the end, and you will still get there: http://www.crwoodturner.com/files/ Or you can do a direct download with this URL: http://www.crwoodturner.com/files/newsletters/2018/crw2018-1.pdf Keep warm, everyone! Ken Grunke CRW webmaster From adrian.novak at charter.net Thu Jan 18 20:15:35 2018 From: adrian.novak at charter.net (Adrian) Date: Thu, 18 Jan 2018 20:15:35 -0600 Subject: [crw-talk] Meeting on Saturday and Setup Message-ID: <02Fa1x00K4tcLqY012FbNi@charter.net> The board of Directors request that and sales made at the meeting (we have a buy, sell or trade table) a donation of 10% be given to the club. We have some major moving around to be done for Saturday?s meeting. We will be taking down the tables and setting up 3 lathes and the grinder for the round robin presentations. Your help is needed. On Friday evening we meet at 6:30 and with enough help we should be done in less than an hour. Saturday?s meeting will have 5 stations for you to see several different demonstrations of wood turning and related work. If you have a tool that you would like to see sharpened on the grinder please bring it to the meeting. Adrian Sent from Mail for Windows 10 -------------- next part -------------- An HTML attachment was scrubbed... URL: From EganR at westerntc.edu Mon Jan 29 18:47:44 2018 From: EganR at westerntc.edu (Egan, Richard) Date: Tue, 30 Jan 2018 00:47:44 +0000 Subject: [crw-talk] Feb newsletter Message-ID: Members: If you have any items of interest to the membership, please pass them on to me to be added to the next newsletter. Thanks, Rich Egan -------------- next part -------------- An HTML attachment was scrubbed... URL: From props at charter.net Tue Jan 30 15:52:13 2018 From: props at charter.net (Paul Rops) Date: Tue, 30 Jan 2018 15:52:13 -0600 Subject: [crw-talk] [Crw-talk] Tool Geometry , And the Cutting Edge by Lyndal Anthony In-Reply-To: <8cbc370e-6bd2-00c7-4cb7-596425c61791@gmail.com> References: <8cbc370e-6bd2-00c7-4cb7-596425c61791@gmail.com> Message-ID: Does anyone have a fixture to mount an angle grinder or router to form the dished out portion of a wooden spoon? Paul Rops --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus From kenearlg at gmail.com Tue Jan 30 20:35:32 2018 From: kenearlg at gmail.com (Ken Grunke) Date: Tue, 30 Jan 2018 20:35:32 -0600 Subject: [crw-talk] [Crw-talk] Tool Geometry , And the Cutting Edge by Lyndal Anthony In-Reply-To: References: <8cbc370e-6bd2-00c7-4cb7-596425c61791@gmail.com> Message-ID: <6e5d8275-4eff-9a8f-0da5-049049730d9d@gmail.com> These are kinda rough, but you could try turning them: http://www.token.crwoodturner.com/New/IMG_0072.JPG http://www.token.crwoodturner.com/New/IMG_0075.JPG A pair of spoons, or a spoon and a scoop. The smaller the opening you can turn the inside through, the better shape for the spoon's bowl. Ken On 01/30/2018 03:52 PM, Paul Rops wrote: > Does anyone have a fixture to mount an angle grinder or router to form the > dished out portion of a wooden spoon? > > Paul Rops > > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > > _________________________________________Use Reply to All to reach the whole group, Reply goes only to sender. > ______ > crw-talk mailing list > crw-talk at crwoodturner.com > http://crwoodturner.com/mailman/listinfo/crw-talk_crwoodturner.com > From kvosslerwi at aol.com Wed Jan 31 08:40:05 2018 From: kvosslerwi at aol.com (kvosslerwi at aol.com) Date: Wed, 31 Jan 2018 09:40:05 -0500 Subject: [crw-talk] Fwd: Chair Repair In-Reply-To: References: Message-ID: <1614ca915f7-170f-da65f@webjas-vae202.srv.aolmail.net> Marlene contacted me about getting a chair repaired. If anyone is interested in the work, please contact her either thru her email or phone number below. Thanks, Kevin Vossler -----Original Message----- From: Marlene Hutter To: kvosslerwi Sent: Tue, Jan 30, 2018 6:23 pm Subject: Chair This youth chair is likely over 100 years old since I believe my 103 year old dad used it, as well as my generation, the next, and now we hope this 4th generation will too, if one of you can help us. It?s perfect for a 2-4 yr old, once out of a regular high chair. The legs extend approx. 20 1/2 inches. Any questions? please email: tao4tnow at gmail.com or call: 608-781-8121. Thanks for your consideration of this project! Marlene -------------- next part -------------- An HTML attachment was scrubbed... URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG-0141.JPG Type: image/jpeg Size: 2597596 bytes Desc: not available URL: